After suffering a fractured talus bone injury in my right foot (I'm regular footed), my pop was gone,... thus ending my skateboarding career. Since I couldn't ollie more than a couple inches off the ground, all I can do is basic mini-ramp and slappy tricks. On a good day, I can do no-pop shuv-its. This ramp is the PERFECT RAMP for me. I don't have to pop very hard into anything I attempt and I love that I can put 4 together to make a mini-mini, which will give me back my grinds, stalls, etc. I'm 45 and will be able to skate like I was 10 back in 1990. The public parks are great, but you can't try any tricks safely, and at my age, that's really important. Something this small will help give me the comfort and confidence to ride again. Will be ordering when my income tax check comes in!
@TRAVIESO_NA5 ай бұрын
I tore my ACL in 2021 Healed all year 2021 and was able to get back on my board in 2022. Had no Pop. None till now 2024. I got it back by scaling up to the biggest set up I could find and the most Heaviest Parts. Skated a ''10 inch popsicle 169 Titanium Indy's, and Huge 75mm OJS.'' Now I scaled down my set up to a ''8.25 Inch Deck, 144' INDY Forged Hollows, 48mm Spitfires" I got my pop now. Something happened after like a year of skating a huge board, I learned to Pop it, its all about timing and foot placement and speed. I scaled down to that little board and now I can ollie like almost 2 feet high. for me that's huge gains. lol Just a thought for you! Scale up your set up as big as you can handle, than skate it for a year. than scale down.
@thickenstein5 ай бұрын
Good shit. I like the doggy hanging out, wanting to be included in the sesh.
@sway_onthetrail5 ай бұрын
Man this thing looks so sick. I have 2 kids just getting into skating, great for them to build confidence on and looks like a blast to play on.
@KeithSkates5 ай бұрын
Crazy idea #3042 : Angle iron coping on the back side, so you can use it as a regular ledge by turning it around.
@Laidbackskater915 ай бұрын
I thought that’s what they were going to do tbh
@danielwoo10035 ай бұрын
They talked about it
@JasonVorce5 ай бұрын
Would have been cool to see the curb cover in action on it
@DomDemolition7375 ай бұрын
Exactly my second thought as I saw this obstacle... 😊
@JasonVorce5 ай бұрын
@@DomDemolition737they even mentioned it. Would have been nice to see how it reacted movement-wise.
@PressureFlipperZ5 ай бұрын
Keen ramps keep killin 💯
@PureOutlet5 ай бұрын
As somebody personally trying to start a business, I was actually curious about how well you guys do as a company and in comparison to how much it costs to run everything, thanks for sharing!!
@ryedaddy16752 ай бұрын
Great to see from scratch to skate and then new tricks ❤😊 respect
@darth_kired4 ай бұрын
This looks fun as hell. Don't know if you planned this into the design, but that looks like it be a dope extension for a steep bank
@zachdixon45975 ай бұрын
That nose grind was so fucking butter!!
@fearthereaper8e2 ай бұрын
This is great for beginners and kids, I can put this on my mini ramp and my kids can build confidence dropping in and riding the opposite transition.
@sergiopstudio5 ай бұрын
Looks fun guys! Our local has a similarly sized "mini mini" and it's probably the most popular obstacle.
@DomDemolition7375 ай бұрын
That's sick, dude... I'm planing on building an beginners obstacle for my 5yo mini me, that I can put in my trunk to drive to the local mall parking lot... Think I'm gonna add an angle iron on the corner to take it as a mini box... Thanx Corey and ya'll at keen!
@skatedad97945 ай бұрын
Super cool. Ive been skating two years and this is looks just the thing for me
@Armistice0232 ай бұрын
This is slick. I have the perfect spot in my backyard to make one of these myself. I’d prob do a 6’ one. I just wish mild steel wasn’t so damn expensive. Depending, I got space to make 2 for a mini pipe
@ryanrowe19755 ай бұрын
Looks so good
@chris73brown5 ай бұрын
Exactly. For me this is the funnest type of skating. Like u said, u can put yourself into & think of cool combos that u normally wouldnt think of cause its so user friendly. Just like that allyloop fakie 5 0 u did. That was sick & u can take stuff like that even farther like to sugarcane etc. Super fun
@OldManTheseDays4 ай бұрын
That looks like a lot of fun. A long time ago, I built a 6 foot wide quarter that was about 1,5 feet tall with a deep deck. Funnest ramp I ever built. This reminds me of that. It was such a good ramp to learn lip tricks.
@PMurray26945 ай бұрын
2 of the 4ft sections across from each other to make a mini mini ramp
@Inexpressable5 ай бұрын
then if you recreated it for fingerboards it'd be a mini mini mini ramp.
@fakiewilly5 ай бұрын
This one is a great idea as my favorite obstacle at a diy is exactly this but with the cinder blocks like you were saying. So sick. Too Rad for mom & dad.
@mcbedeakin5 ай бұрын
Great work Team
@Aaad4315 ай бұрын
Thanks y'all made the ramps a my local skate park
@no_genre765 ай бұрын
this thing looks fun. what is the radius on the transition?
@ByTheGrave5 ай бұрын
6:16 I was JUST about to comment how you could add something on the back too so you have an extra ledge option Would definitely be a nice addition for beginners so you don't have to Ollie up and over the face of the ledge
@thedude118905 ай бұрын
What's the transition radius on these?
@brandonlavoie56315 ай бұрын
Also curious
@TylerHalterman2 ай бұрын
Same.
@shaddzz5 ай бұрын
I am really wanting to get this transition ledge along with the slapstick and am about to pull the trigger. Does the lack of metal at the front like a QP has effect rolling in to it at all? is that an option? putting in a garage
@PlywoodFiend5 ай бұрын
It’s kind of like when an architect builds a small model first then does it on a larger scale🔥⚒️
@drunit81225 ай бұрын
Whats recommended wheel size to get a grind in?
@fakiewilly5 ай бұрын
@keenramps what radius is good for that 12" high quarter pipe?
@bluehouse14024 ай бұрын
What are dimension of the mini quarter?
@lvup7907Ай бұрын
some copping on the back of that lil quarter would be cool
@ras0ne2 ай бұрын
What's the transition radius on that, 6 feet?
@32srt325 ай бұрын
does it fit in the trunk?
@raidervillalobos64575 ай бұрын
Super rad idea. Cant speak for everyone but in my experience 4 ft is too short to use as a ledge. My slap stick was too short to use when trying slappies. Cant imagine griding and using the transition unless its at least 6 feet wide
@raidervillalobos64575 ай бұрын
Seriously top notch quality products though!! Crazy easy to put together too
@GetSwifty2 ай бұрын
Watched a few of your videos now and you guys talk a lot about pricing and costs in each one. I’d pull back on that a bit as it detracts from the content. Let’s see it built and skated. Would make for a far better demo/ad for each product you’re showcasing.
@GoSkateLouisa5 ай бұрын
man I want this its been in my cart and then I got the email and the text. Y'all on it!!!!
@GoSkateLouisa5 ай бұрын
actually can ya'll just text my wife 😜
@JohnnyMac7273 ай бұрын
Its more like a really mellow Quarter pipe/Bank with coping…. For that price point it should definetly have coping on the backside of it so you can actually skate it as a ledge and not just as a mellow quarter/bank i definetly wouldn't consider this a ledge by any means
@g2daferndizleАй бұрын
No wait this is my next project 😂
@32srt325 ай бұрын
6ft is the shortest length for a ledge. 4 feet is too short!
@T0MA2EN5 ай бұрын
thats a eighth pipe
@zchd5 ай бұрын
daleee
@KooKaRoach7275 ай бұрын
Overhead is a motherr efferr 329 is a great deal u cant beat it ..sure u can have your neibors carpenter biuld u janky one for 250 butt this crafted by professionals
@spaceistheplace22935 ай бұрын
this isn't that hard to build yourself. just take your time with your templates and it'll turn out fine.
@Sk8Riffer5 ай бұрын
First
@jimmymartine32285 ай бұрын
second
@jeebscrusts13215 ай бұрын
insane the people that work at a fuckin skate ramp industry have more work benefits and rights than i do as a chef. nuts
@fuckmyego4 ай бұрын
Why is that insane? You think that you're better than people who "work at a fuckin skate ramp" company? Are you better or more deserving or something? Don't put down the labor of others, they are obviously professionals too. Sounds like they were smart enough to find an employer that values their work, maybe you should do the same if you feel that you aren't being compensated fairly. Goodluck.
@likeSK85 ай бұрын
I actually APPRECIATE the fact that you went into over head costs etc cause I always think “I would love to order xyz but they charge way too much” but what you said makes sense and I am more apt to support now that I understand that it’s awesome product AND you take good care of your employees 🔥🤙🏼🛹