R@L Tip! AAA (FNA - Simpson/Dewalt) pressure washer pump valve body removal tip!
Рет қаралды 3,580
Жыл бұрынToday we offer a tip for removing the stubborn plastic valve bodies from AAA pumps that are used on FNA pressure washers, sold under various brands such as Simpson and Dewalt. In today's case it is on a Dewalt pressure washer.
Subscribe and follow! Let me know if you want more content like this.
@karlmann6969 8 ай бұрын
Great idea for removing the valves. For those that just spin I found using a #5 screw extractor and some light hammer taps to set it also works well.
@weltonnagringa Ай бұрын
Hi buddy I bought some replace valves but the inside valves that connect with the rest of the water pump looks does not keep stuck on the bottom like the other I removed it looks like the exact same size but if I shake hard it falls is that normal ?
@davehiggins5903 Ай бұрын
Whats the price of the valve kit cost? I see the price of a new pump is 100$
@michaelobrien4245 7 ай бұрын
I had the same problem but with almost all of them...i used a slightly to big drill bit hammered it in and just wiggled back and forth... eventuality loosened up and bingo....to me i was surprised how cheap the parts were...all six like $15.(amazon)...runs better than new .great vid .....
@themaestro5338 3 ай бұрын
Very helpful until you were no longer pointing the camera at what you were trying to show us.
LOGAN
Рет қаралды 62 М.
James Bubnick
Рет қаралды 46 М.
livetofish Outboard Repair
Рет қаралды 139 М.
D-MAN Winder Outdoor Power
Рет қаралды 51 М.
James Bubnick
Рет қаралды 12 М.