Mechanic Tricks: Ripoff or Righteous? YOU decide! Toyota Camry 2017

Рет қаралды 4,056,494

2 жыл бұрын

Flood Damage Begins! Warranty VOID! Used a Drill on a Seat?? 2019 Dodge Challenger 6.4 • Flood Damage Begins! W...
Visit RainmanRaysRepairs.com for more or
Support the Channel with a Like and Subscribe!
Become a Channel Member or Patreon at: / rainmanraysrepairs
Visit our Second Channel on KZfaq, RainmanRay Off Duty / rainmanrayoutoftheshop
Follow on Twitter: @RainmanRay4Real
TikTok: www.tiktok.com/@rainman_rays_repairs
More at RainmanRaysRepairs.com
Check out my Merchandise shop for Men's and Women's Apparel, MUGS and Stickers! rainmanraysrepairs.myspreadsh...
Support the channel on Patreon: / rainmanraysrepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage for now
Amazon List, must have for any toolbox!
1: Astro Tools 52SL 500x2 Lumen Wirelessly Rechargeable Folding Double-Sided LED Slim Light, & 52SLC 500x2 Lumen Folding Double-Sided LED Slim Light W/Wireless Charging Pad amzn.to/3Jd2h6t
2: Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 amzn.to/3OJTRp2
3: NOCO E404 12.25 Oz Battery Terminal Cleaner Spray and Corrosion Cleaner with Acid Detector amzn.to/3ILbdjv
My Camera Gear:
Gopro Hero 10 amzn.to/3AaxELe
Hero 9&10 Dual Battery Charger MUST HAVE! amzn.to/3g5KdAT
Flexible Camera Mount amzn.to/3Jywrk5
#brakecleanmafia #wifeunit #rainman #comnissionearned #mechanic #technician #dealer #independent #autorepair
As an Amazon Associate I earn from qualifying purchases.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
”Intro Music by Karl Casey @ White Bat Audio”
Thanks to Jesse for making the intro and graphic for us to enjoy!!!
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”
Customer Customer States Mechanic Fails Engine Transmission Gas Diesel off road race 4x4 street car daily driver scam dealership dealer technician how to

Пікірлер: 5 200

@RainmanRaysRepairs 14 күн бұрын

Who’s still here in 2024??

@afisemenaborevlaka48 13 күн бұрын

Fully unvaccinated and still here.

@moonlander03 12 күн бұрын

I love ur videos Rainman,. Have learned a lot.. 💪💪💪👍👍👍👍

@bobkillion9681 2 күн бұрын

Still kicking. I can’t believe you didn’t destroy the box buddy…lol

@hazlo99 21 сағат бұрын

Hell yeah!!....I miss the doodedoo doo..

@davidsee3553 Жыл бұрын

To do this job correctly you need to remove the bracket and move the brake line out of the way. The additional six hours is the estimated time to find your 10mm socket.

@AffirmativeAndrew 3 ай бұрын

No, I think the 7 hours comes from someone that collects the paycheck and doesn't actually do the work and pays their mechanics $25 an hour or less.

@DennisFrechette-et6gg 2 ай бұрын

🤣🤣🤣

@stevewayne3676 Ай бұрын

Lol😅😅😅😅😅😅😅

@n3rdst0rm 2 жыл бұрын

"Little does this control arm know my ability to escalate the levels of violence is unmatched" Best quote of 2022 right here. 10/10

@jcg1732 2 жыл бұрын

Totally agree.. i couldnt stop laughing! 🔥💯

@jamesgrant7784 Жыл бұрын

Mazda 3's Ahhhh

@cavalieroutdoors6036 Жыл бұрын

When all else fails: get a bigger hammer.

@stevenmartin7380 8 ай бұрын

I remember when I was younger I got a quote to change the spark plugs on my car It was going to be like $800 because they said they had to disconnect the engine from the mounts and lift it up and all this I did it myself in 15 minutes you could just reach right behind the engine and do it but then there are those jobs that say they take an hour then you run into all kinds of problems and ends up taking the whole day

@DeyTookOurJobs Жыл бұрын

I just want to thank all mechanic's who make these videos on different vehicles. You have no idea how much it helps DIYers Watching how it's done saves me so much time!

@Samally9 2 жыл бұрын

Can we all just appreciate how much work this man can get done with one hand!!

@RonnyJakobsson 2 жыл бұрын

If he just had longer arms he could repair 2 cars at the same time.

@Cheepchipsable 2 жыл бұрын

The other hand is under developed due to using a power tool all the time - however the trigger finger on that hand is enlarged significantly.

@mikeznel6048 2 жыл бұрын

Can we just watch the video and not tell others what to do?...

@mikeznel6048 2 жыл бұрын

@@Cheepchipsable That sht is no joke. Even if you switch sides, one side is always stronger, or bigger, because of that.

@SteveMasonCanada 2 жыл бұрын

Must. Not. Make. Innapropriate. Reply.

@Will_b83 2 жыл бұрын

I’ll tell you a funny story. My brother is a master mechanic for Mack…now he’s in parts and device for Vanguard. He like you would find ways of finagleing things around to be much more efficient for his customers and himself. He got so good at cutting his time down and moving on to the next job that other guys in the shop started bitching about him to the office until his supervisor allied him in. He asked him why it wasn’t taking nearly as long to do the same repairs other guys were doing…my brother told him he knew ways of doing them faster without compromising the work. And added if none of his work is coming back to leave him alone.

@LJT9393 Жыл бұрын

And so did they take him outta the shop or fire him cause the company wasn’t making stupid amounts of labour rates? Cause that’s how stingy a lot of the dealerships are.

@Will_b83 Жыл бұрын

@@LJT9393 they finally promoted him! So now he’s in a office

@mobilemechanicmitch1269 Жыл бұрын

Some people have ways to “think outside the box” I have never understood how this is unappreciated. Keep in mind. We as auto technicians seem to have are easy jobs and then are miserable ones. They tend to work out evenly. The most important part is to be fair and adjust quotes as needed. I had a 3 hours job take me 12 hours the other day. A customer complained about the up charge and could not understand. Nice to have a video to back up your work because it’s sometimes hard to explain. Overall I ate most the labor and won’t be working on her vehicles any longer. The other day she learned the hard way. Gave me a call for a pair. So happened to be a water pump on a Tahoe. I have a way to cut this job down by a couple hours and regularly charge customers less. I spoke to a local shop who finally did her repair and asked what they charged. They do good work. I had a good laugh to myself and asked him if he wiggled the pulley out and left the fan shroud the way I have done it so often 😂🎉. Of course no. She paid 2x what I would have charged… Do honest work and you have good karma and if things do not go well then simply refuse work for certain customers. I apply this to all jobs. I have the best part time job ever now. All do to honest work.

@LJT9393 Жыл бұрын

@@mobilemechanicmitch1269 so you’re an auto technician, and cause of one customer leaving you now have a part time job? I’m confused

@jomo8527 Жыл бұрын

So where's the funny part??

@bayliner6296 Жыл бұрын

Good Man. I truly appreciate your work and honesty at the workplace helping people. We need good people and mechanics like you in our society.

@maddhatter3564 10 ай бұрын

I for one became a mechanic because i never trusted shops. In my life i've seen there are a few good mechanics still out there that wont rip you off but its still hard to know upfront.

@ornentertainment4755 2 ай бұрын

I’ve been following this guy on and off for over two years and every time I watch his videos I appreciate his honesty and integrity with his work 😎💯

@nitrodasnipaz9392 2 жыл бұрын

"I've already established I'm not taking this axle out so this is just how it's gonna go" I feel like every mechanic can relate deeply to this.

@Rhythm911 2 жыл бұрын

:))))) If the 7 hour claim was legit, not something else, then the guy they timed to base it on is a moron !! @Just Sayin' :D

@jayemayyalldamnday 2 жыл бұрын

Yeah that was my decision the second time I took my tranny out, so I could replace a synchronizer, bad idea, but mostly because I didn't have a tranny jack

@dpz9872 2 жыл бұрын

@@jayemayyalldamnday Harbor Freight $89.99 with the super coupon available in the ad paper at the front door . They are janky poorly made in China 💩 but they are usable. Was able to lift Turbo 400 into place by myself. 👌

@BobbyTucker 2 жыл бұрын

@@Rhythm911 , You have to know how they figure the time schedules on these repairs. You should know more about what they do and how many times each repair is done and timed before getting into the name calling.

@Rhythm911 2 жыл бұрын

@@BobbyTucker And what makes you think that I don't know!!!??? I guess you think you're psychic !?!!? :))))))))))))

@jameskenney5623 2 жыл бұрын

Being an ASE certified Auto mechanic, people just don't understand that special tools also cut down on time. I totally agree with your statement of not telling people how long the book called for and how long it took you but at the same time flat rate is there for a reason and buying special tools combined with your knowledge goes a long ways. One of my favorite sayings is you aren't paying me for the 30 minutes it took to do the job you're paying me for the 30 years it took me to be able to do the job in 30 minutes.

@MrSullione Жыл бұрын

Giving you the thumbs up because you nailed it.

@530Issa Жыл бұрын

It didnt take you 30 years to do it in 30 minutes lets be real

@530Issa Жыл бұрын

Ill just pay the guy who does it in 15 minutes with 15 years of experience

@jameskenney5623 Жыл бұрын

@@530Issa okay snowflake would it make you feel better if I said it took me 5 years to be able to do the job in 5 minutes? 10 years to be able to do the job in 10 minutes or do you prefer odd numbers like 5 years to do the job in 10 minutes or maybe one year to do the job in 8 minutes. Ultimately it doesn't matter, someone learned a skill in x amount of years that enabled them to do the job in x amount of time.

@530Issa Жыл бұрын

@@jameskenney5623 I dont care how much experience you have im not gonna pay you extra just because you have more experience. And i dont think its right to charge someone for 30 years of there time. That saying sucks

@JayAlastor Жыл бұрын

"Im not taking the axle out" for like 20 times while he is being stubbon a true mechanic love the vids!

@theeasykaybreezy5347 6 күн бұрын

The difference between a good honest mechanic and getting done at a stealership. Rainman restores our faith in the trade and lets us join his adventures or misadventures. Thanks Brother

@AB-jk7tw 2 жыл бұрын

Always impressive to watch a pro make challenging repairs look easy.

@cryingleftists2290 Жыл бұрын

Let's give him a Michigan car and see if he can make it look easy.

@Confirm_selection Жыл бұрын

A pro??? This guy has about 20 years to go.

@jondebohun9194 Жыл бұрын

a pro uses a torque wrench, can pin up properly, and doesnt use a gun on everything, etc.

@anthonyperez2416 Жыл бұрын

To all: bet your pro has all parts right! Arms legs etcetera etcetera! Now I'm from Missouri, so SHOW ME! Really show me, you've seen mine! Doubters! Unbelievers!

@user-ux2zp2ly1k 6 ай бұрын

A pro would read instructions in servicecmanual first. The 7 hour suggested labor time may include a 4 wheel thrust alignment, which could account for a couple of hours. Looks to me like job would have been easier removing brake rotor to access ball joint. Then would gave not needed to remove ball joint from new arm. He did not compare new parts to old prior to disassembly. Definately a rookie mistake. Using air- electric rachets instead of breaker bsrs is a good way to destroy expendive tools. I speak from 45 years experience in field.

@hiramram1075 2 жыл бұрын

Well done bro.👏 Not only did you make it look easy, you also made watching this 30 minute video not boring with your charismatic personality. Keep up the great work. 👍

@thomasheussen4668 Жыл бұрын

Well I don't know who they learn this crapy work, must be in a school somewhere in hilly Billy land, I don't see any torque wrench nor torqueing the bolds to specs, neither seeing he is aligning the wheels back to specs, there is a reason why they have 7 hours on it. Oh yeah you gone tell e he used an impect wrench and that is torqueing enough, here's the news flash, NO IT'S NOT. I wish the owner good luck with this repair and in the event of a fatal car crash I hope and pray they will find the root cause and get this mechanic of the street, for good.

@shitboxenthusiast1557 Жыл бұрын

@@thomasheussen4668 who?

@world_reborn1990 Жыл бұрын

@@thomasheussen4668 okay mad man

@jamesroark7093 Жыл бұрын

I can't tell if Thomas is joking or not...

@kiwiingenuity1677 Жыл бұрын

@@jamesroark7093 Sadam hussein he's surely a troll ray isn't a hack.

@DandDHenry Жыл бұрын

Great job showing how a job can be done completely without costing an unreasonable amount of labor time. You made that job look easy. Thanks for the video

@tazzthedoodle7861 Жыл бұрын

He's still charging the customer the 7 hours. Because he worked smart he will still get full book time.

@Dustii91 Жыл бұрын

My man, I just want to say it's a pleasure watching someone with your methodology work, immediate solutions to multiple problems. I'm just an average Joe who does a service + brakes. I love watching stuff like this. Keep up the good work mate

@tatatonio 2 жыл бұрын

This was the best 33:53 mins I've spent in awhile! You're an incredible mechanic, and honest to boot! Blessings brother!

@donotwantahandle1111 2 жыл бұрын

They were quoted 7 hrs to do that job? Either a dodgy mechanic or a 1st year apprentice with a hangover!

@christianpowell9976 2 жыл бұрын

@@donotwantahandle1111 Or the worst of all... a dodgy, drunk apprentice. 🤪

@michaelf.2449 2 жыл бұрын

@@christianpowell9976 more than likely that's the maximum it could take and it's better to overshoot the repair time than under pay someone because the vehicle is in the rust belt and no bolts will come undone and you have to do it by the book to be able to get the bolts loose.

@chris76-01 2 жыл бұрын

I wish all mechanics were as good as him. 😁

@k1llersm0ke32 2 жыл бұрын

I was gonna say, what shop does he work at? I would’ve found my new mechanic that I’d take my car to if he was anywhere in my area

@Captain0Beaky 2 жыл бұрын

We had a problem when I worked in R&D for Jaguar. Dealers were not following the procedure to change the faulty shifter. They were not changing the whole part ( shifter and pedestal), just the shifter. It saved about 20 mins max ( and the book time was way more than doing it the right way would take), but dealers knew best... Problem is, the cable outer connection was on the pedestal, and the shifter was set at a specific calibrated position on the pedestal, ( and the mechanism was really sensitive - which was the root cause) So the “new” shifter would apparently fail quickly ( it wouldn’t be in alignment) but in reality, it wasn’t in the right position on the pedestal! Then the dealer would change out the “new faulty” shifter again, using the wrong procedure, and round the merry go round we would go, with the understandably annoyed customer. We only realised this when the returned shifters were missing the pedestals when we investigated the returned parts. It caused a massive and expensive headache. Sometimes, there’s a reason for the book procedure that isn’t obvious.

@brettralston3599 2 жыл бұрын

I was thinking the same thing. For example, the engine should not be moved like that. It can damage the other mounts. Im sure the 7 hours is accounted in moving the engine properly. Easy way to know is look up the procedure not just the time.

@anticat867 2 жыл бұрын

I'm definitely not a mechanic but watched a lot of air crash investigations. Seeing the engine in this position made me very uncomfortable.

@craiglyles4755 2 жыл бұрын

Checked on Toyota TIS, , the 7.5 hours is for control arm replacement with engine removal. It only pays 2 hours with the engine installed. With that said, the 2 hour procedure still calls for dropping the sub frame and using an engine support so that you can gain access to the hardware with a torque wrench on reassembly.

@jimr549 2 жыл бұрын

He also didn't look under the hood to see if anything was being pushed by the engine like a brake fluid reservoir or some other important thing.

@jamesbuttery3862 2 жыл бұрын

@@jimr549 that's what I was thinking when he was pushing it up more...it was only up like 3 inches above it's regular height though. I dunno. Not a horrible mistake

@paulkurilecz4209 Жыл бұрын

For every job like this, there is a job out there that is the complete opposite. When I was working as a mechanic in the 70's, an Oldsmobile Toronado came in that needed the A/C compressor replaced. That was a straightforward job and the time in the book was adequate. The problem was with replacing the refrigerant drier which was located in front of the condenser. The book said 0.7 hours for R&R for the refrigerant drier. The only problem was in order to R&R the refrigerant drier, the entire front grill of the car had to come off, a five hour job by the clock. Because the time book made no reference to needing to R&R the front grill to R&R the drier, I had to eat the five hours. We even called the a local Oldsmobile dealership and asked them how to R&R the drier and they confirmed that the front grill had to come off to do it and yes, it only pays 0.7 hours. They handled the problem by drawing straws as to who got the job/

@UncleRobsGarage 2 ай бұрын

Watching you is a pleasure your upbeat attitude is contagious.

@Rags722 2 жыл бұрын

Brave man. Jack engine with hood closed. I kept expecting to see a power bubble in the hood when the car came down.

@PatBuckleyracecar 2 жыл бұрын

Exactly my thoughts too! Or a hose or wire connector pulled loose. Thats when the 7 hours comes in.

@kristopherdetar4346 2 жыл бұрын

Been knuckle tearing wrenches for nearly 50 years and talk to the components just the way you do without a camera. Great job !!

@vincentiocco2007 2 жыл бұрын

Now is talking to it sound like this @/$÷×&%$#@! ???

@UFC_Buffalo 2 жыл бұрын

Same here lol, the guys like to remind me that I'm talking to myself lol.

@1Bohimyme Жыл бұрын

@@UFC_Buffalo not a problem untill yourself argues back atleast that is what i tell my guys at work

@UFC_Buffalo Жыл бұрын

@@1Bohimyme lol yea, I'm not _quite_ there yet. Another boating season, or 2, and I'm sure I'll be having full-blown fights with myself 🤣.

@platty9237 Жыл бұрын

Some of us do it with software components, too. Crazy

@David15585 Жыл бұрын

All my life I have done all of my own vehicle repairs. You name it, valve jobs, engine rebuilds, brakes, cooling systems, etc. At 70 years old, and the complexity of cars today, I'll take to a guy like Ray! Rainman Ray knows what he is doing and he does it honestly! Thanks Ray!

@Confirm_selection Жыл бұрын

How would someone r&r a control arm dishonesty?

@kenwillis8487 Жыл бұрын

Very easy for shops to do any job without honesty! Recently I was told that they were going to pull my intake to replace oil pressure sensor on my suburban! The owner told me at 4:00 that it wasn’t going to be done that day , then at 5:00 called me and said one of his guys with small hands was able to reach it! They still charged me $400 had I known that price up front ( and the fact that on the way home it would shut off showing no oil pressure) I would of declined repair and fixed myself. I only had them doing it in the first place cause they already had it there to do oil pan gasket and rear main seal as I don’t have a lift!

@lucastrask2838 Жыл бұрын

Department of redundancy department, Firesign theater from back when they were funny. I love watching your videos. I worked the line, then tune up, gravitated to service writer... before I moved to parts where I didn't have to clean my hands ten times a day and eat 'transmission fluid' tasting sandwiches. Went to retail Auto parts management where I could make a decent living with out the labor and dirt. Retired, and opened my own restoration shop, low output. Twenty builds in eight years, just enough to keep the lights on and enjoy life. Watching you troubleshoot brings back some great memories. Keep up the good work.

@evilkidd174 2 жыл бұрын

Book states, "This job will take 7 hours to complete". Ray with an evil laugh, "Foolish book you have no power here".

@BixbyConsequence 2 жыл бұрын

"Nothing is written!" - Lawrence of Arabia

@aaronwilliams1249 2 жыл бұрын

My guess is that it's so Toyota dealerships can line their pockets. I've personally seen this several times when I owned a Prius.

@NemoConsequentae 2 жыл бұрын

"My will is as strong as yours, and my kingdom as great. You have no power over me." Sarah, _Labyrinth_ Also Ray, _Workshop_

@dirtyblueshirt 2 жыл бұрын

"Do not cite the Deep Magic to me, Witch! I was there when it was written." - Ray

@AaronStevensaj 2 жыл бұрын

7 hours? challenge accepted 'your future hasn't been written yet, no one's has. Your future is whatever you make it, so make it a good one.' Doc Brown

@whitetailjedi 2 жыл бұрын

The "department of redundancy department" 😂 I'm not even sure you caught it as you said it but I'm still awarding 94 proficiency points because I had tears and may have peed a little😂 You sir win supremely crafted comment award of the day and are a splendid human! BTW my middle finger stays like that most day while I'm at work as well so no worries, are totally forgiven and are awarded 7 bonus points for elevated coolness factor!

@christianpowell9976 2 жыл бұрын

So glad someone else appreciated that fine word smithing. I even wrote it down so I wouldn't forget to use it later.

@whitetailjedi 2 жыл бұрын

@@christianpowell9976 Write it down twice so it's redundant, thats what I'd do... again😎🤘🤣

@georgemartin5980 Жыл бұрын

"department of redundancy department" is classic, it's like reprinting paperwork to read "complies with the paperwork reduction act".

@KeithHeinrich Жыл бұрын

10 points to Gryffindor for that one. Well played.

@michaelpressman7203 Жыл бұрын

When people at work used to give me the one-figured salute I tell him yeah I'm still number one thank you very much

@johnscreekmark Ай бұрын

Always a pleasure to see a top-notch mechanic at work!! 👍

@robertwhalley4266 5 ай бұрын

Ya, I have the backyard manual also.( less tools) Used my car jack to get 2010 Accord axle nut off. The only hold up. About 40 min. Good work.

@JohnSmith-nh2xl 2 жыл бұрын

Ray is concerned about flipping us off, then proceeds to give us the double-bird at 27:54 😂 Love your content, Ray. Instant Sub. 👏

@redactedlogic4901 2 жыл бұрын

Lmao didn't notice the one he pointed out and completely missed this one as well....to damn funny. Thanks

@JohnSmith-nh2xl 2 жыл бұрын

@@redactedlogic4901 There is another instance later in the video, but I wrote the comment before finishing the clip and didn’t capture that timestamp. 😂

@auntbarbara5576 2 жыл бұрын

Lol yes he did, if he became a flight attendant in another life he'd fail the "pointing at the exits" part.

@nathanaelspurlin2234 2 жыл бұрын

The fact that he has to worry about that, so disappointing.

@lavuy6744 2 жыл бұрын

also says 200k people and of course yt picks this video to reach almost a mill at current time

@ricks5984 2 жыл бұрын

Back in my flat rate days, we called that a true GRAVY job. Every mechanic deserves those now an then!!

@robertholderman7552 2 жыл бұрын

Yes because they usually take much much Longer

@Earthenfurry 2 жыл бұрын

I also second this

@matthewi.minnick5845 2 жыл бұрын

I'll third it. I did a 3.3 hr water pump in 20 minutes. The customer was mad as heck. My boss showed them the book time. Funny, the customer was in a hurry to get it done, but upset about the bill ...

@vincewolpert6166 2 жыл бұрын

Every now and then you need that major win to offset those days you wounder why you ever thought it was a good idea to get into this line of work. Many of my wrenches have learned to fly a time or two.

@matthewi.minnick5845 2 жыл бұрын

@@paperman9708 personally I find it commendable what you do. I operate the same way when I do ATV/motorcycle repair jobs in that I charge for either the time it should take or actually takes, whichever is less. I surely understand why people get upset. I know I would. That's why I do as many repairs myself as I can.

@Duskydawg Ай бұрын

Ray, you rock, humor helps. Worked flat rate for years, once in a while you get an opportunity to beat book time. Makes up for all the times you took it in the shorts!

@OzChell Ай бұрын

Ray is the man in, straight to the point, honest, and shows you how it’s done the right way.

@dwansbo 2 жыл бұрын

I used to laugh at the "flat rate" manual for a well known Japanese brand of marine engine. The time allowed for each job assumed the engine was in a fully equipped workshop with all the correct tools to hand. No allowance was made for the fact that the engine was only accessible by standing on your head in a boat which could only be reached by dinghy after a long drive. Due to the salt water invirononment every nut bolt and stud would put up a fight. Luckily your car appeared in new condition, had it seen a couple of winters on salted roads the job would turn out a lot different! Nice work though.

@therecalcitrant1316 2 жыл бұрын

Ah, yes! The tedious life of an outboard marine mechanic... Salt and 'loomium!

@DaveC2729 2 жыл бұрын

I have a relative who owns a boatyard. Despite having a fully-equipped shop, I more than once saw him or one of his guys upside down in the back end of a boat trying to do something without having to extract the engine. They didn't do that for something as simple as an oil change though, they had this vacuum system that could suck the oil pan dry through the dipstick tube.

@KKhhoorrnniittee Жыл бұрын

There is a reason "flat rate" is called "flat rape" by some mechanics (-!

@tonymunn 2 жыл бұрын

I see where quality tools make a difference. Great work and great tools.

@kenmoats3654 Ай бұрын

Amazing honest work from a great mechanic

@tomcrotty1498 Жыл бұрын

There’s probably a lot of errors in book time that probably can go either way. By not charging the book time I’m sure the management has a problem with that. Having said that I now understand why they let you go. Honesty has no place in the corporate world. Great job Ray. Glad you’re on your own. Life will be a lot less complicated in your own shop and family matters. Again, best wishes and will enjoy all your future videos.

@OscarLopez-gq4he Жыл бұрын

depends on the service writer and what was quoted for hours

@Patrickf5087 3 ай бұрын

@@OscarLopez-gq4hecorporations lije governments dislike saving people money

@Kitkat5335 2 жыл бұрын

This reminds me of when I was a teenager and decided for mothers day I would fix up my moms honda accord lxi. I took it to a shop to get one of the parts I just didn't have to tools to get done (OIL* pan due to exhaust and cross member in the way) and told the shop that was all I wanted done. I already had about 300 or 400 worth of parts I was going to replace at home to include much of the rear suspension which was independent suspension, water pump and gasket, and several parts in front end suspension. They tried to get me to have them do all the work saying the car was unsafe to leave the shop. I told them just do what I asked, so they did and had me sign a waiver to get the car back. I then spent the day replacing all the parts in question and when done took it back to the shop to have alignment checked since tires were new too. The shop asked me who did the work so fast and for what price. I told them I did and they tried to offer me a job which I turned down. Told them I didn't have the tool sets for that kind of job, and I had learned many ways to get jobs done to include how Ray is skipping recommended steps to get the job done faster. I guess they just thought I was some ignorant teenager when I showed up. If they only knew by that point I was in an auto-collision repair class at vocational school and had been working on cars since I was 9. *I stand corrected on a 20 year old memory. It was an oil pan, but instead of saying 'Maybe you meant Oil pan' given the description of the job, some decided it was better to use that as a reason to discredit the series of events like typical internet trolls.

@SM-yq1dr 2 жыл бұрын

We did all suspension parts on our 08 Sierra just a couple months ago. Had the same thing happen. Went for alignment and Joel offered the husband a job on the spot. We're just self taught and shade tree summer day people.

@JoeMamasLover69 2 жыл бұрын

Trans pan? On a Honda. Thats bs. Sorry bud haven't seen one yet

@Kitkat5335 2 жыл бұрын

@@JoeMamasLover69 1989 Honda Accord Lxi pan is blocked from removal due to low ground clearance and removal of the exhaust pipe. The gasket was leaking and needed to be replaced. At the time all I had was one jack, no lift, no jack stands, and a fairly basic mix and match tool set. With no way to get the additional clearance I needed it was a job out of my ability. Especially after spending several hundred dollars on other parts. The mechanic wanted to declare it unsafe due to the water pump leaking and the state of the suspension. The independent suspension in the rear end was nearly falling a part due to worn bushings and bad ball joints in the front end. If you think I meant the mechanic was impressed by the trans pan removal, you didn't read properly. The shop did the pan gasket. I did all the front/rear suspension and water pump/gasket. I brought it back to the shop for alignment in roughly a 24 hour turn around time. As this was roughly 20 years ago I may be confusing it with the oil pan, but I do remember clearly that the exhaust pipe ran straight down the center of it and I could barely fit my arm up to the shoulder under the car without a jack, and wasn't about to get halfway under the car without jack stands for safety reasons.

@mikem.9197 2 жыл бұрын

@@Kitkat5335 That's not what he meant. I'll let you figure it out.

@Kitkat5335 2 жыл бұрын

@@mikem.9197 The problem Mike, is he called BS instead of correcting a mistake about a car I worked on 20 years ago. Telling someone to figure out their mistake in a memory doesn't make them right, and doesn't make what happen a lie. Just like when I started in construction and everyone thought it cute dad brought his little girl to work until she was the one hanging the drywall, laying out the framing, doing the stomp on a texture. Just like it was impossible I was a Lieutenant in Corrections, or that I worked in IT at Hewlett Packard for four years. I've done a lot in my life, so expecting me to remember a minute detail about a car that belonged to my mother 20 years ago, or that it surprised a chauvinist mechanic that a teenage girl knew how to fix a car, let alone the majority of the suspension as a gift. Please, do get over yourself and 'figure it out' mentality.

@TheCorpsehatch 2 жыл бұрын

Bonus Fact: The green and blue dots seen at 1:47 are for part identification and correct orientation during part assembly in the parts plant. Sometimes vehicle assembly uses the dots to properly locate the orientation of the part for installation. I work in a plant that makes anti-vibration parts for vehicles.

@HornyTaurney 2 жыл бұрын

thanks for sharing your knowledge. Much love from australia

@Oh-Jay52 2 жыл бұрын

Alignemet by man or laser guided robot ? (seems kinda space age but a relevant question lol)

@TheCorpsehatch 2 жыл бұрын

@@Oh-Jay52 Usually both. During part assembly it's mostly lasers and cameras inside the assembly machine. Vehicle assembly is likely for the person to alliign the part correctly. Sometimes laser/camera. Color dots are also used to identify two parts that look identicle but have different bushings. The wrong part installed on the wrong part of a vehicle can cause major issues even though it fits.

@Oh-Jay52 2 жыл бұрын

@@TheCorpsehatch Love it when someone knows exactly why and can give 1st hand knowledge to others , Good Man , Thanks mate

@TheCorpsehatch 2 жыл бұрын

@@Oh-Jay52 Color dots are even used to identify two or more bushings that look the same or have slightly different appearences. At a quick glance those similar bushings will look identicle. This is to insure there are no mixed parts prior to assembly.

@daniel.c2501 3 ай бұрын

Excellent work! Professional Mechanical Engineering at its finest!!!

@DamnImDead Жыл бұрын

Awesome job man, I love working on my vehicles and when I'm unable to and have to take it to a shop it kills me how much they beat you up on the price knowing what the job requires, keep up the good work and stay safe.

@bustin7052 2 жыл бұрын

I truly thank you for being such a professional through the whole video. You added humor to it and there was no foul language through it. I could tell you're not really that old but you seem to have a way to know the shortcuts that a lot of older mechanics know.

@junglekutz5625 2 жыл бұрын

It's a breathe of fresh air to come across and or work with someone that knows what they're doing.

@MrGaute59 2 жыл бұрын

Close to 50 yrs of fixing norwegian cars makes me envious of seeing Rays clean and non-corroded repair jobs.

@SwankyMcGee 2 жыл бұрын

Here in AZ you never have to worry about it either. Never ever gets humid enough for a long enough period to do really any noticable rusting, even our old classics have really good body/frames

@autoazure 2 жыл бұрын

Same goes in Scotland! I was amazed at the lack of even superficial corrosion!

@Jbmc65 Ай бұрын

What I appreciate about Ray is his honesty. If Ray had the cash to buy himself a 6 bay shop and hire only good people he would make over a couple million his first year. Many people are searching for a good honest place to get their cars fixed. What we have seen other shops do on their quotes in FL. Plus in NY with Eric is another very honest man. (South main auto). Eric has his wife at the shop in the office like Ray has started, that way the money stays in the family. All the best Buddy.

@battleangel5595 6 ай бұрын

Absolutely love how you can find cost saving shortcuts for your customers when applicable. Personally I'm the same when it comes to fixing PCs in the healthcare industry. IF i have the parts on hand to turn around a dead PC in 2 hours with troubleshooting, obtaining spare parts, spinning screwdrivers, parts replacement, MOAR spinning screw drivers, re-imaging, and getting it back on the floor. Pretty much I'm our department's Chief Engineer Montgomery Scott.

@krzykris 2 жыл бұрын

I have an engineering degree and an MBA, work as a manager in a large manufacturing company. Your videos make me long to be a mechanic. Do what you love and you'll never work a day in your life. I am a "shade tree mechanic" and love every project. I can certainly relate to looking for a dropped piece of hardware and not finding a tool you just had in your hands. You are an outstanding mechanic. Thanks for sharing your craft. I appreciate it.

@probegt75 Жыл бұрын

Why does every engineer have let everyone know they're an engineer? I don't get it.

@krzykris Жыл бұрын

@@probegt75 I was just trying to convey that people should do what they love and that money doesn't matter after a certain point. My degrees didn't bring me fulfillment in work. I would have been much happier as a mechanic because I love solving problems and actually doing the work to fix them, instead of just telling someone else what to do. Now, I'd be a fool to take less money, but I would've been happier with a different career. You sound like you think you could've achieved more academically. It's not too late. In any case, don't be bitter.

@robertbullcarmichael9856 2 жыл бұрын

Protecting the paying customers one customer at a time. Good job Ray!

@davidd1492 2 жыл бұрын

I'll bet the smash repair shop still charged the customer or insurance the 7 hours.

@slyfox4564 2 жыл бұрын

@@davidd1492 charge based on rhe book. Sometimes it takes less time and sometimes it takes more time.

@midniteoyl8913 2 жыл бұрын

Insurance will still pay what they quoted for the job.

@craiglyles4755 2 жыл бұрын

@@davidd1492 Insurance paid that body shop before it even went to to the quick lube place so any discounts from ray flat rating the job only increased the body shops margin and opened up the quick lube place for liability having skipped the sub frame and subsequent torque procedure. Also the book time of 7.5 hours is for replacement with engine removal, it only calls for two hours with engine installed.

@lalajee143 Күн бұрын

Seeing no rust brings joy. 🥰

@bradleyhupp6433 Жыл бұрын

I been a wrench twister for 50 years. Had to do my share of using one hand to get to things.God bless you for handling the camera and getting the job done with the other hand.

@kerbyoverton3235 2 жыл бұрын

You're a master of your trade. I hope that I can find a mechanic as worthy as you. Keep up the good work And great entertainment.

@jwness34 2 жыл бұрын

I wish I could work with you! “The department of redundancy department” LOL. Your skill, your attention to detail, and your excellent attitude deserves to be compensated to the full extent. Especially if the time includes the realignment. You are a wonderful technician and a stellar human!

@Maxim.Teleguz 2 жыл бұрын

I don’t think he wants to work with you. Let me explain: mechanics want to work alone as much as possible.

@DSPNWtoCali 2 жыл бұрын

@@Maxim.Teleguz and able to talk out loud. Lol.

@kramnull8962 2 жыл бұрын

@@Maxim.Teleguz Yeah, 2 people under the same car is like slow dancing...

@mrg4169 2 жыл бұрын

work for less ..yeah sounds like a great idea !!

@use-ThatIsWhatIamTalkingAbout 2 ай бұрын

An enthusiastic mechanic who seems to enjoy his work 👍👍👍

@Daniel_Antonio_Arellano782 Жыл бұрын

Good to see somebody who knows what they're doing. Do their thing. I wish I was this knowledge about mechanical work.

@brucecoleman7412 2 жыл бұрын

Johnson’ First Law of Auto Repair: Any tool or part dropped will roll to the geographic center of the vehicle or otherwise most inaccessible spot. When dealing with body shops who are dealing with insurance companies, the insurance companies are going to pay by their chosen flat rate manual. When you charge the body shop less than the posted flat rate, they will almost always charge the insurance companies the amount that they approved to pay. The body shop will pocket the difference, not you. If it was reversed and the flat rate was 1.5 hours and it took you 7, they are going to go by the book and you lose. Flat rates have a way of balancing out. Sometimes you win, sometimes you lose. Overall it’s a pretty fair way of doing things and creating uniformity. If it was a customer paying out of pocket, I would absolutely give him a break.

@rrfields65 2 жыл бұрын

The Insurance Flat Rate of 7 hrs. is based upon that all of the Strut / CV axle / Lower arm & engine shock mount would have to be R&R'd with No Power Tools & jacked up on a single jack-stand !

@brucecoleman7412 2 жыл бұрын

@@rrfields65 That may be true, but it doesn’t change the fact that that is the amount that THEIR estimate allowed and they authorized to pay. Make no mistake, somebody is going to get paid the 7 hours. It will be you OR the body shop. Insurance companies figure estimates based on installing new parts but many times spec out used ones. In a lot of cases those used parts arrive to the tech bolted to other parts and/or in bad need of serious cleaning before they can be used. The tech typically doesn’t get paid for this. Book rates also don’t account for parts that are bent making them more difficult to remove. I would more happily see the tech get the windfall as opposed to someone who merely passed a piece of paper.

@rrfields65 2 жыл бұрын

@@brucecoleman7412 : Absolutely !!! If I did this job ? { and I was a ASE line Tech for GM, Ford, Mopar, Honda } and did complete R&R of the Lower, and did it in say 2 hrs. ! I'm collecting the pay for the authorized 7 hrs. , Because TOOLS of TRADE aren't Cheap - and neither is my body & mind !

@Abesta83 2 жыл бұрын

This.

@aaronthomas6155 20 күн бұрын

@@rrfields65 If you worked for Ford, ASE certifications would be utterly useless. Ford has it's own certification program and hasn't recognized ASE for more than a decade.

@ronchappel4812 2 жыл бұрын

I love it when things go easier than expected. There's no shortage of the opposite happening!

@alexisalvarado8062 3 ай бұрын

You just have a right sense of humor for any job. You very expirience mechanic awesome

@445cat 2 жыл бұрын

What I love about Ray: His daily content uploads, inteligent diagnostics and conversation and unfailingly calm and upbeat demeanor. What I dislike: The use of mr. boost tactics to get into the algorithym. But I’m glad he uses them because I wouldn’t have found him otherwise.

@davidwright1653 2 жыл бұрын

How do you know this??

@erik_dk842 2 жыл бұрын

His titles are sometimes to much like Scotty Kilmer's clickbait

@jimsiggy 2 жыл бұрын

He probably loves the fact that you love the videos, more than you love the fact he puts them out. Guessing, he makes as much on ad revenue every few days, as he makes on a 7-hour book rate job that takes an hour.

@CED99 2 жыл бұрын

@@davidwright1653 title of the video is "Warning video may offend you" which is pretty clickbaity

@Tacompton425 2 жыл бұрын

Zero click bait in this title. The question is 7+ hour legit or a ripoff. Disclosure was in first minute or so.

@MrMasonlw 2 жыл бұрын

Step 3: flap the motor mount around for 5 hours and 30 minutes until it removes itself. That's why it takes 7 hours 😂

@eddiec4536 Ай бұрын

Nice job to see a professional at work.

@TheRealRenn 22 күн бұрын

Here I am at 4:00am watching the whole thing 😂…watching RMR work with one hand.

@randallmacdonald4851 2 жыл бұрын

At 15:46, "Okay, to prevent any conflict of components...." THIS is why you excel at repairs. Toyota did not anticipate such an easy workaround.

@jgamer2228 2 жыл бұрын

Fucking engineers. If they had to work on what they designed they’d probably do a better job at it.

@Maxim.Teleguz 2 жыл бұрын

@@jgamer2228 we actually are encouraged to go to the shop and work on it. Problem is the due dates and the pressing projects that are waiting right after. I agree with you. So is probably why some engineers like to work at home on their cars instead of taking it to the shop.

@kitecattestecke2303 2 жыл бұрын

@@jgamer2228 on good Firma engineers are forced to work on their own stuff because the manufacturing has to build it later... Problem is that still lots of assholes exist and they just want to be done with their work so they design things badly like on most vw cars. If you company culture is stinky you won't excel at work is the take away

@boomerv7291 2 жыл бұрын

Watching you is so stress free & so informative at the same time. It always amazes me how you know where all the different bolts go. I usually take pix of every one before I remove it or I am screwed lol. The fact that you stay calm even when you have an issue is amazing. You rely on the pry bar where I would be reaching for a hammer lol. People like you are a treasure these days. Honest & Professional. It sucks when you are at the mercy of a dealership, but most of us don't really have any other choice. Stay safe & keep the videos coming. Thanx.

@nolanbrackin1260 2 жыл бұрын

He does technically have a video of where the bolts go. I always forget that while watching videos.

@stevenlavallee3833 2 жыл бұрын

Love the video, this fellow definitely got into the right field of work . And I myself really appreciate the honest car mechanics which seem to be few of these days cause everyone's after the quick buck. These guys sure earn there money ,cause it is a very hard line of work . I have to fix my car myself cause I can't afford to take it a shop. But I sure as he'll wish I could , I dread working on any vehicle. I sure hope they tip this guy, I'm sure he saved a ton of money for the customer. Thanks.

@helamanssons1491 8 күн бұрын

this guy's legit, and does great work. awesome

@A.C.71 2 жыл бұрын

Growing up with a father that was a professional mechanic, having friends that are professional mechanics I can tell you this guys attitude is like a breath of fresh air. I may have become a mechanic if I had been around such a cheerful attitude as his in the shop. Most shops will charge what the book time says even when many times it can be done much faster, this is done alooooot.

@dannylinc6247 2 жыл бұрын

Yes, a shop has a state guideline sign and a flat rate sign if they charge flat rate. Yes, they use the guidelines from a labor estimating guide. If they make a profit, that's how they pay labor, tooling, training equipment, taxes, disposal, environmental fees, storage, advertising, do special offers, pay administration and accounting, etc If a shop doesn't consistently make a profit, the many expenses get less attention and they start to lack what they need to stay a healthy company. Like being able to attract good talent suffers. They go into debt. They fail to advertise, train, or out fit people with the right equipment books, or computers and updates. When these suffer, their diagnoses may suffer, then it all affects quality. If you use the same estimating guide to figure out how much you think it should be, you can negotiate the price you pay with some service managers. Others know their costs and can't negotiate without hurting someone or some aspect they are responsible to. Still others, are using the guide from a bygone era and don't estimate wisely. Their rate goes up and their people get their time reduced to effect repairs. Who covers their time when it goes over the estimate? They would try to renegotiate once they were finding more on teardown. Hopefully they would let you know that during teardown it could be no worries, or they could find a need for more time and parts. That's why it's estimated with a flat rate but always hopefully, negotiable. And sometimes the have to lose or break even. If Ray has a body shop job, you can bet the payment for that car was already made. Body shops don't do the trick and hope for the banana. They get the banana before. Ray should get his book time if it's already paid. He's leaving them money on the table if he doesn't.

@A.C.71 2 жыл бұрын

@@dannylinc6247 sorry, sounds like a bs story to me.

@dannylinc6247 2 жыл бұрын

@@A.C.71 that's without merit to say that. You could find out by first asking a shop to estimate the part, and then ask for a sheet from a body shop. The body shop would tell you they need your insurance companys check before the work begins. If they find more, they write a supplement. They can trust all they like but the brass tacks are: the work begins when the checks in the drawer. The estimate is written from a crash book. It's not the book rays shop would estimate from unless it can't be found in the book they're using. Don't suggest it's a lie without evidence. Try it for yourself. Ask them how it's done where you do business with good reputable people. The other thing you could do is try doing work for people. Add up your cost. Add up your space. Add your tool outlay. Get the credentials. Find a supplier who won't charge you retail. Now, how much have you invested? What's your estimate? If you're wrong, you'll starve and go out of business in no time flat. Just the commercial real estate would break you. Then there's taxes. Who pays if it's not the consumer? Who could you get to work for you who is worth your trust if you're not paying the labor standard? Good news travels fast, they say.

@twothreefour234 2 жыл бұрын

it evens out, there are plenty of times you cant match the book.

@dannylinc6247 2 жыл бұрын

@@twothreefour234 true story, a smart estimator knows how to write a sheet so you can stay in business. A customer is free to get as many opinions as he wants. Taking into consideration, the circumstances can require the estimate to include the circumstances. If you then, sent that job out of that shop to Ray, With his circumstances he may have plenty of time to spare. His equipment makes him money. But cost them. His pro tools make him money. But cost him His dealer training and experience and mentoring makes him Good, but cost him. If the job gets dictated by another shop, prepaid, that's a win for him. If he gives the hours back, it's his own loss. They pocket it or put it in a fund for their needs. Rays being like Ken Miles, they took his win from him at Le mans.

@Charlie_Crown 2 жыл бұрын

Seven and a half hours book time, half hour to change out component, seven hours frantically trying to find patented Toyota jumping nut, cause there's no way I would have spotted that flying under that tool cabinet 🤔🤣👍

@roberthackenberg2874 2 жыл бұрын

Yes of course they are manufactured in Toyota's plant in Mexico. Next to the Mexican jumping beans factory.

@Charlie_Crown 2 жыл бұрын

@@roberthackenberg2874 😆

@ramiroescamilla7263 2 ай бұрын

This guy know so much about car’s is a joy to watch.

@scunnerdarkly4929 Жыл бұрын

Just another repair video for the casual viewer but this is absolute gold for showing on-the-fly reverse-engineering and problem-solving, achieving the same goal as following a manufacturer’s prescribed method but in a fraction of the time. And with a conscience too. No doubt it could take seven hours if you didn’t have years of experience and a keen eye or if you had to follow official procedure, but this shows what a skilled hand can do - while the other holds the camera.

@cheythompson740 2 жыл бұрын

Imagine how fast it would have been with two hands in full swing Haha, awesome work nice to see an honest mechanic

@komkwam 2 жыл бұрын

But that means his videos would not be longer than 5 minutes. 😁

@mark_a_vigil 2 жыл бұрын

The funny thing about this, was the fact that as an ex mechanic for the army I know that all the talking to things and talking through what your doing is just part of his daily process. Now he got to just add a camera and make some money from youtube for what he probably does normally. I know I used to talk like this all this time.

@billstuckey2268 2 жыл бұрын

Honesty pays.

@carpediemarts705 2 жыл бұрын

Money from KZfaq? He doesn't make beer money off of yt directly.

@moonpup6262 Ай бұрын

that pocket for the vertical bushing you can open up slightly using a hammer and a prybar, that way locating all of the bolts on the control arm never give you problems. and if you leave that bushing loose til you get the car on the alignment rack you usually find that you can bring the entire front end back into alignment simply by moving the rear of the control arm around. then tighten the bushing as the manufacture recommends. part of that 7 hours is for the alignment too

@unracker100 Жыл бұрын

You can tell a professional by how simple he makes repairs look and the speed he does it,you sir are a great mechanic, great repair sense, great trouble shooter great common sense, and your great at how you talk through the repair. Love your videos. Thanks

@martinvannostrand1 2 жыл бұрын

I really dig watching your vids man. You remind me so much of my mechanic buddy and the calm temperament he displays when he works on stuff. It just proves that some people are correctly programmed for this kind of work...people like you and him. And the fact that you are an honest guy to boot just echos that correct programming. Keep it up brother.

@mumsyt70 2 жыл бұрын

You are calm throughout n this is what's needed.

@alakani 2 жыл бұрын

Screaming loosens the rust

@onefastslimjim 2 жыл бұрын

@@alakani The more I grunt and scream, the more torque my arms have!

@Pippy1 2 жыл бұрын

Sounds like yinz dont live in the rust belt

@martinvannostrand1 2 жыл бұрын

@@Pippy1 Nope...I'm in the bible belt. We just string people up that are con us. :)

@marclytle644 2 жыл бұрын

Like Scotty told Gerodie on that one ST:TNG episode, always estimate more time than you actually need. That way it looks like you are a miracle worker. Everyone is surprised, and happy that you got it done faster than expected.

@gbeving3167 Жыл бұрын

Unless its honda powersport flat rate

@tonyincs 9 ай бұрын

Ok, Scotty. You must have seen Star Trek too. ;)

@sebbykaiser6466 3 ай бұрын

"Its like the first time you fall in love - you don't ever love a woman quite like that again. Well - to the Enterprise, and the Stargazer. Old girlfriends we'll never meet again"

@aaronthomas6155 20 күн бұрын

Unless it's Ford Warranty....then under-estimate by 50-75%....

@daviddelgado6090 Жыл бұрын

I so much miss working on my cars. Volvo 98, Focus 2003. Done engine mounts, control arms, transmission solenoids... Now with fibromyalgia can relieve the 'joy' through your vids. Tnx.

@robertpaul3675 9 ай бұрын

Bolts came out nice and easy im used to working on rust buckets i love when stuff comes right out.

@jimzivny1554 2 жыл бұрын

Glad the job went smooth. Every time you said how you'd beat the crap out of book time I was waiting for disaster. I've been there a million times

@beentheredonethat6885 2 жыл бұрын

And I've told you a million times, not to exaggerate!

@ralfus37 2 жыл бұрын

I am sure the book time was 0.7 hours, hate to deflate your ego.

@rgregoryful 2 жыл бұрын

For the first 20 minutes, I thought I had seen enough, Ray was no authentic mechanic, and then at the 20 minute mark, he uses a hammer, and then I knew, Ray was a real mechanic after all. Great job, making control arms fun again. Health and happiness to you and yours.

@Wajeth71 Жыл бұрын

🤣

@shrodingerschat2258 Жыл бұрын

It's not a hammer. It's a force multiplier.

@reecenewton3097 Жыл бұрын

@@shrodingerschat2258 And a dead blow force multiplier, at that. That ain't no carpenter's hammer.

@aaronthomas6155 20 күн бұрын

He could have avoided the need for the hammer by simply taking the stabilizer end links loose and pushing the stabilizer bar up. Would have also saved him a couple minutes.

@kerryalexander9071 2 ай бұрын

Love it!! Just every once in awhile I thought… ok that’s where the other 6 hours are going to be… ! Nice job

@dougrodriguez4977 29 күн бұрын

I changed the control arms on my girlfriend’s Toyota Sienna and it was very similar to what you’ve done here. Same struggles.

@charlescrampton5119 2 жыл бұрын

Love a competent mechanic! Having great tools are awesome,saving the mechanic time allowing him to pass on the savings to the repeat customer.

@eltay3 2 жыл бұрын

As an old flat-rate mechanic from the early’70s, I have been on both sides of the “seven hours” situation. The main time I would stick to book time was at the manufacture’s dealership. There, it sort of evened out. Nice work.

@briancraery6390 8 күн бұрын

Like a boss... Our Sienna needs both sides changed but we got quoted an arm and a leg. Too bad you're not in Northern CA...

@chromaticdragon 21 күн бұрын

"Don't need that little protective thing..." YEET! LOL

@thehowefrank7537 2 жыл бұрын

I've been a mechanic for over 25 years ....and yes without power tools and impact guns ....this may have taken 7 hours

@anthonyiannone7618 2 жыл бұрын

i bet you could have done that job with a pair of visegrips in less than 7 hours!!!

@harisyoung4110 2 жыл бұрын

Toyota and honda the repairing will always be easy and always have shortcut to do it.. same like my experienced with my 4 runner that they tried to charge me $1500 and expected of 6 hours doing an oilsump gasket and transmission filter, fluid replacement.. at last i do it myself in my garage in less than 30 minutes and less than $120 of parts cost.. Even if it's a continental car such as audi and bimmer also will never take that long to do a control arm replacement.

@GhostlyGhille 2 жыл бұрын

Its called Wrench time not impact time. Tools are an investment i would hit for 4 hours instead of 7 but tool bills are beast.

@jayemayyalldamnday 2 жыл бұрын

It woulda taken me 7 hours that's for sure, even if half the time was just looking for tools

@tonywomersley1256 2 жыл бұрын

I love the way your professionalism comes through. You actually explain why they may justify the time. Still loving your work. It makes me smile

@robertgross3061 24 күн бұрын

Good video and being honest about labor time was good to see. Only thing I will caution is starting bolts with a power tool can result in double threading, esp. those 22 mm head bolts going into welded frame nuts with tension from the new control arm bushings. Ya had some luck there. 👍✌

@donemmons5376 Жыл бұрын

Yet ANOTHER great job, Ray! SOO impressed with your honesty and integrity! SOO impressed with your legitimate demonstration of skill, ability, and concern. Wishing you nothing but great success in all you do….

@topherd1011 2 жыл бұрын

The only way this takes 7 hours is without an impact and doing it on the side of the road rolling around on the ground! I’ve been doing these in an hour since at least 2012. So of course I say righteous.

@harleyjones5200 2 жыл бұрын

*raises hand* ive actually done them on the side of the road with hand tools...done in under 2 hours.

@roaddog7542 2 жыл бұрын

Exactly the reason I never use shops that bill book hours. Alldata books should be burned. 🔥

@nimrodquimbus912 2 жыл бұрын

hours really dont matter. The hours are billed to the Insurance company, which in turn goes to the premiums that we all pay to drive our cars, anyways.

@WallyST675 2 жыл бұрын

@@nimrodquimbus912 Name checks out

@clbcl5 2 жыл бұрын

The 7 hour time is with much bigger vhs type video cameras to capture the action. Image the size of the mounting hardware for those cameras to get up close.

@ltviktor 2 жыл бұрын

When I saw the 'little metal shim deal' drop, in my head I worded 'oh damn I wish I had a camera running... oh wait'. Then you looked to check the other side and still assumed a wrong position, couldn't wait to see the reinstall on the new control arm. Hecking delivered, when time came to massage it back you had it already in the right orientation. Very nice job and somehow really enjoyed watching this.

@ExtremeRecluse 13 күн бұрын

I had my Lexus which has the same suspension. I had the control arms, inner and outer ties rods, struts, CV axles, sway bar links and bushings, calipers, pads , rotors and bearings in under 6 hours. I was charged $800 for labor.

@darinmason2987 Жыл бұрын

Nice to see a good straight up honest mechanic.. nice work..

@timothyharrison8953 2 жыл бұрын

I work aircraft and this is from the FAA FAR AC 43.13-1B 7-127. SECURING WITH COTTER PINS. a. Cotter pins are used to secure such items as bolts, screws, pins, and shafts. Their use is favored because they can be removed and installed quickly. The diameter of the cotter pins selected for any application should be the largest size that will fit consistent with the diameter of the cotter pin hole and/or the slots in the nut. Cotter pins should not be reused on aircraft. b. To prevent injury during and after pin installation, the end of the cotter pin can be rolled and tucked. NOTE: In using the method of cotter pin safetying, ensure the prong, bent over the bolt, is seated firmly against the bolt shank, and does not exceed bolt diameter. Also, when the prong is bent over the nut, ensure the bent prong is down and firmly flat against the nut and does not contact the surface of the washer.

@schwags1969 2 жыл бұрын

Wow, that was painful to read. I thought the aircraft industry would use lock wire instead of cotter pins??

@leadman4273 2 жыл бұрын

@@schwags1969 they do. Former aircraft mechanic.

@InsideOfMyOwnMind 2 жыл бұрын

And here I was just wondering if it was going to shred the axle boot if left too long.

@21Piloteer 2 жыл бұрын

Whew, good thing he's not working on an airplane. Cool story.

@flynlr 2 жыл бұрын

and that's how the one he removed was installed. also much easier to trim them before bending . just need a big set of dikes

@jpm_nt_i9308 2 жыл бұрын

Wow, now there's a blast from the past ... a deflecting beam torque wrench from Kmart!! Awesome display of professionalism in charging the actual labor time.

@chrish7336 2 жыл бұрын

Unfortunately he wouldn't get in trouble if he charged the full amount of time. The times in the books are based on Below Avg. mechanics and some complications. If the book calls for 7 hrs and it is known that is how they charge, he could get away with it legally even with the video showing otherwise. Back in the 80's this was a big thing, if the book called for 2 hours to do an oil change, the you were charged 2 hrs even if it took 30 minutes. Shops love this way of doing things as they can make more money from it. By the same time if something went wrong and it took 3 hours, you could still only be charged 2 hrs.

@terrypetty9822 2 жыл бұрын

The book time on labor likely included the alignment.

@chrish7336 2 жыл бұрын

@@terrypetty9822That would make more sense, however, still shouldn't be 7 hrs. Also that would be identified in the book pricing as well.

@paulhunter9613 2 жыл бұрын

JP I was surprised that he even used a torque wrench, I’ve watched the clowns at a repair shop run the lug nuts down damn tight, and then get out the torque wrench and just put a little pressure on it to make it look good if someone was watching. I’ve had that done to my vehicle, I loosened the lugs when I got home and had to use a 24” breaker bar with a cheater bar to loosen. I’ve had rotors warped before because of over tightening. When they use an impact and the air compressor kicked on it’s easy to overdue it

@Wishes890 2 жыл бұрын

Book times are intended as a "guide" only. And, it's called a time guide, but really it's a value guide. You multiply the number(in this case it was 7) by your shop rate. That gives the job a dollar value. If shop rate is $100.00 multiply that by the 7.0 and it gives a job value of $700.00. Need to stop using the term "time guide".

@furryp2402 Жыл бұрын

Great job. When you torque the suspension bolts you have to do the final tightening with the vehicle on the ground.

@Mr.mopar71 4 ай бұрын

Old school torque wrench. Nice!

@martyflannigan5052 2 жыл бұрын

there are shops that charge you what the book says no matter how fast they fix it in and the reason they give is the mechanic is just more experienced in that job so they are able to do it faster, doesn't matter what the book says

@schwags1969 2 жыл бұрын

Typically the stealership.

@ithinkdoyou 2 жыл бұрын

Does that mean that if book says x hours and it takes 2x or more than the book, they only charge book?

@jimk4267 2 жыл бұрын

@@ithinkdoyou usually. that's why you need to take the wins when you can

@jimk4267 2 жыл бұрын

that's the way it should be

@ricknielson8934 2 жыл бұрын

When an insurance company is involved you better get what you can, or they get you.

@A65Bill 2 жыл бұрын

Good to see someone who understands how stuff works rather than just reading the manual (RTFM)

@dondutch4107 2 жыл бұрын

sometimes understanding how things work is part reading the manual.. Love to see you diagnose a Open in a Can-BUS with "experience and knowledge" alone.. wont happen even for the best of Tech or even engineers Like asking a doctor to do surgery with Experience, but no tools..

@dc5723 Жыл бұрын

I did a LCA replacement on a 2005 Toyota Avalon. Both sides bushings were cracked with missing chunks. It took about 1-1/2 hours for each which included removing the engine mounts because the stupid bolt was right beneath the mount.