Radiomaster where is the John Hopke edition?? Bardwell, MCK ...how many video reviews would it take!
@CXBFPV2 жыл бұрын
Another excellent review. Thank you for all that you do for our hobby and educating us!
@RCVideoReviews2 жыл бұрын
Thank you. I appreciate the kind words.
@CXBFPV2 жыл бұрын
@@RCVideoReviews I have a mark one tx16s and love it. It would be really cool if the USB charging board that's on the new Mark II is available as an add-on component. I would purchase that in a heartbeat if possible..
@TontNZ2 жыл бұрын
I ordered my TX16s directly from Radiomaster on 30 March, 2022 I paid US$46 for expedited shipping. I received an email from them on 31 March to confirm shipping. However, despite the expedited shipping, the package was not picked up by DHL until 7 April, the exact same day that I receive an email from Radiomaster notifying me of the new TX16s MkII. So my TX16s is still 8-9 days delivery away and was made obsolete on the day it shipped. Nice one Radiomaster, it sucks.
@RCVideoReviews2 жыл бұрын
Ugh. I feel your pain on that one. If you can't find a way to get out of the MKI deal, it might ease your stress to know you'll probably have the good gimbals (although I don't know if they used the AG01 sensors prior to the MKII), and the pots/knobs/encoder can *probably* be swapped for the MKII parts. I know that's a raw deal, but maybe those little mods can take some of the sting out.
@TontNZ2 жыл бұрын
@@RCVideoReviews Cheers, great idea, I'll do that. Not sure at this point if I want to swallow the cost of a set of AG01 gimbals, may save that one for the future!
@chrissorlie52912 жыл бұрын
A very well planned, detailed review. Extremely well done.
@RCVideoReviews2 жыл бұрын
Thank you.
@crj06121995 Жыл бұрын
Such a great in depth review for someone relatively new to the hobby. Thank you!!! I just ordered a crux 3 with Crossfire along with this transmitter and the micro V2. Hoping I am satisfied with the range and penetration now.
@RCVideoReviews Жыл бұрын
Crossfire has a good track record. The software can be a little quirky and annoying sometimes, but the in-flight RF link has been proven.
@lokaero Жыл бұрын
Wow this is what called as an review.
@michaelshellim55342 жыл бұрын
Excellent roundup - thanks !
@RCVideoReviews2 жыл бұрын
You're welcome!
@kevbird17222 жыл бұрын
loving the opening sequence
@RCVideoReviews2 жыл бұрын
Thanks. I like it too :)
@SchuylerL2 жыл бұрын
Thank you for the overview and recommendation!
@RCVideoReviews2 жыл бұрын
You're very welcome.
@SchuylerL2 жыл бұрын
@@RCVideoReviews I’ve had an intermittent unresolved key stuck error on my tx16s. I think the upgraded mk II will solve it. Next, I’ll be watching your videos in migrating from open tx to edge tx!
@RCVideoReviews2 жыл бұрын
Intermittent issues are the hardest to track down. You might be able to hunt it down by unplugging individual key "board" connections like the 6p switch and leaving it off for a few days to see if it goes away. I've had that one, it's hard to track down.
@SchuylerL2 жыл бұрын
@@RCVideoReviews hey, you’re so awesome at helping I figure you deserve some follow up on the problem. The page up key is stuck. I went to the debug page in settings to see the 0/1 of the switches. You taught me this trick about a year ago. I tried out the replacement part I got back then. The same key is stuck on the replacement part! Page up stays at 1 when everything else changes from 0 to 1 when I press. How unlucky is that?
@Zbair992 жыл бұрын
Great to see this out there John! Nice review. Can't wait to pick one up!!
@RCVideoReviews2 жыл бұрын
Thank you Bill.
@RCREVIEWS101 Жыл бұрын
I was going to buy one, I like the screen, but a simple search on google and I found out too many complains about quality control, all kinds of problems and broken parts just after 6 months or less of use, guess my Taranis 9XD will continue in service
@beeradfpv2 жыл бұрын
Couple of things. For some of us racers, shortening the throttle (think the old red FRSky short throw gimbal) option is a big thing. Honestly the main reason i bought the AG01 gimbals. Second, how can i get those new slider switches AND do they work with my T16s. I use these on some wings for cameras on a pan/tilt system. Thanks!
@donmacquarrie5742 жыл бұрын
I may have missed it in your comments, but I believe the TX16S now ships with EdgeTX instead of OpenTX,which to me is a significant change. Love your videos.
@RCVideoReviews2 жыл бұрын
You are correct. I mentioned Edge a couple of times in the video.
@henryfpv4life9542 жыл бұрын
a very good review of the new radiomaster tx16s
@RCVideoReviews2 жыл бұрын
Thank you.
@Ard14002 жыл бұрын
Thanks for the great video. II learned a lot on my Saturday night! Nice weekend
@RCVideoReviews2 жыл бұрын
You're very welcome. Thanks for watching.
@reginaldmcnab32652 жыл бұрын
Nice review!
@RCVideoReviews2 жыл бұрын
Thanks!
@samavella88312 жыл бұрын
Thanks for the great review. FYI, I noticed that the link you provided to the RadioMaster website, they are showing that it comes with the foldable handle.
@RCVideoReviews2 жыл бұрын
I don't know where. I just looked at the standard edition and it's not showing a single image of foldable. Maybe you looked at the max edition??
@samavella88312 жыл бұрын
@@RCVideoReviews You’re absolutely correct, I was looking at the Max Edition. Sorry 😣
@humbertocortes682 жыл бұрын
Excellent and deep review of this new installment of Radiomaster. What I don't understand is why neither Radiomaster, nor Jumper, nor Iflight, etc. they are able to properly combine the ELRS protocol with a full multiprotocol 4 in 1 and the option to add CROSSFIRE without extra tricks or fixes, and configured in a versatile and practical edge tx...not an "almost ready" just add this, go to this web page. every time enjoying the advantages of the new protocols they become nightmares instead of hobby objects that anyone with basic knowledge could access without much complication???🙄😏
@RCVideoReviews2 жыл бұрын
Maybe you could send them a note: info@radiomasterrc.com
@witneydiggersrc32512 жыл бұрын
If only they gave you this before going to market, they may have taken on board your valuable recommendation. Thank you
@RCVideoReviews2 жыл бұрын
They have their process I guess. :)
@budiardiyanto24222 жыл бұрын
this is very cool, ...awesome and the way you review is very unique, and thank you for sharing your experience and knowledge, God bless you.
@RCVideoReviews2 жыл бұрын
My pleasure
@budiardiyanto24222 жыл бұрын
@@RCVideoReviews this is true, really helpful,...thank a lot
@enriquekramer45902 жыл бұрын
Excellent review!!!
@RCVideoReviews2 жыл бұрын
Thank you kindly!
@thomasallan8113 Жыл бұрын
When I bought your Kaos 60 I used your Radiomaster and I liked the feel of it. I currently use an NX 6 which is OK but U have just about convinced me to get a RadioMaster Tx. I am ok pilot who flys sport planes, some scale including warbirds, no interest in 3D or FPV. I understand that I can use my current Spektrum and Spektrum compatible receivers. Do I have to buy a battery for this receiver? I do not plan to do too much fancy stuff, obviously throttle cut, stabilization, dual rates, Expo, some mixing. I hope these functions are not too difficult to program. Thanks for all u do for this hobby. Wish I lived close to the flying field u now use.
@RCVideoReviews Жыл бұрын
Yes, you need to buy a battery. It comes with an 18650 tray which accepts 2x18650 cells, or they also sell a 5000MAH and 6000MAH that both work without modification. I have LOTS of videos to help you learn how to use this radio. How's the Kaos doing?
@thomasallan8113 Жыл бұрын
@@RCVideoReviews I ended up trading it for a couple of other planes which I regret I did get the Kaos 40 a year ago now discontinued. It is designed only for glow or gas motors and modifying it for electric was a chore and I had to start over. Tomorrow, weather permitting, I will maiden it. I fly it on a Cobra 3520 820 kv with 4S.
@YetAnotherRcChannel2 жыл бұрын
I'm going to get one, I think. Considering the Ag01 gimbals. And now I can get an updated radio including those sweet gimbals.
@RCVideoReviews2 жыл бұрын
RM definitely turned it up a notch with this one.
@YetAnotherRcChannel2 жыл бұрын
@@RCVideoReviews Sure looks like it. Think I'll wait and see what my LHS does. If they get a 4-1 with Ag01 I'm sold.
@mohdfadlyarifin2433 Жыл бұрын
Hi John! Million thanks for this video again 😎👍🏾. Today ive just done two flights( a full equipment maiden actually- TX16S mk2 v4 Edgetx,R88 wired as sbus,Zohd Kopilot Lite ,Bixler3), but im get upset.. 1- rssi not good, during takeoff only get around 67db. While flying around 90ft tx16s says 'rssi low' @ 52db.. the furthest ive tried is around 120ft and tx16 says 'rssi critical' and at 39db..almost lost signal. Have tried both D8 and D16 protocol on the Frsky modulation.also same.R88 rx dual antenna angled at 90deg or 180deg also same, rssi not strong and not full up to 100%. 2- 1st flight done. Manual & Balance mode is fine,if switched to RTH mode the Bixler just circling above me at 50ft+-, it wont self land to runway(as i set during power up the plane on the middle of the field).. i did adjust the Rth/Rad Pot clockwise till it stop.as illustrated in zohd manual. 3- second flight. Tried change rf protocol to Frsky,D16 8Ch.and tried both style angled antenna( 90° & 180°), still didnt get full rssi to 100 during sit on runway.just got under 77db.. Managed to fly around 100ft radius only,during last landing ive stalled the bixler and it just dive stall from 20ft height..no way to survive it😅..loll Conclusion: what is not right about it? Did i missed setup something on Tx16s that i just bought new? Kopilot unit- RTH function didnt land the plane, is it just thats all? The day before, i did try out other setups: elrs mode. Jumper Aion mini tx module & Jumper Aion mini 2.4 Rx(pwm).. only ch a.e.t.r did work, but ch5 for use the flight mode is not work..anyway i did not have access to see the Aion mini Rx pwm signal graph,as my laptop is not compatible to download the Expresslrs Configurator(mine is Windows8, popup blocked says didnt have 64-bit to run it)🤦🏻♂️ Or should i try my other ORX receivers tats laying around? Got a Orx R610Lite v2, a Orx NanoRx ppm rx, a JR R721 and a R921 rx sets.. Btw/: i will be need to have at least 7or8 useable channels to run also an fpv pantilt 2servo gimbal. Will someone please help me out...?😭 Ill be really appreciate your help.
@Dcscockpit2 жыл бұрын
Mine I bought two months ago also came with a folding handle in the box you could swap out.
@RCVideoReviews2 жыл бұрын
You didn't buy a MKII two months ago.
@arowe2312 ай бұрын
Awesome video. Well explained. I do not have a tx16s yet, but soon. I'm going with the transparent one. I seen on a video that a guy turned the handle around 180. So, if I understand correctly, I can install some sort of Bluetooth and the audio will go to my earbuds?? Thanks for all you do.
@RCVideoReviews2 ай бұрын
I haven't looked into BT mods, so not sure how that works. Glad my videos have helped you.
@RcKing-uz7qh2 жыл бұрын
Hey I need help please. My throttle is working on 90 percent it doesn't work on 99 % or 98 % it always work on 90 percent I calibrate it but still facing this issue I buy new radio and I'm a beginner plz help me
@bobwatson65586 ай бұрын
Great video and your are the master of this radio. I know you have a video of you flying a 700 size heli so this radio can do that for sure. Is there a way we could talk by phone so I could learn how to program this radio for a heli. I have the edge TX set up on the radio and I'm using the touch screen. Your help would be greatly appreciated. I currently use spectrum and they already have the mixing already setup.
@RCVideoReviews6 ай бұрын
You really should join our discord. That's the place to be for help. Link is in every video I post.
@bobwatson65585 ай бұрын
I think we could save a lot of time if we could do a phone call. Thank you for all the help you gave me. I just want to understand so there are on big mistakes.
@CarbonGlassMan2 жыл бұрын
The only problem I have with my TX16S is that it does not have reverse polarity protection but I'm going to add that circuit. The pots on it suck. Very cheap and wobbly, but I don't use the pots or sliders so no big deal for me. I wish they would paint the buttons so I can see what the buttons are.
@juliusj44612 жыл бұрын
In this version pots and wobbles are good!
@paolo95352 жыл бұрын
great video 👍👍👍
@RCVideoReviews2 жыл бұрын
Thank you! Cheers!
@vmaksym6 ай бұрын
Thank you for review, I have TX16s I want upgrade internal TX to ELRS Module from TX16S MKII ELRS Module. Do you know are they compatible?
@rogerkircher2 жыл бұрын
How about a snippet video for the low volume issue.
@brandonwesson68186 ай бұрын
Do you recommend the 4in1 for a beginner getting into RC planes and maybe adding elrs module in future
@RCVideoReviews6 ай бұрын
The 4in1 is a great bridge device. It will let you bind with just about anything. So coming from another system, yes, I would use 4in1. If you're just starting out, I'd say get ELRS and stick with it.
@brandonwesson68186 ай бұрын
@RCVideoReviews thanks..I only have 2 planes as of now. Neither are ELRS got them binded and rates set up nicely watching your videos and just got it today. Will probably just go ELRS from here on out. Thanks a ton for the videos. Best ones I could find!
@2whl4re Жыл бұрын
What are the 'sideways Y' lights (buttons?) numbered 1-6 on the top center, beneath the S1/S2 knobs? Are these an indicator for something, or a function switch of some kind?
@RCVideoReviews Жыл бұрын
It's a 6 position switch.
@ianbarnes6266 Жыл бұрын
what are the buttons 1 to 6 under the pots used for ? thankyou Ian
@FB-gm6el Жыл бұрын
can someone please tell me what kind of range i can expect with the elrs version???
@flipfpv4539 Жыл бұрын
Hi John another very comprehensive review thank you I've got the MK1 just wondering if I put the SD card {Edge TX 2.8 }from my MK1 into the MK2 radio and upgrade the firmware will my radio setting etc be transferred cheers Phil
@RCVideoReviews Жыл бұрын
Yes. You could probably use a spare sd card to flash the new radio first. You’ll also need to calibrate your sticks even if the radio doesn’t ask you to.
@Freebird_672 жыл бұрын
Oddly my M1 came with the upgraded gimbals installed.
@RCVideoReviews2 жыл бұрын
Somewhere between the MKI and MKII launches they did a refresh. I'm not sure what sensor those pre-MKII gimbals use though. As far as I know, the MKII is the first radio to get the AG01 sensor.
@Pustul2 ай бұрын
How does the v4 gimbals compare to the mark I? Would you advise to go for the AG01 or are the plastic ones good enough in the mark II?
@RCVideoReviews2 ай бұрын
v4's in MKII are really good. AG01's were tuned by experts. I use AG01's.
@janiversen4391 Жыл бұрын
Great review, but how is the range of the 4 in 1 with frsky receiveres or a dmsx ?
@RCVideoReviews Жыл бұрын
I've been flying the 4-in-1 for a few years with my best airplanes and helis. I've never had an issue with range. I haven't done specific testing other than having logged hundreds of flights and recording 0 radio link issues.
@aeropic31 Жыл бұрын
Hi, congratulations for your very good analysis of the differences between both versions, this is indeed a deep dive... I get one question/concern about the markII audio jack. When I plug an earphone, I get a perfect sound in the earphones but there is a remaining half volume sound from the internal loudspeaker... I opened my radio and could check there are 2 loudspeakers one under the Rx module, the other one at the back of the radio close to the jack. On my radio, it seems the upper loudspeaker is not switched off when plugging in the earphones. Am I the only one ?
@RCVideoReviews Жыл бұрын
Thanks for the comment on the review. I'm not sure about the audio jack as I've never used it. Maybe someone else can chime in. If not, you can always check with Radiomaster.
@Dcscockpit2 жыл бұрын
See…I have these gimbals on my tx16s I bought 2 months ago, they advertised the external adjustments like their a new thing and mine have them.
@RCVideoReviews2 жыл бұрын
The key message is these are v4 gimbals with the AG01 sensors. No prior version of the radio had this sensor. And since you appear to enjoy knit picking, it's they're not their, in the context with which you used the contraction. PS LOTS of People have an original run MK1 TX16s. For those people, the gimbal adjustments will be new. I have two other TX16s radios without that adjustment. I understand your view is to a single radio. My view is to address TENS OF THOUSANDS of possible scenarios.
@efficientequilibrium29822 жыл бұрын
Great Review. I have a couple of questions would appreciate your response. Unfortunately I bought the older version early March, it was badly misassembled so had to return and finally I received a working one in the beginning of April. Now I am feeling bad since I literally purchased a brand new radio which is already outdated. Companies should be a bit more discrete on the upcoming versions. 1. Mine came with the same gimbals as these v4's (looks the same and the circuit board has mag v2.3 on it). I guess they updated it early on, they seem sensitive and center very well. 2. The S1/2 rotating buttons are somewhat stiff on mine, has much less play than your mark 1( maybe they also upgraded it in between mark 1 to ii I see that eachine version already had those). The mid indent is strong but I would say the overall feel is still worse than even an entry level radio like flyskyi6. 3. The low resolution ls/rs sucks but then with such a short travel and location of these sliders I wonder if this is a big deal. I think the additional resolution is just a result of potentiometer range. 4. The roller is running perfect on mine similar to your mk2, no matter how fast I roll, it never skips or moves in the wrong direction. But it is the old one so I don't know about longevity. 5. Do you think the improvement in the board is a must have? I am seeing some voltage oscillation while charging the 5000mah Radiomaster pack and it sags a bit. Maybe that is because of 21700 cells. Should I simply sell it, eat the loss and preorder a mark 2? Once again thank you for the detailed review.
@RCVideoReviews2 жыл бұрын
To directly answer your question: No. Now let's chat: Left/Right sliders--they can easily be swapped out when replacements hit the market, but this is only worth the effort if you have a requirement for additional resolution. i.e. I use mine for flaps and gear. For flaps, I need three points of resolution. For gear, two. That use case wouldn't justify a change. If I were still flying FPV planes with pan and tilt assigned to sliders, that would be a different story as pan and tilt would benefit from full resolution. Rotary wheel: If you have no beef...then this is immaterial. Charging: It's nice that it charges at a stable charge rate, but PRACTICALLY speaking, this will never really matter to me as I usually plug my radios in the night before I go fly and they last all day long. I've never sat and watched the radio and said, "finally, it's ready to go". S1/S2: If you have enough motivation to change them based on how they feel, wait for the spares. It's so easy to change components inside this radio, pots are no exception. Bottom line, nothing you said warrants a change from an objective point of view. That said, I always *just want* the lates stuff. So if my budget allows, I upgrade. That's no objective though, that's a subjective decision.
@warrensweatt1512 жыл бұрын
Please suggest to Radio Master to move the momentary switch to the other side of the radio.
@RCVideoReviews2 жыл бұрын
I have.
@danielson1012 жыл бұрын
is it reverse polarity protected?
@Starkman32 жыл бұрын
I have the TX16S MK2 on order, and really want to fix the low volume issue as soon as it arrives. I haven't done any file updating on a device like this. Could you do a quick how to on replacing those sound files, or if it already exists, where it is? Your videos have been extremely helpful as I get ready to dive into this new high end transmitter world.
@RCVideoReviews2 жыл бұрын
Go here: github.com/EdgeTX/edgetx-sdcard-sounds/releases/tag/v2.5.3 Download your language file (en for english). Open the ZIP Connect your radio to PC Delete from Radio SD card: /SOUNDS/en Copy from the zip SOUNDS/en to /SOUNDS/ on SD card Done. This is basic file management and not really something I would make into a standalone video.
@Starkman32 жыл бұрын
@@RCVideoReviews Got it! Thanks.
@garymurphy51332 жыл бұрын
Hope you are still following this. I have just bought a new TX16S mk2 and find the volume low. it came with latest edgetx 7.2.1 as of aug 2022. Do i need the sound file you mention?
@RCVideoReviews2 жыл бұрын
Yes. Get the sound pack from the EdgeTX Github and replace the audio files on that radio.
@ericlajoie80282 жыл бұрын
Can you save multiple recievers on this radio? As in bind once and save to the radio, and switch between recievers (drones).
@RCVideoReviews2 жыл бұрын
If you don't use RX numbers, once you've bound an RX it will activate anytime you use a model with that protocol.
@vrf2012 жыл бұрын
Will they provide a upgrade kit for the mark 1?
@RCVideoReviews2 жыл бұрын
Unknown at this point.
@simplefact4u8 ай бұрын
Is it possible to have 4in1 and ELRS into one TX ?
@RCVideoReviews8 ай бұрын
Sure. If you have an internal 4in1, get an ELRS Ranger. If you have an internal ELRS module, get a Radiomaster external 4in1.
@LEGOBubuS6 ай бұрын
😊🎉❤
@Arthur_C2 жыл бұрын
HI, Nice video! Thanxfor putting all the effort in! Do you know if parts of the MK1 are interchangeble with the MKII? Particularly all the metal-bling alu-cnc parts I already have for the MK1 and the leather grips? Appreciate you view on this.
@RCVideoReviews2 жыл бұрын
Most of them are. There are some differences in the backplate (audio jack and battery cover). The leather grips fit fine. The backgrips are not interchangeable. I've swapped the scroll wheel and nav buttons from a MKI to a MKII without issue. The AG01's are interchangeable, so I believe all gimbal related parts will probably be interchangeable.
@Arthur_C2 жыл бұрын
@@RCVideoReviews thanx for the swift response! Looking foreward to the delivery of the new machine this weekend!
@MouwDown2 жыл бұрын
I literally just purchased my tx16s. So I definitely won't be upgrading my entire radio. I am interested in the s1 and s2 pits upgrade board. I don't like how wobbly they are. Question, does the charging port on the bottom of the v1 radio balance the cells powering the radio? I have the goldish cnc version with the brown straps on the sides if that matters.
@RCVideoReviews2 жыл бұрын
Yes, the radio balances the 2s battery. That would be a big foul up if it didn't. Edit: I have to re-state. I ASSUME the radio balances the battery, I've never actually checked. However, it would be enough of a colossal miss that the Internet would have broken were it discovered the radio didn't balance the battery--so I never felt the urge to validate.
@MeshJedi2 жыл бұрын
Can you check what new TX16s MkII parts can be used on the original TX16s ? the pots and such seems obvius that they'll work. But could you find out if it would be opossible(With new AG01 gimbals) to use the new flat front plates on the original TX16s?
@RCVideoReviews2 жыл бұрын
I'm not sure I follow your question. "With new AG01 gimbals....to use the new flat front plates with the MK1". The new gimbals fit in the MK1. I took my AG01's out of a MK1 and put them in the MKII. I took the gimbals from the MKII and put them in the MK1. The beauty plates are not interchangeable between AG01's and the v4 gimbals.
@MeshJedi2 жыл бұрын
@@RCVideoReviews Mostly, is it possible, "IF" and when they sell it individually, to mount the new flat CNC alu front on an old TX16S. granted none of the controllers you have got the alu frotn plate(so far, I think you have to buy the getfpv og MCK version to get the CNC front). whihc is probably one of the reasons it's a lot more expensive, along with AG01.
@RCVideoReviews2 жыл бұрын
Thanks for the clarification. I expect they'll work together but not sure. You can send an email to info@radiomasterrc.com and they will be able to answer this one. Or you can ask them directly on my discord.
@Sugar_K2 жыл бұрын
lols had a ts16 max mk2 for months.. didn't know it was a mk2 🤣
@ezalku2 жыл бұрын
hi ,v1 have extra port for additional 2 switches ,i see that you mentioned 2 extra ,total of 4 ,my questions is it Tx20s now!?
@RCVideoReviews2 жыл бұрын
The MKII ports I referenced are added serial ports. Still TX16s.
@shaneintegra2 жыл бұрын
What is RadioMaster's warranty like?
@RCVideoReviews2 жыл бұрын
They stand behind their products, they have US based service centers, they have a full pipeline of replacement parts. I've personally seen many many occasions where RM stepped-up and helped even when I don't believe the issue was theirs.
@megatech19662 жыл бұрын
What is ELRS and 4in1 options?
@RCVideoReviews2 жыл бұрын
ELRS is Express LRS. It's a Lora based RF protocol on 2.4ghz. 4-in-1 lets you bind the TX16s to just about any mainstream protocol including FrSky and DSM + a host of proprietary quad protocols.
@golemsnatch57552 жыл бұрын
Hi John, I know you have both the original T16s and the Eachine version. How does the Mk2 compare to the Eachine version, the Eachine T16s I have, has most of the improvements such as the sticks, pots, sliders etc. so I'm just curioua.
@RCVideoReviews2 жыл бұрын
Pots on the Eachine feel the same as on MKII. Siders are totally different. Sliders on Eachine feel like MKI, on MKII they have legit detent. Mechanically the gimbals look the same. Not sure if the Eachine sensor is the same as AG01.
@golemsnatch57552 жыл бұрын
@@RCVideoReviews Cheers John. I'm quite happy with both of them although if you get the chance a short video of how to swap the Eachine from mode 2 to mode 1 would be appreciated. I fly mode 2 for helis and mode 1 for planes and will need to swap the Eachine shortly for my fixed wing stuff for when the weather picks up. I suspect it's not difficult but a walk through would be a great help.
@TheJoker67892 жыл бұрын
I don't have the adjustment screws on my gimbals.🙃☹😭
@RCVideoReviews2 жыл бұрын
AG01's
@hectorparra7222 жыл бұрын
Did they improve the throttle ratchet feeling?
@RCVideoReviews2 жыл бұрын
It's the same throttle ratchet as on previous versions.
@DontShootUK2 жыл бұрын
I bought the tx16 a few mths back and I have got those gimbals, at least they are adjustable. Wonder if they are the same as the ones on the eachine?
@RCVideoReviews2 жыл бұрын
I'm not sure if the Eachine uses the same sensor as the AG01. Mechanically they look the same.
@ulbuilder2 жыл бұрын
Same here, bought mine about a month ago and it has the front gimbal adjustment.
@Freebird_672 жыл бұрын
Thry are same gimbals. I purchased my T-16s a month ago from Helidirect and it has same exact gimbals. My buddy purchased his same radio a few months prior to mine and his has the older gimbals without the adjustment holes. Looks like some of the last M1 radios shipped with the new gimbals luckily.
@DontShootUK2 жыл бұрын
@@Freebird_67 I wonder if they have the new sensor like on the mk2 or if it’s just the adjustments we have? 🤷♂️
@DontShootUK2 жыл бұрын
@@Freebird_67 good to know! I don’t feel so annoyed with myself for buying the mk1 two mths before the mk2 came out! 🤦🏻♂️😂
@Dcscockpit2 жыл бұрын
Rear speaker also not new. If you were gonna compare this new radio to one of their most recent radios it would be good to have them both so your not pointing out things as “new “ when they are not
@RCVideoReviews2 жыл бұрын
Never said the speaker was new. I said the audio jack on the back was new.
@ramongarciano5692 жыл бұрын
it aint touch screen ?
@RCVideoReviews2 жыл бұрын
It has touch.
@Twx972 жыл бұрын
I can’t imagine that this radio is cheaper than my 18sz
@RCVideoReviews2 жыл бұрын
By about $800 based on a cursory google search.
@Twx972 жыл бұрын
@@RCVideoReviews man that break my heart.
@ottokueng42362 жыл бұрын
Is this tutorial thought for fast speaking people only? Luckily we can reduce the playback speed in KZfaq.
@RCVideoReviews2 жыл бұрын
It's intended for everybody. The video is produced in conversational English. There is nothing particularly fast or slow about it.
@henryfpv4life9542 жыл бұрын
yes yes what is new????????????
@RCVideoReviews2 жыл бұрын
All the new goodies are covered in the video.
@thelimike2 жыл бұрын
What’s new ?
@TontNZ2 жыл бұрын
Check out the Radiomaster website to find out all the new variants and features.