Rear chase light installation on 5th Gen 4Runner - Baja Designs S2 Sport and Switch Pros 9100

No video

Rear chase light installation on 5th Gen 4Runner - Baja Designs S2 Sport and Switch Pros 9100

Рет қаралды 5,862

Жыл бұрын

In this video, I show how I installed a set of Baja Designs S2 Sports on my 2020 4Runner TRD Pro in a rear-facing configuration to be used primarily as chase lights. I discuss my specific set up with my Southern Style OffRoad after market roof rack and my Switch Pros 9100.
Begin Disclaimer
This video is for demonstration purposes only. It is me demonstrating how I performed this modification. I make no warranties, nor do I take any responsibility for damage to your vehicle. Always seek advise or assistance from a trained professional.
End Disclaimer
Parts used:
Baja Designs S2 Sport Pair Work Scene LED Amber: www.amazon.com/dp/B07MRHJ2BG?...
Switch Pros SP-9100 8-Switch Panel Power System With Concealed Mounting Hardware: www.amazon.com/gp/product/B07...

Пікірлер: 21

@ej2054 3 ай бұрын

22 year ownership...awesome!

@MrTheodoreBear 24 күн бұрын

This is the video i have be looking for so long! Would you be able to show a wiring tutorial for the chase lights? Thanks for the great video and insight

@pn312 Жыл бұрын

Good setup. The overlanding group that I have gone on trips with require amber chase lights like the ones that you installed for dusty or snowy environments. When you have a line of 10 or 20 vehicles kicking up dust, the trailing vehicles can really have a hard time seeing the vehicles in front of them. Amber lights really cut through the dust better than any other color. I also have the Baja Designs S2s. At around $230 a pair, they are kinda pricey. I more recently bought some S2 clones to use as ditch lights from Amazon. I can't speak to their longevity, but they seem to be pretty good quality and comparable in brightness for around $33 a pair.

@steviehernandez158 Жыл бұрын

Enjoying your videos and being educated on awesome 5th Gen 4runner mods! 😀

@AZOverland2017 Жыл бұрын

Nice clean install

@nate61989 11 ай бұрын

Did not know switch pros had an app, now I’m excited lol!

@LiquidXiron Жыл бұрын

Loved this, thanks

@Socaloverlander 10 ай бұрын

Subscribed !

@_madpanda 3 ай бұрын

Wish I could do this on my Prinsu. Tried the same way at first but it hits my hatch, so I ended up mouting it to the sides 😭

@arzeeaj 6 ай бұрын

Awesome video!! How much wire did you use?

@theoverlanded 6 ай бұрын

I don’t remember exactly how much I used. The wire is pretty cheap so I’d recommend getting more than you need to minimize any additional splicing.

@lconnort 11 ай бұрын

I'm curious about what black plastic material that you used in-between the rails to hide your wires. What material did you use? Where did you get it? I like your setup and like to hide wires as much as possible.

@theoverlanded 11 ай бұрын

It was just some scrap plastic that I cut down to size to slip into the channel.

@crimsoncastillo1356 8 ай бұрын

How did you join the passenger side wiring to main harness on the driver side? Just splice them in? Clean install and that Switch Pro man...

@theoverlanded 8 ай бұрын

I spliced them together and covered the connection with heat shrink tubing. I staggered the individual wire splices a bit to keep the harness as non-bulky as possible. Thanks for the compliments!

@coldie5445 Жыл бұрын

How did you set up the dimming? Also my strobe function on my switch pro is slightly different that yours. My strobe is super fast then stops for a second then gets super fast again. I mounted my switch pro in the exact same spot as yours. Good choice!

@theoverlanded Жыл бұрын

The strobe and dimming is configured for each device using the Switch-Pros app.

@coldie5445 Жыл бұрын

Can you change the speed of the strobe on the app? I only see 1 touch strobe/ strobe or flash

@theoverlanded Жыл бұрын

Not 100% sure, but I don’t think so.

@johnesgy8382 Жыл бұрын

Awesome install! Is there a difference using 14g vs 16g wire?

@theoverlanded Жыл бұрын

I would recommend doing some research to determine the appropriate wire gauge based on the amperage of your lights and length of wire needed. There are plenty of sites on the web that provide wire gauge calculators.