In this episode of CTPTV you will learn how to replace the rear crankshaft seal on a 3306 Engine. En este episodio de CTPTV aprenderá cómo reemplazar el sello trasero del cigüeñal en un motor 3306.
Пікірлер: 52
@shaney555553 жыл бұрын
Use retaining compound and then oil the mating surface? Doesn't make sense
@achmada93386 жыл бұрын
Thanks costex , these information on how to properly taking care of diesel engine mighty useful. Thank you guys very much.
@CostexTractorParts6 жыл бұрын
Thank you for the comment!! Glad we could help :)
@markthompson2423 жыл бұрын
Why would you put a retaining compound on the crank surface then oil on the wear sleeve surface where it contacts the crank
@traviswiens40612 жыл бұрын
No kidding?!?
@michaelmanning974 жыл бұрын
Love these tech videos.so not like real life in shop.looks so easy.lol
@michaell.corfey91543 жыл бұрын
What’s the easiest way to take the seal out of the machine, is it better to remove the whole engine or drop trans? Can I get some info please
@chichovolcan5 жыл бұрын
Do you guys sale the installation tool?
@Ccoolmike179 жыл бұрын
Thank's very helpful
@CostexTractorParts6 жыл бұрын
Thank you for your comment!
@toheebkunle94404 жыл бұрын
Can I double the rear oil seal
@hgvtools7304 жыл бұрын
Thanks for share the video :))
@DrivelineMaster9 ай бұрын
You cleaned all the oil off the crank and then applied the retaining compound which looked like a green sleeve retaining lock tight but then you did something that was counter productive. You applied oil to the inner part of the sleeve before installing. if your going to oil it then why clean the oil from the crank and why install the retaining compound? The retaining compound won't work if there is oil between the sleeve and the crank.
@bahras19832 жыл бұрын
Where can I find the front and rear Installer?
@AbdulKurad5 жыл бұрын
Good sir thanks
@joecorrie19 жыл бұрын
dam just bought that installation tool from cat 300 bucks, great video thanks.
@CostexTractorParts9 жыл бұрын
Thank you for watching our video. We are glad you enjoyed it. Feel free to give us any suggestions for more videos that you would like to see. We are always looking for feedback from our viewers.
@cyberblock76193 жыл бұрын
How much it cost for parts and labor?
@Abdullahshekh19786 жыл бұрын
Thanks
@user-wp8of2ke3n4 ай бұрын
Please what is the name of the installation to 500 KV the size of number please
@user-wp8of2ke3n4 ай бұрын
I need it too size or the number
@caterpillarman4567 жыл бұрын
The flywheel has one offset bolt hole because there isa 3/8 nc bolt hole on the front face of it for locating #1 or #6 TDC. This has nothing to do with balancing anything..The flywheel can only be installed in one position on the crankshaft flange.
@Golo19496 жыл бұрын
Mine has a dowel pin.
@chris62002 жыл бұрын
Some flywheels have weights to help balance the engine. I'm not sure if caterpillar is doing it but I know GM has been doing it for about 40 years.
@patrickmusembi54386 жыл бұрын
Have chenged sump gasket and a bell housing gasket and a rear seal for a 500kva scania engine and my funny story is the engine cracks but doesn't run. Gone ahead and changed flywheel sensor ,nothing is going on. Help me.
@CostexTractorParts6 жыл бұрын
Hello and thank you for contacting us. For any questions or inquiries, please email us directly at marketing@costex.com so that one of our representatives can better assist you. Thank you!
@kalimansari39235 жыл бұрын
Nice
@pippiniello8095 жыл бұрын
Azz.....stringe i bulloni sull' albero motore con una pistola pneumatica? BRAVO'
@nitroustommy36684 жыл бұрын
Anyone know if the seal installation tool for a c13 is the same as a C15?
@diegomurillo21942 жыл бұрын
He did say 3406. So I’m guessing any variant.
@albertjones6176 Жыл бұрын
@@diegomurillo2194 *3306*
@Bradley_Bern7 жыл бұрын
does the transmission always have to be removed no matter what make or model? I am replacing the rear main seal on a Isuzu NPR DIESEL
@cmcmillan227 жыл бұрын
Yes, for the NPR engine you need to remove the transmission. www.ebay.com/itm/Oil-Seal-Crankshaft-Rear-For-ISUZU-NPR-NQR-4BD2-3-9L/152127914551?epid=1873603663&fits=Make%3AIsuzu&hash=item236b87c237%3Ag%3AZAoAAOSwMNxXXvFe
@CostexTractorParts6 жыл бұрын
Hello! Always, there is no way to get to the seal if the transmission or engine is not removed.
@dannyyo79485 жыл бұрын
no need to remove the transmission, instead you remove the engine.
@Underpressure114 жыл бұрын
@@dannyyo7948 lol
@franciscohackett86963 жыл бұрын
Hi is it possible you can sell me one of those tools
@djlost1210 жыл бұрын
Do u drain the oil before taking the seal out?
@CostexTractorParts10 жыл бұрын
Hello, thank you for watching our video. No, you do not have to drain the oil before taking the seal out. The oil level should be below the seal. If you have any further questions, please do not hesitate to contact us.
@michael66929 жыл бұрын
YES ALL WAYS DRAIN THE OIL WITH NEW OIL & REPLACE THE OIL FILTER AS WELL
@CostexTractorParts9 жыл бұрын
Although it is not necessary to drain the oil for this procedure, we at Costex agree with Michael Fawcett’s answer, since it is always a good idea when servicing an engine, to do a complete oil and filter change. Click here for a listing of oil filters Costex has available for your engine www.costex.com/Library/inserts/F-720-031.pdf .
@rockpython907 жыл бұрын
u need to pull out the gearbox + the clutch for change this seal... so made it when servicing ? :/
@amzadnabi29046 жыл бұрын
Can you apply Grease instead of oil on the seal before installing
@joecorrie19 жыл бұрын
nice video short and to the point
@CostexTractorParts9 жыл бұрын
Thank you for watching our video. Feel free to give us any suggestions for more videos that you would like to see. We are always looking for feedback from our viewers.