No video
Rebuild a Willys jeep transfer case part 1 (disassembly) Kaiser Willys
Рет қаралды 2,225
Күн бұрынThis video is sponsored by Kaiser Willys Auto Supply
Use code REDEYEGARAGE10 to save 10% of your entire order from www.kaiserwill... they have tons of Willys and AMC parts!
If your jeep transfer case needs rebuilt or resealed, or you just want to see how things work you’re in the right place. This is part 1 in a 2 part series. Part 2 will show the reassembly procedures. Let’s dig in! The spicer 18 variant was used in all Willy 4x4’s from 1941-1972(early) before being replaced by the Dana 20. The spicer 18 transfer case is a cast iron 2-speed gear drive unit. The most common low range ratio is 2.46:1 (civilian) it has a offset rear output with passenger side drop. It is extremely robust/small/light…it can handle lots of power and it’s very easy to work on! Please feel free to ask questions! Thank you for watching!
Get parts for your transfer case here!
www.kaiserwill...
#willysjeep
@Archvil1 6 ай бұрын
Amazing work right there
@olivedrabgarage6243 6 ай бұрын
Brilliant video mate, some things there I learnt that others haven't explained in their really quick and basic videos. I'm looking forward to your assembly video as I've had my gearbox and transfer case sitting for 18 months waiting for reassembly but I'm not technically minded enough to read through and understand the technical manual...basically I'm a bloke with zero experience doing this sort of mechanical work. So as soon as you post up your video I'll be able to have a crack at getting my boxes done.
@redeyecafegarage7484 6 ай бұрын
Awesome! I’m glad you enjoyed it! Thanks for the feedback! The assembly video will be up really soon. I’m working on it now. Building the spicer-18 is one of my favorites! Thanks for watching!
@olivedrabgarage6243 6 ай бұрын
@redeyecafegarage7484 hopefully you'll have it up by the weekend? That's be great if you did. I saw you did a disassembly video for the L134 block, am I right to assume you'll be doing reassembly as well as that's another one on the cards for me in a month or so. Saving up for the machining of my GPW block so as soon as I have that done I want to get it reassembled but I have so many questions in regards to using old parts like valves, valves guides, rods, tappets etc.
@187manowar 6 ай бұрын
Nice video Seth. The more I watch the more I want an old Willys but without all the effort. 😀
@redeyecafegarage7484 6 ай бұрын
Thanks! Yeah it seems you are about due to joint the Willys crew!
@joefw2446 6 ай бұрын
Excellent instruction. Thanks so much. I rebuilt a 45 GPW tcase about 15 years ago and as you said its mostly gaskets/seals, but also replaced intermediate shaft and bearings. At the time was warned to avoid the very cheap ($10) import intermediate shafts as they would disintegrate in no time. I also opted to leave out the interlock pill. Thanks again!
@Hinesfarm-Indiana 6 ай бұрын
Really interesting, good video. Do you ever work on diesel motors?
@redeyecafegarage7484 6 ай бұрын
Yes, almost everything I own is diesel including my other flat fender 👍
@Hinesfarm-Indiana 6 ай бұрын
@@redeyecafegarage7484 ok that’s really neat 👍
@redeyecafegarage7484 6 ай бұрын
@@Hinesfarm-Indianasure! Did you have any specific questions. I’m no diesel pro but I know enough to be dangerous! The gmc was my latest diesel swap. 👍
@Hinesfarm-Indiana 6 ай бұрын
@@redeyecafegarage7484 yeah I was just wondering if you got into working on them much, I overhauled our one John Deere tractor this winter, it was neat to work on.
@monette44 6 ай бұрын
Precision Transmission
Рет қаралды 46 М.
Ron Fitzpatrick Jeep Parts
Рет қаралды 14 М.