Refitting ABS Control Module on a 2001 Mini One Cooper R50 R52 with Tritec Engine 🚗 after soldering

Рет қаралды 8,040

Күн бұрын

In this video I reinstall the ABS control module after soldering the connections inside the control module, back onto my 2001 Mini One Cooper R50 R52 with the Tritec Engine.
⬇️💥⬇️ Links Below & Donations ⬇️💥⬇️ I also do a bit of math on using extensions on a torque wrench.
⚡Useful Tools Some Used In This Video
1️⃣ Laser Low Rise Car Ramps 🕔 00:06 🚧 amzn.to/3fH5IDI 🚧
2️⃣ Beta XXL Work Overalls (XL out of stock) 🕔 00:57 🚧 amzn.to/2Sja2ld 🚧
3️⃣ Facom Torx Screwdrivers 🕔 01:28 🚧 amzn.to/2TiozgY 🚧
4️⃣ Norbar 20 Nm Torque Wrench (ideal for cycles) 🕔 01:58 🚧 amzn.to/3iwufyn 🚧
5️⃣ Wolfcraft Ratchet Clamp 🕔 06:24 🚧 amzn.to/35biW7a 🚧
5️⃣ 3M Ear Defenders 🕔 06:24 🚧 amzn.to/3guCc4u 🚧
6️⃣ Sealey Ratcheting Flare Nut Spanner 🕔 06:24 🚧 amzn.to/3p0QRIt 🚧
6️⃣ Sealey brake spanner 10 & 11mm 🕔 06:24 🚧 amzn.to/35aJxRz 🚧
6️⃣ Dot 4 Brake Fluid 🕔 07:43 🚧 amzn.to/3zmtEVW 🚧
7️⃣ Norbar 10 to 50 Nm Torque wrench 🕔 12:39 🚧 amzn.to/3vetBs4 🚧
8️⃣ Exide EB620 MINI Car Battery 🕔 18:55 🚧 amzn.to/2RQkiAU 🚧
9️⃣ Battery Post Wire Cleaner 🕔 19:02 🚧 amzn.to/3gdWyQH 🚧
🔟 Heavy Duty Black Cling Film 🕔 21:58 🚧 amzn.to/3c0sJR2 🚧
⚡Coats and Gaiters is a participant of the Amazon Influencer Program.
www.amazon.co.uk/shop/coatsan...
I may earn a small commission with my affiliate links, though the prices paid are no higher but they do help me fund this channel.
⬇️Timecodes
00:00 Introduction
00:51 Assembling the Control Unit, Hydraulic Unit and Pump
03:47 Refitting ABS Unit back into the MINI
06:12 Cleaning brake fluid from connector block
06:56 Reconnecting the brake pipes
09:26 Torque wrench math for spanner extension
12:34 Torqueing the brake pipe unions
13:39 Replacing the other components previously removed
15:32 Coolant and Power Steering bottles
16:29 Battery Tray
18:22 Refitting ECU
18:54 Battery
22:42 Credits
🎁 Donations to help my Channel Grow 🎁
🎁 Patreon : - - - / coatsandgaiters
🎁 Paypal : - - - www.paypal.com/donate?hosted_...
⚡Other Social Media Links For Coats and Gaiters
1️⃣ Facebook: - - - - - / coatsandgaiters
2️⃣ Main Channel Instagram: - - - - - / coats_and_gaiters
3️⃣ Photography Instagram: - - - - - / coats_and_gaiters_phot...
4️⃣ Tech Instagram: - - - - - / candgtech
5️⃣ Website: - - - - - www.coatsandgaiters.co.uk/
📹Some Of The Equipment Used To Create This Video:
1️⃣ Vegas 18 Pro Video Editing Software for the PC
2️⃣ Focusrite Scarlett 2i4: - - - amzn.to/3u5j4QT
3️⃣ Panasonic GH4 Micro 2/3rds Camera's: - - - amzn.to/3dcwUuz
4️⃣ Panasonic 12-35mm f2.8 Video Lens: - - - amzn.to/3qiglkw
5️⃣ Panasonic 35-100mm f2.8 Video lens: - - - amzn.to/2Nts3Kv
6️⃣ Panasonic 15mm f1.7 Lens: - - - amzn.to/2Zi5OK8
7️⃣ Panasonic DMW-MS2 Shotgun Mic: - - - amzn.to/3phqug3
8️⃣ Rode NT2-A Microphone: - - - amzn.to/3jKbLJw
9️⃣ Pixapro 1500s LED Lighting Panels: - - - amzn.to/2N5RTV5
🔟 Manfrotto 546B Tripods: - - - amzn.to/3rShXlv
Disclaimer:
This video only contains tips and my personal methods that could be helpful when carrying out home car repairs or replacing parts. Coats & Gaiters is not liable for any harm, injury or property damage incurred while carrying out such repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. Coats & Gaiters strongly advises taking personal care and adhering to all safety rules when doing any repair or replacement. The use on inferior or low quality vehicle parts does not guarantee the proper level of road safety.
#minione #abs #minicooper
CK51WXZ
CK51 WXZ
CK51-WXZ

Пікірлер: 34

@CoatsandGaiters 2 жыл бұрын

If you click "SHOW MORE" in the description above your be able to see Links to the Tools 🔧🔨🔧 I use. Also Clickable Chapters📋 📙 throughout the video and other Links 🎬 that may be of interest. I've had a few viewers request where they can buy the tools they see in some of my videos but it's not very clear that the "SHOW MORE" tab has a lot of information in that may be of interest. Admittedly the amazon links are associated with me and I would earn a small commission which helps towards keeping the channel funded.

@GTE465 2 жыл бұрын

Sorry, I can't seem to find my message to reply and say thanks for checking on the voltage for me later on.

@CoatsandGaiters 2 жыл бұрын

@@GTE465 I do that as well lol

@CoatsandGaiters 2 жыл бұрын

@@GTE465 Sorry you didn't say which 2 pins your were measuring the voltage on?

@GTE465 2 жыл бұрын

@@CoatsandGaiters The long black probe, two pins that power the motor. When you put the unit together that probe goes through the block and pushes into the motor connectors.

@CoatsandGaiters 2 жыл бұрын

@@GTE465 Have you got a code reader as C2116 is for Low Motor Voltage I believe. Does look like it might be a bit low. I'd have expected 12v

@themightyimp08 Жыл бұрын

Stupid question, I'm guessing it's good practice to disconnect the battery before unplugging the module connector? Edit: just watched til the end and I can see you had the entire battery out.. But if I wanted to just look at the connector, I'm assuming disconnecting the battery would be a good move

@CoatsandGaiters Жыл бұрын

Normally its safer to disconnect though you may loose the radio code. On the later models there is a risk of wiping the electronic floor module when the battery disconnects which can be a nightmare as you have to send it away on ebay to have it reprogrammed for the lights/indicators/windows to work again. Seems to be a risk which ever way you go today.

@iebah1 3 жыл бұрын

Another great video mate. I can't wait to see if it works!

@iebah1 3 жыл бұрын

If it doesn't work I'm happy to send you some of the integrated circuits I bought to try that fix. I have ten, cost me $8-9 I think! Can send you five free any time.

@CoatsandGaiters 3 жыл бұрын

Thank you for the compliment and hopefully I will find out next week after bleeding the system with new brake fluid.

@CoatsandGaiters 3 жыл бұрын

@@iebah1 Thats very kind of you iebah1. I will have to look into what this chip does that your talking about. I presume it's not the 8 pin EEPROM with the car details stored in as that has to be reprogrammed with a top model vehicle diagnostic computer which I don't have sadly as they are over £500 from what I can see.

@iebah1 3 жыл бұрын

@@CoatsandGaiters No, it's an IC with 9369.1D written on it. It has 14 pins. One of the BMW guys at Bimmerfest, called sudnut, put me onto it. I'd be very happy to have you show me how to do it in exchange for the cheap little chips.

@CoatsandGaiters 3 жыл бұрын

@@iebah1 kzfaq.info/get/bejne/sNObdNh1uLuViqM.html

@geertkolb8964 Жыл бұрын

Hi, I’m having the same issue. 2002 Mini cooper. My abs pump is located on the other side. Now I can remove the module alone without removing the brake lines, but will the brake fluid leak do you think? If not I can easily remove the module without having to bleed the brake again.

@CoatsandGaiters Жыл бұрын

Hi you can remove the electronic module from the valve housing without it leaking.

@catfisher420 2 жыл бұрын

Did your soldering repair work on the module?

@CoatsandGaiters 2 жыл бұрын

Sadly not it's possible the issue was the hair like wires that go to the sensor inside the module. They are known to snap as they are so thin.

@catfisher420 2 жыл бұрын

@@CoatsandGaiters That's too bad. I am having the same issue with a VW jetta. With the new replacement part being over $1,000 I think I am going to have to get one from the junk yard and try to swap the eeprom. Thanks for the great videos

@CoatsandGaiters 2 жыл бұрын

@@catfisher420 that’s expensive. I was keeping an eye on eBay for a second hand unit. Thank you for the compliment on the videos, I do try my best with them.

@catfisher420 2 жыл бұрын

@@CoatsandGaiters I got great news today, My ABS module has a recall on it! getting it fixed for free!!

@CoatsandGaiters 2 жыл бұрын

@@catfisher420 Well done, that's awesome.