Part 3 - Removing MINI Cooper engine R50 R52 R53 🚗from engine mounts to complete engine removal.

Рет қаралды 6,692

Күн бұрын

Пікірлер: 37

@CoatsandGaiters 2 жыл бұрын

If you click "SHOW MORE" in the description above your be able to see Links to the Tools 🔧🔨🔧 I use. Also Clickable Chapters📋 📙 throughout the video and other Links 🎬 that may be of interest. I've had a few viewers request where they can buy the tools they see in some of my videos but it's not very clear that the "SHOW MORE" tab has a lot of information in that may be of interest. Admittedly the amazon links are associated with me and I would earn a small commission which helps towards keeping the channel funded.

@vespamorelli7090 3 жыл бұрын

Singularly the best series of videos ever created on the R50. The attention to detail is stunning. My only criticism is that sooner or later you’ll move on to a different car ! Cannot recommend this channel and these set of vids enough. Love them!! Hope to see a complete nut and bolt engine strip down of the R50 engine soon 🤞🏻🤞🏻🤞🏻🤞🏻

@CoatsandGaiters 3 жыл бұрын

Thank you so much for that Vespa Morelli. Have no fear I have no plans to stop making MINI videos. I will be taking the Peugeot 207 engine apart that’s in my barn but that’s the same engine that’s in the 2nd generation anyway. MINI’s are here to stay as I love them. If anything I am searching for an earlier original one and later ones to make videos on.

@neilhampson2843 3 жыл бұрын

I have just read in the comments about your poor mans pressure washer, I am on with making one. It works a treat. Well done. Doing the voiceover is a stroke of genius, much better than trying to do it as you go.

@CoatsandGaiters 3 жыл бұрын

Thank you Neil. Good luck with your pressure washer. I think voice over gives you chance to research information so hopefully I can give accurate information.

@alundrasrt 3 жыл бұрын

This hot pressure washer or a vapor thing is a must have for proper cleaning. So satisfying to see dirt falling.

@CoatsandGaiters 3 жыл бұрын

It's a poor mans hot pressure washer lol. I know the proper pressure washers use hot water not cold so I had the idea to fill my sprayer with hot tap water, pressurise it with the air compressor and spray away. Works a treat for on the cheap.

@ruedigermueller3694 2 жыл бұрын

Hello Mark, I have never seen such a detailed description and so perfectly clustered (and I have viewed many). You are grrreat!!!

@CoatsandGaiters 2 жыл бұрын

Thank you so kindly for your compliment Ruediger.

@user-si8og2th9y 3 жыл бұрын

Awesome! The best video I have ever saw about R50, Very helpful !

@CoatsandGaiters 3 жыл бұрын

Thank you for that, hope it helps if you have to work on it.

@Jolly-Sid69 2 жыл бұрын

I like to see your job well done. There are few mechanics who do everything so aesthetically and explain well what they do. greetings Roger

@CoatsandGaiters 2 жыл бұрын

Thank you for that Roger. Much appreciated.

@kevinsemrau4750 11 ай бұрын

Hi Mark thanks for video. Helps out a lot with referencing. For your own info, the random red wire you had is for the aircon compressor clutch. Must just be a UK thing to not have aircon. Makes the Job a little harder trying to get those parts out the way but your video certainly made my life easier

@CoatsandGaiters 11 ай бұрын

Thank you for the comment and the answer to the red wire. Take care.

@maxxmaxx7393 Жыл бұрын

UN GRAN TRABAJO SEÑOR. GRACIAS

@CoatsandGaiters Жыл бұрын

"GREAT JOB SIR. THANK YOU" Thank you for the compliment Maxx Maax hope it helped you.

@rallychamp2003 2 жыл бұрын

Hi Mark, thank you so much for taking the time to make these truly excellent videos. My young nephew has a 2006 mini with an overheated engine so, thanks to your videos, he's going to attempt to replace it with a second-hand unit (long engine). It will be his first major automotive task. So, my request to you is - please, please make a series of videos showing how to INSTALL a mini engine! Including refitting the gearbox.

@CoatsandGaiters 2 жыл бұрын

Thank you so kindly for that. As you may have seen I have removed the engine, removed the gearbox and taken a look inside and I will be replacing it all so I will be continuing the series where I put the engine back in and hopefully it works lol

@jedschleisner8960 2 жыл бұрын

jolly good Job Sir!

@CoatsandGaiters 2 жыл бұрын

Thank you

@peskachina 3 жыл бұрын

Great Video! thanks for sharing

@CoatsandGaiters 3 жыл бұрын

Thank you, hope it come in handy for you.

@peskachina 3 жыл бұрын

@@CoatsandGaiters Actually i really hope i will never need it, but in case...I will know what to do ;-)

@CoatsandGaiters 3 жыл бұрын

@@peskachina Would give you a heads up at least lol

@ivanmoralesvelazquez9808 Жыл бұрын

amazing video :)

@CoatsandGaiters Жыл бұрын

Thank you

@withgrowinginsanity198 3 жыл бұрын

Better than the green sheets… check ;)

@CoatsandGaiters 3 жыл бұрын

Thank you for the comment lol. They look much better than that old green thing I had before. My step daughter bought them for me for Father’s Day.

@withgrowinginsanity198 3 жыл бұрын

@@CoatsandGaiters few more fathers days and you will have a fully equipped studio ;-) But actually the audiovisual quality is already above standard.

@CoatsandGaiters 3 жыл бұрын

@@withgrowinginsanity198 I've had to drape black out fabric for the next part with the clutch as the engine will disappear into the mess of the background. Engine/gearbox now on the table out there for splitting of the clutch/gearbox.

@leroijr407 Жыл бұрын

Great video sir. Thank you. Debating on removing entire assembly as you did, or just the transmission. Have a broken belt. What do you think?

@CoatsandGaiters Жыл бұрын

Thank you. Is yours an auto? Broken belt ?

@robinrose5283 2 жыл бұрын

Hi Mark, Great video, I am removing a cooked engine from a 2005 Mini to replace with a reconditioned bare one and have found it very useful. My only comment, is it really necessary to remove the serpentine belt, alternator, water pump and inlet manifold in situ, surely these will come out with the engine when lifted?

@CoatsandGaiters 2 жыл бұрын

Thank you and if I can recall you probably don't need to remove those items. I just did to show the process step by step so viewers could see how each item is removed.