I want to credit Arglin: kzfaq.info/love/CxGlad0Fo77qqSjRIQ03IQ for telling me about the different hydraulic expansion speeds.

My favorite type of poly bridge video is "not making a bridge in poly bridge"

Normal people in poly bridge 2: builds bridges Reid: yes lets make a scooter-shooting tank

“Reenacting WWII in poly bridge”

Everyone gangsta till the bridges start going to war.

Video idea MOBILE BRIDGE A bridge that doesn't start in the gap But on the land. When you start the mobile bridge will move to the gap, put itself in the gap And detach the wheels until the only thing left is a plank

10:26 it is not actually weird for the tank to be shooting in the opposite direction it moves, in fact. During WW2, Britain made a tank called the Archer, this tank was a tank destroyer that would solve a problem that troubled British tanks. The transmission in British tanks were good, but the thing is, although they were good at the time and allowed the tanks to go fairly fast, they couldn’t go fast in reverse when retreating. And this is a big deal because if they wanted to retreat fast, they would have to turn the tank around in order to make the tank retreat faster by facing the tank away from the Germans. The thing is, this would make the crew and engine more vulnerable because the back of a tank is the weakest point. And if they didn’t turn around to retreat, the Germans could have just flanked or surrounded the British tanks either allowing the.British crew to surrender or destroying the tanks with the crew in them. And I’m not sure if this happened or not, but because the reverse on the transmissions was so slow, there could have been a time where some retreating British tanks actually was captured because they ran out of fuel(not because of the low supplies Britain had). This is where the archer comes into play. What Britain did was they got a common tank hull(either the valentine mark I or mark II hull, and they modified it a bit by reinforcing the back of the tank, thus making the front weaker, and they added a 6 pounder(I believe and yes, The British even called it a 6 pounder even though Britain was either already done or was transitioning to the metric system). The 6 pounder is a heavy gun, so they had to add weight to the front. And what they did to the gun was special, they flipped around thus the gun would face forewords. This tank was built with retreating in mind. So when this tank was put into battle, the tank would move forwards. And if the crew saw any infantry, they had a machine gun facing the opposite way of the 6 pounder. So when the tank crew spotted some Germans, they would turn the tank around, and start moving “forewords”/reversing towards the Germans and stop to fire. This was slow. But if the tank crew needed to retreat, the tank didn’t need to turn around, all the tank driver needed to do was put the tank in drive/gear and move forewords fast, this would still allow the tank to fire still and still offer protection to the crew

Respect for this guy for making a tank in a bridge building game...

I Love how makeshift everything is in this game A Chain of roads to bias the rotation, Lmao.

build a truck that can make its own bridge and drive over it and the pick it up again

I see that the armored vehicle has received an upgrade and now is a true *TONK*

Your ingenuity is mind boggling.

Surprised nobody has talked about the engine. It looks so cool! Your original design literally looked exactly like a V2 engine.

'Strategic retreat tank' ~ France wants to buy these. The tank looks bit like WW2 soviet tank destroyers, like su-100 and especialy su-152

Looks like I was wrong. Thought for sure it was a wooly mammoth. 🤔

15:20 Reid: at which point the tank stops moving Tank: *having a seizure*

Well, you made a working tracked vehicle and engine in game about bridges :D It's like creating a portal gun in catering school xD

14:32 the best ever illusion. is it 2D or 3D?

11:41 a "strategic reverse tank" I think the word you're looking for is "french"

The fact that you implemented track tensioning is making The Chieftain very happy.

Google: I know everything Wiki: I have everything Reid Captain: *I can build anything*

So this is what captainsauce means when he says, "Bridge Biologist."

It's so impressive that physics in this game is so great that you can make such a complicated mechanisms in a game, designed for making bridges

I'm just waiting for the part "Making a bridge in Polybridge"

This guy: *enters all sorts of competitions and makes different things that are usually impossible to make in poly bridge* Me: *happy when my 1-1 bridge doesn't break*

Ah yes, another underrated KZfaqr that deserves more credit

Kinda cool how it kinda works like a real engine with pistons and stuff

What if Golden Gate Bridge did this I think that would be cool I think. Like you agree

Can we all appreciate the apfsds round this guy just made

This tank is interesting. In the 1930’s people decided to place the engine in the front of tanks. This worked for cooling, but had to have a reduced crew( e.g no loader.) putting more strain on the commander to reload, fire, and aim the tank’s turret. I have no explanation for the gun. Maybe a front engine, anti-tank vehicle.

So what your saying is: we're getting two uploads a week?

That looks more like a crane than a tank to be honest.

could have called it the archer, because that was an ACTUAL TANK with a backward facing gun.

i'm struggle to build a bridge and this dude happily build a whole tank

Awesome Tank and incredible problem solving! Now make the panther proto type. The driveshafts must break easily.

RCE and Reid Captain: **building a tank in polybridge** Me: **visible happiness**

This should be added to the series of tanks which has cursed design

I feel like a cam and shaft engine would’ve easier to make (it’s basically what old steam powered trains used) unless of course you were going with a more authentic engine. Either way, good job on making a tank!

could you make a hour long almost uncut video with your voice live with it? we would love that

imagine you were in a real war and this giant, complicated, venerable tank came out of nowhere and shot a piece of road at you XD

A solution for the getting over stuff problem could be: bigger wheels

Nobody Reid captain: I ma build a tank in a game for bridge building

The track layout reminds me of the British tetcrach light tank from early ww2

Bridge, nah. Tank, nah. Bridge tank, GENIUS

The new Strategic Retreat Tank®

Idea: make a walking machine that moves with legs rather than wheels or treads or any of the sort

Yesssss, I’ve wanted you to do this for a while.

this tank looks more like a combine harvester than a tank but still, nice job

I cant wait for "Making Minecraft in Poly Bridge", and then shortly after "Making Super Mario Bros in Minecraft in Poly Bridge"

Idea: what if you connected the wheels to the tread chain using a really long cable? One long enough that it's never fully stretched.

Strategic reverse tank, you should market that to the french

Cool! Also, thank you tank!

6:48 You have made the KV-2 :p

'If bridge don't work, make tank' - Sun Tzu, The arts of war

You're a maniac, and i love it.

Interestingly, if I had the ability, I would try doing a christie-type suspension.

Remember this game is about building bridges

There’s a settings in the object physics menu or something that makes it so joints or whatever they are called the yellow dots well there’s a setting which makes the object collide with them so you can do a chain out of anything. Or are the dots called nodes.

I wish you could select specific peases to be unbreakable so you could try to make a legiamit bridge to carry a tank like his

5:36 That subtitle is right and made me laugh!

Best youtuber when im bored

Next video: *Making a nuclear reactor in Poly Bridge 2*

i love how i tiny car can destroy a bridge but a tank cant

Maybe try studying WWII tank suspension designs and making a second tank? Americans made a good replicable suspension called bogey wheel. Worth a look

suggestion: you should try out trailmakers, great game and you can build so many different things

This man for real made the Schwerer Bridgestav

"I came here to see a tank... - not to have my brain melt"

Looks like monster KV-5. GREAT JOB COMRADE! Politbureau will give you a medal

wait didnt you already do this? Great vid btw

Pretty sure the game developers even wonder how you made that

Remarkable! A bridge that crosses bridges, Tank you!

u should make a tank launch cars that would be hilarious and i just realised ur doing it.

Too bad there isn't linked chain that created cogs could bite into - it seems like this might be a good addition for the game - cogs, pulleys, chains...

havent watched in so long you are still good youtuber

Poly Bridge:No You have to make a Bridge Reid Captain:Lets make a NOT Bridge

Next would be a perpetual motion machine

You gave me Mumbo Jumbo vibe from this video

Okay but now make Tankdestroyer1 in polybridge.

Yo can you do more Kerbal Space Program vids?

Strategic retreat tank Bro lives in the future

5:38 linear could technically be correct here, if what you meant by linear is constant rotation speed (because the definition of linear is kinda a change which stays constant)

Teacher: No making paper tanks in the back of the class! the home depot kid: I can make that 300x bigger

Cool, now make a bridge for your bridge tank

You are a genius

this thing is as about as reliable as real ww1 era tanks

This went from building a bridge to building a tank

rare footage of the Bridge Tank Destroyer

Ah yes, that's what i call "Engineer Gaming".

holy cow, that is complex.

Judging by the size of it... this is more related to the Gustav cannon than an actual tank.

move the pistons to 120 deg out of phase with each other

We need a bipedal walker

This is like the schewer gustav except its not on rails

İ like how you do jobs step by step good.

I have a idea for a challenge. Do random levels made by people and whatever is placed has to stay and used.

poly-bridge creators: that's not how it's played

You are really genius

This man needs at least 500k subs

this guy is the mumbo jumbo of poly bridge

The piston mechanism looks like the Kabbalah tree of life