Reinstalling a Ford Barra Timing Chain

Рет қаралды 17,496

2 жыл бұрын

While waiting for parts to arrivel, I decided to quickly throw this motor back together to keep it protected and thought i would try to explain some tips on reinstalling the timing chain!
Follow me on the socials!
Facebook: / evrythingfuzzy
Instagram: / evrythingfuzzy
If you'd like to get in contact with me:
Email: info@everythingfuzzy.com.au
If you dig the music in this video, check out Fictitious Me on Spotify:
open.spotify.com/track/6pz4Dr...

Пікірлер: 56

@senaddulic9454 3 ай бұрын

Very nice video !!!

@Marty-iw8if 2 жыл бұрын

Great video for anyone in the process of rebuilding a Barra. I searched everywhere & found this so thanks!

@EverythingFuzzY 2 жыл бұрын

Glad it helped! In the process of filming a few more builds at the moment. Thanks for watching!

@Marty-iw8if 2 жыл бұрын

@@EverythingFuzzY Thanks again Fuzzy!

@anthonycavalliotis8736 Жыл бұрын

Great clear & concise information. Thanks for helping people who want to keep their Falcons Healthy.

@EverythingFuzzY Жыл бұрын

Thanks for checking it out!

@bingwei6359 11 ай бұрын

I did my barra today. after the first time the mark lined up it would not be right again until saw your video. Thanks alot !

@robert3325 15 күн бұрын

Good help. Do I have to remove the engine from my 2007 territory, vin no... 6FPAAAJGAT7C58316 To supply and fit a new timing chain kit? Thanks...Regards, rob

@julianalderson3938 4 ай бұрын

Yer thanks mine has run bad. Then nec day fine. But think its the chain. Can that happen? Thanx

@charlieg5360 2 жыл бұрын

They should line up every 38 turns according to the ford manual.

@dalestenhouse2757 3 ай бұрын

Thank you for your time

@davesmith6754 2 жыл бұрын

I never knew that about the timing chain going out of sync after one revolution.... It would have screwed with me also, thanks for the info mate 👍👍

@EverythingFuzzY 2 жыл бұрын

Thanks for watching!

@royboy620 2 жыл бұрын

another excellent video, helping people learn.Nice work mate .

@EverythingFuzzY 2 жыл бұрын

Glad you enjoyed it, thanks for checking it out!

@tuberider1171 3 ай бұрын

that was great - I'd like to know more about the torque settings if you're able to send a link - anyway - that was great and I hope your arms are ok now

@EverythingFuzzY 3 ай бұрын

Thanks for watching! Check out my video ‘reassembling a barra engine’ i put torque specs in the video as i was building the motor.

@tuberider1171 3 ай бұрын

I should have checked first.. thanks for the great info..it must have taken you ages@@EverythingFuzzY

@Kitcat8357 2 жыл бұрын

Great video thanks so much.

@EverythingFuzzY 2 жыл бұрын

Thanks for watching!

@dandel351 2 жыл бұрын

Nice video to learn stuff while 'windmilling' to the tunes in the background🤘🤘🔥

@EverythingFuzzY 2 жыл бұрын

Thanks for watching! If you dig the tunes and want to hear more check out Fictitious Me on spotify open.spotify.com/artist/2UFJZsI9SSC9dXpRGBvlcK?si=XKtdEOp_R1GGATa8R5ZwYQ

@stephensmith8300 4 ай бұрын

Brilliant mate I have no idea how to do this but I love watching you do it

@matthapaq9618 3 ай бұрын

You are a TRUE LEGEND 💪mate No you are our Treasure please never stop give what knowledge you have 🥹☺️🫡 Thank you Sooo very Much for your time sharing with all of us a knowledge 💪🙏🏻🫡 Cheers Matt

@paulmader9516 Жыл бұрын

Nice work, and the camera work was fine. l also liked the matt black painted block oh you probably already know this but its worth mentioning. when you put the cams n cam cages as l call am lol back on they have to go back in the same spot you removed them from also the bolts as well. Especially if you've put new cams in. Otherwise, you'll get uneven wear n a really annoying slight friction sound or worse, a grinding sound.

@nathanfarry6825 2 жыл бұрын

Great vid 👍

@camsbarra2480 2 жыл бұрын

As long as bottom is at tdc and the dots on cams are both up top the chain will be 8 links apart No need to check colour markings all the time

@NathanCroucher Жыл бұрын

What was with the 150 turns then? Pin this comment.

@ir0nal3x97 Жыл бұрын

@@NathanCroucher I think it was 147 turns for the colour links to line back up with the markings perfectly?

@NathanCroucher Жыл бұрын

@@ir0nal3x97 i dunno, ill be doing this job soon will probably check manual, not keen on this turning business.

@locallyhated1188 Жыл бұрын

this was a great video for Barra leaners

@EverythingFuzzY Жыл бұрын

Cheers!

@AngryGermanGarage 2 жыл бұрын

Love barras.

@EverythingFuzzY 2 жыл бұрын

Love you… in a non gay way, of course.

@markedwards4331 10 ай бұрын

Really good video but the music almost made me stop watching.

@julianalderson3938 4 ай бұрын

Goin to mechanics anyway but not good when its off.

@747Mode Жыл бұрын

Thanks mate! looks like the trick is putting the crank gear on the chain then putting it on the snout, was trying with the gear already on the crank last night and it wasn’t close at all

@EverythingFuzzY Жыл бұрын

Yeah it can be really tricky! Thanks for watching!

@747Mode Жыл бұрын

@@EverythingFuzzY Yep can confirm went on reasonably easy once the keyway was in the exact right spot. Thanks!

@fazzaharold9017 5 ай бұрын

Hey mate might be a silly question but can you change the tensioner without remaining the timing cover?

@mansourjreige677 9 ай бұрын

Hi mate I'm getting a ticking noise out of my fg 2010 Factory gas . Seems internal. have you had an experience with this problem?

@julianalderson3938 2 жыл бұрын

Yer was with a bro years back. Had deisel hilux. Was runnin shit. He said prob timimng n was right. Always owe em for it. Cheers ray!

@18624100 2 жыл бұрын

Thats another great video on the barra helps me to fix mine any chance of a short video on the common oil leaks on the barra and how to fix thanks your a champ .

@j26660 Жыл бұрын

I've had atomic chains and guides installed by my tuner and the engine has chain resonance rattle between 1200 and 2200rpm. Any ideas on what I can do?

@EverythingFuzzY Жыл бұрын

No idea, sorry mate. i've got 2 sets of atomic chains, guides and tensioners and never had any issues! Maybe replace the tensioner and see if that fixes anything. Thanks for watching!

@warbo917 Жыл бұрын

I fitted an atomic posi-stop tensioner and had the same issue from 2200rpm. Fitted a factory ford tensioner and no noise now.

@mazdagine 2 жыл бұрын

Do you just run a bead of gasket goo on the timing cover ?

@EverythingFuzzY 2 жыл бұрын

Sure do, mate. Checkout my assembly in 12 minute video to see how. Thanks for watching!

@SpeedOfThought 2 жыл бұрын

Great job, I applaud you! May I ask why you put the sump on first? Mine's still off as I had to reseal it and now i'm hoping I haven't missed anything..

@EverythingFuzzY 2 жыл бұрын

Thanks for watching! Just how I’ve been doing it. I recently started putting the timing cover on first and i think it seals much better.

@AngryGermanGarage 2 жыл бұрын

Hello friend. This is an excellent video and has helped me with my personal barra project. Quick question. Do you know the talk settings for the cam gear bolts?

@EverythingFuzzY 2 жыл бұрын

Not shore srry

@km-gi4lw 2 жыл бұрын

20 Nm then turn extra 40 degrees..see fordforums. 10 mm is not as tight as 3/8" on those front plate bolts. Rounded heads from 10mm socket on 3/8" bolts. Ford is mostly Imperial (inches). Agree with the positive remarks plenty of help to the Barra fixers.

@nathanfarry6825 2 жыл бұрын

Way better doing it yourself never done a chain before but yeah awesome stuff and will save me a lot of coin

@EverythingFuzzY 2 жыл бұрын

@NathanFarry Thanks for watching!