This is the first video I found explaining exactly how the bolts and washers should be placed. Thank you so much!

Dude! Harbor Freight sells boxes of nitrile gloves cheap. There's no need to get your bare hands right in the fecal residue. Also, some people say it's better NOT to caulk around the toilet so you can detect any water leakage before you rot out your subfloor.

I installed one in my bathroom about 2 years ago (new flooring, vanity and sink project). No problems thus far. My old cast iron flange was 1/2" -3/4" below the level of the floor so I didn't bother to remove it. I was able to install the exact same plastic Oatey flange over the top of the existing cast iron flange. Kinda unique situation I suppose, but certainly saved myself a little time. Also, used the old wax ring to seal around the base of this replacement flange too. No silicone used. Interesting that you too had a little difficulty with the screws securing/gripping to the wood. The angles pre-drilled on the plastic flange could be a little better to accommodate the screws. There's a little angle to them, but they could certainly be improved. Got about 4 or 5 into the wood, but missed on 1 or 2 others too. Overall a pretty easy install. Very happy with the end result. No water or weird gas leaks either. Definitely hit a home run with this DYI project. Also, I used a 3/4" thick Sani Seal elastomer rubber type of product in lieu of the traditional wax ring. Very easy to use and can be reused too. It has a tacky/sticky feel to it and seems incredibly strong/lasting product. There are many different thickness sizes available and also can be with or without the plastic cone attachments. Only a few dollars more than the old fashion wax ring (own a 1/2 dozen of these but doubtful I'll ever use them other than sealing around the flange as I recently did with the old wax ring). Other: drilling out the old lead and using a tool to lift it/pry it out is much better technique than trying to melt it out like another KZfaqr did on his channel. Lead fumes are very toxic and harmful to your health. Good to see that you've got a much safer way of removing it.👍

First, after moving the toilet, stuff something into the pipe to keep debris out and sewer gas in.

Robert I really like your video, very detail , self explanatory , 👏🏽👏🏽👏🏽I have exactly the same issue that my project for the weekend now I really feel confident , thank you so much 🙌🙌🙌

Just saw you remove the toilet and I can already tell you what the problem is: the flange sits below the tiles instead of slightly above them. Cheers.

The first thing I want to say is this was a life savor for me. I didn't even know the metal flange cover. Worked like a charm for me. So thank you for the video! Second, I have to agree with a few comments here: wear gloves and plug the hole! Last thing you want is that nasty wax going down the pipe. I don't know about the wax-less seals. I've read they break down sooner than the wax.

Well done. I did not get to see you remove the screws that originally held the flange to the subfloor. But you did show your replacement of the screws and that was well done, good job of problem solving there. Thank you. I'm subscribing.

watch too many videos before I found yours that fit my issue and a lot less cost. Thank you for this video!!! Now I can use savings for spare car parts! LOL

Perfect- I was wondering if I could connect the replacement flange directly to the cast iron flange and you answered that. thanks- great video

bleach. pinesol, and latex gloves a must. Turn vent fan and plug drain pipe with damp rag or stopper. I prefer flange repair kits by Denco

Thanks for the great video with all the details. I appreciate how you talked us through it with the details, like not cracking the porcelain, etc. Subbed.

That groove in the bolts is there so that you can use pliers to break it off.

One wear gloves to avoid septic poisoning. Two, cover the inside of the opening with heavy newspaper or rag wide out not to fall it and not have to smell the stuff.

Great job and video.

Dude just raw dogged that with no gloves, and then got shit all over his tools!😂

Thank you Robert. Very Helpful!

A pvc spacer on top of that flange with a new wax ring. Would have been a better option. But job well done. There is more than one way to skin a cat. Or in this case repair a flange.

I’m no pro but I’ve done a few of these in my ti e. I’ve always seen a couple nuts securing the bolts to the flange the another set to secure the toilet

As a plumber, this is not professional at all.. I couldnt do that in a customers home. He already failed at no gloves removing the wax ring. Gross and uncalled for. thats a real mess.

Is it safe to caulk around the toilet? caulking it will hide the water if you get another leak?

What kind of screws did you use. What brand and what type.

Very helpful. I will try to do this.

Thanks, I believe I can do it!

Thank you for the video.

Thank you for making this video!!!

Looks like the flange is sitting slightly beneath the tile floor? This may be what caused the leak in the first place. Better fitment is to have it slightly above or flush with the tile floor.

It's a removable 1/4" flange riser on top of the flange itself. It's used to get the flange flush with the tiled floor. Securing the toilet to this plastic ring is not secure enough imo.

Thanks for the video!

I have the exact same situation and this is going to be my plan of action as well. Thank you for the video. Looks great 👍

Great video, thanks!

Thank you so much. I'm a widow and I may just try this myself to save some money instead of hiring a plumber.

Great job! Thanks.

All good great thank you😮❤

Good job ILike that teacher

Hi Robert! You should consider making an appearance on your other channel. People are worried about you. Great content, by the way!

Two words: Gloves! One more word: Use them!

Need to use flat watcher ring and a nut to hold the bolts

If there’s nothing under the black flange screws but dirt, then WHAT is holding your entire flange to the actual floor???? If it’s just the glue between the connections of the sewer pipe, then you’re risking later cracking EVERYTHING if people shift side to side on that a lot. You need a whole new flange and make sure it’s secure to SOLID SUBFLOOR under it!

Miracle he didn't need antibiotics after this job glovefree😂😂😂

By drilling new holes in the flange, you are weakening it and guaranteeing that it will break under pressure.

Yeah make sure when you doing that sticker rag in that hole which he didn't do 😂👍

I had to drill holes into concrete for my toilet and the screws had nothing to bite . I didnt have those plastic pieces so i dropped tooth picks in the holes and the flange is super secure

Where are his gloves? Not a prima donna but raw sewage is dangerous. And he has a bandage on his finger already. Open wound! Be safe!

Don't ever use the metal should be rust!!!

please wear those blue rubber surgery gloves.

Heeeeeeey!! Long time no see, eh!

Why is this going to stop the leek! If the broken flansh still there!!😂

No groves. I hope you’re not preparing dinner after fixing the toilet.

This was nauseating. The amount of touching and poking that ring is DISGUSTING!

Gloves, Dude. Gloves.

Gloves

dude wear gloves and use a rag for the sewer gas.

Hey, 🍔 and 🌭 ready. Time to eat😅

This is what happens I guess when you shake your ass on the toilet trying to get those hanger ons to fall. I dont stop a wipen till its a whitten. Yes gloves and something to block the gas. A rag or cup is good. Heard those plastic seals are not that great compared to the wax. I mean it looks great but any Plumbers have there views on what sealer to use ? Also that flange attachment looks like it might lift the toilet to high. One of theose jobs thst may not last. 13:24

Don't ever caulk around your toilet, if it's leaking you won't know for awhile and it will rot the floor.

When the floor around the toilet flange is rotten, I am sorry but the right thing to do is bust that tile and replace the subflooring then retile also that old flange needs to be cut off and replaced with a twistNset flange, screw that to the flooring you just replaced, flush with the floor not below it then install the toilet with a wax ring.

Nice job! Would this work for cast iron as well? Also the bolt holes ended up being in same location? What happens if they're off a bit? Thank you so much. Check my page for my flange problem. Hopefully its just a bad wax ring on a low flange.

once you drill the holes for the screws your going to crack or break the old bottem ring

Man you are going through all that trouble to pull out the toilet and not replace the flange ? , gloves and a garbage bag for all that junk 😅 YIKES 😮

Wear gloves dude!😂

No gloves wtf

Must have missed it but never saw him put the new wax ring on...oh well, he must have or it would have leaked.

First of all dude, WEAR GLOVES! That stuff is nasty and it only takes a second to tpuch your face or uou have a cut on your finger. So please glove up. Otherwise good video

GLOVES!!!!!! WTF

It's a freaking toilet. All you glove people: hello Didn't you ever hear of 'soap'. The world is covered in shit and, sooner or later, you're gonna get some on ya.

Hope you cleaned the fecal matter off your camera and tools.

I watched this 2.5 years ago and it did NOT WORK! Do NOT buy this, go with the wax ring!

No gloves… 🤮

Wow dude your bare hand lol 🤮

wear a glove please