You indicate that 80 inch uprights are 80 1/2 inches. Correct. Note that the 93 inch uprights are 92 inches. That inch makes a big difference to try to squeeze in the the larger rack into an 8 foot ceiling with a reverse mount multi-grip bar. By the way, the height on a reverse mount multi-grip on the 93 inch rack is about 2 1/2 inches higher than a regular mount multi-grip bar on the 80 inch rack.
@DesignBuildLiftАй бұрын
This is very useful information! Pinning this comment! Thank you! 🙏
@Jerkysan8 ай бұрын
I'm looking at buying one of these and you took all the confusion out of it frankly.. Rep should pay you just because you took the time to explain everything. For instance I was calculating space needed and totally forgot the actual 3" requirement for each leg. I'd of been 9" off just because of that. I appreciate your work.
@DesignBuildLift8 ай бұрын
Thank you! Rep does pay me a commission if you first click on my affiliate link before shopping on their website. ..when I was measuring everything before I made my purchase I ALSO was not accounting for the 9” …gladly I still had enough space! 🤘🙏💪 THANK YOU for your support!
@wgrace55227 ай бұрын
The spotter arm tip was worth the price of admission. Thanks!
@DesignBuildLift7 ай бұрын
Thank you for your support!!! 🤘🙏💪
@tecbox78 ай бұрын
This is without a doubt the best buying guide review I've seen on the Ares Attachment. You did an amazing job putting this video together and I really appreciate the extremely helpful tips you provided for configuring this equipment. REP needs to put you on their payroll!! I will be certain to use your affiliate link when I place my order.
@DesignBuildLift8 ай бұрын
Thank you so much! I really appreciate it!!! 🤘🙏💪
@mrrey2cool6 ай бұрын
Wow! Brother you really nailed it with your complete explanation and comparison. I was going to make the purchase with the accessories I thought will work for me and your explanation safe me some cash without compromising my build. You are amazing brother. Keep up the awesome work.
@DesignBuildLift6 ай бұрын
Thank you so much! Glad to help! 🤘🙏💪
@Decaf_Oatmeal9 ай бұрын
Awesome Video! Probably the most thorough, well organized, and honest equipment review I’ve ever seen!
@DesignBuildLift9 ай бұрын
Wow, thanks! I really appreciate your support!!! 🤘🙏💪
@jcop143 ай бұрын
That was a great review. It literally answered every question I was asking myself re: the new Rep Ares 2.0. Thanks!
@DesignBuildLift3 ай бұрын
Thank you so much! I greatly appreciate your support!!! 💪🤘🙏
@ronhoover55169 ай бұрын
Probably the most comprehensive and helpful video I've seen to date on the Rep racks and Ares attachment. Love the detailed explanations on each option, Peege. I'm going to re-watch this several times. I've got an older Body Solid rack and have been on the fence about upgrading for some time. You definitely got me going with this one! Now-how much fun was it to assemble? This obviously took a lot of your time and effort (as well as $$!) but it is worth it. We can all say a hearty "thank you"!
@DesignBuildLift9 ай бұрын
Thank you so much for your support, Ron!!!!🤘🙏💪 This took me 4 days to assemble it. But I took lots of breaks and did it myself. You get get it done in one day if you start in the AM (remaining focused all day) and could finish that night if you have someone who knows what they are doing helping you. Also Rep has a pretty good assembly video on KZfaq which helped me a lot.
@ronhoover55169 ай бұрын
@@DesignBuildLift Peege how well do incline bench presses work inside the rack? I know one downside of my BS rack is that the bench position isn't the greatest because the rear lower crossmember on the rack collides with the rear legs of the bench. I've had to move the bench far enough back, that the rear bench legs sit slightly outside the rear of the rack. It's never been ideal. Wondered if the Rep 5000 has that issue although I'd assume it doesn't. Seems like the long spotter arms inside the rack would solve this problem.
@charliemarino98137 ай бұрын
So many useful tips, helped me rethink which setup I’m planning to go with and which basement area I’m going to use. Thanks man!
@DesignBuildLift7 ай бұрын
Glad to hear it! Thank you, Brother!
@MrGrigs6819 ай бұрын
This was a great video. I first thought there was no way am I watching another REP rack video for 20 minutes......but I did and it was time well spent. Instead of being just an ad for the company's product, you gave us the info we really needed. Thank you.
@DesignBuildLift9 ай бұрын
Thank you so much Mr. Grigs!!!!!! I sincerely appreciate it! 🤘🙏💪
@HughLeFitness9 ай бұрын
My guy Peege droppin' that wisdom.
@DesignBuildLift9 ай бұрын
Thank you, Hugh! I appreciate it!!!!🤘🙏💪
@motojon767 ай бұрын
Absolutely the best Ares buyers guide! Thanks.
@DesignBuildLift7 ай бұрын
Thank you so much for your support!!!!!! 🤘🙏💪
@vintageweightspghАй бұрын
Really nice job working through all the options!
@DesignBuildLiftАй бұрын
Thank you, Rob!!!!
@nico364116 күн бұрын
What a great explanation and video!
@DesignBuildLift16 күн бұрын
Glad it was helpful! Thank you so much! 🤘🙏💪
@derekdaz7 ай бұрын
Man, this is by far the best buyer's guide for this. Thanks for the video. I've heard some complaints from other reviews about the low row being annoying to work with. Do you have the same complaint? I'm probably going to go by the PA showroom in the near future to try it out...I'll let them know you sent me!
@DesignBuildLift7 ай бұрын
Thank you! I have no complaint on the low row. What was the problem you heard?
@derekdaz7 ай бұрын
@@DesignBuildLift That the low row is really low and that you have to lift the bar over your feet to get started. Seems fairly minor. Also wanted to say thanks for mentioning your height. I'm 6'5 so range of motion and reach for these functional trainer/lat pulldowns is very important to know!
@blindedbythelight51199 ай бұрын
I love the 70s Show transitions lol
@DesignBuildLift9 ай бұрын
Holy moly! I never made that connection before! Wow! 🤯
@Ricanstruct5 ай бұрын
Awesome guide, I appreciate the work you put into this. Extremely helpful!
@DesignBuildLift5 ай бұрын
Glad to hear it! Thank you so much!!!!
@carps_gym9 ай бұрын
Yeah, I was starting over building a new gym from scratch. I’ll definitely take a look at this piece again.
@DesignBuildLift9 ай бұрын
This was the BEST purchase I have ever made. Not just home gym stuff -but literally- anything. I am so impressed with the quality. Every time I set foot in my gym, I feel an overwhelming sense of gratitude that I can have such an amazing piece of equipment in my own home. 11/10 ! Highly recommend!
@robertoquintana86845 ай бұрын
Thanks for the review. It was excellent and definitely using your link when I made my purchase. Just one comment. What is your take on the two point attachment for the pull down bar?
@DesignBuildLift5 ай бұрын
I really appreciate you using my link!!!! 🤘🙏💪! As far as the 2 point attachment is concerned, I was apprehensive about it, and it took a little bit of time to get used to it- but now I prefer it. I feel like it provides better muscle activation. That being said… they also supply you with a banana clip/dog bone (whatever you call it) to connect both upper pulleys together to perform lat pull down on attachments with one anchor point….and the low row bar also has a center attachment point to connect other single point attachments tobit. Hopefully what I typed is clear…bottom line…you can use a double attachment point OR a single attachment point. So they accommodate both preferences. 🤘
@omarherrera9238Ай бұрын
This is AN AMAZING VIDEO! I’ll buy this now because your vid! Definitely using that link of yours
@DesignBuildLiftАй бұрын
Thank you so much, Omar! It’s been over a year now since I made that purchase. BEST decision I ever made for my gym. Still 100% in love with my PR5000 and the Ares! You will not be disappointed!
@joeypolsfut37367 ай бұрын
Seriously thank you for this video!
@DesignBuildLift7 ай бұрын
You're so welcome! 🤘🙏💪
@jacobliston73397 ай бұрын
Great video! I am strongly considering getting the PR-4000 this spring, so this was very helpful. Also, I chucked when you said you "bought the bullet" when you meant to say "bite the bullet."
@DesignBuildLift7 ай бұрын
You have to buy the bullet before you can bite it….otherwise the clerk at the bullet store gets weirded out. 🤣
@jacobliston73397 ай бұрын
@@DesignBuildLift 🤣LOL
@TheRealSheHulk18 ай бұрын
I wish I saw this before I ordered mine a month ago. Great video and advice. Thanks!
@DesignBuildLift8 ай бұрын
Thank you! Out of curiosity, What would you have done differently when ordering? Different safeties? Different J hooks? Something else?
@chrisdonnell25759 ай бұрын
I got two Athena's and GymPin's adapter that combined them goes up to 220lbs for lat pulldowns and rows and you can use bands to increase resistance plus get gym pin plate holder but that is tough as you need 90lbs to FEEL like 45. One benefit of the Athena is you can have open rack and mirror at end and use that to do perfect squats and isolation exercises. Never underestimate the band benefit too a small band can add a LOT of resistance and its at the spot you're typically strongest. Can't use bands on Ares.
@DesignBuildLift9 ай бұрын
Both have pros and cons. I sometimes wish I had the openness of the Athena, but worried that the Plates on the Plate storage would block access to the selectorized stack. Do you have weight storage on your rear uprights?
@chrisdonnell25759 ай бұрын
I used to but at the time rack wasn't as solid and some plates would fall off when I did pullups or dips so I got the XMark rack with wheels and also holds two barbells and I used a ratchet strap to hook into ceiling beams now its rock solid I prefer weights up near front of rack. I have to say I love it so far and ordered Home Depot 36in x 70 inch mirror for the back. I notice I don't squat as deep naturally unless I'm watching my form is horrible and I lean over too much vs go down DEEP. I was going to get just one Athena but once it was installed I loved it and now have two. I wish I went with PR5000 as the Athena cables are on outside and mine are on back which I don't like plus so many attachments I can't buy. Lost 20 lbs in last few months and getting jacked again at 52 and sleeping better and old age body aches are going away so very happy I did this. I also love lifting heavy at around 11am and then will go out after work to do lighter cable work or higher rep stuff which I'd never go to gym twice. On tired days I'll go out and lift for 5 mins go inside for 30-60 mins then another 5 in gym and still get in a workout when I don't want to. Home gyms are the best!@@DesignBuildLift
@DesignBuildLift9 ай бұрын
Awesome! I totally agree that the convenience of a home gym cannot be understated! Especially for us 40+ guys - we need to stay strong to stave off father time!
@wesl-p44003 ай бұрын
Wow! Terrific video!! I'm looking to pick up the 80 inch 4-Post PR 5000 with the Ares attachment and this was the absolute best, most informative and helpful video I've come across. Absolutely awesome job!!
@DesignBuildLift3 ай бұрын
Happy to help! Thank you so much! Much appreciated.🤘💪🙏
@swordphoenix6 ай бұрын
Holy smokes, great idea using spotter arms in the rack! I never thought of that
@DesignBuildLift6 ай бұрын
I love not having to move it in order to move the Ares trolley! Always out of the way! 🤘
@HomeGymHacksandReviews9 ай бұрын
A lot of good info here; especially the piece about the cross-plate height.
@DesignBuildLift9 ай бұрын
Thank you, HGHR!!!! I really appreciate it!!!! 🤘🙏💪
@Davidtresmoore2 ай бұрын
Great video, very helpful, thank you!
@DesignBuildLift2 ай бұрын
You're very welcome! I appreciate it! 🤘🙏💪
@hby77689 ай бұрын
Thank your for the exact measurements!!!
@DesignBuildLift9 ай бұрын
You are most welcome, my friend! 🤘🙏💪
@jameskozlowski54965 ай бұрын
Ares 2.0 is coming out. Pre orders in May 2024. It fixes the issues of doing incline bench inside the rack by moving the weight stack further back. It also raises the low row cables up so its not so low and changes the foot plate and makes it bigger. Also the low row cables are close together so they will be between ypur legs not on the outside. Also the low row pulleys as well as the lat pullys are now also swivel pullys. The pulleys on the vertical posts are also moved to the outside of the mounts sleave giving you a wider range of motion. Glad I waited for these fixes.
@DesignBuildLift5 ай бұрын
I love my 1.0, but I do look forward to taking the 2.0 for a spin at Home Gym Con ( if they bring it with them).
@haroon4202 ай бұрын
This was probably the best Rep PR5000 breakdown. Solid job buddy.
@DesignBuildLift2 ай бұрын
Thank you so much! I appreciate, Brother!!! 🤘🙏💪
@Fathom5559 ай бұрын
DBL - great video, well done. Your PR5000 & Ares are wonderful - nice choices. What are your thoughts on similar gym racks out there which also include the Smith machine? Is that something you considered? Just wondering. Thanks for sharing this video - again, well done.
@DesignBuildLift9 ай бұрын
Thank you so much!!!! If I had the ceiling height to have an “all-in-one“ rack tall enough where I could store the smith machine bar completely out of the way when not in use, I would consider it. But since I don’t have the ceiling height it is not a good option for me.
@tubee2b7 ай бұрын
Sloping issues? Take a pry bar and pry up the low spot and put spacer underneath. Might consider loosening some bolts, first. Using a level when first setting up is easiest approach.
@DesignBuildLift7 ай бұрын
I tried all that. Have a plastic shim under it now... but still off by a hair. There is very little “slop” between the pin on the flip down safeties and the hole in the uprights (which is a good thing under normal conditions). 🤘
@user-yx1nv7sj4w8 ай бұрын
The following is fairly niche… but if you have a tight space or simply have extra plates to store (eg bumper plates), installing a second set of 16” cross members above the originals is helpful. As opposed to the rear uprights, weight horns in the additional cross members reduce the distance needed from the wall to store large plates. i find this preserves the utility of the rack better than installing horns on the next upright bc that often leads to larger plates interfering with the space used for movements. Just install the second cross member in a location that doesn’t really affect the placement of the safeties if you intend to adjust their height (eg crossmember as low to the ground as feasible - mind the aeres cables running below). It’s worth considering rogue weight horns that are easy to install and/or remove without tools for the extra cross members, just for the added flexibility/convenience. It’s also worth noting the second cross members will not prevent a fixed, solid installation of certain models of safety arms if that’s what you prefer. You can use the same upright and cross member holes to affix the safety arms. Titan’s safety arms work well for this because the hole for the safety peg can be used to secure the arms and the cross members to the upright at the same location. (Don’t get rogue spotter arms because the spacing does not align) If you like, you can install additional gaskets for the holes the cables run through in the second set of 16” cross members, but it’s likely not necessary. Finally, I recommend checking out aperture engineering if you want added protection for other rack attachments 19:21
@DesignBuildLift8 ай бұрын
Aperture Engineering looks pretty cool!
@markhalstead23864 ай бұрын
Multigrip pull up bar also gives better height if using an 80" rack. I like spotter arms with straps above. The straps are squat height. Remove one side of each strap and the spotter arms are bench height.
@DesignBuildLift4 ай бұрын
Agreed! Increases the height for doing pullups. Of course- you can also install it upside down if you don’t have the ceiling clearance if needed. I want to get some straps. Will probably pull that trigger soon! 🤘
@bobw13453 ай бұрын
Thanks!
@DesignBuildLift3 ай бұрын
Thank you so much, Bob! Much appreciated! 🙏
@bobw13453 ай бұрын
My girlfriend sent a message on FB. Thanks again for the best video out there to get through the madness of figuring this all out!
@Eccles_basement_gym9 ай бұрын
Great video. I really like the Ares, cool piece of equipment.
@DesignBuildLift9 ай бұрын
Thank you! I truly love the PR5000 and the Ares!
@user-yg6cq1cx9s9 ай бұрын
Great video as always. How easy is to switch standard logo plate with a compact plate after assembly?
@DesignBuildLift9 ай бұрын
Thank you! 🤘🙏💪It would probably take me about an hour. If I hit my head one more time, I will probably purchase the compact version.
@jeanbiroute3 ай бұрын
Thank you!
@DesignBuildLift3 ай бұрын
You bet!
@cklehman18 ай бұрын
Excellent review! I used this video to build my rack. 1" hole spacing on the PR5000 is critical for upgrades. I also like the rack space analysis to determine appropriate height and depth. Watch this before you buy.
@DesignBuildLift8 ай бұрын
Thank you so much Chris! I love my PR5000 and the Ares! Best purchases ever! 🤘🙏💪
@christophernichols-nv1zp3 ай бұрын
Great review. Is it better to wait for the 2.0 version or buy the 1.0 that’s 20% off? Are the changes that great to wait?
@DesignBuildLift3 ай бұрын
I love my 1.0, but i believe the 2.0 improvements might be worth the wait...then again saving $500 by buying the 1.0 now is pretty awesome too…I don’t know. That’s a toss up!
@jacktyler52415 ай бұрын
This video is incredible. As a potential 80” buyer it answered almost every question I had about the downsides. What’s the total height when including the multi grip? I might have missed that.
@DesignBuildLift5 ай бұрын
Thank you so much! You will not regret this decision. The Top of the multigrip pullup bar (as I have it installed) to the floor is 82” per my tape measure.
@esivs3Ай бұрын
Great video, best breakdown I have seen! My ceilings are 87.5".. so will need to do 80" uprights. Was debating multi-grip pull up bar (adds 2" height) vs straight bar (sits 2-3" under the upright).. do you have clearance? How high are your ceilings? If I invert the multi-grip, may sit too low on 80" upright and hit my head! Thoughts?
@DesignBuildLiftАй бұрын
Thank you, Eric! I really appreciate it! The top of the multi grip bar is 81.75" from the floor (per my tape measure). That leaves you only 5.75" for your head to peak above the bar before your head hits your ceiling. I personally don't think that is enough room (unless you have a tiny head like Beetlejuice). If you flip the bar upside down it COULD work if you are a short person. If you are not short - I would skip the Multi-Grip bar and go with one of the straight pull up bars. This should give you enough clearance for your head.
@esivs3Ай бұрын
@@DesignBuildLift can you get an OK stretch doing the lat pulldown with the 80" rack Ares?
@deputydog52612 ай бұрын
Very very helpful video. Is that the 30” or 41”? Would you please give the floor footprint dimensions without factoring in the cable pull area needed just the metal footprint please and maybe the width of your space that it is setting in. No one should buy one of these without watching your video first.
@DesignBuildLift2 ай бұрын
I have the 30”+16” Configuration In total: a 11.5”Gap between the upright and the wall + 3” for the rear upright + 16” cross member + 3” for middle uprights + 30” cross member + 3” front uprights. That adds up to a total depth of 66.5”. Width per the website of a PR5000 is 50.8 wide (as measured between the edges of the feet of the uprights). The Ares handles add about another 5” on each side. Right now this portion of my basement is not accessible for me to measure (I am in the middle of a basement gym remodel). I will be able to access it again in about a week. When it is accessible again, I will remeasure and let you know. 🤘🙏💪
@deputydog52612 ай бұрын
@@DesignBuildLift Thank you very much.
@TheRealSheHulk18 ай бұрын
I think I would have done different safeties and/or just used the spotter arms. But when building everything I think it makes you pick a safety. I also would have prob selected the more compact logo. I thought the bigger one would be best to “hold” the lat down bar though. I’m now debating if I should move forward with the utility seat purchase…
@DesignBuildLift8 ай бұрын
Well if you ever consider making your own Utility seat consider this: 🤘🙏💪 kzfaq.info/get/bejne/rq5pg66Ul7y7YHU.html
@Kennysvgp094 ай бұрын
Amazing video! When I get one I’ll for sure use your affiliate. Quick question, does the Multi grip bar add any height to the 80”?
@DesignBuildLift4 ай бұрын
Thank you so much! You will not regret this decision. The multigrip pullup bar does add height. The Top of the multigrip pullup bar (as I have it installed) to the floor is 82” per my tape measure. 🤘💪🙏
@Kennysvgp094 ай бұрын
@@DesignBuildLift Thank you! Will the affiliate work for when the 2.0 comes out?
@DesignBuildLift4 ай бұрын
Absolutely!!! Thank you Kenny!!!!
@NoFate2479 ай бұрын
Hard to beat
@DesignBuildLift9 ай бұрын
Love it!
@swordphoenix6 ай бұрын
This should be required watching for buying the Ares!
@DesignBuildLift6 ай бұрын
Thank you so much! Tell your friends! 😂
@cam-bot5 ай бұрын
Hey great review! I wanted to ask how high your ceiling is, I want to do the same build and put it in my garage which has a 100” ceiling. Im also 6ft tall and I was curious about pull ups do you think the 93” uprights are too tall to put in there?
@DesignBuildLift5 ай бұрын
The top of the multi-grip pull-up bar to my ceiling is 8.5”, and that it cutting it close (my head fits when doing pullups - but barely). But you are still good to go if…..you install the multi- grip pull-up bar upside down ( many people to this to get more clearance). Please let me know if you have any other questions!
@mathieurioux906327 күн бұрын
nice review how does REP Rewards Loyalty Points Program work? how much is a point worth in cash?
@DesignBuildLift27 күн бұрын
FULL details here: bit.ly/DBL-REP-REWARDS But essentially One dollar spent = one point earned. 100pts = $5. Max Points redeemable at checkout: 2,000 Points = or $100 off per transaction.
@Josh011705 ай бұрын
Hello good sir, do you know what the measurement between the tops of the uprights and the tops of the crossmembers are?
@DesignBuildLift5 ай бұрын
I am currently in the process of renovating my basement gym and consequently my rack is inaccessible at the moment. However, this link has a graphic with the measurements you are looking for: bit.ly/48QwZhX
@supra85fit2 ай бұрын
Nice men, is it possible to add a smith machine on the rack?
@DesignBuildLift2 ай бұрын
Great question! With the Ares1.0 probably not. However, with the Ares 2.0 it would be possible to add it to the “middle” uprights of the 6 post rack (I think…maybe) because on the Ares2.0 the weight stack and rear foot plate is set back further.
@sonnysweatman86295 ай бұрын
What do you think about the Elite Pro Fitness FTS2 Power rack XL Fully Loaded with all attachments? It really looks like a great system and has it all. Have you heard of them?
@DesignBuildLift5 ай бұрын
Never heard of them. I just googled it. It looks cool, but it is about the same price as a 6 post Rep Rack with Ares /Athena. At the end of the day, I know that Rep will be around tomorrow to honor their warranty. Rep also has excellent customer service. I can’t say the same for Elite Pro Fitness since I have never heard of them. Also - if you can’t find a lot of legitimate reviews on the product….then you are taking a $5000 gamble. Whereas there are a ton of legitimate reviews of Rep products (from people like me). Having said that if you really want a Smith machine in your rack…then it has one (and my Rep rack doesn’t). Bear in mind that since it has a smith machine…there is very limited space to bench/squat IN the rack (with an untethered barbell). I never liked flat benching or squatting on smith machines. I much prefer a real barbell for those 2 exercises specifically. If you agree, On the FTS2, then you will likely be forced to flat bench/squat only on the front posts since there is seemingly no room to do so IN the rack. My 2 cents: Go with Rep instead.
@sonnysweatman86295 ай бұрын
@@DesignBuildLift Thank you for your response. I really like your setup.
@ScottiPewPew6 ай бұрын
Quick question I hope someone can help me answer - would a Rogue Velocitor fit onto a Rep 5000 rack, given the slight difference in metric and 3x3?
@DesignBuildLift6 ай бұрын
I am interested in finding out the answer to this question also. 🤘🙏💪
@majorgear10213 ай бұрын
How much did the price come to for the ares + rack + accessories? And is the rack wide enough to do good cable crossover exercises for chest and back?
@DesignBuildLift3 ай бұрын
I think it was around $5K for EVERYTHING (in 2023). It is wide enough for a good chest stretch if you take a few steps forward. Is it a true cable crossover? No. But few of us have the space for that. Bottom line: I have zero regrets buying the rack or the Ares. Best gym purchase I ever made! Still love it, and feel very blessed every time I use it.
@chrisa82035 күн бұрын
I don’t think you can skip on the flip down safeties. Looks like a pick is required.
@DesignBuildLift5 күн бұрын
It’s been a while since I purchased….but if the website forces you to pick one of the 3 safeties - I believe you can still remove the item from your cart at checkout
@chrisa82035 күн бұрын
You are correct. Thanks!
@coppersilverandme9 ай бұрын
omg you are the best. I was just thinking to order the ares and not sure if i should pick the 4 or 6 post. but tbh I am worried if i pick 4 post and squat outside the rack. would the it be stable enough and not have the rack fall on me.
@DesignBuildLift9 ай бұрын
Thank you! With the Ares stack…you will have approximately 600 lbs on the back (depending on whether or not you get the stack upgrade). Depending on how much you squat…should be okay on it own, and never tip. 🤘🙏💪
@user-qc7qz9gz2b6 ай бұрын
Just wondering what’s the height of your ceilings ? Thanks for the video.
@DesignBuildLift6 ай бұрын
Bear in mind - and as you probably already know - Most basements slope towards a drain. So the ceiling height will be different depending upon where you measure. In one corner of the basement its 89”… but it’s 90.5” right above where I placed my rack. I say all this to stress that no one should do what I previously did…just measuring in one place and assuming that the ceiling height is the same throughout the room. 🤘🙏💪 Side Note: The ceiling measurements I just gave you are a result of me measuring off the surface of 3/4” thick horse stall mats.
@jeanbiroute3 ай бұрын
Is the spotter arms as safe as the straps if there's a fall?
@DesignBuildLift3 ай бұрын
Technically if you have to bail on a squat - the straps are safer than spotter arms since they provide “full coverage “ from your front uprights to your rear uprights.
@jeanbiroute3 ай бұрын
@@DesignBuildLift thanks a lot. Really helpful video!
@PM-ej7xd8 ай бұрын
Hi!! is the trolley as good without the rollers? the plastic slides well on the rack? Thank you. Philippe. France .
@DesignBuildLift8 ай бұрын
There are no rollers. The trolley has a UHMW plastic lining to make it easily slide without damage to the uprights. You can set it at a desired height using the pop pin and it can be reinforced by using a hitch pins. I love the Ares! Best purchase I ever made for my gym!
@temothee62432 ай бұрын
How much did all of it cost you with shipping and everything
@DesignBuildLift2 ай бұрын
I think was a little over $5k. Free shipping. Plus I got 5000 loyalty points that I used to get a bunch of free/discounted stuff. It’s a lot of money, but this is my “forever “ equipment. No regrets. I absolutely love it. 🤘🙏💪
@memolibir9 ай бұрын
danke für das Video
@DesignBuildLift9 ай бұрын
Thank you, Memoli!!!! I appreciate it!🤘🙏💪
@bradmacklin72659 ай бұрын
What length is the main section of your rack? 30” or 41”? I’m wondering for the spotter arm access you mention with the cable system. I have a PR5000 on 31” center section
@DesignBuildLift9 ай бұрын
30”. The Spotter Arms fits inside nicely. 🤘💪🙏
@bradmacklin72659 ай бұрын
Thanks - liked and subscribed for the helpful info. This is a unique tip I haven’t seen in other videos. I got a label to send my flip down safeties back and I ordered the spotter arms
@tce04236 ай бұрын
Rep rewards expire FYI, just learned that the hard way.
@DesignBuildLift6 ай бұрын
Yes. I think you have one year. Am I right?
@tce04236 ай бұрын
@@DesignBuildLift seems right 😀
@emmanuelmartinez52257 ай бұрын
How tall are your ceilings just out of curiosity? Thank you
@DesignBuildLift7 ай бұрын
Most basements slope towards a drain. So the ceiling height will be different depending upon where you measure. In one corner of the basement its 89”… but it’s 90.5” right above where I placed my rack. I say all this to stress that no one should do what I previously did…just measure in one place and assume that the ceiling height is the same throughout the room. 🤘🙏💪
@DesignBuildLift7 ай бұрын
Oh and by the way I am measuring off of 3/4” horse stall mats .
@biblecharlie7 ай бұрын
So if i heard you right, you want 11.5 inches off the wall to the back side of your post. That gives the ares weights enough room?
@DesignBuildLift7 ай бұрын
No. The Ares weight stack needs no additional room. The stack is contained within the confines of the rack's footprint. The 11.5" inch gap behind the rack was so that you have clearance to comfortably add/remove 45 LBS plates on the Weight Horns on the rear uprights (if you want weight storage on your rear uprights). Bear in mind that most 45 LBS plates are 450mm wide (or 17.7"). SO the radius of the 45 LBS plates are 8.85"..… . Further, the weight horn’s center is 1.5” away from the edge of the upright (the center of a 3” upright). Lastly, you need that extra 2.65" for your hand to grip the plates. Long story short…8.85”+1.5”+2.65”….is a 13” total. So the 11.5" gap provides a 13” clearance .. Thank you for your support!!! 🤟🙏💪
@biblecharlie7 ай бұрын
you must have an engineering background, haha, but thank you much for the clarification. I ordered the weight storage horns so I think I'll just call it 14".@@DesignBuildLift
@DesignBuildLift7 ай бұрын
I edited the math on the comment above to be clearer…the 11.5” gap actually provides a 13” clearance. Thank you!