Replacing inlet and drain valves on Kohler One Piece Toilet Links to my Amazon Affiliate Program: Amazon Shop - www.amazon.com...
Пікірлер: 46
@jaydd734 жыл бұрын
I just did this same install with a genuine replacement Kohler part. IT WAS SOOO DIFFICULT!!! I'm extremely handy. Can build a house. My particular toilet barely can fit this part in. Let alone actually grip it or turn it. The gasket was so tough to compress and the very inconsiderate people that designed this part never thought about the people who'd be installing it so they didn't bother to put any points on it for gripping with your hands, or a wrench, or anything at all for that matter. After 2 hours of getting very frustrated (and after trying lube and soap such for helping) I finally grabbed an oil filter wrench. The type that is all metal and grips like pliers but has the rounded mouth for an automotive oil filter. At first I gripped it but was afraid I was damaging the plastic near where the flapper sits. Finally I gripped the base of the vent area, and was able to twist it slow bits at a time. What a headache!!
@jewymcjewjew99394 жыл бұрын
Same. After great effort, I got it about 85% of the way and then it just stopped. Nothing on Earth is moving that thing any further. Ironically, it looks like the factory-installed valve in this video was also turned incompletely, so uh… What I can say, is that this video makes an extremely difficult task seem trivial, and it’s still a mystery why.
@aaronsrose4 жыл бұрын
Not sure what to say. I changed the valves in all three of my toilets and they all acted the same and have functioned well and not leaked since. Thanks for the comments.
@jewymcjewjew99394 жыл бұрын
@@aaronsrose My only guess is that I did not lube the gasket correctly. For what it's worth, the toilet is operating perfectly, as I would expect for how tight the valve is even at an incomplete turn. Thank you for your video - honestly, the best source of info for this part on the Internet.
@jeffreynelson26603 жыл бұрын
I had the same problem, but solved it: I coated the top and bottom of the gasket with auto axle grease, and installed it by pressing down while turning, and it went right in. No sign of grease in the toilet bowl.
@PSV-bz5zh3 жыл бұрын
J-ME I agree with everything you said. Thank you for these comments. Now I know I’m not the only one! I bought this house five years ago and have yet to be able to get this part installed properly. The second plumber worked on it last week, but it continues to drip into the bowl and refill every half hour. I’m going to try the things you have suggested. It definitely is NOT user friendly
@briansmith89672 жыл бұрын
Thank you for that helpful video. I notice that the instructions just say “remove the flush valve” without telling you that you have to twist it first. My rubber ring was complete goo after 15 years of service.
@OB19742 жыл бұрын
This was so helpful. I couldn’t figure out how to remove that center piece of plastic.
@mogtrader85 ай бұрын
Thanks. I'm thinking of getting a one piece toilet, but worried about the repairs. This doesn't seem too bad. Thank you.
@KevinHenne2 жыл бұрын
I have the Exact same Kohler, your video saved me tons of time by giving me the parts #s and how too, thanks!!!
@EricNielsen187 Жыл бұрын
@ 1:51 "It's a toilet Valve. If you eat that, you deserve it" That took me a couple minutes to stop laughing. Good video.
@johnaversano43044 жыл бұрын
Helpful video. I didn't know that Hunter S. Thompson knew plumbing!
@oppositeworlds14603 жыл бұрын
Thank you for this great video. I had no idea how to change the drain valve, now I do.
@vaman55914 жыл бұрын
I didn't know Ted Kopell was a plumber! Thanks for the video!
@fredy551 Жыл бұрын
As a plumber When he said hmmp who knew, that was my exact thought
@carolinepeyronnard17603 жыл бұрын
The French translation is the most hilarious text I ever read....if this is a Google job, I cannot imagine the damage they make when translating more serious subject matters!!
@g5magic5 жыл бұрын
Wow. How easy you press the flush valve in!!! I noticed mine the old one they used some kind of white silicone between the gasket and the hole. Hmmmm. It worked for many yrs.
@marie-alicelheureux99963 жыл бұрын
Thank you! Appreciated your humor~'
@nancyhoralia3 жыл бұрын
Thank you so much. I have this job ahead of me and I was clueless.
@aaronsrose3 жыл бұрын
Try to use a good compatible oring grease when reinstalling. Some folks have reported having a seriously difficult time twisting the new flapper assembly into place. Thanks!
@Willy90807 Жыл бұрын
Good job
@adamkennedy6071 Жыл бұрын
Well Done!
@avh700 Жыл бұрын
Thanks!
@aaronsrose Жыл бұрын
Thank you!
@Montrealera3 жыл бұрын
I guess nobody read the instructions... it says use dish soap on gasket.
@perryrose8843 Жыл бұрын
I'm having trouble with my canister valve toilets and thinking of converting to the flopper valve type.
@aaronsrose Жыл бұрын
Shouldn't be too bad. Just need to make sure dimensions are correct. There are two versions for those units.
@perryrose8843 Жыл бұрын
@@aaronsrose I just converted to the flopper valve. I found that I had the larger triangular hole version and the smaller gasket version of the flopper valve. It just barely covers the hole but not completely. The right canister version should be here Monday. I ordered it several hours before the flopper but the flopper got here first. Using the "O" ring lube all over the gasket and valve helps a lot. I also learned that lifting the canister a bit makes removing the center stalk much easier.
@leelee71 Жыл бұрын
Wpuld you know how to replace the black gasket under the red flapper?
@JesalBhuta14 жыл бұрын
Aaron. You call out a super secret glue. Can you recommend a product/brand.
@billr36543 жыл бұрын
What did you use to lubricate the seal? Surprised you didn't specify in the video.
@aaronsrose3 жыл бұрын
It's a military spec oring lube I got out of a trash can years ago. Not available to the public. I'd suggest a silicone or light lithium grease. I'd wager a light smear of cooking oil would work as well and then nothing petroleum based would potentially end up in the water system. Thanks!
@raymondsalazar2585 Жыл бұрын
best
@jackpotter36154 жыл бұрын
Thank you!
@leet08094 жыл бұрын
Great video. I had no idea how to disassemble the drain valve from my Kohler one-piece toilet. You just have to twist it! Do you have to use a genuine Kohler part? Isn't there a generic version?
@aaronsrose4 жыл бұрын
Thanks! Given the way they mount I didn't look for alternatives to the OEM parts. In my opinion, the parts weren't terribly expensive in the grand scheme of what the commode cost new so it was easier to get the OEM parts that I knew would fit.
@254JROCK4 жыл бұрын
Ur lucky 🍀 the tabs didn’t break off like mine after i buote the flapper & valve gasket fml
@take5DD4 жыл бұрын
I need the parts numbers. My toilet is similar to this. But I don't know the exact number. can you help?
@aaronsrose4 жыл бұрын
Sure. These are the parts that fit my units: www.amazon.com/dp/B00562D0L8/?ref=exp_aaronrose_dp_vv_d www.amazon.com/dp/B003MH314U/?ref=exp_aaronrose_dp_vv_d The fill valves are important. There are different colors, gray or black. This is the gray one. It may not fit where the black one does, I think. Thanks!
@jeffreyrichardson4 жыл бұрын
Calcium Lime Remover CLR
@timothyj19663 жыл бұрын
THESE Gasket Seals are a HUGE pain in the ass to put in.. You can't compress the Seal enough to get the triangular circle pieces under the tank to rotate tight. VERY FRUSTRATING
@claytonhuff71383 жыл бұрын
Should def know how to do it yourself before trying to show others on KZfaq