Sorry about that. I decided to put some outside to prevent any possible squeaking sounds or rust buildup into the control arm.

Thank you very much! I really appreciate your feedback:)

@@DraftProject Hi. At 18:31, 18:32, 18:33, your new bushing looks deformed! This is the bushing with the 4 parts blue poly, and 1 metal liner, right? Is it just my eyes, or does this bushing have some tensions after reinstall that cause it to become a little misshapen? As a DIYer, I like the ease of poly bush fitment, but am yet to discover how they make the car ride! Also, with poly bushes (and silicone grease), I'd have thought that the need to tighten up the bolts 'with the car on the ground' would have been less important than when using standard bushes. What is your idea on that, please? I enjoyed watching your video, thanks.

​@@joaquinstabbington673 Sorry for the late response. The bushing at 18:31-18:33 was temporarily deformed due to the control arms being held down. It is completely normal and there is nothing to worry about. By the time you put the car back on the ground, the bushing will revert back to its original shape. For me, tightening the bolts with the car on the ground should be applied on both rubber and polyurethane bushings. on rubber bushings, the metal liner is molded into the bushing itself, so you need to tighten the bolts with car on the ground. This will lock the whole bushing (with the metal liner) in one position. Otherwise, when tightened while the car is on the air, it will cause a permanent tension and eventually might break the bushing. on polyurethane bushings, these are separate pieces instead of being molded into one piece which means that the metal liner can somehow adjust itself according to the position or angle of the control arms. But still, I recommend to tighten the bolts with the car on the ground because even though the metal liner is not molded into the bushing, tightening can still lock the metal liner in its bushing. With that in mind, it can cause the bushing to stretch in wrong position since the metal liner cannot move at all. Since it is hard to tighten the bolts while the car is on the ground, I demonstrated there that you can tighten the bolts while the car is on the air by jacking up the front control arm assembly. When you see that the bushings is in its normal position, you can now tighten it all the way. I hope this helps you and please consider subscribing to my channel. Thank you very much for watching.

Thank you very much!

Thank you very much! Take care.

Salamat bro. Soon makakapagupload ako sadyang marami lang biglaan at need asikasuhin. Maraming salamat ulit and cheers!

@@DraftProject Aabangan namen to for sure. 🙌

Maraming salamat po sir!:)

Boss saan shop mo? Puntahan kita kung metro manila area lng. Papagawa ako hyundai i10..

Hi sir pasensya na po cut off na po ako. Hindi na muna po ako tumatanggap ng customer dahil need ko po ng time para sa studies at iba pang importanteng bagay. Taga Cainta, Rizal po pala kami at wala po kaming shop, sa bahay lang po gumagawa. Salamat po sir at ingat po. God bless.

Unfortunately, the car wasn't mine so I could make a video about it. Perhaps in the future if possible. Here are some pros an cons of a polyurethane bushings. Pros: - Chemical resistant - Harder than rubber, but not necessarily mean that it is not comfortable in terms of driving experience. The only thing that might be uncomfortable is the polyurethane engine mount. But for suspension, it is a different story. - Durable compared to rubber and will last more. - Rigidity of the suspension is greatly improved. Thus, driving experience is better. Cons: - Expensive - Absorption of vibration is less compared to rubber due to its compound build and hardness. - In some cases, others have squeaking problems even when they are greased up properly. Thank you very much for your support!!

Cons are squeaking after driving a season, especially if your in the northeast USA. Pros are nice handling. Fix for sqeaking I’d disassemble and clean and lubricate bushing. Look around and you’ll see I’m right son

​@@apesrus6084 so the grease able options are worth a look?

Haven't tried it yet sir. Pero sabi ng iba okay naman po in terms of durability since solid.

Pasensya na po sir, hindi ko po alam since yung owner po ng sasakyan ang bumili niyan. Binili niya po yan online and pinaship po from Australia. Try niyo nalang po icheck yung website ng Superpro suspension parts o kaya check niyo po sa Lazada baka sakaling mayroon na pong authorized reseller po niyan. Maraming salamat po sir sa panonood. Ingat po.

Hi, sorry for the late response. Unfortunately, I do not have access to it since my customer is the one who bought the polyurethane bushings. I'm sorry.

SuperPro

Salamat din po sa pagcomment at panonood po sir, hopefully nakatulong po yung response ko po sainyo. God bless po sir :)

Draft Project masugid mo po akong tagasubaybay sir marami po akong natututunan everytime na mag upload ka po ng video kaso yung sakin honda civic 1995 pero ok lang atleast my natututunan ako maraming salamat po✌🏼

@@jordanfort4294 Huwag po kayong mag alala sir, maguupload po ako ng mga video about sa repairs ng Civic EG soon. Marami lang pong inaasikaso na ibang video sir pero soon po makakapagupload din po ako. Maraming maraming salamat po sir! Sobra ko pong naaappreciate sir. Ingat po and God bless sir!

Hi sir! Make sure po sir na ok po ang ating fuel filter at fuel pump. Since nabanggit niyo po na ok po ang fuel lines, maaring sa electrical problems na po ito. Check niyo po sir lahat ng fuse ng sasakyan. Ayon po sa experience ng nakakarami, may isa pong fuse dyan sa engine bay na ang pangalan ay "BACK UP" at ito po ay 7.5A na nagbibigay signal sa ECU para gumana ang mga fuel injectors at iba pa. Make sure din po sir na maayos ang mga wirings ng fuel injectors at meron itong power supply at ground.

Draft Project thank you very much sir pasensya na po sa abala😞✌🏼

@@jordanfort4294 Walang anuman po sir. Huwag po kayong mahihiyang magtanong at iisipin na makakaabala kayo hehe. Sasagutin ko yan sir sa abot ng aking makakaya. Ang importante sir matulungan ko po kayo sa mga problema niyo po. God bless po at ingat po sir!

Hi bro! Sorry po sa late response. As of now po sir wala po akong video. Pero may ilalagay po ako dito na link na baka sakaling makatulong po sa problema niyo po sa inyong manual window. Maraming salamat po sir! civic-eg.com/forum/viewtopic.php?t=14777 my.prostreetonline.com/2014/04/21/how-to-fix-honda-civic-manual-windows/

@@DraftProject wow.salamat bro...malaking bagay to....salamat☺️

@@SimplengGitarista Walang anuman po sir. Maraming salamat rin po! :>

¡Hola! Los casquillos de poliuretano están destinados a instalarse de esta manera. Estos son más fuertes y duraderos que los de goma. Estos se separan en piezas y se ensamblarán a mano o con prensa hidráulica. No son como casquillos de goma que se construyen como una pieza sólida. ¡Gracias! English Translation: Hello! Polyurethane bushings are meant to be installed this way. These are stronger and durable than rubber ones. These are separated into pieces and will be assembled by hand or hydraulic press. They are not like rubber bushings that are built as a solid piece. Thank you!