Resin Diamond Painting Pen - Full Process, No Buffer

Рет қаралды 1,132

2 жыл бұрын

This is my resin diamond painting pen turning process. My process in finishing does not use a buffer like most turners. There are many ways to go about turning a pen like this, and you may or may not like this method. Even if you do not like my style, hopefully you can pick up something with this full length video, despite the lack of quality due to the zoom and motion. In order to show everything I do, I did not do any time lapse.
Tools/Equipment:
Lathe - Nova Galaxi dvr
Chisels - Asieg tools
Sandpaper - 3M (and other generic brands)
Face shield - Safety Works
Safety Glasses - Milwaukee
Polishes:
Yorkshire Grit Microabrasive Paste
Novus 3 step system
*I am not affiliated with any of the above brands

Пікірлер: 15

@Gem8620 3 ай бұрын

That was awesome,thank you for sharing how genuine you are when you custom design your pens,lovely ❤😊

@lizzedwards5994 2 жыл бұрын

Wow! One of the best tutorials I have found. Very impressed, and I very much enjoyed how in-depth this video is and the pen came out gorgeous. I know from purchasing your pens that they are one of the smoothest, shiniest pens I have, and I have many pens in my collection.

@life.w.lindsay1274 2 жыл бұрын

This was so mesmerizing 😍 B said she needs more of the cats

@lizzedwards5994 2 жыл бұрын

I agree would have loved to see the shop supervisor (the kitty)peek in

@kevinskreations 2 жыл бұрын

Fuzz was around, but must have had other things to do that day. She begs to be held at least once a day, and I'll hold her as I'm going through the sanding/polishing stages. It's an old kitty privilege, not being spoiled I swear 😂

@tim-hypnotherapist Жыл бұрын

Looks like 320/400/10001500/2000/2500/2500/8000/10000 and the NOVUS polishes. Could one just use then NOVUS polishes, skip the sandpaper? Or NOVUS does not remove those large of scratches? Crazy good.

@kevinskreations Жыл бұрын

Thanks! and you are correct in the sandpaper regiment. I do skip the 8,000 and 10,000 occasionally with good results, but the polishes won't get out the initial scratches you usually end up with.

@jaimehebner7516 Ай бұрын

Would a mini lathe be sufficient for making small projects like this beads and other small turning projects I want to get a lathe and since I’ve never even done it before, I thought best to learn on a mini. I don’t wanna get a super cheap one but not super expensive either until I know that I like it and then I’ll graduate to something bigger and better

@kevinskreations 15 күн бұрын

A mini lathe would probably work for this, but just make sure it can handle a drill chuck in the drive side. I'm not too familiar with the minis, but do have a smaller back-up Jet 1221 which also works great. I would probably steer away from a pen making lathe, although it may be able to get the job done, I don't know that they are meant for the load of a diamond painting pen (I could be wrong). I'd personally suggest something similar in size and power to the Rikon 70-105 to start out. That would give plenty of room to work, accept any needed accessories, have the power to turn any small project, and give a little room to grow from pens if you decide.

@Baby_blue_bead_botique 11 ай бұрын

How do you know where to make the indents (for your fingers to hold)

@kevinskreations 11 ай бұрын

There is no set standard, and there are many different grip styles. Unless there is a specific request, I vary the placement depending on the look of the blank. Sometimes I have a different placement on either end because some prefer having a different grip when using different placers. If you diamond paint yourself, take note to where you want to naturally hold the pen. If you do not yourself, check out some videos of people that are diamond painting, and watch their hands. I hope that helps 🙂

@AngelLove1358 Жыл бұрын

Is there a way I can get you to make me a pink and black one with some holographic glitter in it? I’ll pay you!

@kevinskreations Жыл бұрын

Hi Angel! We are set up in Etsy, and we do take custom requests like this. Just to keep all our requests in one place, could you shoot me a message through the Etsy messenger? This is a link to the shop: kevinskreationstore.etsy.com/ My wife does almost all my resin work, so she will work with you to get a blank you like then I'll turn it with any specs you give me.

@AngelLove1358 Жыл бұрын

@@kevinskreations thank you! As soon as I get home from work I will send her a message!