Resiners Product Review-(Are they worth the money?)

  Рет қаралды 617

Resin Me Up

Resin Me Up

Ай бұрын

TUTORIAL DESCRIPTION:
In this tutorial I am reviewing two products from ‪@Resinersofficial‬. Their airless bubble removal machine and their epoxy resin. For this review I decided to use another resin to compare in the machine that was equal in comparison so that it was a fair review. I mixed up 3 oz of each resin, I marked the cups to tell them apart and put them both in the machine and used the 5min timer. then removed the resin from the machine and both had no bubbles except a few surface bubbles. I spritzed them with alcohol and they dissipated. The next test was to use the resin's in a mold, so I added the resin's to my 6 cavity heart mold and marked the mold to separate the resins.
I poured each cavity with the selected resin, added the same alcohol ink and white and swirled them. Let them cure the same amount of time. The Resiners does take longer to cure, which it does state that in the instruction manual because it is a very low viscosity resin. All in all the machine does remove bubbles like it says it does, this would come in handy on the table top versus my big vacuum chamber that is across the room, more convenient. The resin is as described, clear, high gloss and bubble free, it just takes longer to cure. I would recommend these products to fellow resin artists. #resinart #resin
***************************************************************************************
Support my channel by buying me a coffee!!!
buymeacoffee.com/resinmeup
***************************************************************************************
LINKS TO DISCOUNT CODES:
INTO RESIN: 20%-www.intoresin.com/discount/MA...
ISTOYO: 10%-istoyo.com/discount/MARY?ref=...
LET'S RESIN: 10%-letsresin.com/discount/Mary10...
TEEXPERT: MARYKLAUS
RESINERS: ray20
***************************************************************************************
LINKS TO PRODUCTS USED IN THIS VIDEO:
RESIN:
resiners.com/products/resiner...
AIRLESS BUBBLE REMOVER:
resiners.com/products/resiner...

Пікірлер: 19
@jenniferr8195
@jenniferr8195 Ай бұрын
Mary, better late than never and it's always good to hear the review from an artist we trust, even if others have reviewed it already!
@resinmeup
@resinmeup Ай бұрын
You are so right Jennifer as always, thanks for reminding me. 😊🌻❤
@user-nc3vf5fr9b
@user-nc3vf5fr9b Ай бұрын
Oh Sylvia, you sound just like my Gary! I really miss his meows and he was also very persistent too! Thank you for the comparison. I already have the machine, but I may give their resin a try when I order next. Terri
@resinmeup
@resinmeup Ай бұрын
Your welcome Terri❤😊🌻 there is a discount code in the description box if you decide to order. 😊
@carolynfrancis-mclucas6185
@carolynfrancis-mclucas6185 Ай бұрын
Sylvia says, "Why do I get blamed for EVERY hair"? 🥺 She's being very vocal about it. 😆 Feed me Mary (Seymour), feed me all night long.🎶🎵🎶 Thanks for doing this resin comparison and bubbler review. It saves us time and money when we see the products in action. Plus you showed us how the bloom did in Resiners resin. And mentioned, after prep work, that both resins were a good temp for blooms. Thanks again.😊
@resinmeup
@resinmeup Ай бұрын
Your welcome Carolyn🌻😊❤
@pulsetkr45
@pulsetkr45 Ай бұрын
thanks for the comparison....i loved all the hearts...lol...
@resinmeup
@resinmeup Ай бұрын
Your welcome and thank you🌻😊❤
@bonneeley5670
@bonneeley5670 Ай бұрын
What machine do you presently use? And is it the same dimensions as this one? do you always check the temp on your resins before you pour them into you your moulds? And what is the temps you are looking for? And do you use different temps for different types of resin? I am a newbie just watching, trying to figure out what is what. And what to invest in before taking the leap. Thank you for the comparisons.
@resinmeup
@resinmeup Ай бұрын
Bonnie, I have for years used an industrial size vacuum chamber that has a 3 gallon tank and is attached to a pump. If you go out to Amazon and just search vacuum chamber, you will see what I'm referring to. This little machine has everything in one and is way smaller, its more of a desktop size and meant for smaller amounts of resin and lower viscosity resins( lower meaning thinner). I don't ever test the tempature of my resin unless I'm doing blooms, but in this case since it was taking a bit longer with the machine, I wanted to make sure my resin wasn't getting to warm and possibly overheat and cause a flash cure. Does this help?
@caroltweddle9247
@caroltweddle9247 Ай бұрын
❤❤❤
@resinmeup
@resinmeup Ай бұрын
❤😊🌻
@lauriebennett6257
@lauriebennett6257 27 күн бұрын
Mary, my question is, which resin did you use for your white? Was it just one, or did you use the T Expert with the T Expert white and the Resiners with the Resiners white? It looked like you just used one. Could that be why 3 turned out right and 3 dropped into the bottom? Combining resins? Or am I way off base?
@resinmeup
@resinmeup 27 күн бұрын
Laurie, I mixed each their own white.😊
@vonnie4781
@vonnie4781 10 күн бұрын
Is it possible to get the heart mold? Thank you.
@resinmeup
@resinmeup 8 күн бұрын
Vonnie, sorry for the late response, I've been down with the flu. The hearts mold is handmade by me, are you wanting one?
@miriampalmer-golembiewski8483
@miriampalmer-golembiewski8483 Ай бұрын
Where did you get the heart mold from?
@resinmeup
@resinmeup Ай бұрын
Miriam, I made it myself.
@miriampalmer-golembiewski8483
@miriampalmer-golembiewski8483 Ай бұрын
@@resinmeup Wow!! I love those hearts.
Puddle Pour-using mica powders-Did it work? #resinart
20:01
Resin Me Up
Рет қаралды 1,7 М.
#531 Making Terrazzo Keychains + How I Assemble Them!
46:34
Glitz N' Glitter By Michelle
Рет қаралды 5 М.
ТЫ С ДРУГОМ В ДЕТСТВЕ😂#shorts
01:00
BATEK_OFFICIAL
Рет қаралды 7 МЛН
Задержи дыхание дольше всех!
00:42
Аришнев
Рет қаралды 3,8 МЛН
Sometimes you just have to make resin projects fun. #resinfun
23:30
#444 Resin Casting Powder Take II - Redemption???
52:18
Glitz N' Glitter By Michelle
Рет қаралды 6 М.
Fairy 🧚 Flower 🌸  3-5!  1st Kim’s Art Alchemy Video 🎉 #resinart
15:58
271. Hollow 3D RESIN Casts FROM HAIRSPRAY?!!! WHAT?!
26:09
Daniel Cooper
Рет қаралды 132 М.
Watch What Happens When You Add Marbles to Resin - Unbelievable
6:49
Steve McDonald Arts and Crafts
Рет қаралды 231 М.
It worked!
45:25
Michelle McDaniel
Рет қаралды 10 М.
STOP Making These 5 Epoxy Resin Mistakes Right Now
13:26
Steve McDonald Arts and Crafts
Рет қаралды 38 М.
Beach Vibes With This Stunning Conch shell Dish. #resinart
26:50
Resin Me Up
Рет қаралды 1,1 М.
Iridescent Butterfly Wind Chime💜 So Pretty!!💜#resinart
29:41
Resin Me Up
Рет қаралды 1,5 М.