Reviving A Jeweler's Gold Wire Roller

Reviving A Jeweler's Gold Wire Roller | No Talking!

Рет қаралды 143,974

Күн бұрын

#jewelery #restoration #vintagetools
Hey everyone,
Watch the amazing transformation of a vintage gold wire roller in this restoration video. From rust to powder coating, this jewelers tool gets a new life!
Embark on a journey of restoration as I revive a forgotten treasure - a Jeweler's Gold Wire Roller. From disassembly to assembly, each step unfolds, revealing the meticulous process of bringing this vintage story gem back to life.
Experience the satisfaction of witnessing rust and grime vanish, replaced by the gleam of restored metalwork and zinc plated parts. With care and precision, I clean, repair, and revitalize each component, honoring the craftsmanship of the past.
Follow along as I apply powder coating and perform necessary adjustments, ensuring both functionality and longevity.
Join me in celebrating the completion of this restoration project, and witness the satisfying results of hard work and dedication when I end with my Beer Test of a indonesian "Bintang".
Whether you're a restoration enthusiast, a goldsmith or simply curious about the process, this video offers a glimpse into the journey of breathing new life into old treasures.
Best regards,
Dr Beer Restoration
Hey if you want to support me, you can become my patreon or invite me for a virtual beer via
Paypal: paypal.me/NTRBeer
Patreon: / notterriblerestorations
and follow me on Instagram and Facebook
/ ntrprojects
/ ntrprojects
I'm an amazon affiliate and I benefit when you pruchase the tools I use via the links below:
Here are the links to the tools and equipment I use:
xTool P2 Laser Cutter/ Engraver: ➡️ www.xtool.com/?ref=a33AnTM6OT...
IMPLOTEX 3000 Compressor: ➡️amzn.to/40Xp5iK
Powder Coating Gun: ➡️amzn.to/3XEnXhk
Laser Pecker 2 Engraver https: ➡️amzn.to/3EhzLza
Fein Multimaster MM 700: ➡️amzn.to/3Ia7xrg
Bosch Professional Impact Drill GSB 18V-110 C: ➡️amzn.to/3I7Ttyh Sandblasting Cabinet
420 Liter: ➡️amzn.to/3S62o89
350 Liter ➡️amzn.to/3IyPj3V
220 Liter ➡️ amzn.to/3IzYMYE
Kamera - Sony AX53: ➡️amzn.to/3Kif4XB
Grabby "McGrabface" Grabson: ➡️amzn.to/3Z506sc
Music:
Intro:
Elegant Logo by Free Music | / fm_freemusic Music promoted by www.free-stock-music.com Creative Commons Attribution 3.0 Unported License creativecommons.org/licenses/...
Result Scene:
Timeless - Lauren Duski from KZfaq audio library
00:00 - Intro
01:19 - CHAPTER 1: Disassembly
03:54 - CHAPTER 2: Cleaning
07:38 - CHAPTER 3: Metal Works
09:10 - CHAPTER 4: Zinc Plating
09:48 - CHAPTER 5: One More Thing
11:17 - CHAPTER 6: Sandblasting
11:54 - CHAPTER 7: Finishing
12:39 - CHAPTER 8: Powder Coating
13:56 - CHAPTER 9: Paint Job
15:01 - CHAPTER 10: Hardening Gears
16:10 - CHAPTER 11: Assembly
19:02 - CHAPTER 12: Results
20:37 - CHAPTER 13: Beer Test

Пікірлер: 272

@tonicoomesclark 26 күн бұрын

Your parents KNEW you were going to do this restoration justice. Your Dad and Grandma are smiling down on you. 😊

@NTRprojects 26 күн бұрын

Thank you very much. I think so too :)

@mahimanbendesai5024 6 күн бұрын

@@NTRprojects d

@DanielConstantinoS 24 күн бұрын

No long sleeves at the lathe please! We need you safe and sound. ❤

@WishintobeFishin 10 күн бұрын

It will only hurt for a second but yes!

@aybikekolmas9839 25 күн бұрын

I love your videos. For one, it's wonderful content with great camera work and excellent editing! Watching you restore objects is very meditative and calming to me. Like the "good kind of youtube videos" to watch right before going to bed! :D But there is more to it. The old, rusty objects would look like "trash" to most people. Something to get rid off, to throw in the bin. But the way you repair them and make them so beautiful and shiny again.. it's like giving them a second chance, a second life. Somehow, by putting your skill and effort and love in your actions of giving them a second life, you're not only restoring them, but also my faith in humanity. 🙏 What we can achieve, when we don't focus on how old/bad things have become, but how to make things better. Maybe even applying it to relationships of any sort..? Putting this work and commitment into something you love is just so noble. You remind me of the traits I love most about humanity. Thank you and keep doing the work you love ❤

@NTRprojects 25 күн бұрын

It moves me quite a lot, when I see how many effort and nice thoughts and words you find to comment on my video. Thank you very very much for this. ❤️

@Vickie-Bligh 26 күн бұрын

Beautiful restoration, what a tribute to your dad. You did your parents proud. Congratulations on hitting the big 100K subscribers. You really deserve it. You have wonderful skills and talents for restoring, your filming and editing are spot on. I'm always excited to see a new posting by you, Doc Beer. Thanks for sharing this lovely piece of history.

@jsidorable 26 күн бұрын

A fine "Homage to Dad".....bravo

@NTRprojects 26 күн бұрын

Thank you

@jasonarthur1208 26 күн бұрын

Well done Dr. B. Awesome job.

@NTRprojects 26 күн бұрын

Thanks Jason

@pigsydney 26 күн бұрын

I always enjoy your restorations,I can hardly wait for the next video.Bless your parents for giving this to you.

@Climowitz 3 күн бұрын

I love this kind of videos and with yours it felt like i was also learning something, so keep the good job, and keep on talking about the processes, don't be afraid to be repetitive or technical. I love learning about restorations.

@ktl711 26 күн бұрын

Congratulations on achieving the subscriber milestone, and thank you for another beautifully edited and satisfying restoration! It's very meaningful that you will now be able to keep this reminder of your dad (and mom!) in your workshop, and it's exciting to know that it's already going to play a role in your next video! Very much looking forward to it!

@oneshotme 19 күн бұрын

Glad you saved it out of the yard and restored it!! It deserves it!!

@iseespots6014 26 күн бұрын

Can't wait till the next project, but also love how this roller came out!!!!

@NowInAus 22 күн бұрын

Lovely job. Your dad’s gift was perfect

@namngothe2060 25 күн бұрын

Your work is wonderful. Good effort and great skills. Your dad and grandma are smiling at you.

@billakosl.a3227 18 күн бұрын

Perfect restore

@georgebrown8312 26 күн бұрын

Wonderful job you did restoring the gold wire roller. It looks much better and it works like a charm too. I bet your grandpa would be proud of you.

@michaelcaprio5269 26 күн бұрын

A sublime restoration

@Aanjaneyapandey-wj7jm 26 күн бұрын

you made your ancestors proud my man!!

@rosemorrison7075 26 күн бұрын

A beautiful restoration! And something special from your Dad.

@NTRprojects 26 күн бұрын

Absolutely. Have a great day

@meninoandrade9833 25 күн бұрын

This is called professional restoration 👍💯👍 the best one

@Faesharlyn 24 күн бұрын

So happy or you! This is a gorgeous resto, i cant wait to see the ingots you send through!

@jamesriordan3494 26 күн бұрын

Gut gemacht 🙌

@dondalrymple5794 26 күн бұрын

Well done! Always a pleasure to watch. Can’t wait for the next video.

@mediumstudio 23 күн бұрын

Great colors

@xtender5 22 күн бұрын

Congrats! Very well deserved!

@MissLady-pq4hc 11 күн бұрын

Nice job.👍🏼

@rtyrsson 4 күн бұрын

Congratulations on the 100,000 subscriber plaque! I found this episode enlightening. I've always wondered how goldsmiths and silversmiths narrowed wire and this machine speaks for itself.

@piparalegal2019 24 күн бұрын

What an awesome tool for you to restore. Your parents must have known how much you would enjoy restoring and using it! I know I enjoyed watching the restoration process. I undergo infusions to treat my chronic pain, so before I even *watched* this video, it got added to my "Infusions" playlist. There's just something so relaxing about watching someone talented restore tools that I've never used and put them to use! Great work, as always, and congratulations on the Silver Play Button!

@BB_Chaptsick 25 күн бұрын

Great restoration! Very well put together project. And, congratulations! See you on the next project.

@terrystrife4198 23 күн бұрын

Satisfying!

@90762709 26 күн бұрын

I really like the “CC” narrative!

@NTRprojects 26 күн бұрын

Glad to hear that you liked

@patrix5614 26 күн бұрын

Beautiful work as always. Keep up the good work. HOWEVER, i MISSED the Beer Tasting !!!.

@NTRprojects 26 күн бұрын

It is there! You might have turned off too quickly

@eviesoap2655 25 күн бұрын

So nice to see you! My hubby and I love your videos! ❤❤

@adamweilergurarye5422 21 күн бұрын

Bravo!

@HexenzirkelZuluhed 26 күн бұрын

Congratulations!

@NTRprojects 26 күн бұрын

Thank you

@colfergusson4242 25 күн бұрын

Lovely resto, then a lovely beer 🍻

@mangamaniaciam 21 күн бұрын

What a simply gorgeous restoration!!😎

@NTRprojects 21 күн бұрын

Glad you liked it

@larrykelly2838 26 күн бұрын

Nice restoration

@bharatshah5862 23 күн бұрын

LOOKS GOOD A JOB WEL; DONE

@CharlesBedwell-sn3wr 20 күн бұрын

I love the chapter 13. I’m indulging in chapter 13 now for a couple of hours. Love me some I-10 Intuition. Local made and local drank. Raise a craft for a toast.

@jimjasper9851 23 күн бұрын

Proper job mate🦘🇦🇺👍🏼

@vinceianni4026 25 күн бұрын

Hello mister beautiful restoration beautifully restored well done

@persioboni9373 26 күн бұрын

Excelente !

@theskyehiker 25 күн бұрын

Quite a nice rolling mill. You can work any non ferrous metal besides gold. Silver, copper, etc. great job.

@kendrahoffman7949 20 күн бұрын

Whenever I see rivets, I am sad for them, because they did their jobs so well, but they have to be removed. But then whenever I see frozen screws and bolts, I am happy for them, because I know they're going to feel so much more comfortable once they've been cleaned up!

@NTRprojects 20 күн бұрын

😅😅😅

@NTRprojects 20 күн бұрын

Hope I don't go all sentimental on rivets in the future

@Scribe3168 18 күн бұрын

I get ya!

@atuned85 26 күн бұрын

Nice!

@PD-be7ln 24 күн бұрын

It’s been great watching you improve your skills (and tools!) over time. You’re an inspiration. But I do so miss the beer.

@giant-34rus 25 күн бұрын

Отличное восстановление интересного станка ! Удачи в дальнейшем !👍

@gndvl 17 күн бұрын

Wow The beer is from my country.. glad to see that! Hope you like it..

@Longing4theWoods 26 күн бұрын

Incredible.

@NTRprojects 26 күн бұрын

Thank you

@Michael-ul8bv 26 күн бұрын

Very nice did a good job

@adnacraigo6590 26 күн бұрын

Very nice.

@ArtemisToo 25 күн бұрын

Taking up goldsmithing, eh? Well, whatever you do with it, it's beautiful -- you did it and your Dad proud!

@NTRprojects 25 күн бұрын

Thank you Artemis

@tfatcher 25 күн бұрын

Trouble removing the gear shaft? You are NOT an idiot. You give me hope when that kind of thing happens to a young person! 😀

@WinchesterxNL 26 күн бұрын

No talking? Okay I promise I'll be silent while watching the video ❤

@NTRprojects 26 күн бұрын

You better be, please pay attention 😂

@Gonyos 26 күн бұрын

Well done, sir. A very satisfying video and great finish.

@marshallswanson696 24 күн бұрын

Thanks again for the killer video.

@ukpatriot 26 күн бұрын

Another piece of history restored absolutely excellent work that you do.

@NTRprojects 26 күн бұрын

Thanks and best regards to the UK

@DrHutOfHandcraft 24 күн бұрын

First of: Congratulations again for passing the 100k ! Can’t wait to see this tool in your next video, really curious for that. ✌🏻

@f75gunslinger 22 күн бұрын

I've seen many knife makers use a forge with a steel tube ( usually square tube for more room ) in heat treating . That will give you a more even heat across your parts instead of having the hot spots under the burners .

@omarkhan9966 24 күн бұрын

Bravo on the camera work.

@pfadiva 25 күн бұрын

Excellent resto! I like the as-cast finish you allowed to remain. Next project is something for your lady, maybe? Congrats on the 100K!

@sadielouwho5795 25 күн бұрын

Wonderful job, as always. Bittersweet feeling, though. 😢

@foxwhiskey 25 күн бұрын

A pleasure to watch. As always ! Regards and greetings.😊

@NTRprojects 25 күн бұрын

Thank you

@robinaroundtown...2194 14 күн бұрын

Beautiful job... Looks like you already had a little beer 🍺 in that glass from a first one...lolol 🤣🤣🤣🤣 Always love your videos especially when the parts walk themselves around...lolol 🤣🤣🤣🤣 I've been a cameraman in Hollywood for over 40 years now and used to do stop motion... ALOT of work...but ALOT of fun when it's done... But i enjoy watching your's and others videos on KZfaq right now because I'm going through cancer... But I'll get better and get back to work at some point... Good job mate...

@NTRprojects 14 күн бұрын

I wish you a fast and full recovery!!!

@DarrenFuller 22 күн бұрын

Just found (and subscribed to) your channel and blitzed your videos. It’s been chaotic here and they’ve provided a moment of relaxing travel for me, so thank you. Plus your restorations look incredible, and I’m definitely here for the beer ratings

@NTRprojects 21 күн бұрын

Thank you very much, hope everything calms down for you soon

@tedpreston4155 25 күн бұрын

Wow, after seeing the condition of that rolling mill at the beginning makes me feel much better about mine! It's "modern," but really not very different in its construction. May you get as many years of use out of it as I have mine! (I think we're going on about 30 years!) It's a wonderful tool for recycling scraps!

@Mikey__Mike 24 күн бұрын

Congratulations on 100k! Loved the video, I always do :)

@condar419 25 күн бұрын

Great job. I'm so sorry about the loss of your father.

@oneshotme 19 күн бұрын

BIG congrats on your 100k Play Button!!!!!

@user-iv1pl9nl7e 17 күн бұрын

Good 👍

@royreese993 23 күн бұрын

You are a Master at your craft, Great Video, Keep them Coming, From Ocala Florida, USA

@NTRprojects 21 күн бұрын

Thank you

@d1gardner 25 күн бұрын

WOW!

@garymucher4082 25 күн бұрын

Nice refurbishing job. While I have no idea what it truly is or even how it is used, it looks good all the same... Thumbs Up!

@NTRprojects 25 күн бұрын

You will see in my next video how it works

@erictoddw 23 күн бұрын

Great work! You were missed.

@NTRprojects 23 күн бұрын

Thank you Eric

@rankoldbeast3479 25 күн бұрын

Good to have you back, buddy

@NTRprojects 25 күн бұрын

Thank you

@gymnosophist7471 26 күн бұрын

Nice one Doktor! I’m sure your dad would be proud.

@NTRprojects 26 күн бұрын

Thank you

@PetermusPrime 25 күн бұрын

Congrats on the 100k milestone. You do excellent work and it's been a pleasure to watch your work get better and better over time.

@NTRprojects 25 күн бұрын

Thanks for sticking with me on this journey

@andrzejporeda7281 9 күн бұрын

Super jest odrestaurowane ta maszynka do robienia makaronu Pozdrawiam serdecznie.

@ulrichkuster9069 26 күн бұрын

Hallo Lukas, ein super Video und ein fantastisches Ergebnis! Dein Eltern wussten schon, weshalb Du es bekommen solltest 😊💪🏻 Ich freue mich auf`s testen 🍺 Gruß Ulli

@NTRprojects 26 күн бұрын

Ich hoffe du hast den Gruß gesehen. Danke nochmal für die Spende

@ulrichkuster9069 26 күн бұрын

@@NTRprojects Ich danke Dir! Mal schauen, was wir für Dich noch machen können

@BuffaloBillsSon 22 күн бұрын

I just watched this and I subscribed at the end! Keep this quality up and your have yourself a regular viewer!

@NTRprojects 21 күн бұрын

There are many projects waiting for you

@dannraff 25 күн бұрын

Been a while but good to see you back .

@NTRprojects 25 күн бұрын

Yeah I had to organize some stuff

@einufo 26 күн бұрын

Ich find's super, dass Guss nach dem Pulvern noch aussieht wie Guss! Bin auf das Projekt gespannt, wo Draht gewalzt wird . . Gruß Tino PS: Tolles Geschenk von Deinen Eltern und ganz tolle Arbeit von Dir wieder! I think it's great that casting still looks like casting after powdering! I'm looking forward to the project where wire is rolled. . Greetings Tino PS: Great gift from your parents and great work from you again!

@NTRprojects 26 күн бұрын

Danke fürs Feedback Tino

@Dorelaxen 24 күн бұрын

Damn fine work. I'll raise an Optimator to your health and success!

@mftmachining 25 күн бұрын

Klasse Arbeit. Als ich im Museum gearbeitet hab, hatten wir in der Metallrestauration auch das gleiche Stück. Gratulation zu 100k Subscribers...hast du dir mehr als verdient.

@juless-pw1oj 25 күн бұрын

Tachechen Herr Bier und Gratulation zu 100k Ich hab jedes Deiner Videos seit Deiner Vorstellung in der lafamilia Gruppe gesehen und geliked. Grüße Julian

@NTRprojects 25 күн бұрын

Hahaha danke Julian, erinnere mich gar nicht mehr dran die da geteilt zu haben

@juless-pw1oj 25 күн бұрын

War sowas wie "hab 100% Corona-Kurzarbeit und mir ist langweilig...hab KZfaq angefangen " 😅

@Jadegreif 26 күн бұрын

Grats on the 100k!

@NTRprojects 26 күн бұрын

Thank you very much

@lidiasilvestrin4319 13 күн бұрын

mesmo um genio como voce pode cometer erros!!! Imagina os quw não sabem nada!!!!

@churlepatakha 23 күн бұрын

You deserved 2 beer!

@Ale.K7 26 күн бұрын

Congratulations on 100K! :-)

@danajetton4704 26 күн бұрын

Hi, Not sure if the Red, White, Black was intended, if so very clever. Congratulations on your Milestone. Lovely work as usual. Jealous of all of your equipment.

@colleenmccarthy-evans3149 26 күн бұрын

Beautiful tool, I look forward to watching you use it, and congrats on 100K subs! Cheers!

@NTRprojects 26 күн бұрын

Thank you Colleen

@Dirk-Ulowetz 15 күн бұрын

Ich dachte zuerst, soooo alt kann diese Walzmaschine nicht sein, wenn da Passfedern drin sind... Ich begann 1987 mit der Lehre. Und bereits da waren Passfedern normal. Mittlerweile arbeite ich schon viele Jahre im Bereich Maschinenüberholung. Und da sind die ältesten Maschinen, die ich gesehen habe, aus den frühen 50ern. Und auch die hatten bereits Passfedern. Bedeutet dann wohl, dass deine Walzmaschine mindestens bis zu 70 Jahre alt sein kann. Ich vergesse einfach immer wieder mal, wie alt ich mittlerweile bin... 😅 Nebenbei... bei mir am Ort gab es die Firma Dinkel, die Walzmaschinen herstellte. Allerdings mit Elektroantrieb. Während meiner Zeit in der Grundschule hatten wir da mal ne Betriebsbesichtigung. Wenn ich heute darüber nachdenke... Eine Horde aus 20 8-jährigen Kindern wuseln durch die Fabrikhalle... 😂 Waren wohl andere Zeiten damals. Gutes Video. Einer der wenigen Kanälen, die ehrlich restaurieren. Es gibt ja auch Kanäle, wo auch Kunststoffteile "rosten". Hier ist das nicht der Fall. Einfach ehrliche, gute Restaurierungen mit viel Liebe zum Detail. Gefällt mir. Weiter so.

@NTRprojects 15 күн бұрын

Vielen lieben Dank für deine Worte

@user-tq5lu1wp7e 26 күн бұрын

Super Beispiel, wie ein Gerät, dass viele gleich verschrottet hätten wieder in einen perfekten Zustand versetzt wird. Jetzt kann es der nächste Gold und Silberschmied noch lange nutzen.

@NTRprojects 26 күн бұрын

Erstmal nutze ich es im nächsten Video. Ich hoffe du bist dabei

@jonilviv 26 күн бұрын

Nice job! I just can imagine the golden wire diameter of 1 cm :)

@NTRprojects 26 күн бұрын

Well it starts as a thick short piece and gets rolled thinner and thinner. You will see next time

@florianpanko7552 25 күн бұрын

Very nice Work. Would you test the "Altenmünster Bier". Its my favourite

@joelboutier1736 25 күн бұрын

beautiful. I definitely don't blame you for not have gold wire to reel up. thank u

@foks6376 26 күн бұрын

Лайк 👍

@robinblackmoor8732 17 күн бұрын

i think it would have been a nice detail to paint the "safety guard" a different color like yellow or red.

@Itkovan 25 күн бұрын

Congrats on reaching the 100k milestone, well deserved. Lovely result on the wire-roller itself too, i'm glad you didn't do the base in the same color as the roller, it's good to have them visually separate. If i were to be picky about the restoration, then it would have to be to replace the home-made gear-cover with something more in the shape of the rails. But, that's just me, a rando on the internet that like to think i know what i would've tried. Though, i'm guessing you have far too many hours into the restoration and i know that shaping the metal for a new cover and welding it would be a PITA that i'm guessing might not be really worth it.

@NTRprojects 25 күн бұрын

I really appreciate decent feedback, so thank you for the input. I guess I never even thought about it. I was focused on upgrading the existing cover 😊

@EliGadsby 24 күн бұрын

I appreciate the edit, captions, quality of video and restoration. You will blow up soon but not compromising. Quote me in 1 year when you are over 1m subs