Rifle Scope Teardown - - What's inside?

Рет қаралды 72,706

Vince Biano

6 жыл бұрын

Dismantling a 4x32 Center Point Rifle Scope

Пікірлер: 31

@Constitutionallycorrect Жыл бұрын

Thanks for not showing us how you took it apart

@HapPap81 6 жыл бұрын

Thanks for the breakdown. I have a brand new scope with crosshairs that refuse to adjust.

@Redpulsar2011 6 жыл бұрын

Your scope is brocken! Probably why you can't ajust...

@firingrange9674 5 жыл бұрын

Redpulsar2011 no shit its broken!

@cheezgrated 5 жыл бұрын

I was given a free Center Point broken 4x32 scope that was damaged by recoil from a centrefire rifle chambered in 7.62x39. I was able to reseat a locking ring to clear it out of the sight picture, but the crosshairs have snapped. Still usable though. Might put it on for giggles down the line on a pellet gun or on my .22 LR. I have better scopes though.

@mahbooburrahman1602 3 жыл бұрын

How to repair if the cross hairs not moving when you dial the turrets?

@felixv2432 2 жыл бұрын

I have a similar scope that gets water drops inside so l open the objective lens only and clean them but after them back all the ranges power changes l mean l zoom in to zero and turn the objective len its blurry, and if l turn from 50yrds upwards l can't see a thing at all, l don't if that happens to yours after you fix them back

@wongnusabangsa6462 4 жыл бұрын

delft 3x25 scope sn858 .scope dirty. how to refine and clean the lens please make a video on how to disassemble the lens

@commonconservative7551 6 жыл бұрын

that rubber tube makes me think temperature extremes would alter the zeroing

@vincebiano190 6 жыл бұрын

commonconservative ... I tend to agree.

@km6731 4 жыл бұрын

so maybe its not the Powder causing the poi change as much as the scope rubber changing the poi or maybe both.

@fahadsaiyyadhashmi4707 4 жыл бұрын

How to put spring clip inside scop plzz tell me

@amyhazelvang7198 6 жыл бұрын

Great! Now please show us how you took it off and back on

@CottnBudz 6 жыл бұрын

yea pls

@nikolavlahovic815 5 жыл бұрын

kzfaq.info/get/bejne/qqyJktxnmtiylKs.html

@robinjonrusling5136 2 жыл бұрын

Yeah....our lens is so dirty in the inside...would be ao helpful how to dismantle it then put back together

@stevenkatz679 3 жыл бұрын

My buddy and I were going to take apart a scope and I said hold up I'm going check KZfaq , yep , thanks.

@hjohnyjohn8730 6 жыл бұрын

could you please upload the reassembling video, i don't know how to fitting the 'spring clip' please help!

@vincebiano190 6 жыл бұрын

Measure the metal tube to the adjusters and measure the rubber adjusting tube to where the adjusters would hit and put a dab of glue to hold the clip in place so you can slide the rubber inside and be ginger so the clip doesnt break from the glue. If it does you have to start over. It's really a pain.

@snowhiterover 4 жыл бұрын

Do you always use your washer as a workbench?

@Deadbuck73 4 жыл бұрын

snowhiterover probably any port in a storm....

@charlescarlin7058 6 жыл бұрын

How do I loosen the parallax knob on my rifle scope I would a monstrum 3 to 9 by 42 with the adjustable parallax knob on the side and it's so tight I can't turn it and it's even worse when it gets cold give any ideas

@vincebiano190 6 жыл бұрын

Depending on which focal you want to adjust, gotta be real careful not to break the seal. If it's a dial then it might be defective

@cchgn 3 жыл бұрын

Well what about the gas inside? It will fog up from now on.

@francisfrancis4219 6 ай бұрын

How many lenses inside the rubber (erector) tube?

@vincebiano190 6 ай бұрын

One if I remember correctly

@waltersobchak7275 4 жыл бұрын

What did you make the tool out of I'd like to see what it looks like I was using a fuse like 4 a car a but I don't want to scratch the lens so I bailed on that

@vincebiano190 4 жыл бұрын

It's been awhile and I have moved and cant find it. I'm sure you can use a butter knife on it's side , into the groves. It's in there right. Or maybe even a wide chisel that's thin at the end that will fit in the slots.

@waltersobchak7275 4 жыл бұрын

@@vincebiano190 got a shitload of cold chisel somewhere I think I might check it out. At the fattest part about the diameter of a silver dollar. It looks like a nice scope but it's kind of cheap. It says CenterPoint 4 - 16 x 40A0IR I just want to clean the inside of the lens that got condensation in there and it won't come out. I put in a bag of damprid and then I put it in a vacuum desiccator filled with MgSO4 too and it still didn't dry out completely. Been almost a year.