EGR valve replacement fitting on Ford Transit Custom 2.2. same as MK7 Transit
Пікірлер: 54
@davidmehlhorn72611 ай бұрын
Ah the cascading faults issue, fix one, another pops up. I had that happen to me last year when I got a glow plug fault warning that triggered the engine management light. So I replaced the glow plugs (which to be fair had 280,000kms on them). Next day another engine management light which was an exhaust gas temperature sensor. Replaced that (but it was far from easy!!) but then next day, another warning light, this time it was a blocked dpf. So I flushed that with Wynnes dpf cleaner and then the problems were cured. Well for a few weeks or so until a wheel bearing went bad, but I replaced that and then things have settled down….for now at least! Thanks to Jimmy and other KZfaq mechanics, I’ve learned how to do all my own maintenance works which has saved me a fortune, plus I know the repairs have been done correctly. Wish main dealers had the same desire to fix cars properly.
@chipanderson21354 ай бұрын
I have this problem with my transit. The cascading faults are so frustrating. You fix one issue and another pops up. I am now done with this van as my wallet cannot cope with the constant need to replace sensors and valves. I have never had so many issues with a vehicle. This is a proper lemon and I would advise people to steer clear of transits.
@huskiesandlandscapes11724 ай бұрын
@@chipanderson2135I’m not alone in this case… I’m hesitating to burn my transit or fixing it 😅
@SuperRob324 ай бұрын
If you want your car to work well and without problems, REPAIR THE MACHINE YOURSELF. GOOD QUALITY WORK IS ONE THAT IS DONE BY YOURSELF. I repair the car myself and there are no problems with the car.
@beluxauto596811 ай бұрын
Those who say " I have my glow plugs not working for years " are per definition the DPF delete clients so not really our best customers These are the ones that take their car for granted and rather buy the latest smartphone than taking care of the machine that brings them to the shop to buy that. You, as the channel operator, have to be a bit polite with what you say but I will say it for others that think the same as me.
@Geepers252511 ай бұрын
Thanks Jimmy for taking the time and effort to produce these very informative videos. Your one handed dexterity never fails to amaze me it can’t be easy! Great work thank you once again !🙏
@ORileysAutos11 ай бұрын
Many thanks!
@chestermartin23564 ай бұрын
What a man, absolutely no nonsense video and kept me engaged every second. The world is much much better off with people like yourself
@bobr973111 ай бұрын
One happy customer and transit. Great to see the progression of repair process.
@ORileysAutos11 ай бұрын
Thanks
@bazchurchill9832Ай бұрын
Thank you for making this video it was very helpful 👍
@DaBriars10 ай бұрын
Top video as usual Jimmy
@simonmiddleton497711 ай бұрын
Great video Jimmy, I’ve said it before but love the methodical way you explain things as you are doing them. How you video at the same time is a miracle 😃👍
@ORileysAutos11 ай бұрын
Thank you
@s.wilson567511 ай бұрын
Very well explained. Great job.
@chrisdavidson943111 ай бұрын
Great follow up video Jimmy, thanks for sharing.
@ORileysAutos11 ай бұрын
Thanks for watching!
@jasongillis41928 ай бұрын
Thanks! Saved a couple 100 bucks
@stevenkerry310111 ай бұрын
great work Jimmy and i must say doing that with one hand while filming you should be a magician 👍👍😂😂
@ORileysAutos11 ай бұрын
Thanks 👍
@TimmysFavs11 ай бұрын
Another problem sorted Jimmy, great job.
@ORileysAutos11 ай бұрын
Thanks 👍
@TonyHarrison7898910 ай бұрын
Great video, Jimmy. I've watched it a few times now in preparation for doing it on my custom next weekend 😅
@ORileysAutos10 ай бұрын
Good luck!
@TonyHarrison789899 ай бұрын
@ORileysAutos Got it done. The bolt behind the dipstick can f right off though, what a shite location!
@iancoombs432411 ай бұрын
hi jimmy enjoy your channel and contents you now your business keep up the good work
@ORileysAutos11 ай бұрын
Thanks, will do!
@ritchieschofield118511 ай бұрын
Nice job ive done on RWD one and i hate em! They're a horrible job, next time im gonna lower engine to get to it. Glow plug aint fun either. You gotta remove EGR and pull intake manifold to get em out
@damianbarnbrook130510 ай бұрын
I always use some super glue to glue the gasket on first 😉
@cliffthompson299611 ай бұрын
Top MAN 👍👍👍👍
@ORileysAutos11 ай бұрын
Thanks for the visit
@captango11 ай бұрын
If no engine light comes on would the effects of the erg valve cause the vehicle to kick out white bluish smelly smoke upon start up and while driving off it really gets bad and stinks to high heaven . But after about a mile or so it stops smoking.
@sebczajna70011 ай бұрын
Hi, You didnt have option new egr valve position relearn?
@RIPPERTON8 ай бұрын
That EGR valve was the least of your problems. Looking at the way the inside of the EGR discharge nozzle was clogged, thats what the inside of your inlet manifold looks like. There will be a 5mm thick layer of carbon soaked with half burnt engine oil in there. BE SURE to clean the inlet manifold and inlet ports out when you service the glow plugs.
@neildean751511 ай бұрын
Great Video jimmy and thanks for your clear explanations. I’dd be interested in the milage and year of these vehicles..At what milage do you generally see DPF/EGR issues starting
@ORileysAutos11 ай бұрын
I'll try to add that information on next videos
@ENGLISHISBEST11 ай бұрын
Do me a favour, I like watching your video but!. For 9 months I have been watching trying to see if I can sort out my renault megane & warning light check emissions. Yesterday I saw a little text in a random Google piece saying about petrol caps, I got out the car ; slammed the petrol cap & low & behold all my 9 months of stress resolved. Come on give us this type of info too. But your still a good watch.
@SuperRob324 ай бұрын
The problem I had was that the "Hill start" and "ESP" lights came on, but when I did the diagnostics, the computer showed a P042F (EGR) error. I removed the EGP and found that the valve was stuck, but I did not buy a new one, but performed maintenance on the old one. Now everything works as it should.
@jockeywilson3 ай бұрын
Had exactly the same thing happen on mine today, going to take off and clean. How’s yours now?
@SuperRob323 ай бұрын
@@jockeywilson 👍. 👌.The valve was very coked, I had to use some tricks to make it work.
@philbury39854 ай бұрын
Hi Jimmy, my gaffers van has started “juddering” at low revs in all gears, but drives okay otherwise. It has no dashboard fault lights. Is this the engine malfunction caused by a faulty EGR? Thanks.
@heny323111 ай бұрын
Hi, new subscriber and enjoying your expertise. Quick question, I thought glow plugs are utilised during dpf passive regen, am I mistaken? Thanks
@ORileysAutos11 ай бұрын
Yes they are. These Vehicles however use a vaporizer mounted on the exhaust to regen
@heny323111 ай бұрын
@@ORileysAutos thank you for confirmation, really appreciated!
@patrickmullan642911 ай бұрын
You mentioned in one of your videos that you thought the vivaro was the worst van to buy. What van similar in size would you recommend? Thanks
@ORileysAutos11 ай бұрын
Swb crafter? Swb sprinter? Transit custom 2.2?
@georgehiggins310311 ай бұрын
Once the Agr valve is removed is it possible to manually clean it ?
@ORileysAutos11 ай бұрын
Sometimes
@KarlaSanchez-pl5ss11 күн бұрын
Delete dpf by gutting it and pull off rear preasure tube. Unbolt erg servo. Will then go forever.
@jimmydickson885411 ай бұрын
Hey Jimmy which town or city is your base ,old jimmy
@bonvoyage537711 ай бұрын
hes in bedford
@topgear47898 ай бұрын
Cual es el síntoma de que falla la válvula Por qué a mi me da tirones y no me pasa de 2000rpm cuando meto las marchas Además cuando si consigo que suba de vueltas Me hecha mucho humo negro Gracias de antemano
@alex16dark8 ай бұрын
Si el humo es blanco en frio y negro en caliente, es muy posible que se un problema de injectores. Tambien puedes probar a cambiar el filtro de aire y comprobar el caudalímetro, una mala mezcla de aire va generar mala combustión, por ende humo negro.
@stevetaffy87805 ай бұрын
Dpf and egr fault. The bane of my life. What a shit design