RIPPING The Supercharged Miata. Is it faster than Nitrous??

No video

RIPPING The Supercharged Miata. Is it faster than Nitrous??

Рет қаралды 16,659

TheCarPassionChannel

Күн бұрын

Пікірлер: 147

@jp2246 Жыл бұрын

3:24 pretty crisp shifts right there

@JulianValentini Жыл бұрын

…or a crowd. 😂

@Nasonix2 Жыл бұрын

😂

@YoungsterJory Жыл бұрын

I can't wait to see this thing with a built head with huge ports and valve springs

@kentworch 11 ай бұрын

Stiffer value springs means higher RPM. I wouldn't be too surprised to see that b6 engine hit 10,000 RPM and survive under full load and boost with the right upgrades. I personally would highly recommend against exceeding 300 - 350 horsepower though with a stock 1.6 L B6 engine as it wasn't meant to handle as much as the 1.8 L BP engines. I personally wouldn't push the BP that hard, but then again, I like cars to last half a million miles or more. These are both very well built engines with a lot of potential that many people overlook.

@charger1911 Жыл бұрын

Them shifts 🔥

@mac1320 Жыл бұрын

Would love to know your preference for mountain cruising between your red and green cars. Loving the creative microphones, glad that brake clean was pointed in the right direction!

@estewar03 11 ай бұрын

I'd be happy with just some uploads of each in the mountains. Honestly the green one is probably more "fun" because you can be on throttle allot more being "under-powered", whereas the red one with 500hp+ would be WAY more physically & mentally demanding/tiring & in my opinion makes for more of a drag car set up.

@kentworch 11 ай бұрын

Not gonna lie, I definitely love Miatas, nice to see what both the BP and b6 engines can do and how they respond to boost. My car actually has the 1.8 liter DOHC BP engine, but I kept it bone stock with no turbo or any kinda boost. It was made in 96, and is still running in 2023 with about half a million miles on it, and no major work aside from maintenance like changing the oil and rubber timing belts. I had to put a new clutch in it at one point, but that was after 300,000 miles. Those are very well built cars and engines, and I'm really glad you have a passion for showing just want those engines are truly capable of. Love everything you do bro.... Keep on keeping on, and God bless you and your cars.❤️❤️

@marcotine5847 Жыл бұрын

Congratulations on the PDK swap!

@TheCarPassionChannel Жыл бұрын

Biggest compliment in the comment section so far 😂

@RemaiHax Жыл бұрын

I have a NB2 1.8 VVT 6spd and I've been questionning myself for a couple of years about what to choose to spice it up. Only the Miata Dad could convince me, and that'll be Rotrex so thx my dear friend :))))

@glenjamindle Жыл бұрын

But how does the gravity on different planets affect these numbers? Is there a way to convert your findings to earths atmosphere?

@endicuddy Жыл бұрын

I will not stand for this false 1.6 slander 😡

@stvnrs Жыл бұрын

Thanks

@TheCarPassionChannel Жыл бұрын

Thank you!

@James-dt7ky Жыл бұрын

88 mph ....just the right speed to go Back to the Future. (if you have a Flux capacitor)

@psychotogen1 Жыл бұрын

Great, thanks a lot! Now all the vendors are gonna be sold out of flux capacitors!

@RobWhittlestone Ай бұрын

Hahahaha! LOVE the microphone!

@FDB77 Жыл бұрын

Europa's most wanted Miata owner back with another video lessgoo

@Cintas1989 Жыл бұрын

Super quality content that had me smiling the whole time 👍👍 green Miata digs well on the street!

@galosengen856 Жыл бұрын

Can you make a short talk on the ATI Superdamper vs the Fluidamper? I was turned away by the lack of ATI mounting on the TDR kit and had never heard of the Fluidamper before your previous vid, seems like a very viable solution. Also the whole TDR intercooler requiring you to cut the hell out of the car, but that one seems easier to custom fab an alternate solution in my opinion.

@YoungsterJory Жыл бұрын

When i grow up I want to be like you

@300zxdriver Жыл бұрын

Want

@Cairo5555 Жыл бұрын

Great sense of humor. Love it :)

@chrisbrookshire861 Жыл бұрын

Requesting canyon run with engine noise plz.

@Binarymein Жыл бұрын

Weird space into = instalike. What kind of upload speeds you getting from Europa? I love that Mustang is the reference point for all things. Any day my NA rolls up on a 4.6 with fake hood vent/chromies/way-too-loud exhaust is a good day.

@StingrayOfficial Жыл бұрын

Thanks man! Hey I forgot what the red car 0-60 was!

@TheCarPassionChannel Жыл бұрын

On the street with street tires I've done a 3.77, at the strip with drag radials my fastest recorded was a 3.3, but I only recorded 2 tries, I think I might be able to get that into the 3.2-3.1 range 😃 I'll be logging more on the next time out!

@ericmarois6960 Жыл бұрын

Thanks. This is important data I intend to use down the road. Great video.

@mastercricket7626 Жыл бұрын

Man is that smooth bro , had to dbl take thought u was flat foot , but nope just quick foot lol ... much respect bro peace and love bro keep it rad stay safe and build on l8z famz

@alxgalarza88 Жыл бұрын

“Or in a crowd” 💀💀💀

@Birb_of_Judge 11 ай бұрын

I really REALLY wanna do this to my 1.6L NA Mainly because it looks/sounds awesome and because its one of the few easy ways to make more power where i live

@yatajoris2857 Жыл бұрын

This centrifugal supercharger performs so much better then a roots style, Minicooper M45 made only 0,5 bar and a Mercedes Kompressor only made 0,3 bar on my friends' cars

@yatajoris2857 Жыл бұрын

Both superchargers also coming from 1.8 and 2.0 litre engines 😬

@VeeTeeSnacks Жыл бұрын

my Mercedes m62 is making 1bar/14psi goes good as feels really punchy from 3.5k and doesn't fall off until over 7000rpm

@ThOrZwAr Жыл бұрын

What size (mm) pulley are you running? Also, those shifts... absolutely fantastic. That's a lot of shifting mating a 6spd to a 4.30

@TheCarPassionChannel Жыл бұрын

Stock sized crank pulley (Fluidampr) which is 130mm, and a 90mm on the Rotrex

@ianwalsh3868 11 ай бұрын

Microphone content is on point

@cloudhidden1196 Жыл бұрын

Thumbs up for the dig at Mustangs at the end. Dad's got jokes.

@markperry8480 11 ай бұрын

You should try a C30-94 with fuel, ignition, fluidampr etc etc with a 3.66 final drive!……..that’s my set up & I love it!

@stangy904 Жыл бұрын

that intro was amazing, great vid

@TheWhiteBruceLee Жыл бұрын

69mph…nice

@dumbestoyster Жыл бұрын

Thanks for coming to dinner and sharing your most recent video, Dad...miss you

@glacypage666 Жыл бұрын

"... or a crowd" Nice.

@benoitvaillancourt3851 Жыл бұрын

I know these make less torque than roots or turbo, but 14psi on stock rods is still safe in you opinion? Great video once again, those mics are hilarious 😂

@ZareefHuq Жыл бұрын

Psi doesn't kill, torque does

@QuincyStick Жыл бұрын

ain't about boost. it's about Torque.

@billyoc225 Жыл бұрын

style points for the mic stand

@jinmannn 11 ай бұрын

Awesome video Greg!

@jdcompton328 Жыл бұрын

Those gear changes are crispy!

@markperry8480 11 ай бұрын

Correction! 3.33 final drive MFactory. An early start & a lonooooong drive today coming home from holiday caused error!

@loganmurray6081 Жыл бұрын

And that boys and girls...is how you shift.

@vilious 11 ай бұрын

Love the 1.6 slander.

@khawajadotd Жыл бұрын

1:30 I love that you only watched half of your own video hahaha

@TheCarPassionChannel Жыл бұрын

Yeah well I watch it about 100 times during editing, I can only take so much 😂

@seymoarsalvage Жыл бұрын

Throw a 50 shot on top. It's fine. Live a little...

@corybohn2013 4 ай бұрын

In my 99, around 3,500rpm acceleration it will hesitate in gear . Think it is the camshaft position sensor? Has new water pump, fuel pump, wires/plugs, egr…

@shirtz69r Жыл бұрын

Thanks dad, appreciate the effort and special effects are on point with this one. How's the wrap holding up? I'm keen to hear. Still undecided to wrap or cheap paint job..

@noncog1 Жыл бұрын

As someone who worked in a shop that did wraps, unless youre doing it yourself, and willing to redo it until youre happy with it, I vote paint

@shirtz69r Жыл бұрын

@@noncog1 Tha ks for that. Paint had alot of steps and places to stuff up too. My first diy paint job was rubbish

@noncog1 Жыл бұрын

@shirtz69r I was thinking you'd have a shop do paint, since it needs a controlled environment For diy, wrap>paint For shop, paint>wrap

@joro8604 Жыл бұрын

Great content! Hilarious too. Well done!

@scottcameron5972 Жыл бұрын

That car sounds so good

@psychopocks Жыл бұрын

oof, that 1.6 hate right in the feels

@garytomaska1133 10 ай бұрын

Now I'm considering one of these kits, thanks a lot. What injectors are you running and how much hp can they handle? Thanks a million!

@TheCarPassionChannel 10 ай бұрын

I had a set of ID 1000's laying around so I used those but they're overkill for the setup. They can handle around 450whp on E85 when combined with the right pump, probably 550+ on gas. 750's would be fine for E85 and 300whp but there's really no downside to just going to the ID1000, Injector Dynamics are great quality

@garytomaska1133 10 ай бұрын

Awesome!

@lindkvistandreas Жыл бұрын

This is very similar to my setup, although right now not running boost.. but '98miata + vvt + 6spd + 4.3-diff but i also modded the diff to have rx7 carrier and a os giken diff.. i can tell you that if you haven't tried the osgiken diff yet.. you reaaaally need to! :D .. awesom video.. thank you for sharing.. i have run eaton sc, turbo .. turbo AND eaton.. but never rotrex.. all have their pro's and cons.. really getting urge to try rotrex now!

@lindkvistandreas Жыл бұрын

and yeah.. if you try the giken.. don't do what i did at first and cheap out on the diff oil.. run the correct one.. or it will be weld-diff-central-skipping everywhere! >D

@bmanjohnson51 Жыл бұрын

Watching you shift that six speed that fast make me want my six speed back! 😩 why did fourth gear have to leave the atmosphere!!??

@SubliminalXtaC Жыл бұрын

"Or a crowd" hahahaha

@cooperturbo4598 Жыл бұрын

Love the mic joke 😂

@psychotogen1 Жыл бұрын

i was waiting for transmission microphone. disappoint! haha

@TheCarPassionChannel Жыл бұрын

Good idea 😂 maybe next video

@benmorgan2621 3 ай бұрын

I'm looking at doing a VVT swap on my nb1 but I cant figure out how to wire up a flat top manifold

@benji431976 11 ай бұрын

Looks quick enough!!! Lovely sounding miata what exhaust is on it ?

@Bassplayermane Жыл бұрын

wait......the moon isnt made of cheese? WISCONSIN YOU LIED!!!

@gremotorsports 11 ай бұрын

Idk those gear might be too short

@Epiphonech Жыл бұрын

I need to understand how to use Draggy while having MS on USB cable and datalogs.

@TheCarPassionChannel Жыл бұрын

The Dragy does not involve the ECU or datalogs, it collects GPS position data at 10Hz and send that info to the Dragy app on your phone via bluetooth.

@raviolitrail Жыл бұрын

3.9 rear-end please

@TheCarPassionChannel Жыл бұрын

I have a Type II 3.9 with an FC housing collecting dust, probably would be a great upgrade to make haha

@GravyBuilt 11 ай бұрын

Would you be interested in doing a K swap on one of your miatas? Are you also in San Diego?

@alternatr Жыл бұрын

My mans is a human DCT

@aradarakjian5 Жыл бұрын

Great video Craigx 😮lol

@noahbergh8708 11 ай бұрын

To what extant high miles worry you on a nb2 engine when you go to boost it. I am split between k swapping and adding forced induction.

@TheCarPassionChannel 11 ай бұрын

I don't worry about it too much. If it's got okay compression and isn't burning excessive oil, I'll add boost! Every engine I've boosted so far has been between 150-180k miles

@DatNinjaGuyD Жыл бұрын

you cant have both, nos and supercharger installed?

@SpitfireZero Жыл бұрын

Grok, you know what you’ll have to do eventually right..? …..green vs red 😈 (red on lower boost settings to match)

@RandomGuyWithaMazda Жыл бұрын

dual creg transmission

@SLYDIT Жыл бұрын

"or a crowd".... 😅😅😅😅😅

@SmBozzy Жыл бұрын

I wondered if you could do me a favour, I have a kit car running the NB engine and wanted to know the width of the Rotrex and bracket from the engine to its furthest measurement. Just to see if it clears my chassis brackets. Thanks 🤘🏻

@cayleependerass 11 ай бұрын

Why is craig granny shifting not double clutching like he should?

@ZareefHuq Жыл бұрын

When's the install video coming?!

@timhuynh6164 Жыл бұрын

Hey awesome video， what seat/bracket set up do you have in your nb? Did you have to modify the seat belt to keep the oem seatbelt? Thanks

@stevesedio1656 Жыл бұрын

You could add nitrous to the Rotrex. Or, install a FFS kit with a 130mm** crank pulley and run nitrous for better than 300WHP. **Maybe bigger, tell Tom at FFS what you have done to your car and see what he recommends..

@yatajoris2857 Жыл бұрын

Rods will look like bananas

@QuincyStick Жыл бұрын

unless he plans to build the engine entirely, that's just gonna nuke the engine. if he wanted that much power he would've just gotten a more capable super charger from the get go

@stevesedio1656 Жыл бұрын

@@QuincyStick He has done 400+WHp engines, so I expect he understand the stock block limits. is using the bigger Rotrex, all he needs to do is change pulleys. But, that doesn't provide the low end that a TVS900. I expect his launch problem is the change in torque over RPM because he chose a centrifugal blower. The TVS eliminates that problem, and the coldside mount has a much smaller plenum which provides better throttle response.

@geezersgal1 11 ай бұрын

What fluid you running in the 6 speed?

@ThatOneGuySometime Жыл бұрын

No, the one more question is “well what if Gapatio sauce gets it’s way into that supercharger?”

@yatajoris2857 Жыл бұрын

Rods go brrrrr

@ThatOneGuySometime Жыл бұрын

@@yatajoris2857 THAT WOULD BE A FUN VIDEO

@ansonta9169 Жыл бұрын

why do you blip the throttle before taking off in first gear? always wondered why people do that because i've seen people drive like that in other videos

@AgapiosUchiha Жыл бұрын

whats the best bolt on mods for a budget n/a 1.6 nb miata

@ricepony33 Жыл бұрын

Suspension, alignment and tires.

@James-dt7ky Жыл бұрын

A hair dryer.

@AgapiosUchiha Жыл бұрын

any performance mods?

@swich69 Жыл бұрын

Mods for what, go fast, better day to day living/dailying. handling mods? my best mods for my 1.6 NA: x5 brass shifter bush. brake master cycler brace Frame rails larger anti-roll/sway bars those are like my contact point of the car from driver to road. best mods regradless of power.

@swich69 Жыл бұрын

@@AgapiosUchiha Turbo

@nickv22 Жыл бұрын

Moon tune!

@shaoyang5650 11 ай бұрын

Bro the moon isn’t made out of cheese? That’s bull shark.

@Riley8425 Жыл бұрын

Hey just FYI your coupon code isn’t working you might want to contact draft about that

@TheCarPassionChannel Жыл бұрын

Ooooops it's actually CARPASSION10 😂 but just following the link in the description will also apply the discount I believe

@jpecc8314 Жыл бұрын

now we get ls miata right

@magicwaffl3z Жыл бұрын

God I wanna rotrex my NB so bad, but california smog makes me worry about having to deal with that every 2 years

@QuincyStick Жыл бұрын

it's not a rotrex, but you could always just get the ffs supercharger kit, it's CARB legal

@HyperspeedMedia Жыл бұрын

what sup with the mic, bro?

@c0c0asauce Жыл бұрын

Have you tried taking off in second gear?

@nucleart0aster Жыл бұрын

Are you running a short final drive? (Say 4.1 or 4.3)? Your 1st to 3rt shifts seem too quick You could gain quite some time by running a the factory nb1 (3.9) dif

@TheCarPassionChannel Жыл бұрын

It's a 4.3 diff and yes it's very short haha

@swich69 Жыл бұрын

the moon is made of cheese

@aaronm2452 Жыл бұрын

And there are no cats in America to set your mind at ease...if you can guess those lyrics you're as old as me😂

@James-dt7ky Жыл бұрын

@@aaronm2452 I was 28 when that movie came out.

@aaronm2452 Жыл бұрын

Lol, good show my friend!!

@swich69 Жыл бұрын

@@aaronm2452 no idea, but google... I wasn't even one when that came out in 1986. Though i feel like i may have seen the movie as a child but dont remember the details

@aaronm2452 Жыл бұрын

When I read your comment that song popped in my head, but I got it wrong. It's the streets are paved with cheese. Still a moment that made me laugh, then I realized time only moves forward and I'm getting old lol!!

@Dude_its_Dan 11 ай бұрын

Hey Greg, I drive an 01 NB with stock suspension and am looking to get a set of SuperMiata Tecna coilovers for dailying to and from school. What do you think about these coilovers and would you recommend them? One thing I am concerned with is not being able to achieve the stance I’d like. I don’t need anything slammed but would like to eliminate most of the wheel gap while having a smooth riding experience.

@TheCarPassionChannel 11 ай бұрын

Unfortunately I don't have any experience with them, but I know they've been on the market for a bit now, so you might want to scour some forums or Facebook groups to see what people think. Might try a set for myself in the future!

@Dude_its_Dan 11 ай бұрын

@@TheCarPassionChannel Thanks for the response, I’ve been scouring the web for a while now but I’ll continue my search for information on Tecnas. Been watching your videos for years. Keep up the great content!