Risun motorbike with CYC X1 Pro (X6)

Рет қаралды 951

Күн бұрын

Test rides of the latest X6 controller from CYC Motor Ltd. Paired with CYC X1 Pro motor and installed on Risun motorbike.
Chapters:
0:00 Introduction
1:02 The bike
1:45 First impressions
4:43 Power settings
6:26 Riding senstations
11:27 Summary

Пікірлер: 23

@ericthemidget9685 Жыл бұрын

Thanks again.

@nobrakes7247 Жыл бұрын

Yes dangerous Need to think about coming off!!! Thanks for the video

@davideoman1000 Жыл бұрын

Man looks like a ton of fun! You'd definitely want a full face helmet when you ride at those speeds. What gear ratio are you running and what size tires? I have a similar frame and was thinking of getting a cyclone motor since it's cheaper, but this seems so much more refined and less of a headache to mount and run.

@LierskogenEbikes Жыл бұрын

Yes, this full face helmet may be a good investment. Regarding gear ratio. I use small 11/53T chainring in the front and 23T at the back. Is this Cyclone motor still on sale? It's very old motor as I remember and actually it's precursor of CYC motors lineup. You could go with Lightning Rods motor as well. I choosed X1 Pro because I wanted PAS with torque sensor for offroad riding. For me good PAS is a must.

@davideoman1000 Жыл бұрын

@@LierskogenEbikes Cyclones are definitely still sold they're used in pedicabs a lot I think. Yeah I was trying to get good PAS through a torque sensing BB and a Grin cycle analyst but I realized it wasn't worth it. CYC is in my future.

@TL1000S97 Жыл бұрын

Where did you purchase the bike? This normally has a rear hub motor I see.. This could be a really nice electric Bike in the "lett MC" class.

@LierskogenEbikes Жыл бұрын

I built it myself. You can't buy it anywhere.

@daddygraysoh9283 2 ай бұрын

hello. idk if youll see this or not but i got a good deal on a full stealth bomber frame with a dnm shock and volcano forks for really cheap i was wanting to know how easy the install was with the motor

@LierskogenEbikes 2 ай бұрын

It's not very complicated. You need to drill 2 holes in frame and install rivet nuts to secure the motor in place.

@daddygraysoh9283 2 ай бұрын

@@LierskogenEbikes man thank you so much i got a deal on the frame with the forks i stated and surron brakes for 300 gbp from a friend and ddint want to take it up without knowing i could use it mid drive.

@daddygraysoh9283 2 ай бұрын

@@LierskogenEbikes could i ask what sizes you used if you remember?

@radtec313 Жыл бұрын

Is the x6 comparable to to the bac2000 cause i want to by the updated controller but want to wait for the x 12

@LierskogenEbikes Жыл бұрын

I never tried BAC2000, so I don't have direct comparison. X6 provides much bigger torque than BAC 855.

@fynnchiboy1060 Жыл бұрын

It is very close. At 52V the x6 feels more powerfull but the bac feels a little bit smoother

@LierskogenEbikes 11 ай бұрын

@@fynnchiboy1060 I have the same experience. Check, if you have the latest drivers for X6 (from march 2023), the previous ones had really awful PAS sensation (almost on/off style).

@fynnchiboy1060 11 ай бұрын

@@LierskogenEbikes i have the newest drivers but the Pedal assist on the bac 2000 Was better (mine died because of water damage) but my topspeed with only the throttle is 75kmh on the x6 on the bac2000 i only got 65kmh. Bac and x6 have 3,3kw Max power with my current battery setup

@LierskogenEbikes 11 ай бұрын

@@fynnchiboy1060 ASI has better PAS sensation than X6. There are much more parameters in ASI controllers for that. However ASI lacks good low end torque (at least for BAC855).

@ataksnajpera Жыл бұрын

6:06 - Co tu nie działa? Ja mam STEALTH GEN1 z tym nowym kontrolerem X6 i u mnie zmiana ustawień działa.

@LierskogenEbikes Жыл бұрын

Okazuje sie, że to mój gówniany telefon nie działa tak jak powinien. 2-3 letni Huawei :). Na nowym Samsungu żony wszystko działa. Czas na zmiane telefonu, hehe.

@ataksnajpera Жыл бұрын

@@LierskogenEbikes Tak czy siak aplikacja jest nadal w fazie ALPHA. WH/km jest liczone z czapy (zaniżone). Chociaż może to wina firmware kontrolera bo na wyświetlaczu również są takie same bzdury. Wkurza mnie że jak chcesz zobaczyć temperatury to musisz ciągle skrolować na osobną stronę. To samo z HUMAN POWER ,który nie mieści się na pierwszej stronie. Typowa chińksa amatorska robota. Ręce opadają. Ilość opcji również jest mniejsza niż w starej aplikacji dla BAC855. NP. nie ma osobnych opcji dla Positive Motor Ramp i Negative Moto Ramp.

@LierskogenEbikes Жыл бұрын

CYC mogłoby dać więcej opcji w tym programie, obecnie wygląda dość ubogo. Przynajmniej reagują na komentarze użytkowników (również te negatywne). Trzeba tylko pamiętać, że zmian nie da zrobić się w miesiąc, więc będzie trzeba troche poczekać na zmiany.