Dude you are so lucky to have a women that has the same interest and hobbies my old laddie just cusses me out for bringing more junk home lol winter is coming from southern Maine great videos .
@AKproXR2 жыл бұрын
Their out there, just gotta find them!
@peterstrayhorn53162 жыл бұрын
I was thinking the same thing. She doesn't mind getting her hands dirty.
@funtyes19702 жыл бұрын
@@AKproXR yeah your women is pretty bad ass . i dont see girls like that where I'm from
@darrellroeters4951 Жыл бұрын
Love savedparts when they get used again.
@brandenzielinski52582 жыл бұрын
I've learned more about how a sled engine works from this guy than any instructional video out there
@Butterstick4202 жыл бұрын
Never seen a track stuck to the hi fax! Love the garage 2 stroke hot box 😤🤣
@rhyno52282 жыл бұрын
Nice work!
@Dwitter2712 жыл бұрын
9:30 no coolant it ran so hot. I can’t believe it tuned the paint black!?!? Woah.
@rammiller51142 жыл бұрын
I won’t part it out man it looks like a nice gen 2 sled
@user-un4mu1hj5o11 ай бұрын
Track was crusty!! Good call with the mallet.
@johnford41862 жыл бұрын
I can't get enough of this content!!
@MZMotor952 жыл бұрын
Right on! I'd keep it as is, and do a stress test on it when snow starts falling :) Been a long summer, cant wait for winter, snowmobiling and your videos rolling out. My guess is coolant leak, lost the coolant, engine overheated which in turn expanded the badly gapped rings and it snagged. So I'd watch out for coolant leaks. Also, you are lucky with your girl. A joy spreader.
@MidnightPolaris8002 жыл бұрын
You should film putting a piston on the rod. I like to see different ways people do installs. who knows, there might be an easier way you do it opposed to how i install them
@tylermartinkus11072 жыл бұрын
I fuckin love all these videos, just want more and more lol
@richardgooden8295 Жыл бұрын
nice 800
@chadkohler7932 жыл бұрын
Finding some good deals in the AK man,. So wish I lived there.
@hkdl87432 жыл бұрын
wondering if you could help I have a Yamaha 700 mount max and it smokes alot wondering if you would have some ideas what would be the cause thanks great video
@dougpullman36992 жыл бұрын
The track looked tight, Amber looked great as always. 😁
@MidnightPolaris8003 ай бұрын
What a simp
@sideshowruest2 жыл бұрын
easy ish fix. wish i lived close id of bought of whole. keep watching your vids and i keep thinking more and more Alaska is the place to be haha maybe someday
@jasonroberts17262 жыл бұрын
Just bought a 01 800 rmk, gonna take er apart tomorrow
@mr.k61362 жыл бұрын
Still gonna send it!!!
@screamdoctor2 ай бұрын
You failed to clean all the metal shavings out of the crankshaft bearings and base of the crankcase.
@radpladdad4652 жыл бұрын
I need to get myself some of those stickers
@Unthawed_Pie2 жыл бұрын
you have that rmk i have a 1998 rmk with a 750 with psi and genisis stuff it makes like 140 to 160 hp so it will a rad sled
@happyindeed63922 жыл бұрын
If the ring land gave out the ring turns and the ends of the ring catch the port. Dont know if that is what happened here. Cause by detonation and heat. I could be wrong.
@jordanhoffman3232 жыл бұрын
also happens if you put the piston in backwards after one to many drinks been there hahahaha
@Unthawed_Pie2 жыл бұрын
what year is that
@MJC101212 жыл бұрын
project wheres the coolant
@hommyy-c54942 жыл бұрын
that a nice little 800 part that thing out and yank it into your old 700 and for your 440 you wanted to swap put a 700 ves in a 440 chassis pretty sure you would fly like a mofo on either one of those
@Dwitter2712 жыл бұрын
0:49 💀😂
@AKproXR2 жыл бұрын
😂😂
@jamesregan63082 жыл бұрын
I have a sled with the same 3021339 cylinders. One cylinder is damaged and I was gonna send it in for repair and replate but then I checked the crank and it doesn't rotate freely. It feels like it has a detent groove that it wants to stay in every 10 or 20 degrees when I spin it. Is that normal? I have a video I can post and link you to. I heard these engines have a lot of crank problems with the cases and bearings
@AKproXR2 жыл бұрын
Crank should spin freely. Could have damaged bearings or material/junk down in the cases. Full tear down & inspection needed
@jamesregan63082 жыл бұрын
Thanks for the response.
@adam319572 жыл бұрын
Build it and rip it
@ethanvids17352 жыл бұрын
This winter can you do some snowmobiling riding clips videos for KZfaq your channel
@AKproXR2 жыл бұрын
I always do. Usually make several riding & racing videos each winter.
@ethanvids17352 жыл бұрын
@@AKproXR ok I was just wondering if you can do snowmobile riding video this winter
@akmotorheads56752 жыл бұрын
I live here on the peninsula and was wondering what you do to get all your snow machines and quads, do you get them all through Facebook or through people
@AKproXR2 жыл бұрын
FB and Craigslist primarily. Otherwise, some people just hit me up because they know I buy stuff
@akmotorheads56752 жыл бұрын
Okay just wondering thanks
@MidnightPolaris8002 жыл бұрын
Why dont you just sell it complete
@AKproXR2 жыл бұрын
Because I bought the sled just for the engine and pipes. Why would I sell them with it, when that’s what I bought it for?
@MidnightPolaris8003 ай бұрын
@@AKproXRsell it complete minus what you want to keep dude 😂
@rmk800assualt72 жыл бұрын
yea first one
@jeffreyhowes73972 жыл бұрын
Bro I wish I lived close to you cause I wouldn't be one of ur "gay" buddies that wouldn't ride with you lol I try to ride as much as I can and last year here in Illinois I put 1500 miles on just on my lakes and then like 400-500 more in the u.p.
@larrywarner93142 жыл бұрын
Track is too tight also
@larrywarner93142 жыл бұрын
Dude just clean it up and hole sale it that's wut I'd do fuck taking all that time to part out , I use to do that then I got all this junk sitting around .
@mightyd-max37172 жыл бұрын
Tracks way to tight
@AKproXR2 жыл бұрын
Did you watch the whole video ?
@Martyvison Жыл бұрын
What would cause the coolant to go back up into the coolant jug and leak out the expansion line after fresh head gaskets and head lid gaskets plus new thermostat ? 2001 600 classic polaris