Roland SPD-SX | Hints & Tips | Set Up For Backing/Click Tracks + Wave Manager

No video

Roland SPD-SX | Hints & Tips | Set Up For Backing/Click Tracks + Wave Manager

Рет қаралды 73,302

Күн бұрын

Please Like ►► Comment ►► & Subscribe to our channel and find us on Instagram @drumwise_drum_tuition
www.DrumWise.co.uk - Kent's Leading Drum Educator
* Sorry about the audio interference. My Mic must have been playing up :-/
Video © 2016 DrumWise
Music © 2014 The Megadudes (Kittiwake Records)

Пікірлер: 24

@LV-xf8oe 8 жыл бұрын

By far one of the best how-to videos for the Roland SPD-SX! Tom is very clear and provides key tips to save you a lot of time. Moreover, these tips will prevent chaos at a live gig! Keep them coming Tom, great job!!

@DrumWiseDrumTuition 8 жыл бұрын

Thanks a lot Lawrence. There are more on the way :-)

@DaleHagger 8 жыл бұрын

Brilliant Tom,many thanks,triggered some song intros at the weekend,time to step it up now.!

@ianginn5172 7 жыл бұрын

Nice one tom 👍just got mine yesterday, spent a few hours and got it sussed now,,,,,,,great piece of kit !

@DrumWiseDrumTuition 7 жыл бұрын

Good stuff :-)

@jl2ification 7 жыл бұрын

PLEASE CUT DOWN THE BACK GROUND MUSIC SO WE CAN HEAR THE INSTRUCTIONS AND THE SAMPLE OR LOOP BETTER... GOOD GRIEF!!!

@DrumWiseDrumTuition 7 жыл бұрын

CAPS LOCK!!!!! Yes, I agree the music is a bit loud but it does come down in volume where the samples are played....

@anderssvendsen4734 8 жыл бұрын

Thanks! That makes sense!

@URKillingme100 7 жыл бұрын

This pad looks great and has way more features than I will ever even think of using. Can you recommend a sample pad that is more basic (if one exists). Thanks!

@DrumWiseDrumTuition 7 жыл бұрын

Hi, Roland have the TM2 module which is a smaller version of this, but you need to use external triggers: www.roland.com/global/products/tm-2/

@URKillingme100 7 жыл бұрын

DrumWise Drum Tuition Thanks. That's actually just the opposite of what I need. I already have a SP-505 sampler and I'd like to buy a multi-pad to trigger it.

@DepressedCapitalist 7 жыл бұрын

Hello! Good video! I have drum samples in 48000hz which are part of a song... i see the roland does not accept 48khz... will the drums change pitch or duration if i trasnform them to 44khz before uploading them to the roland? If so, what do i need to do to have it playing them right? Thanks

@DrumWiseDrumTuition 7 жыл бұрын

Hello, Thanks a lot :) Sadly I'm not sure as this is more of a DAW question. I think when you convert the sample rate when the track is already in the DAW it won't affect the speed/pitch.

@dapdrums 7 жыл бұрын

I think it is weird that you can only PAD LINK two pads together in a Kit. I'd like to PAD LINK 1 and 2; but also PAD link 4 and 5. I like to route PADS 1 and 4 (which have click) to the sub outs and route PADS 2 and 5 (which have just music) to FOH. But, I can't do that as only 1 pad link (of 2 pads) seem to be possible in a single kit. Any thoughts?

@DrumWiseDrumTuition 7 жыл бұрын

Hi Dave, sorry but I've never used the Pad Link function so I'm not able to help on this occasion :-/ Good Luck!!

@anderssvendsen4734 8 жыл бұрын

Nice video man! I only have one question: How did you get the click track to go in your ears and not to the front of house? I know there is a sub out possibility on the spds- sx but it seemed like your click was together with your backing track on the same wave file? And then the audience will here the click, right?

@DrumWiseDrumTuition 8 жыл бұрын

Hi Anders, you have to pan the click in your DAW (such as Logic) to make sure the audience don't hear it. For example, I pan the click hard left, then the backing track that the audience will hear to the right. You then give the sound guy a feed from the right output and either plug your in ears directly into the headphone port of the module, or plug the left output into your onstage mix. I hope that makes sense! :-)

@lloyd007100 8 жыл бұрын

Hey Tom great video and really helpfull, how do you add cues in spd sx and where can i find it, this would be great if you can help me out in this since i play drums for a small church

@DrumWiseDrumTuition 7 жыл бұрын

Hi Lloyd, sorry for the delay in getting back to you. I'm not sure what you mean about cues? Could you explain more please? :-)

@lloyd007100 7 жыл бұрын

DrumWise Drum Tuition I mean drum patches or sample so I can play it live

@soloplayer7787 8 жыл бұрын

how can i install it on a mac pro with the remote disc,I tried to download it but is not the wave manager

@DrumWiseDrumTuition 7 жыл бұрын

Hi, you can download the software from Roland's website: www.roland.co.uk/support/by_product/spd-sx/updates_drivers

@lildrum78 7 жыл бұрын

Just a question apologies if you have answered this in the past, but can you split vocal parts from a track to then add to the SPD-SX? I was looking to add some sample vocals from a track to play along live. Might save having a vocalist!

@DrumWiseDrumTuition 7 жыл бұрын

Hello, yes you can totally do this if you have the stem files. Just make sure you bounce/convert them to a WAV before trying to put them on the SPD :-)