Creating Perfectly Aligned Holes with the Paulk Smart Line Boring Jig

Рет қаралды 41,169

Жыл бұрын

In this video, we'll explore the Paulk Smart Line Boring Jig and demonstrate how it can help you create perfectly aligned holes for your woodworking projects. This innovative tool is designed to save time and improve accuracy, making it a valuable addition to any woodworker's toolbox.
SmartLR32 Plans stores.modularmarket.com/paul...

Пікірлер: 97

@JacksCoolDesigns Жыл бұрын

I saw your previous video and I've been working on a 3d printed version of this jig, it's basically a wider version of the stops that come with the kit (with all of the 9.5, 16 and 32mm offsets) for the larger surface area, extensions that screw onto the stops with a rule, and then stop blocks that screw onto the extensions that reference the board. I'm also incorporating a sawtooth alignment surface between the stops and the extensions so it'll always align exactly to the millimeter

@mcfrmedic Жыл бұрын

I’d be interested in seeing that product as well.😊

@paul9532 Жыл бұрын

That sounds great, would love to see this

@JacksCoolDesigns Жыл бұрын

@@mcfrmedic I'd be happy to share the STLs for it if it's okay with Ron since it's kind of a copy, the one thing I'm puzzling through is how to support the 38mm offsets as well since the KISS system looks intriguing

@rs2343-o4e Жыл бұрын

Oh yes Ron we want the plans.

@jimp3201 Жыл бұрын

Wow, I'm in for the plans. You solved all my hang ups with the L32. Also can you add a section on your tweeks to the 32mm system on your wisdom whys. It's good to learn other perspectives to add to our tool boxes. Jim

@juliet4262 Жыл бұрын

I am new to building cabinets but I like this and the repeatability, I had planned to buy the lr32 but would be very interested in you plans and hope you would do a video showing the final version for both front and back holes so I could follow your hole process

@bmurphy847 Жыл бұрын

I have the LR32 system, but like you, I found the system takes a lot of time to setup and setup and setup. I would really like to see a set of plans. Thanks

@DaveDayCAE Жыл бұрын

I'll order one. Thanks.

@dennisyarbro1657 Жыл бұрын

Yes, nice throughly developed (4 iterations!) plans would be nice. Thanks.

@jamiegreene3609 Жыл бұрын

Yes!!! I have quite a bit of experience with the lr32, this solves the two major flaws. Using a modified 32mm system for inset face frame cabinets (I use the Dave Ler system) Then removing the stop rails. There is a lot of opportunities for them too become out of whack when doing a bigger job. This would be a great product for you to develop with TSO and create a machined aluminum version! Great work 💪

@reddawgrup1779 Жыл бұрын

Yes this!!! 👌

@Mostlypancakes Жыл бұрын

Thumbs up on the Kiss II system and the jig plans!

@TheSmartWoodshop Жыл бұрын

Kiss ll is foolproof!

@stevalty Жыл бұрын

Oh. Heqq. Yes. As always, well developed and well explained. Brilliant.

@TheSmartWoodshop Жыл бұрын

Glad you liked it!

@MrONHcP9 Жыл бұрын

One more "yes" for the plan

@TheSmartWoodshop Жыл бұрын

Done! stores.modularmarket.com/paulk_homes/paulk-smart-lr32-jig-pslrjig-p32.php

@allanwilliams679 Жыл бұрын

Inventive and creative as always Ron. I’ll definitely be looking out for the plans. Thank you for sharing. 👍🏻

@williamfaulkenberry5659 Жыл бұрын

I’m interested in a set of plans.

@jasonandersen5975 Жыл бұрын

👍

@dinamadson5264 Жыл бұрын

Me too on buying plans. Have an lr32, your call outs on limitations are spot on.

@nolandm48 Жыл бұрын

I'm in for the plans Ron.

@evans_workshop Жыл бұрын

Hi Ron, would love to see plans for this!

@roberteckert9699 Жыл бұрын

Count me as interested. I will add this to my Paulk jigs.

@patrickbaum5053 Жыл бұрын

Plans, please! 🍿

@claudemiller5794 Жыл бұрын

Yes, I would be interested in the plans and even more interested in purchasing a finished set

@jerrygreenen9813 Жыл бұрын

Plans please

@BonjourCoco1 Жыл бұрын

Yes please!

@webfarmer9408 Жыл бұрын

Agree regarding the setup woes. Yes on the plan 🙂

@brianoconnor2064 Жыл бұрын

It is also worth mentioning, that in addition to making this system work more efficiently, you would only need to order the LR32 guide plate ($155) and the Festool 5mm bit ($39); instead of the $595 set.

@whitevanman8703 Жыл бұрын

Very useful for USA and European carpenters. These are plans I would buy.

@southwood308 Жыл бұрын

Interested in the plans as well

@markhedquist9597 Жыл бұрын

I'm not a cabinet builder by trade, but I do Ave aspirations of building my own. I really appreciate your hard work in developing innovations.

@jeffberg2010 Жыл бұрын

Yes, this sounds like an improvement on the LR32.

@shawnmurray5452 Жыл бұрын

Yes, yes and yes. Please do a video on the plus 6mm thing that fixes issues I have the LR 32 system and like it very much but likely do not know the issues you alluded to.

@kennethbrooks9818 Жыл бұрын

Excellent thought process. I'm an amateur in the sense that I don't do wood work for a living but I find your excursion enlightening. For my part I do not have the Festool system, so it may be somewhat moot to have your plywood plans, but I find them intriguing.

@genemiller9612 Жыл бұрын

I would be glad to purchase the download.

@thirdworldadv1312 Жыл бұрын

I have the LR32 system and would buy the plans. $5 for that would be the best 5 bucks I've spent in a long time. Thanks.

@samperi2468 Жыл бұрын

yes please

@jeffzanin5503 Жыл бұрын

Great idea, I have the LR32 and have made something much simpler when I was doing 20+ sides. I would buy plans if you make them, this is much nicer than the one I made.

@darbo7 Жыл бұрын

I’d buy those plans. Great stuff!

@kaseystrait4324 Жыл бұрын

Yes make the plans!

@TheMlee5555 Жыл бұрын

Yes for the plans

@WoodenWonders99 10 ай бұрын

Amazing 👌

@johngergel4940 Жыл бұрын

Always enjoy your approach to working smarter. “Yes” on the plans for me too! I have to wonder if TSO is also working on their version… 🤔

@noelpwilliams Жыл бұрын

Most certainly would get the plans. I have the LR32 system but have not used it yet.

@terrysexton276 Жыл бұрын

love it. I’m interested in the plans

@lightweightiseverything5068 Жыл бұрын

I just bought an LR32 track and have not used it yet (need to buy the router). I will buy your plans. I already bought and built your latest-gen Smart Bench. TY!

@Paul-1123- Жыл бұрын

Thank you for educating me on the 32 mm system! I have been wondering about the difference between metric and standard cabinet measurements after watching how Timothy Wilmot built his shop cabinets and used 5mm euroscrews to attach the drawer slides. I am interested in your system, even tho I don't have the Festool track (yet) - wanting to build cabinetry for my shop and for friends - this looks ideal!

@khalftruck3079 Жыл бұрын

Plans sound good.

@TheSmartWoodshop Жыл бұрын

Plans have dropped! stores.modularmarket.com/paulk_homes/paulk-smart-lr32-jig-pslrjig-p32.php

@nickglover Жыл бұрын

I have the LR32 rail and combined it with a ToolCurve adapter for my DeWalt router and found it to be a truly frustrating experience. I'm sure if I was exactly following the "rules" of the system and had a bunch of identical panels to drill it would make sense, but I was fitting a cabinet to a particular space. I didn't even know about the 32 mm system at the time, just made the measurements based on the space available. The panels aren't really deep enough to accommodate the rail, so I had to add additional support just to put the rail on because it's unnecessarily wide for its purpose. I wanted to do a face frame with space on the top and bottom for lighting, so that made it more complicated. It's divided into 3 sections (but all one big unit), so there are two internal dividers that aren't the same height as the two sides (or the same depth because of the back panel), so again I can't just plop the rail on those and have it work. At the end of the day, it wound up being faster, easier, and significantly cheaper to just use a Kreg jig. It's amazing to me that such an expensive setup should only work in very, very specific circumstances, which is that you have to have all panels exactly the same size (no internal dividers), all exactly based on the 32 mm system, and the panels have to be deep enough to accommodate the width of the rail. Your system seems to solve at least some of those problems, which makes it a much better solution overall. Would definitely love to see plans.

@ajkustoms5386 Жыл бұрын

Of course id buy your plans!!!

@TheSmartWoodshop Жыл бұрын

They are in the store now!

@murphyrp01 Жыл бұрын

If I went down the LR 32 path I think it I would go with the Festool system. I have seen Sedgetool do the setup and it seemed easy. Have been more than happy with my smart bench but not so sure that this is a necessity.

@williamburns7075 Жыл бұрын

Definitely interested in the plans

@robertotto2210 Жыл бұрын

I’d be interested in getting a set of plans. Thanks

@brianoconnor2064 Жыл бұрын

yes on the plans

@martykimble9999 Жыл бұрын

I'm surprised you haven't made 2 separate tracks, one for front and one for back?

@timfrazier127 Жыл бұрын

yes to the plans and what is blue square?

@joshruffell6749 Жыл бұрын

Yes please for the plans

@davidluhr Жыл бұрын

Interested in the plans. I'm wondering for large projects if it'd be worth it to make fixed distance versions instead of an adjustable one to ensure that nothing changes during use. The front measure will always remain the same, and then the back measurement will likely be the same across all lowers.

@RobyWanKenobi Жыл бұрын

If you are doing inset doors do you just add the door thickness to the the 37mm for the front holes?

@mcfrmedic Жыл бұрын

Plans please.😊

@vaughnmaurt5013 Жыл бұрын

Yes Ron ! This is awesome ! Thanks

@ptj6412 Жыл бұрын

Post the plans!! I'll buy them :)

@TheSmartWoodshop Жыл бұрын

stores.modularmarket.com/paulk_homes/paulk-smart-lr32-jig-pslrjig-p32.php

@Bulldog532 Жыл бұрын

Yes

@kbucklaew Жыл бұрын

Hey Ron. been watching your videos for quite some time..I bought your plans for trailer buildout. Love it...made a modification on drawer slide which worked well. I was thinking of buying the LR 32 system. Like what you said....just drill all the holes! I would consider buying your upgraded design..... Do you think you could use the LR 32 to make the MFT top?

@razorwired130 Жыл бұрын

I have an LR 32 system and I approve this message 😀. Let us know when the plans are ready!

@TheSmartWoodshop Жыл бұрын

We put up a short earlier today announcing the plans are in the store. They have already proven to be a hit! Tomorrow's video is an 18-minute companion build video. stores.modularmarket.com/paulk_homes/index.php

@tony1653 Жыл бұрын

Yes, I would be interested in plans.

@mc6212 Жыл бұрын

I'd love to have access to the plans! In my case I'd have to work up a conversion to the M18 fuel plunge base and ToolCurve base adapter, can't afford this particular tool yet.

@nialbell8301 Жыл бұрын

I've a LR32 and OF1010 in the van for a year that's never been used 🙈

@robertpearce8394 Жыл бұрын

I have the kit but i have never used it. I was learning how to use it and was setting it but then saw that I needed a 12mm collet. By the time I had got the collet but I have never got to try again.

@magnatimberworksclinthurst6209 Жыл бұрын

Hi Ron I would definitely be interested in your car plans

@trevorhoehn1176 Жыл бұрын

Also interested in the plans 🤙

@SYLTHECRU Жыл бұрын

Will you offer the SVG for those of us with CNC's?

@stigfalck8179 Жыл бұрын

Interested in the plans

@alholston-smith7631 Жыл бұрын

You can put pie down for the plans. Thanks

@tod_with_one_d3055 Жыл бұрын

I'm interested in the plans.

@kevincriswell7533 Жыл бұрын

Sign me up! My investment in the LR 32 system several years ago is just collecting dust. Still not quite sure how your system will work on longer sides, such as bookcases that go to the ceiling.

@TheSmartWoodshop Жыл бұрын

System holes are system holes. It works the same on bases, uppers, pantries, and bookcases. The sides are ALWAYS a multiple of 32 + 6. You will need a longer track or multiple tracks joined, but the position in from the ends never changes.

@JacksCoolDesigns Жыл бұрын

The LR32 manual shows you how to join two LR32 rails together. The outermost holes are about 12mm on center away from the edge of the rail, so there will be a slight gap between the rails. You insert your normal rail connecting bars in the two slots, then you space the rails using the included stop block that attach to the rail, using the side marked 16. Once the rail connectors are tightened, you can remove the stop block to regain access to the 32mm holes where it was attached.

@kawradd1943 Жыл бұрын

Please make a video Remaking the holes of your smartbench with it

@TheSmartWoodshop Жыл бұрын

The Parf guide is the only dependable way to make the MFT top without going with CNC.

@vincentchov5760 Жыл бұрын

What about a CNC-cut router template made of plywood or acrylic? Would that be just as dependable? I imagine the tolerances don't need to be that tight since even a CNC won't be perfect and the wood would move a bit anyway after the bench is made. And standard machining tolerances for metal are within 0.005". Festool doesn't offer any tolerance specifications, even when asked, about their MFT tops. I was told that they don't have any tolerance guarantees on-file when I asked. So I imagine that as long as you can fixture the template securely and index using a few bench dogs and/or dowel pins, you'd be in great shape.

@georgec.rutter2925 Жыл бұрын

Ron , Plans Please !

@andrewbieger5004 Жыл бұрын

Nice setup, Ron. Would this work using the portable DeWalt/ Makita router with the aftermarket adapter for those smaller routers, assuming we already have the LR32 track?

@coolbugfacts1234 10 ай бұрын

You will also need a 3/8" to 8mm collet adapter as well, since the Festool bits are 8mm

@TheBaconAgent212 Жыл бұрын

So does this setup always center out the system holes to sides that aren’t 32mm equal Meaning tops and bottoms for side will not matter I’m very interested in this Thanks Ron

@TheSmartWoodshop Жыл бұрын

I am not sure if I understand you question? The jig creates a balanced panel so there is no top, bottom, right, or left.stores.modularmarket.com/paulk_homes/paulk-smart-lr32-jig-pslrjig-p32.php

@TheBaconAgent212 Жыл бұрын

@@TheSmartWoodshop This is great to always have a balanced panel regardless of panel length thanks that just answered my question

@RobyWanKenobi Жыл бұрын

I bought the plans but the build video is private. The link for the material list works but not the video. Please advise.

@TheSmartWoodshop Жыл бұрын

It was published this morning so now you can view it.