I tried this technique at work this week and I have to say it works great. I was using a similar keyhole-dip method but I was having trouble making it look consistent on the inside. What really helps is walking the whole width of the bevel instead of just the width of your gap. It really helps to make sure your keyhole doesn’t get out of control on you. Thanks for this video!

This is exactly what they should be teaching these kids when they first learn how to weld! Face feeding is key! Especially when taking a weld test! I took a no grinder weld test on a 2” sch. 10 for a uranium enrichment plant and the weld inspector asked fro 1/16 root reinforcement max! You achieve this by face feeding your filler wire! Not back feeding! In a real job scenario when getting your welds are x rayed and your dealing with thin wall pipe or small bore 2” ,1 “ and below you need to always try to face feed and when you can’t face feed grab a smaller filler wire 1/16 and use it to back feed! Awesome video!

Who could not like this...I admire the talent.. this is a true golden arm!! Stack of dimes look damm good!

This is great footage! Please never delete this!

Glad you guys put a new video out. Really talented guys, doing welds not common on KZfaq, super motivating

Glad to see you posting again, thanks.

Great video and love the inspirational words of wisdom, alot of people in the trade forget how to humble themselves to others.

Wow this guy is slick with it!! Great job guys and thanks for the tips you guys are a blessing!!🙏

Finally after months of waiting its all worth it

Great to see a young man welding the way it should be done ... excellent 🇬🇧👍

Been doing a lot of this schedule 10 at several chemical plants here in North Carolina, I'm breaking out as a pipe welder and you guys couldn't have picked a better time to upload this tutorial, it's nice that I can learn a little more than just welding from this channel, thank you guys and be blessed

Amen brother! I didn't know I was coming for some fellowship but thank you just the same, God is good!!

Finally! Awesome video as always

Well done, again! No doubt about it, this is THE best welding channel on KZfaq. I always say it, anyone young needs to be watching you guys, and forget about the long winded circus clowns on the other channels. Cheers, from Australia 🇦🇺👍

Oh man am I glad you guys didn't quit making videos. Been so long I was starting to l lose hope haha

Excelente video Gracias por los Tips Que vivan los welders Saludos desde Chile

Nice root, great technique. Thanks!

From Jamaica watching love your stuff

Always good. Keep them coming 💯💯💯

This dude is SLICK! Well done sir!

I’m a welder. I read Kipling. “If” is great

This technique appeals to me, I was thought No gap feathered bevel and feed little wire on the first pass, downside is you have no idea what the inside is like, so I am going to try this method. Thanks a lot great work

Wow. That was severely impressive. I really struggle with sch 10. My keyhole apparently is not big enough

Excellent Job. Take Care and Stay Safe. Bob

Awesome video man! Especially being an Alloy hand! Another good tip is to Wire brush the heck out of that pipe out of every pass!

How am I just now finding you Boys, but dang sure glad I did.. Subbed !

Beautiful cap, impressive. Up here in the North, Alberta that dude is known as a “Stud” . Good narration on the video as well, good job fellas.

Holy shit!! That is gorgeous

Video never gets old

Great video, much better for me compared to most videos ive watched. Im very happy to see a video gving us a face feed technique, im having too much troubke trying to back feed it just dont work for me. Unless someone has the magic tip dont want to keep at it, especially since you may not always be able to weld it that way if its out of position I like the poem too

Nice job ...but next time hold the camera steady.!!! Also I am trying to watch this great welder..adding the wire and watching his timing...... Nice job welder!!! You guys are great keep the videos and experience videos coming you are helping us tremendously ...plus the products that you sell and and show!! Thanks!!!

Thank you so much for your teach about stainlessteel tig process

That's some fine welding right there 👍

Great video! Just added Kipling's "If" to my funeral service...(whenever that is) ; )

Awesome video. Interesting he feeds wire slightly to from the side.

What gap is used on the fit up and the amps used on pipe?

Looks good 👍

I love your poem

What's up Alabama academy i was missing you guys nice video

Good job !

Do you hold the filler wire on top of the weld on sides so you don’t get undercut or do you keep it in the middle I was getting undercut on the sides a little bit

What amp's would you use for 24" sch 40

So how much purge did you run on this demo ? The outside weld is black. So that would be exceptable in what field ?

Es visti soldadores con excelente eais pero esta lejos la mejor de todas.idolo

Danke für die tollen Videos... Sieht einfach aus.... ich weiß, das es nicht so ist... 👍

Did they fit it up with a 5/32 wire and it shrunk to a 1/8, or did they take it with a 1/8 wire and it’s a tight 1/8 gap…. I just tried this and my bottom was below flush because I felt like I couldn’t push wire because the bevel behind me was a tight 1/8…

Yeah buddy! Slick

I love the poem...

excellent professional

How much gas is being purged in that much of the root open youd loose your purge???

whats the amperage on the cap? 85-90?

Love the vids and the great welding info good job guys. It could use less words of god tho I’m not a religious man but respect and understand your faith I just feel like I’m watching great welding vids and being preached to at the same time if I want to hear that I’ll attend church until then I just want great welding vids.

Thanks I need this type of video

More info about the Kipling plez?

great job my friend. how many amps did you use for the root pass, and what gap did you use????❤

Hey, how many amps and how many litres of argon is in the pipe?

Hello teacher, what separation do you have?

I will try this.

Oh u guys are in mobile, worked at austal for a while, great job

Those words of advice where are they from?

How much argon are you using for purging and welding?

What amps did he run the root at?

Holy shit. Nice!!!

Man that is nice

معلم 👏

Nice

Is he going wall to wall when he dips, like is he doing wall to wall the hole time, or does he pause in the middle of the weld the dip then go wall to wall, or does he feed the wire when he dips and go wall to wall as the wire is being pushed/dipped… also looks like he’s got the wire kinda sideways instead of straight in when he dips

Thank you guys, all of ya!

I wanted to know the cap too was made with 1/8 rod? thank you

nice your ss tig route & penetration 👍good capping pass👌please improve camera

Awesome!!!

This Dude is a Monster #Covid_Season_2021

Scotty, thanks again for the great video and a few words to consider. One question though: what type of lens do you like in your helmet? Your videos are always my first stop, keep them coming! Sparky

🎉❤goud werk

What is the amperage on the root? Did he say, I missed it.

They make good looking welds in the field.

Perfect...!

I’ve always been scared of this one because all I ever learned was face feeding, every time I come across this test the inspector wants it back fed and I end up busting out because it is something I’ve never done consistently so I have trouble with it never tried it like this on stainless but I can stack them in on a aluminum test I guess feeding the wire would be similar just going from a freehand keyhole method I use on aluminum to walking the cup

I don't know who would give this video a thumbs down. 11 jealous welders haha

Back feeding or laying/dipping the rod, is it by preference of welder or welding specifications procedures?

I’m not sure if he mentioned it but make sure you poke some holes on the tape when ur abt to tie in on the root. So the argon doesn’t push the root back out

🔥🔥

Nice!

Sch 10 is how much in milimeters (mm) ?

Amazing.. teach me please

Good shit

Gap is a few miles away ??

Looks like he’s rolling over the filler wire on the cap not dipping,Or is he doing the 1-2-3 dip like the root?

I am on my way my friend

Arc marks? How to stop getting them. How do properly terminate a scratch start TIG rig would be amazing. Or how to fix arc marks.

This method working so well, is there any point feeding through the pipe?

How much purging you given

Super

What amps did you use for the root

❤

I uses a aluminium tape but it didnt work whats that type of tape ? ( sorry for my ugly english)

So no concern with getting sugared tacks?

Or if you want a slick wedding band effect instead of dimes. just keep that wire in the top edge of the puddle with light feeding pressure. Careful with just enough not to let it keyhole, no big deal if it does though. When doing this I will also walk really fast and really tight. When your done with the root pass there will be a noticeable line running down the center of the root on the outside ( sign that it in there ). My go to method. Takes some practice to make shure it breaks down the walls, but once you mastered it you can do it with your eyes closed.

Great bead

Ohhh my damn I love that philosophy saying, I'm all about it! Now bk to welding, damn I needa learn copper nickle, I'ma combo welder of 15yrs, now in norfolk VA, they sure need sum CuNi welders boys, so dang I needa get on sum of that