TIG Welding For Beginners | 3 Proper Steps Every TIG Welder Should Know !

Рет қаралды 158,745

Жыл бұрын

TIG Welding For Beginners, and 3 Proper Steps Every TIG Welder Should Know!
These beginner-friendly steps are about, Joint fit-up and alignment, tacking, purging, and TIG welding open root technique with pipe in position! This video is also about the lay wire or constant feed technique on the root or wiggle motion with the tig torch. Video gives the viewer good insights on how to set up for success, and place good and solid root pass. With the appropriate training and practice on the part of the operator, learning to freehand root can become an invaluable skill!
#tigwelding #tig #extremetig
None of these videos are recorded in a fancy shop surrounded by sponsorship banners!
All of my videos are recorded at working sites in various locations, and in different welding positions.
90% of my welding projects in videos are x-rayed, and if you like to see hands-on projects, welcome!
If you liked this video please give it a thumbs up, share it, subscribe, and click the bell.
It doesn’t cost you anything but massively helps my KZfaq channel. Thank you.
Support this channel with 🔔 Subscribe and 👍 Like!
/ x3mtig

Пікірлер: 125

@JohnDoe-yh6sn Жыл бұрын

Man, you seriously deserve your channel to grow so much more and I hope you will get many more subscribers. I think it takes a lot of efforts and work to film and edit these video, and just welding by itself it’s really hard work, as we all know it. I don’t like many other” famous” channels as they mostly have only fish bait videos with content that isn’t helpful at all! Watching your videos has helped me so much to level up and become a better welder! Thank you so much bro! 🤩🤛🏻

@X3MTIG Жыл бұрын

Thank you very much for your comment and support brother. I am really happy to hear that my video’s are helpful as this is the purpose of this channel. Once again thanks a lot 💪🙏

@fificboi Жыл бұрын

I agree, you’re really good and I’m happy I found your channel!!! Keep doing more videos man some great content! Thank you so much

@X3MTIG Жыл бұрын

@@fificboi thanks brother 🍻👍

@nickolasmills9 Жыл бұрын

I agree. The most helpful videos on KZfaq.

@tamiyathundershot 11 ай бұрын

I just want to say a huge thank you for posting so many excellent pipe welding videos! I really like seeing how you tackle jobs on site. Watching this channel has given me the knowledge and confidence to go for a better job and progress my career. Genuinely life changing! Thank you so much! 👍

@X3MTIG 11 ай бұрын

Thank you very much!

@719angler 11 күн бұрын

Thanks for the video man, lots of really good information here🤙🏼💯

@X3MTIG 8 күн бұрын

Glad it was helpful!

@mikewelder7014 Жыл бұрын

Thanks!

@khalidabouhassan5836 Жыл бұрын

I am super impressed with your skills brother ! Thank you for all you do! Your skills are next level👍🏽🙌🏾

@X3MTIG Жыл бұрын

Thank you brother 🙏I appreciate your support 💪

@blairshiver9672 Жыл бұрын

You make it look so easy. Great video. Keep’em coming! Thanks

@bradm3103 Жыл бұрын

Love your videos bud and I really appreciate how you explain every single move you do. It’s so beneficial for us who are beginners at tig welding. My hat is off to you! 🤛🏻👨🏻‍🏭🥇

@X3MTIG Жыл бұрын

Thanks bud I appreciate your comment 💪

@ziadH7 Жыл бұрын

Thank you so much! I learn a lot with your videos

@anks4343 Жыл бұрын

Phenomenal! Thank you for thorough explanations, it really helps a lot! 🤩

@X3MTIG Жыл бұрын

Thanks, appreciate your comment 👍

@OVERCAPITALIZE Жыл бұрын

Incredible channel. Keep up the work. Love to see welders from outside of the US.

@X3MTIG Жыл бұрын

Thanks bud, I appreciate your comment 👍

@hahnmowermotorsports179 10 ай бұрын

I’m not new to tig welding but I am new to pipe welding. Great video lots of useful info. First couple tig roots I did in pipe had lots of inconsistency and suck back. Gonna keep at it and see if the can get better

@X3MTIG 10 ай бұрын

You gotta burn to learn buddy 👊

@jf7513 Жыл бұрын

Very good explanations! Especially when the gap closes up.

@X3MTIG Жыл бұрын

Thanks brother 👍

@goran5056 Жыл бұрын

Genijalno!!! Hvala puno za pojasnjenje.

@X3MTIG Жыл бұрын

Hvala na komentaru i nema na cemu. 👍

@KazakhKipchak Жыл бұрын

Базар жоқ братан

@Matt-uj6jm Жыл бұрын

Excellent video for beginners Multi coded pipe welder Scotland 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

@X3MTIG Жыл бұрын

Thanks brother, greetings to Scotland 🍻

@johanpotgieter4318 Жыл бұрын

Thank you very much

@mohammadabuhamed3513 Жыл бұрын

You are incredible tig welder indeed. Why are you doing fitting part yourself? Shouldn’t that be job of fitters? You are all in one my man, genius!!!✊🏽👏🏽

@X3MTIG Жыл бұрын

Hey Mo, thanks for your comment brother. I like to do fitting by myself sometimes as I don’t have patience for pipe fitters , they making science fiction out of fit up.😉Just to show them that I can do their job but they can’t do mine.😂

@kevinmioto2248 Жыл бұрын

@@X3MTIG 🤣

@mikewelder7014 Жыл бұрын

Keep it up man, love it! 😎

@melynsegovia1281 10 ай бұрын

❤❤❤ Thank you very much sir for the knowledge

@mrillis9259 Жыл бұрын

This is great keep up the good work!

@26yearoldboomer7 Жыл бұрын

Excellent video thanks for this

@marcelknippers9591 Жыл бұрын

Beautiful Vid from which I took a lot of useful info for myself, especially filling up the gap. Thanks a lot and greetz from Holland, Marcel Knippers😀

@X3MTIG Жыл бұрын

Thanks brother, I’m glad you liked it, cheers to Holland 🍺.

@joeflores5740 4 ай бұрын

Thanks this very helpful

@davorsmiljanic5100 Жыл бұрын

Great video! Amazing welding skills, a very helpful and educational channel, and big thumbs up for your explanations step-by-step. Like it a lot👍

@X3MTIG Жыл бұрын

Thanks brother 💪

@brianbeaubien7371 Жыл бұрын

Good review thank you❤

@bobwferguson Жыл бұрын

Right On

@jesualdogallardo901 Жыл бұрын

Well explained

@diegomendoza7868 11 ай бұрын

Great videos my man we appreciate your work ethic I know sure as hell your boss does !

@X3MTIG 11 ай бұрын

I appreciate that

@nayanbarua9670 Жыл бұрын

Very nice techniques, more tips share please 🙏🙏🙏

@StevenCleven Жыл бұрын

Amazing tutorial man!

@X3MTIG Жыл бұрын

Glad you liked it!😎

@Weldinginlove Жыл бұрын

Very interesting My friend. . Salutttt from WELDER MIG 🇮🇩❤️🔥

@ahmadhajebirooha1667 11 ай бұрын

Goooooooood👍🤘

@gerhardlotter5578 Жыл бұрын

Respect bro.Wow

@RustyGlove9012 Жыл бұрын

You make awesome videos. I wish they were around twenty or so years ago.

@X3MTIG Жыл бұрын

So do I ! 👍

@saddam933 Жыл бұрын

Boss im from india, i like to your video and really you are very good explain every video ,thank you so much

@X3MTIG Жыл бұрын

Thank you my friend 👍

@mddenis1 Жыл бұрын

Thanks, great video! Haven't you tried special soluble rice paper for purging? Maybe can save some time i.e.form small chamber and purge through the gap or drill a small hole to the side from the weld

@X3MTIG Жыл бұрын

Hey bud thanks for your comment. I did weld with that before, and with needle purge as well , but for this particular project, it’s not allowed, I will explain more in my next video.

@Heikin-Ashi-Larry 5 ай бұрын

A purge video would be cool.. show how to determine proper purge..

@dronez9047 Жыл бұрын

Love your vids mate keep it up

@X3MTIG Жыл бұрын

Thanks brother 💪

@ardiebanaga1154 Жыл бұрын

Man this is so good... New subscriber here😊

@travisjones9508 Жыл бұрын

Really nice Mr

@X3MTIG Жыл бұрын

Thanks bud, hope everything is going good for you 🍻

@micmike Жыл бұрын

nice

@user-sk7gj1ht8y Жыл бұрын

Like is that very good welding❤

@abbassadeqpour7327 Жыл бұрын

Please translate Persian🇮🇷 please☹️ you are the master of the blacksmith and I would like to be your student

@roybryan375 7 ай бұрын

hey love your videos im at a combo weldintg school and special alloy, on lift arc when not doing a scratch arc motion when and where / how is it safe to lift arc off the pipe to not get any tungsten inclution / breaking of tungston, should you always lift arc on the side of the bevel and is it ok to be having the tungsten stuck right as you lift arcing and have to wingle it loose and then start your free hand ????

@juangiraldopopayan4694 Жыл бұрын

Elegante

@stevensteffany170 Жыл бұрын

🔥🔥

@user-wt9jf7bc4s Жыл бұрын

Awesome. Great video. Could you do a tutorial on a 4g overhead tig?

@X3MTIG Жыл бұрын

Thanks, yes I might one day!

@ravikoralagamage307 Жыл бұрын

Good job

@X3MTIG Жыл бұрын

Thanks bud 👍

@ravikoralagamage307 Жыл бұрын

I wont to luner mor

@glensamson2235 Жыл бұрын

Good video for beginners, for sure. I myself use the keyhole and dab from start to finish, with a 5/32 gap 3/32 filler rod .But my amperage is lower than yours

@fabioviana9765 Жыл бұрын

fa club brasil x3m tig goooddddddddd jobbbbbbb👋👋👋👋✌

@tigerblack1056 Жыл бұрын

Hi.. can you do a 2g ss big pipe root.please ,thanks i love you video....

@X3MTIG Жыл бұрын

Ok I will try

@chrisplayz253 Жыл бұрын

Excellent vid m8 did u run the buffing wheel between root and hot pass tho? I'm learning pipe atm on 6 inch carbon slowly getting it, is stainless that much different to weld?

@X3MTIG Жыл бұрын

Hey bud thanks for comment. Yes, I did use buffer between passes. To answer your last question, yes it’s different tho . Requires little bit more skills, more arc control and proper set up prior to welding.

@wesleyford8389 5 ай бұрын

Man, you do awsome work, how long have you had a tig rig in your hand

@X3MTIG 5 ай бұрын

20+years

@wesleyford8389 5 ай бұрын

@@X3MTIG no wonder your so good...🤣

@stefanm5636 Жыл бұрын

Subscribed you deserve it! Thank you for sharing your knowledge with us. Can I ask where are you from ?

@X3MTIG Жыл бұрын

Thanks buddy, I appreciate that 👍 I am from Croatia , but live and work in Canada!

@stefanm5636 Жыл бұрын

@@X3MTIG Poznao sam ti dijalekt ;),stvarno si doktor , bili mogao neki tutorial o tig lift da snimis? Ja se bavim zavarivanjem ali tig nisam savladao.Pozdrav od Crnogorca.

@pinoymetal Жыл бұрын

I’m very in resting to watch your video brother

@X3MTIG Жыл бұрын

I appreciate that

@kasheemcoggins4875 Ай бұрын

What tools are you using to measure your landing .. that good thing in your hand ?

@X3MTIG Ай бұрын

Hi-low gauge

@Lilherrm Жыл бұрын

When closing the root, do you have to turn down purge or did you leave it as is?

@X3MTIG Жыл бұрын

Hey bud thanks for your comment. I just leave it as is. In case if purge is pushing your puddle out, especially when closing, you can turn down.

@Altruistic-Viking Жыл бұрын

Nice vide mate, what type of gas do you use for purging?? I prefer a mix called Formier gas, argon/helium/02

@X3MTIG Жыл бұрын

Thanks bud. I’m using just Argon for purge.

@Altruistic-Viking Жыл бұрын

@@X3MTIG any reason for using pure argon ?

@kevinmioto2248 Жыл бұрын

Nice vids.. Where are you from?

@X3MTIG Жыл бұрын

Thanks bud. I am from Croatia, but I’ve been living, and working in Canada.

@frederickmateo2355 Жыл бұрын

sir no landing vevel no problem carbon & stainless steel

@liljayharden Жыл бұрын

What kind of blade did you use to get the burrs out

@X3MTIG Жыл бұрын

Hacksaw blade for stainless steel

@adamw.6488 Жыл бұрын

welding up in kitmat?

@X3MTIG Жыл бұрын

No bud, never been there.

@alejobello6199 Жыл бұрын

how you set up your camera hahaj

@stephenmulcahy9430 Жыл бұрын

How do you record your content?

@X3MTIG Жыл бұрын

Nothing fancy bud, with cell phone!🙂

@michaelriccardi424 Жыл бұрын

Thats a hell of a purge. How much gas does that take?

@X3MTIG Жыл бұрын

Hey bud, approximately quarter of 12 packs .

@alexmangan4101 10 ай бұрын

How can I prevent suckback?

@X3MTIG 10 ай бұрын

Try with heavier root pass

@amirh168 Жыл бұрын

Can someone tell me what is the name of this thing 1:57 , I need to buy it

@X3MTIG Жыл бұрын

HI-LO Welding Gauge

@SedDesh-vr7iw 8 ай бұрын

I don’t understand the purge ? Once you remove the tape to weld it will fill up again … ??

@X3MTIG 8 ай бұрын

It won’t as Argon is heavier than air…

@user-jz3lc3tf1g Жыл бұрын

滴123，滴123

@ravikoralagamage307 Жыл бұрын

I am welder

@XTheJenovaProjectX Жыл бұрын

Are you using a foot pedal? I couldn’t tell.

@X3MTIG Жыл бұрын

I don’t use foot pedal, especially not in the field.

@XTheJenovaProjectX Жыл бұрын

@@X3MTIG what are you using then?

@X3MTIG Жыл бұрын

@@XTheJenovaProjectX just a remote

@hariowen3840 Жыл бұрын

Er! - I wouldn't call rooting a pipe butt weld TIG Welding For Beginners.

Жыл бұрын

Beginners??????

@X3MTIG Жыл бұрын

Talentirane pocetnike😜!