Shows solutions to rust with products to convert and arrest rust on metal pieces, leaving a primed surface for painting. Phosphoric acid will atop, inhibit, convert, remove, even prepare metal for painting.
Пікірлер: 168
@deankay44342 жыл бұрын
This is great information for anything metal including our vehicles! Thanks for sharing!
@toner57093 жыл бұрын
very good and impressive demonstration, thank you
@randyschmittou8708Ай бұрын
Thanks for sharing. I have some of my Dad's and Grandpa's old tools. I can restore them now! I think of them every time I use those old tools.
@keithhupp5995Ай бұрын
I wish I had some of my fathers old tools.
@buildingsupplyco6 жыл бұрын
Great tip! Excellent video, straight to the point.
@MrHardware16 жыл бұрын
I love that stuff. Oil based primer never killed the rust for me like this. Blair
@RastusFlanigan5 жыл бұрын
That's awesome thank you from Florida, kind sir!!! 👍🏼👍🏼
@MrHardware15 жыл бұрын
Glad to help, Blair and Tim
@apuuvah Жыл бұрын
I would apply 40% thick(ish) coat with a brush. Then wash it away (with a pressure washer), let it dry and spray with 20% mix. Once thoroughly dried, paint over with a (zinc phosphate) primer.
@eirikmurito7 жыл бұрын
Great demonstration
@BEEBEE1594 жыл бұрын
Thank you so much for making this video. I hope I can find this stuff at Walmart or Lowes...
@shuxes8 жыл бұрын
thanks for the video, very helpful!
@davidshettlesworth14426 ай бұрын
Thank you for an excellent video! Carry On Sir!
@RINEYMOTORSPORTS8 жыл бұрын
Great video it was nice talking to you a couple weeks ago when I came in for the screen door rollers
@MrHardware18 жыл бұрын
+scott riney Nice seeing you, thanks
@Hadrada.4 жыл бұрын
Mr. Hardware hi does this work on cars without damaging existing paint work? Thanks
@kitjasabsgabs18302 жыл бұрын
@@paperman9708 I've used it and had no issues. Epoxy and urethane. Gotta neutralize with water or that and Baking soda. Be fine.
@olitonottero7620 Жыл бұрын
super helpful thank you !!
@danielmierop6628 ай бұрын
Thank You!
@DarlingBo-bannie3 жыл бұрын
Thank you.
@smolboyi5 жыл бұрын
dope video, thank you much
@jonathanbetenbender307 Жыл бұрын
That black coating is actually a more stable version of rust (it has an extra oxygen atom).
@jeyapaulsamathanam70575 жыл бұрын
Great video. Thanks Mr.Hardware. Is it a special kind of paint you use when the phosphoric acid has dried ? Or is it a clear coat ?
@MrHardware15 жыл бұрын
I use any good quality oil-based paint. An exterior varnish should work also.
@kickerpunter84149 ай бұрын
Great video, & I have a question. This is probably a dumb question, but can you sand that afterward & get it shiny? Thank you. I've heard of Ospho. I've had a little rust problem on the roof of my truck. This is probably the way to go from what I've seen so far. Thanks
@MrHardware19 ай бұрын
Of course, if there is any rust residue I re-apply the ospho and rinse off any excess a few hours later.
@lueriver54743 жыл бұрын
Sheeze-a-nut looking so nice
@projet29076 жыл бұрын
Thank you for his video, I have never used plastic steel wool, is there a v=brand you recumbent and what grid do you use ?
@MrHardware16 жыл бұрын
We use several brands, the most common is a scotch pad. I use medium to coarse depending on the amount of rust.
@scottloutner52533 жыл бұрын
You can buy a box of purple and the fine grey at any paint n body shop.
@JONNYCABANI3 жыл бұрын
Very informative video. I am planning on using it for undercoating my truck. Do you think I can spray on CRC inhibitor after it does its thing. Also any problems with rubber or plastic? Thank you
@blairgilbert76063 жыл бұрын
Plastic is safe, rubber I would limit the exposure time. I would use oil based paint before I would use CRC.
@JasonH13372 жыл бұрын
it probably won't help with undercoating. did you ever try it
@imperialsecuritybureau60373 жыл бұрын
Would this be a surefire way of protecting and ensuring a rust-free surface _after_ using more aggressive methods such as media blasting or dustless blasting? Can imagine this would really prolong the life of a steel boat hull after first removing the thick layer of rust, along with compatible paint, given that it not only protects but would also get any fly rust and would apply its magic to any missed pits or dents.
@allmycarsisbroke2 жыл бұрын
Yes, in fact if that's how you intend to use it, you can mix the acid 50/50 with water first, then rub it onto the metal, then rinse it clean with water (and mild detergent if desired, but not necessary). It actually mentions this in the instructions on the back of the bottle for many phosphoric acid rust removers. This diluted 50/50 acid/water-then-rinse step is recommended to help bond base coats of paint after washing the item with soapy water if needed, followed by a full-concentration treatment with the acid to ensure all rust, oil, dirt and grease is removed.
@kitjasabsgabs18302 жыл бұрын
@@allmycarsisbroke so use the 50/50, then wash, then full power then wash then prime or paint a fender? Or door etc? Ppl say don't use it the paint won't stick. Well alot of company's use acid to get metal to paint so why not me or whoever? Thank you. I have some Ospho and it has directions for oil based paint but not epoxy or urethane.
@kurkkobain10 ай бұрын
@@allmycarsisbroke i just apky and leave never clean wuth water, sometimes paint over it sometimes not..
@allmycarsisbroke10 ай бұрын
@@kurkkobain interesting. I don't have any experience painting over after allowing undiluted, non-neutralized acid to dry and not rinsing, but I have read a lot of comments from others saying that doing so tends to create problems later with the paint bubbling. You haven't had that problem? What kind of paints and primers are you using? Are you sanding before painting? Etc.
@garymontesano590327 күн бұрын
A proper restoration would involve removing the wood handle so all the metal can be treated, as well as cleaning up the handle and coating it with boiled linseed oil. After treating the metal, it can be coated with any kind of auto wax then wiped clean.
@flavius38964 жыл бұрын
"A piece of grandpa lives on!" Thanks.
@creepyloner19794 жыл бұрын
don't ruin perfectly good patina with black spray paint. use clear coat or wax.
@dontblameme63282 жыл бұрын
Or boiled linseed oil or shellac.
@wildmanofborneo9 ай бұрын
Does Klean Strip Concrete & Metal Prep leave behind some latex or acrylic coating? Is there a rust converter that only uses acid? Seems like some latex coating will negate the ability to use a primer. Ultimately, you're limited to the adhesion of that latex or acrylic.
@MrHardware18 ай бұрын
I’ve never used this particular product although it looks pretty much the same as everything else I’ve used. I’m old-school, so I still recommend prep be covered with oil base paint first or an oil base primer and then you can put latex on top of that, if desired.
@wildmanofborneo8 ай бұрын
@@MrHardware1Concern is that an oil based primer doesn't help very much if you're limited by whatever smoo they might have put in the converter (perhaps to avoid flash rust). I asked Klean Strip directly so we'll see what they say.
@MrHardware18 ай бұрын
@@wildmanofborneo I bet it’s dilute phosphoric acid w/no important ingredients. That’s what’s in the commercial brand I used on my steel seawall 20 years ago. It softens the rust and sucks out the oxygen so when painted there is no oxidation (live rust) going on underneath. I’ve cut it w/distilled water to use in a tank sprayer when doing large areas that I still maintain and with great results.
@ray6504203 жыл бұрын
Very helpful
@rickoshay65546 жыл бұрын
I've successfully used Ospho in a number of applications and have been very happy with it. Recently, I've wondered about using it to pretreat concrete rebar. Do you have any experience with this or know anything about the long-term benefits in such an application?
@MrHardware16 жыл бұрын
It would be helpful if there was a film of rust on the bar. Sorry I cannot speak about the long term results of encasing steel in cement but I feel it wouldn't hurt. A quick coat of any enamel paint, even thinned would really help. Blair
@kitjasabsgabs18302 жыл бұрын
Like he said set the ends in a salty bucket and let it rust. Says on the bottle it can be used to protect clean iron after sanding, grinding, sandblasting etc. Look it up and read the label. From my direction it looks like it will work
@boots7859 Жыл бұрын
Thats a pretty slick idea. Get a tube, or split a piece of capped PVC, fill with PA and soak your rebar in it. Then, maybe coat it with an elastomeric paint or other rubberized coating. A bit of work, however still probably a lot cheaper than galvanized,FRP or stainless.
@Ryan-yi6su3 ай бұрын
What's your opinion on having to neutralize it with water before you paint
@MrHardware13 ай бұрын
I’ve used water to remove excess product from the surface but most the time when I use it I don’t. I’ll let it dry and I paint over it with an oil base paint.
@mobilecommunicationsnetwor52683 жыл бұрын
With these products work on an iron railing?
@MrHardware13 жыл бұрын
It should work great, I always use it on steel but the goal is to remove oxygen to stop the rust. Iron has oxygen also.
@kevincarpenter81419 ай бұрын
The metal gets a black coating on it are you supposed to paint over that or rise it off first and then paint over
@MrHardware19 ай бұрын
When I painted my seawall cap, which had been painted before, and had some paint here and there, I had to rinse the phosphoric acid off the painted areas because it remain tacky. It dried in an hour, and I was able to get a nice coat of oil based enamel over the top.
@eamonnmurphy5385 Жыл бұрын
I live in Thailand, we can't buy the products easily here but I can buy the acid on its own. Any ideas what I would add to the acid to help it bond?
@MrHardware1 Жыл бұрын
I bet the phosphoric needs to be diluted to a certain ratio. It doesn’t need anything to help it bond, it cleans, removes oxygen and is the prep for the finish which I prefer to be an oil-based paint.
@titan3718 жыл бұрын
Nice video just one question. You don't have to neutralize the acid ?? Before primer or paint?? Thank you
@MrHardware18 жыл бұрын
+titan371 No, once the acid is dry, short of excess powder, the metal is ready for paint.
@kitjasabsgabs18302 жыл бұрын
@@MrHardware1 even for epoxy or urethane? Hope u still answer.
@MrHardware12 жыл бұрын
@@kitjasabsgabs1830 I don’t see why not. Usually I paint exterior metal w/oil based paint. I don’t see why epoxy and urethane would be different although before I committed to a big project I would test a small area first.
@kitjasabsgabs18302 жыл бұрын
@@MrHardware1 Oil is fine but for epoxy it's not so good. Idk about urethane or enamel as I always just shoot epoxy over the converted metal. Thank you. Have a great day sir. Semper Fi
@MrHardware12 жыл бұрын
@@kitjasabsgabs1830 Thank you, and thanks for your service.
@kitjasabsgabs18302 жыл бұрын
What do I do if using epoxy or urethane paint and not oil based?? Like painting cars Thank you
@MrHardware12 жыл бұрын
Automotive finishes can be tricky, first test a small area.
@theonemodifier5 ай бұрын
Did you just mix those half and 1/2 with that big green jug with the must for rust bottle
@MrHardware15 ай бұрын
Yes, that product when sprayed on as liberally as I did is allowed to be cut 50% with water.
@cslloyd14 жыл бұрын
my garage doors is rusty, but a lot of the rust is underneath a layer of paint (pretty sure its latex) and looks like bubbles in the paint. will this work though the paint?
@n2i1k2o1l2a4 жыл бұрын
no. it will only work on exposed metal. Sand back the affected area, get rid of scale-y rust and then apply the product, then primer then paint
@cslloyd14 жыл бұрын
@@n2i1k2o1l2a Thanks. Sanding doesn't work so well on this latext paint. I found that I can use a 4" razor scraper to chip away the paint bubbles quite well.
@MrHardware14 жыл бұрын
@@cslloyd1 My favorite tool for the job is a paint and rust removing wheel that goes on a drill. I think Norton makes them now, the old brand is discontinued or I would send a link. Like a plastic steel wool pad for a drill.
@cslloyd14 жыл бұрын
@@MrHardware1 ok, thanks. I see some nylon abrasive wheels at HarborFreight. I am also considering one of their $20 sand blaster. I live on the beach in Florida, so plenty of sand available.
@virendraaghera12186 жыл бұрын
hi would using phosphoric acid clean up the rust on car body panels and parts
@blairgilbert76066 жыл бұрын
Of course, rust can be removed off any steel that I'm aware of.
@WilliamVG8 ай бұрын
When treating, I'm getting white powder on the metal afterwards unless i wash it off immediately but as a result, the steel will flash rust. Any advice?
@MrHardware18 ай бұрын
I’ve found the white powder to be when an excess of ospho, I’ve never seen flash rust rinsing off excess w/ water. If so I’d wipe a little more ospho on it and wipe off.
@WilliamVG8 ай бұрын
@MrHardware1 Your correct, the white powder was more noticeable when applying a heavy layer of phosphoric acid. The good news, it wipes off fairly easy.
@termonostruman4 ай бұрын
can i use it to take the rust from my body, ? i have 96 years old and i feel rusty...
@MrHardware14 ай бұрын
Not if you want to see 97….
@gregkotoch27654 жыл бұрын
Why does it have to be oil based paint? Can I use rustoleum enamel paint?
@MrHardware13 жыл бұрын
Rustoleum is oil based. Perfect.
@emergencylowmaneuvering73503 жыл бұрын
I did underside my Jeep. Can i leave those white residue there?? Or all white residue has to come out??
@MrHardware13 жыл бұрын
I found it to be harmless. You may rinse it off w water
@emergencylowmaneuvering73503 жыл бұрын
@@MrHardware1 It does not come out with water even ah high pressure from garden hose 55 psi. If that is phosphoric acid, i dont think is non poison. ???
@MrHardware13 жыл бұрын
@@emergencylowmaneuvering7350 what ever residue I have had , if it doesn’t rinse off, w/ regular water pressure, has not prevented my paint from bonding. Poison, yes. Don’t consume or breathe any.
@emergencylowmaneuvering73503 жыл бұрын
@@MrHardware1 Thanks. Excuse me, i have to go vomit phosphoric acid now. I consumed too much today. LOL..
@kurkkobain10 ай бұрын
you must be using it very concentated or waht? i just aplly rust turn black and a leave that way, bçlacxk cant see any white there,,
@sarahbranson61105 ай бұрын
Can you use it on car rust?
@MrHardware15 ай бұрын
Exactly, rinse any excess off painted surfaces
@jakestephen5084 жыл бұрын
How do you get rid of the white residue? I washed it off with water but it’s not coming off
@kitjasabsgabs18302 жыл бұрын
Reapply Ospho or whatever, let sit for 5 min, wash with water and scuff pad and dry with air or heat. Prime and paint or just paint.
@reck0n3r3 жыл бұрын
What about coat of rust protector instead of oil based paint?
@MrHardware13 жыл бұрын
I don't see why not... if it will wear as well.
@georgegalvan90665 жыл бұрын
Aahxygeen..... oxygen. This guys accent is awesome braaaah.
@themonkeydrunken5 жыл бұрын
AAAAxe-a-gin! I love it
@RalphSampson...4 жыл бұрын
I believe I would not have painted it. Just use the acid; wipe it down; wash it; leave. Certainly not a gloss black. Maybe, a flat or satin grey. Naaaaa, leave it natural. But, thanks for the lesson on how to use the phosphoric acid.
@johnnyboy84984 жыл бұрын
If its just being used for display I can understand the paint, but I agree. I'd probably coat it with something like boiled linseed oil or something like that.
@kurkkobain10 ай бұрын
i just paint and leave
@PanamaSticks10 ай бұрын
aAren't you supposed to rinse it off with water after a few minutes? I had a very old bottle of the stuff that said so on the label.
@MrHardware110 ай бұрын
My bottle says when dry to dust off any powder before painting. It does say when used to etch galvanized metal, which is hard to paint when it’s new, to rinse off after you’ve etched the galvanized.
@kurkkobain10 ай бұрын
i used for s lond in never rinse it, its not a acid anymore so what rinse yo have to rinse muriatic not this.
@UZI9MMAUTO2 жыл бұрын
I have pure phosphorus acid. But what the HELL is used as a base/carrier to prime n convert. Otherwise my steel turns white. If you've ever used ", rust converter". It turns BLACK! What do I mix it with???
@MrHardware12 жыл бұрын
I have diluted it w water when coating 200’ if steel seawall. I removed white residue w water on a rag then dried off.
@steelcantuna4 жыл бұрын
I want to thank all you Yankees that have NOT moved to Texas or the south. I love Yankees that stay up north.
@deansley1743 жыл бұрын
👍👍👍
@Rottingboards4 ай бұрын
Don't you have to neutralize with baking soda?
@MrHardware14 ай бұрын
No, excess can be removed w/water. Once dry it is stable and unless there is excess film it is ready for paint.
@lordterra13773 жыл бұрын
If I want to spray on a oil based truck bed coating to freshly etched metal using phosphoric acid, would I need to remove the acid for better adhesion? The directions for the truck bed coating says bare metal works best. But I don't see why the acid wouldn't help it stick better, just like the paint?
@MrHardware13 жыл бұрын
To me, the importance is killing the rust. I have not found the residue to hurt the adhesion of an oil based paint yet.
@lordterra13773 жыл бұрын
@@MrHardware1 Other than removing the white residue I have found you still need to scuff the metal with a scotch bright to a smooth finish, unless you plan on many layers of paint to coat the metal, unless the surface is even it will show in your paint. The darkened layer is the acid left over, it takes a fair amount of effort to strip it back down to the bare metal.
@kitjasabsgabs18302 жыл бұрын
@@lordterra1377 I thought dark is where the rust was chemically changed to phosphate and can't rust no more? If I sand it off that cancels out the reason for use? How about if I neutralize the acid with water or baking soda? No more acid to react with anything after that and paint with epoxy? Etching primers have acid in them and you primer and paint over them.
@jimcatanzaro78088 ай бұрын
What percentage is the acid wash ? 30-99 percent
@MrHardware18 ай бұрын
Straight from the bottle.
@ChickenBhunaHot4 жыл бұрын
Plastic steel wool??
@MrHardware14 жыл бұрын
A Scotchpad is an example.
@dominofive50753 жыл бұрын
Acid-based🤔
@pic56378 ай бұрын
Like phosphoric acid that is found in Coke?
@MrHardware18 ай бұрын
I can’t say, but it does clean a few household projects.
@isbemorph8 жыл бұрын
derusting inside of a fuel tank would be more challenging, because how to ruboff phosphoric acid remains
@MrHardware18 жыл бұрын
They make a special cleaner, sealer, coating for gas tanks. Sorry out of Blair-land. ;0}
@Supanova706 ай бұрын
Total different process in automotive..The ONLY acid cleaners SPI recommends is Opsho, PPG and DuPont metal preps as long as their instructions are followed to a tee. Use any other system you want, just do us a favor and use no SPI over them. There can be NO shortcuts for good results. Ospho, is a great product for automotive if used right, we give scare warnings because we want people to call so we can make sure they know how to neutralize it, so no problems will arise. Only one way to use and here it is: Use as needed and apply as many times as needed to get the spot Clean let dry and leave for months if you want, don’t matter. To neutralize the Ospho MUST be wet, so if dry, re-wet with itself and let set one or two minutes and with a clean rag and water, wipe off like washing the car and then dry. Next, then da car with 80 grit, clean with 700-1 wax and grease remover, let set an hour and coat with an epoxy. Notes of interest (maybe) If you try and sand dry film off you will lose 40-60% adhesion (per adhesion tester as some will embed itself in metal and amount depends on how long the Ospho has been on panel as we do know acid films degrade with time but due to many factors we cannot pinpoint a time frame. The tape is not a test, use razor scraper after 7 How does it fail? Here are a few calls. Washing car and hose bounced up, hit car and paint bubbled. Kids finished ball game and ran by car and tossed ball gloves on hood, next day two big bubbles. Wife got bag out of trunk, closed trunk and set bag on truck to play with keys, next day a bubble there. My FAVORITE TECH CALL at least once a month, my body filler dried and sanded great but Then I got to metal is was gummy, DO I HAVE A BAD HARDENER? Nope only one thing, you applied it over an acid film..
@MrHardware16 ай бұрын
Wow, thanks for all the tips. Who is SPI, I can’t find who you work for, just out of curiosity. Blair
@darrylchase3688 Жыл бұрын
Why not actually remove the rust with muriatic acid, then neutralize with baking soda and water, then treat with phosphoric to convert and seal the remaining rust?
@MrHardware1 Жыл бұрын
I don’t like to put muriatic acid in an amateur’s hands. Besides the phosphoric acid does loosen and clean most of the rust while priming the metal.
@darrylchase3688 Жыл бұрын
@@MrHardware1 Understand the concern. It might be a hazard in confined spaces or underneath the car. I like that muriatic eliminates all rust, but it does need to be neutralized before it eats into the steel.
@jimdomi62066 жыл бұрын
Who ever did the editing for this video,,don't quit your day job...holy shit it's tough to watch with the video cutting out every few seconds
@MrHardware16 жыл бұрын
We are working on upgrading our editing software, sorrry.
@Nicholas-zn9yv6 жыл бұрын
i thought it was good man. honestly.
@tylerdurden73585 жыл бұрын
Editing in this video is great, jump cuts hold your attention. If this was a 5 minute video with no cuts you'd fall asleep, def don't change a thing, the cuts makes this video great
@themonkeydrunken5 жыл бұрын
@@MrHardware1 Don't listen. It was entertaining! Thanks for posting this and keep up the good work my friend!
@thevikig420 Жыл бұрын
Tie Domi feeding you uppies until you cant stand up anymore is what I wish had happened to you immediately after your comment. On a video of a dude just throwing some free info out. you managed to be an ingrate douchebag co**su**** worthless piece of shi* all in one one needless comment. Way to go twat.
@bledlbledlbledl9 ай бұрын
I clicked on this because the title said "Phosphoric acid". Rather than a phosphoric acid-BASED product, have you tried using just phosphoric acid by itself? (the stuff can be bought plain, so i was thinking about trying that option on some rusty metal; but if someone has already tried it and had bad results, I won't bother with the plain stuff)
@MrHardware19 ай бұрын
I can’t say, but I’m interested. Is it easy to purchase?
@bledlbledlbledl9 ай бұрын
@@MrHardware1 probably . ama zon claims to have it, but when i posted the link to it here it wouldn't post. I saw it listed at 10% and at 75%. was considering getting the 75
@MrHardware19 ай бұрын
@@bledlbledlbledl I’ve had such good results from ‘store bought’ Skyco Ospho that I never desired something stronger. If I were trying to do a very large area I might consider something stronger so I could dilute it to save $$. I also like to patronize local merchants over mail order. I want my merchants here to stay.
@bledlbledlbledl9 ай бұрын
@@MrHardware1 for the price, I'll probably go with that, then. (i looked up the percentages of ingredients just now, and i get more phosphoric acid for the money with the ospho anyway)
@davef.5666 жыл бұрын
Hi I like how you tell the truth about way to remove rust to prevent new rust use car wax .. I subscribed check out the other ways to remove rust on youtube
@MrHardware16 жыл бұрын
Thanks, Blair
@mr2octavio3 жыл бұрын
The cuts are too much
@scrapenbass493 Жыл бұрын
🤷♂️🤦♂️
@cocopublicnews67662 жыл бұрын
After I used phosphoric acid Iit turned yellow after I washed it off sprayed it will acid again didnt wash it off it turned white and oily
@MrHardware12 жыл бұрын
I’ve never seen it create an oily surface. Is it a phosphoric acid for Rust cleaning or just the pure product? I would think, without knowing for sure, that it should rinse off with water and dry hard so it can be painted.
@cocopublicnews67662 жыл бұрын
@@MrHardware1 85 percent technical grade I diluted it 4 to 1 with water the trick is to actually get a rag and wipe it not just spray the rust off perfect bare metal finish now even after the morning dew
@apuuvah Жыл бұрын
Nothing, and I mean NOTHING beats phosphoric acid as a 1) Rust remover, 2) Rust converter and 3) Primer. As stated, works by pulling oxygen out of iron oxide (ie. rust) and converts it into passive iron phosphate (black/grey). Needs to be at least 20% phosphoric acid mixed with water. Heat speeds up the process dramatically. To put it another way, in cold nothing much happens. You can thicken it with (pink) wall paper adhesive powder to apply a thick(ish) coat with a brush.
@MrHardware1 Жыл бұрын
Thanks, great idea with the thickening trick.
@dontblameme63282 жыл бұрын
Man... This was going good until you pulled out the spray paint and painted that saw. Sinful in so many ways!
@JasonH13372 жыл бұрын
you have to paint it or oil it. it is super stripped after the acid and will rust up real quick
@twirlygirly8 жыл бұрын
yeah but that stuff is really expensive... i wonder if coca cola would work
@MrHardware18 жыл бұрын
+PC5032 I did my boat trailer, a chocolate mess of rust. It was leaving a shadow of rust on my driveway. I sprayed it with half a bottle, $14.99 a quart, painted it with Valspar Industrial Oil Based enamel, 12 years ago and it still looks great. It was my only primer, I find that as inexpensive and any other primer.
@twirlygirly8 жыл бұрын
+Blair Gilbert good testimonial. ill have to get some. I've been using electrolysis and Evaporust, and then Rustoleum Rust Converter as my primer. Also not really cheap either.
@MrHardware18 жыл бұрын
+PC5032 I only use one of any of those products at a time. Must For Rust is the one I usually use.
@MrHardware18 жыл бұрын
will cola remove the oxidation from the metal? I don't know, Blair
@twirlygirly8 жыл бұрын
I found lemon juice concentrate works almost as good as Evaporust... and you can buy lemon juice with freaking Food Stamps. Can't beat that for price! Leave your part in lemon juice 24 hours, or overnight. Scrub with an old tooth brush, wash off rust , put back in if you need more. When lemon juice wont get any more off (the very last deep pitted stuff) wash the part and drop it in phosphoric acid prep and etch to get the last bit off and prep the metal for priming. Phosphoric acid is even stronger than lemon juice, but you actually have to buy that at home depot.
@tulius016 жыл бұрын
Just use hydrochloric/muriatic acid the rust will be gone in seconds but you have to neutralize it after the process with soda-water solution and rinse it well with water. So much faster and better than phosphoric acid.
@MrHardware16 жыл бұрын
The problem w/muriatic acid is it more dangerous than phosphoric. I recommend it to customers that have experience, not to newbies. Thanks Blair
@bigtxbullion5 жыл бұрын
Hcl and muri continue for weeks months. It will continue to break down
@kitjasabsgabs18302 жыл бұрын
@@bigtxbullion not if neutralized. That chemically stops the reaction, no reaction no breakdown. In 60s they'd dip whole cars in acid to thin metal and make them lighter. So you are right but if you stop the reaction it'll be fine. They used a soda mixture.