Extract Remove Harley Davidson Primary Cover Bolt Stripped Head

No video

Extract Remove Harley Davidson Primary Cover Bolt Stripped Head

Рет қаралды 74,231

Күн бұрын

OFFICIAL WEBITE ARTICE AND INFO: www.lawabidingb...
Purchase a bolt extractor tool through our Amazon Affiliate Link to support us: www.lawabidingb...
In this DIY video we show you how to easily remove a bolt from a Harley Davidson primary cover where the head has been stripped out. These primary cover bolts are a torx drive T-27 and can easily be over tightened and the heat tends to weld them in a bit. We have an easy fix for you, so take a breath and relax.
These Harley primary cover bolts get removed each time you do an oil change, so that you can fill the primary drive back up with oil. Save a ton of money and get on board with bikers all over the world that are now doing their own maintenance oil changes right in their garage on the kickstand with minimal tools after watching our very popular Harley Davidson Oil Change & Routine Maintenance Video!
The T-27 torx drive can slip or not get a good enough bite, thus slipping and stripping the heads at times. Even dealerships deal with this problem constantly with ease. It is nothing to worry about, so take a breath and let us show you an easy fix in this free video.
In this video we introduce you just one type of bolt extractor tool that can be purchased at your local hardware store or by using our Amazon Affiliate Link Here. There are many different styles of bolt extractor type tools.
OFFICIAL WEBITE ARTICE AND INFO: www.lawabidingb...

Пікірлер: 88

@kenb1166 2 жыл бұрын

Just did this on my 18 Ultra and can absolutely state that if those bolts are welded like to the primary that bolt extractor method is not going to work, you just can't get enough depth to grab, what worked for me was using a Dremel tool with a metal cutting blade to create a flat blade screwdriver slot then an impact driver. I'll be using anti seize on the new bolts as well as hex head!

@vilardi20 Жыл бұрын

Hey Ryan....thank you SOOO MUCH for allowing me NOT TO FEEL LIKE A FOOL!!! :) I followed your instructions to the letter...and "low and behold" the screw came right out! Thank you for your very clear and detailed instructions. I'll be watching many more of your videos going forward as this is the very first "3 hole oil change" I've done on my Fat Boy!!! THANK YOU!! THANK YOU!!

@YoshiV819 6 жыл бұрын

Great lesson for rookie mechanics. More advanced tip...invest in a set of left handed drill bits. These bolts are a little small for this to work but I've actually had damaged bolts turn themselves out while drilling the pilot hole for the extractor with a left handed drill!

@RyanUrlacher 6 жыл бұрын

Great tip! Thank you. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

@AmosBHaven 3 жыл бұрын

Yeah! The left handed drill bit (3/16ths), and grinding flat the "pointy" end of the (for lack of a better way to explain it) the "4 cornered square" extractor (made specifically more for brass fittings, then screw type) for, made short work of those stripped out torx bolts! In hind sight however, I'm pretty certain my right handed bit was dull! Gauging the way the "new" bit was cutting! LOL! I replaced 'em with chrome "allen head" bolts (1/4" x 20 x 3/4") and 1/4" zinc lock washers bought at Mernards. 1 stop shopping!

@ShaneSchneider 4 жыл бұрын

Ryan, this video is a great. I looked for this video after having issues removing my primary. I didnt strip the torx bolts, but did damage two bits. I stopped and did some research. I ended up getting two manual impact drivers {the kind you hit with a hammer). I thought I would share what worked for me. Cheap Harbor Freight Impact Screwdriver and Harbor Freight Icon Torx Socket with a 1/2 to 3/8 socket adapter. I had to pound the crap out of it with a hammer, but they all came out without damage. I did buy the extractors you recommended as a backup plan. Thanks for sharing your knowledge.

@RyanUrlacher 4 жыл бұрын

Thank you for commenting. Those extractors do work well. Ride safe & Ride Often! Check out this KZfaq Channel as we have a ton of free videos for you! Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos BECOME AN EXLUSIVE MEMBER-GET BENEFITS: www.lawabidingbiker.com/patreon Leave a flat donation: www.lawabidingbiker.com/donate Shop in the Official Law Abiding Biker Store: shop.lawabidingbiker.com Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app Join our free email club: www.lawabidingbiker.com/emailclub

@wanderlustlyfe Жыл бұрын

Hey Ryan, Huge props and thank you. Just went through this issue this last weekend on my '05 Ultra Classic. your video did indeed calm my ranting hyper ass down and I was able to fix the issue based on this video. I enjoy your channel, very helpful stuff. Keep up the good work sir!

@brettgardner8575 7 жыл бұрын

All five of my screws were stripped. This technique was helpful for one of the screws - Extractor No. 3. I broke two more extractor tools in two of the screws. Big bummer, because these are very hard to deal with once broken off. Dealer must have used lock tight or silicone. I wound up using a torch to get things warm, not red hot, and used a hand impact driver to get the last two out. Thanks for all you do.

@RyanUrlacher 7 жыл бұрын

Super glad you got those out. Great idea on the torch and hand impact driver. Thanks for sharing.

@johnnoorbergen4904 2 жыл бұрын

You guys are awesome, so many great videos cheers from the Veterans in Australia

@duramaxman8242 2 жыл бұрын

Thanks so much. I had to take two screws out of my primary this way. Huge help!!!

@RyanUrlacher 2 жыл бұрын

Glad to help! Ride safe & Ride Often! Check out this KZfaq Channel as we have a ton of free videos for you! Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos BECOME AN ECXLUSIVE MEMBER-GET BENEFITS: www.lawabidingbiker.com/patreon Leave a flat donation: www.lawabidingbiker.com/donate Shop in the Official Law Abiding Biker Store: shop.lawabidingbiker.com Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app Join our free email club: www.lawabidingbiker.com/emailclub

@MrJwh3000 6 жыл бұрын

This video is heaven sent! It worked! Thanks!

@RyanUrlacher 6 жыл бұрын

Right on! Glad we could help you out. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

@michaelcampbell1960 5 жыл бұрын

Thanks Ryan for this video. It worked like a champ!

@beeman1x715 3 жыл бұрын

Thanks Ryan... You're a savior for us bikers 👍

@AwakenedWookie 4 ай бұрын

Right so in order to do this i need a rare, specialised piece that nobody stocks. Great. Thanks for the help....

@joedetweiler8268 4 ай бұрын

Most hardware stores sell the " EZ OUTS" or screw extractors whatever you want to call them. If you dont want to buy a set with different sizes try to find one slightly smaller than the bolt you're extracting.

@andrewcampbell9695 5 жыл бұрын

The last person to touch my primary was a harley mechanic (was actually free for me due to another issue they screwed up and wanted to make it up to me) and when I went to change the primary oil this time I stripped the first two bolts I tried taking out! Tried extracting them using your method, and had to use so much force turning the extractor it too broke off in the stripped bolt!!!! Anyway, I went to try and take off the other torx screws and finally got one loose after using a ton of effort, probably a good 20-30+ ft lbs of pressure, and before anyone asks - yes ft lbs, not in. lbs... It was locked in there unbelievably tight. What sucks is, I asked the dealership for advice and they want to sell me an entire new primary chain case cover, along with a new derby cover. Worst part about it is I'm at the end of my rope, with the busted screw extractor in the stripped bolt, I'm unsure how to proceed. I think my last shot of hope is removing the entire chaincase cover and seeing if I can get a better angle or possibly work it out from the inside (not sure if this is even possible as I've never seen the inside of the primary chain case!) Thanks for the video though, I think it would have worked if mine were not torqued as tight because I had the extractor in there nice and snug but it simply wouldn't turn without excessive force to the point it broke :(

@elliottvangrinsven6574 5 жыл бұрын

rather than buying a whole new housing from the dealership, you might find a local machine shop that could install a set of steel heli-coil inserts to match the original screw size. I think the housing is aluminum, which explains why these holes strip out so easily.

@andrewcampbell9695 5 жыл бұрын

@@elliottvangrinsven6574 Good idea for sure. I went a different route already and bought a cheap $75 chain case cover from eBay, sanded it down and painted it black ( I think it's called engine enamel). Anyway, it looks okay, I bought a new derby cover too so all in all with paint and everything it was about $150 or so to have it replaced. And it doesn't even look amazing, it was my first time ever spray painting chrome and while it looks okay its clearly not professionally done. Of course I still have the old chain case which I may take to a machine shop like you said for the hell of it and that way I have a back up. Anyway, to anyone it concerns I highly suggest not trying too hard with these and if you think you're gonna strip it at all just take it in and have the dealership do the oil change. While it is a ripoff, it prolly won't cost you $150 plus oil/filter to do the change!

@ohmygoditspaul 2 жыл бұрын

Lifesaver, thank you!

@RyanUrlacher 2 жыл бұрын

You're welcome!

@dickjohnson5025 8 жыл бұрын

Stupid place for torx head bolts. After dealing with two stripped heads, I replaced them with stainless allen head cap screws. No more problems. Harley knows this is a common pain in the ass but they don't improve the design.

@RyanUrlacher 8 жыл бұрын

Roger that Dick. Thanks for weighing in and ride safe! Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids bro: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

@TheFosland1 3 жыл бұрын

what size allen head bolts did you use?

@dickjohnson5025 3 жыл бұрын

@@TheFosland1 oh jeese, I forget, been a while. I just removed one of the existing torx bolts and took it to the hardware store to match it up.

@hiwayman981 3 жыл бұрын

@@TheFosland1 Hey there, Andrew. I see it's been a while, but as I'm currently in the midst of this job myself on my Softail, the Allen socket head screws I bought from Lowes are 1/4"-#20 by 1/2" long. Good luck.

@007Smith 4 ай бұрын

This is my current situation on my 2015 SGS. Three bolts will not budge. I may have to bring it in to the dealership 😢.

@cjgocrazygaming1938 4 жыл бұрын

Thanks I just got done doing the belt on my 09 Road King and went to fill the primary and show nuff I stripped 2 screws

@graemedalgleish8944 10 ай бұрын

The wrench required is a 27 torx, not a 25. Ask me how I know.

@kayo4921 4 ай бұрын

Hello it would of been nice to say the bit and back out tool size .

@rugershooter5268 3 жыл бұрын

And what's bad is the chrome screws are in-store only, so I'm changing all mine to black heads with chrome cover. I'm not driving an hour just to get screws There is a screw extractor named speed out, I have this, it hasn't worked yet.....it won't drill into the screw. At work, which I borrowed, we have the type used in video I'm going to buy a set of these $13.55 on Amazon, and a harbor freight set that has left handed drill bits $10 ....... You might unscrew it while drilling I'm down for a few days, good thing I got more than one bike......next time in Lexington I might buy a set of the chrome heads..... I did actually consider putting in thumb screws

@LuanNguyen-ow7su 4 жыл бұрын

I can’t find the exact tool your using when I click on the link?

@gucci4871 5 жыл бұрын

Nice video 👍

@georgezhou1415 5 жыл бұрын

These bolts are super tricky. Mine is a new 2019 fatboy 107. Just doing the 1k myself. All is good until trying to cover this up. I set torque spec according to the service manual and it’s toward the lower spec setting. 90 inch pound. Guess what, didn’t even get to that torque the head of the bolt snapped. Got that out and went to H-D dealer bought 10 new bolts just to be safe. Second one still didn’t reach torque and I can just feel it lost grip. Now I am afraid even use a torque wrench. I just feel that they are tight and stop. Not sure if that thing is gonna to stay on LoL.

@mkelley3411 6 жыл бұрын

This saved my Butt, I owe you a beer or 2. Thanks

@RyanUrlacher 6 жыл бұрын

Heck yah, I'll take the beer!! Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

@jamescole1843 Жыл бұрын

So the dealership put what looks like blue lock tight on my bolts I got one out but I have striped two bits trying to break the other one any suggestion / the bolts are not striped yet

@philipboyd1055 2 жыл бұрын

Thanks big help.

@curtodell4154 2 жыл бұрын

the bit dosent go far enough into the bolt to not strip . torx are bad for this . want this not to happen ever again go to a hardware store and get allen head cap screws like the rest of the bolts on the primary

@geraldwest3428 2 жыл бұрын

Thanks man!

@snakebite7277 Жыл бұрын

My bolts are not stripped but seized. I tried a hammer style torque driver and all its doing is twisting the impact rated torx bit. Any advice on this?

@harleyleija6999 8 жыл бұрын

the bolt does have play and I can take off the bolt so I'm thinking he stripped the inside thread of the housing case not the bolt itself. thank you for vids ,videos are always great

@rkksterbigd1 8 жыл бұрын

+Harley Leija Harley if that is the case you are probably going to have to drill drain the primary fluid, then pull out that bolt. Then you can re-thread the casing. If you don't feel comfortable doing so then take the entire primary cover off and take it to a machine shop. They should be able to do that. Worse case scenario, you might have to buy a new primary case. Rick from LAB.

@jesusdelacruz1576 3 жыл бұрын

Got the tool and it worked. Tried on another bike and the tool broke in the hole. What can I do to get it out?

@user-iv3kg2dh4p 5 ай бұрын

What’s the size of the bit??

@stevenhollis418 Жыл бұрын

I have three that I cannot remove. The heads are totally gone. I’ve tried drilling, but still can’t get out. Is there any way to cut the heads off with a hack saw?

@Backyardsniper73 4 жыл бұрын

On a 04 Sportster what’s the inspection cover screw size? I’m going to need to replace mine.

@duramaxman8242 2 жыл бұрын

Call or go to your local Harley store. They'll be able to get you the screws you need.

@terrywilson7158 2 жыл бұрын

The threads on two of my primary bolts are stripped

@jasperjones6962 7 жыл бұрын

Would like to see a few Shovelhead videos thanks.

@RyanUrlacher 7 жыл бұрын

Definitely. We'll do videos as we get our hands on bikes.

@robertbuergermeier8521 2 жыл бұрын

Thanks. Ryan, I went into freakout mode because I stripped one today

@RyanUrlacher 2 жыл бұрын

Glad to help!

@harleyleija6999 8 жыл бұрын

need to know how to take off the chain housing its leaking primary oil from pervious owner stripping bolt

@RyanUrlacher 8 жыл бұрын

We don'y have that video yet, sorry.

@elliottvangrinsven6574 5 жыл бұрын

Had a related problem with one screw after checking fluid level... but then I questioned why hasn't HD designed in a proper dipstick, or fluid check port? Who in their design-engineering team thinks it's normal/acceptable to remove a cover and gasket to simply check the fluid level? And HD recommends replacing the gasket too... What century are they living in?

@dmgomez100974 6 жыл бұрын

One(1) Head of my screw just went off on my derby cover after installing. Too malleable. Can I do the same procedure? Thanks

@RyanUrlacher 6 жыл бұрын

Yes, you can still drill and tap. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

@dmgomez100974 6 жыл бұрын

Ryan Urlacher thank you

@dmgomez100974 6 жыл бұрын

Thanks a lot Ryan. Just did the same and it went off!!!! 😊

@Spekturd101 7 жыл бұрын

can i use an easy out extractor tool.. and what size was that bit?

@RyanUrlacher 7 жыл бұрын

Yes, you can use the easy out brand. We just prefer this type.

@jerryhubbard4461 7 жыл бұрын

I had three of mine that would not come out with the T 27. I took my manual hammer tool, put the T 27 bit on it, took my hammer, tapped on the tool while turning and all of them came out with not much effort.

@RyanUrlacher 7 жыл бұрын

Very good!! Glad you got them out

@marcuswray1797 4 жыл бұрын

I went and bought a screw / bolt extractor and it did not work. The bolt is way to tight.

@RyanUrlacher 4 жыл бұрын

Darn

@barbarapalmer6114 8 жыл бұрын

would you recommend this method for extracting a rounded breather bolt? my problem is the air filter mounting plate on a Harley Breakout, which I am changing for a Screamin Eagle heavy breather. Whilst attempting to remove the two mounting/breather bolts one of these has a hexagonal nut area that has become rounded so that the socket slips off of it, I am tempted to use the breather hole and this tool but am obviously aware that fragments could travel through to the crankcase area. What would you suggest for this particular bolt? Thanks for your help, Mike in the UK.

@rkksterbigd1 8 жыл бұрын

+Barbara Palmer Depends Mike. Breather bolts are sometimes different from kit to kit. So I will be generic with this, they are normally hollow so it would be tough to drill in for fear of tearing it apart, but it could work. You may not need to drill at all. Get a easy out that is a little to big for the hole and work it into it. Then you can try backing it out like we do here with a crescent wrench, or even wrench. I've had luck on other bolts taking a chisel and creating grab areas and then putting a vice grip on it. Rick from LAB.

@hdgoose7910 5 жыл бұрын

I cant get out those stupid torx screws off my cover. I think I started to strip them out. Is there a regular hex bolt replacement? Stupid place for small torx bolts.

@RyanUrlacher 5 жыл бұрын

yah, many go to the hardware store and replace them with hex bolts. Easy. Just get stainless ones.

@rachelthomas3038 7 жыл бұрын

OK I bought some bolts for my husband's derby cover they stripped and have broken the extractor tools any ideas

@RyanUrlacher 7 жыл бұрын

Wow, that sucks! You may need to replace the primary cover if you can't extract the inspection cover bolts. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

@malcolmsmith8234 6 жыл бұрын

Hey Ryan! One of my buddy’s came over to my garage and said he couldn’t get one of the cover screw/bolts out of his primary cover! He said he took the T27 bit and he said it was so torqued that it broke the tip of the bit! How would you go about getting this over torqued bolt out? I checked the others and they were way tight to beyond normal torque tight

@RyanUrlacher 6 жыл бұрын

You'd have to use the same procedure and it may work. Otherwise, you'll have to drill it out and re-tap it. Wish it were easier than that.

@graemedalgleish8944 10 ай бұрын

Talk to a welder that knows what he is doing.

@jasonbrodsky2593 7 жыл бұрын

What is the brand of extractor used in this video?

@RyanUrlacher 7 жыл бұрын

No brand. Hardware stores have them many times in drawers or buckets w/ different sizes.

@jeffreyuyanik1182 3 жыл бұрын

I’m trying to do some work on my new 2021 Streetbob. I can’t get these fucking torx screws out for the life of me. Bolts aren’t stripped, idk what to do. Might have to give up and take it to a Harley shop just to do the work for me

@200papabear 8 жыл бұрын

i got a question im leaking out of the derby and dont know why have a brand new gasket and it still leaking

@RyanUrlacher 8 жыл бұрын

Gasket isn't seated right likely. Take the cover back off and make sure it's all seated right. Torque bolts to proper specs...... Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids bro: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

@xzsdfvdfbv 3 жыл бұрын

3:08

@rockusrock 5 жыл бұрын

What a stupid design by Harley! Frustration to Max!

@cammed_hemi7638 Жыл бұрын

I’m struggling with one screw badly stripped. I’m trying to drill a whole in the middle but it’s not going anywhere. Drill bit spinning in the same spot. Any tips would be greatly appreciated.

@BBboykh Жыл бұрын

did u ever figure it out? i’m having same issue. been through 3 drill bits and hours with no progress