I've owned motos all my life. I started riding bikes at 15. I've continually had a moto and a pick up truck since then. I'm 73 years young now and still have a pick up and three Harleys. I've wrenched on all my bikes through the years. Learning along the way. All my friends ride also, but some are not mechanically inclined so I help them when they need some help. I had the opportunity to graduate from MMI several years ago. I learned much about the new EFI bikes, and a whole lot more about the older bikes. I've built and sold many ground up HDs in my home garage. I decided to retire earlier this year and sold all my machines and closed down my shop. I was fortunate to have a father that was exceptionally good with his hands. That man could tackle any problem and come out on top. He taught me everything he knew. From concrete, heavy equipment, mechanics, horticulture, agriculture, BBQing, patience, etc, and how to survive in life. My life has been full, and I now enjoy the time with my kids, grandkids, and soon great grandkids. So if you don't know much about how your bike works, hang out with that greybeard in your group and sit by his side as he's wrenching on his bike. Ask questions. That's the only way you'll learn.

I have always wrenched and welded and wired and painted my bikes. Because it's fun!

I rode at the back of the pack at every ride. I was the wrench. Some broke down. I would stop with them and fix. Half our mc could wrench....but I could fix.

Exactly why my newest bike is an Evo Road King with a carburetor. Easy to work on and reliable. I know fuel injection is more efficient but its computer controlled and subject to needing the software to diagnose problems. 15 years ago I bought a tire machine. Its invaluable since I have three bikes. I support my indy shop by buying tires,oil and parts from him. Looks like some nice improvements on your old softail.

I worked on Harleys for years at dealerships and chopper shops and I found that most dont know shit about their bikes>

When I lived in CT I used to go to my cousin's shop and I would do things for him and he would help me out and show me things on my bike. I would mow his lawn, cut down trees, split and deliver cord wood to him and even do oil changes and tire replacements on his customer bikes and he would do some stuff for me on my bikes. Now I live near Cleveland and no more nice cousin to help me out. So I have to man up and do it for myself or get out the checkbook. I usually choose man up as much as I can. The more money I save the more riding I can get in and maybe I can buy an new gun, I love guns....

Loved the Vid Brother.....old bikes will always have a place as long as dudes like you continue to love them.

Judging from the condition of most of the bikes I've bought, a lot of bike owners don't know crap about fixing or maintaining their rides. Kudos to those who do. Anyone who wants to can learn...especially now days with the internet.

You're absolutely right, know your limits. I rode panheads and shovels so I learned how to wrench when needed.

Self sufficiency & eternal vigilance , will keep your knees in the breeze !

There is an old book, published in 1974, called "Zen and the Art of Motorcycle Maintenance", and it is a really good read. As for myself, I have always been a mechanic and motorcycle rider, and spent many years working in bike shops. I think the most important thing is, once anyone starts riding, they get increasingly interested in the bike itself, and most learn a lot about the care and feeding of their own bikes. They will still have a shop install tires, do tuneups, etc, but only a few of us rebuild the engines and gearboxes, and make major modifications. At any gathering, however, there will be LOTS of technical talk among riders, and most people know A LOT about what they are riding.

I own a Harley Davidson heritage flstc. I’ve owned many bikes and I see this one as the one I will keep. Evo 80 cu. inch. Not fast but will run all day at 50-60 mph. Bike fits me well and the bike is carburated. The wife has a 2002 springer softail which was a gift from her dad. We will eventually trade our 1999 gold wing for a new gold wing or a ultra classic and those will be the bikes we keep. Great video. Make your life your own. God bless

Thanks for your videos! I started watching with your trade and continued as you made some repairs. I am enjoying watching and really admiring your work and how you approach each task. You explain everything in straightforward, understandable terms and free of colorful language. I have wrenched on my cars, never did any major engine work, but worked on everything else I could succeed at. Still, do but not as confident with all the new electronics. I dont work on my bikes, (2004 FATBOY/2016 Ultra Limited low.) I just dont know how to. I have the service and repairs done at the local shop. Regardless, enjoy riding. It is my therapy. Again, Thanks for sharing and keep posting. Lou

I do sone of my own. Oil change, clutch adjust, brake adjust, small wiring jobs, tow hitch install, road guard install. I like doing my own stuff, but I stop at my local shop too. I like hanging out and throwing them work to help keep them in business.

I wish I could work on my own bike but I fall into that group that takes it to the shop. I have done items like adding lights or changing seats but not much more. Thanks for all of your time in getting these videos out. Ride Safe

Some people just aren't mechanically inclined, I don't hold it against them. If they have someone else work on it but love to ride, that's good enough for me.

I had to learn to work on my own bikes when I was just a kid. When I grew up, I worked hard, saved some money, and bought a well-used Harley that I fixed up myself and have kept her going for the past 20 years. I couldn't imagine letting anyone else work on it. Great bike and even though I want to find an older evo soft tail now, I'll still keep my other old Harley, no way I'd ever sell it as long as I can still ride.

I totally agree with you on that! There is nothing more satisfying than fixing, or building your own stuff! Great video man!

I wrench on all my bikes and my car! I have been doing it since learning from an early age through trial and error, taking engines out! fitting new gearboxes, suspension etc in old Fords from the seventies and eighties! I enjoy it knowing my back wheel is tight and secure because I have done it myself! A famous Irish Road Racer Joey Dunlop always prepared his own bikes! It gave him the confidence to ride around the famous Isle of Man TT race at breathtaking speeds! I haven't stripped an engine yet, but I have rebuilt a turbo! fitted a bathroom suite, built a wooden garage! Tiled a floor! learnt to weld! replaced an engine gearbox and running gear out of an old 1978 Ford Escort mk11 RS2000 into an older 1968 Ford Escort MK1 1100 Automatic! I like working on my bikes and do all the servicing myself! You can do most things! you need the tools to do it, and thoroughly research what it is you want to do, you just have to not be afraid to try tackle it yourself!

You’ve hit the nail on the head! My first Harley was a 1983 Shovelhead Sturgis 1340, which had a panhead adjustable sidecar forks and FLH swing-arm, plus every wire was in black! It was unreliable but interesting! My finest moment came at 1am on a dark night when it cut out, the starter failed, & the kicker went down but failed to come back up, so I set to & disassembled the kicker at side of the road! After a couple of hours cursing it kicked back up! A good feeling! Fantastic! Later a misaligned crank caused a small engine disaster so I swapped it in 1996 for a Rowe Machine Sportster. Whilst I’ve had new Dyna models since, that old Shovel is really where my interest remains as I could do stuff on it myself, & discuss it’s problems! I’m no mechanic but if you read about stuff, & get stuck in, eventually it becomes easier to work on.

About of the bikers i hang with do their own maintenance & repairs. Most of us seem to have "that guy" who we can turn to for info on the more technical stuff who is always willing to help out a fellow biker. I think the numbers are dwindling on hands on bikers these days. I don't have a problem with a guy buying a new bike & knowing nothing about it, after all it's about the ride, but i believe one gets more satisfaction out of knowing that you are the one responsible for keeping the machine on the road.

I'd rather a old evo than any of the new harleys nothing like em but each to there own nothing sounds better than a carb harley.

I really appreciate your videos doc. I find myself at a crossroad between old bikes and new for pretty much the same reason as you. I’m not a mechanic in the truest sense of the word but I’ve picked up enough from the old man and personal experiences to keep my scoots running and the thought of losing that ability with the new stuff makes me a bit uneasy. Thinking about doing some KZfaq “moto-vlogging” chronicling my experience with it as well. We’ll see... Keep up the good work.✌🏾

Love your videos, thank you! This one took the words right out of my mouth as I spin my own wrenches and share much of your philosophy. Pains me to on the rare occasions to leave my scooter for anything outside my scope of patience or capacity necessary for certain jobs.

Im 54 , i got first Harley when i was 15 , a basket case 69 XLCR,, when i was building it over a 2 year span , all the old timers my dad included all said the same thing, i will sit with ya and tell ya how to do what your doing but they wouldn’t touch a wrench , they taught me you ride it you wrench it.. and thats what i did . My profession is a Harley tech at a dealership.. not only did they give me the knowledge to wrench my own ride , but they also gave me a trade , a way to support myself threw out my whole life to feed my family and get me what i need.. those days and sense of pride and wrenching on your own ride are long gone and lost on todays younger generation,, such a shame...now that doesn’t mean ya have to know everything either because i don’t either,, it was a different time back then and we got a sense of pride of building fixing etc.. our own rides ,, i personally dont care for this new world we live in , and i esp don’t care for the direction harley moco is going either ,, but hey thats a discussion for another day..

Rode most of my life but got scared off by highway “almost” right before retiring 11 years ago. Traded my scooter for a pickup and sold/gave all my stuff away. Now I find myself watching youtubes about bikes and all the stuff involving them. Really enjoy yer channel and subscribed. Thx man!

You had me hooked on this series....I watched all the vids straight through, I like your style SaddleTramp. :D I have modern bikes, but like you, I to do my own work...I never want them to see a shop, I do as much as I can figuring it and learning as I go. I bucked up, bit the bullet and changed my Victory's wheel bearings last fall and I have yet another set of tires to go on any day now....The jobs aren't so bad once you do dig in and do them. Thanks for the great vids

Although I love old vehicles with ancient technology, there is one thing I do like about this digital age that I sure didn't have when I had to learn mechanics (and other things) the hard way, and that is KZfaq videos. If I'd had KZfaq and Google and forums available "way back when", I would have been in heaven. It has accelerated my learning ability to warp-speed. Growing up in a tiny town in the hills of West Virginia before the days of cable TV - or even color TV - was really hard for those of us with a thirst for knowledge. Still, I was able to work on my new-to-me single cylinder Honda and "Twingle" Puch/Allstate. Add to that a British car with Lucas electrics and there was no choice but to learn how to fix it myself. Am I complaining? No, it made me appreciate the fact that I had learning skills, no matter what. Today I am retired and when I want to fix something, I head to Google, KZfaq and forums to learn from other people's trial and error. This really helps me to "learn my limits". I appreciate all of you who like to share. Saddle Tramp, as always, thanks for your videos and insights.

You just keep wrenchin Saddletramp...We don't need no shops and NO COMPUTERS for our Bikes! Only thing I use shops for is tires and if my Bottem End were to go out on me....Happy trails!

Amen to that Saddle Tramp. I have a 2001 Road King that I plan on keeping for a long time.

I used to wrench when I was younger & my body wasn't beat up. Many people give up when they get to my age 61 & physical problems develop. With my problems, on paper I shouldn't do most of the activity I do but I'm NOT A QUITTER. I'll be 62 in 7 months, I have disc issues in my spine & neck including a slipped disc, my shoulder joints are shot, my feet have pain like tooth aches I could go on & on. I'm not on pain killers. I lost 109 lbs & eat healthier. I pray and meditate everyday. I DON'T judge how my day is going to be based on the first hour upon wakening. I need to keep moving and GET OVER THAT HUMP. ( most days it works) I love to ride, refuel, repeat. In the past 2 yrs I purchased a 2003 Springer, I helped build my 2003 Sportster Nor Cal style chopper & bought and customized a 2018 Heritage 1,868 cc. Both 2003's are carbureted. My passion since 11 yrs old has been motorcycles. I'll do whatever it takes to stay passionate. God bless.

Last summer I picked up a non running 78 goldwing that I'm trying to get back on the road. I'm no mechanic but I love to work on stuff and tinker. I ride a 05 sportster as my daily driver. I love bikes, and want more of them. Great channel.

I had a 2009 super glide but traded it on for my dream bike a 2000 fxr4 Evo in screaming yellow buil buy the cvo part of Harley all hand built no problems ran Mobil one 15w50 no leaks the Evo was always kept cool and it only had 7000 on it when I bought it back in 2009 and it now has 12000 I'll never get rid of it no need for a new one God bless you brother

Great video Tramp. Your channel is gaining traction well deserved. Your vids have a great vibe to them.

25 years young right here, started out with Japanese sport bikes, and don’t get me wrong, I love them but when it came down time to fix it I was lost. Bought myself a destroyed, rusted out ‘85 Ironhead Sportster and this thing is a breeze to work on. Chopped off the tail and welded a hardtail on, front moto iron springer, spoked wheels etc. Thing is an absolute beast and a blast to work on

About knowing your limits: I had a "slight" problem that should have been easy to fix. After a couple of days of trying, getting frustrated, walking away, coming back , trying again and repeating this cycle several times, I decided to take it to the local Harley dealer/garage which was the very last thing I wanted to do. But I figured if it requires certain skills and replacement parts, it would be worth it. The initial fix took over 6 hours and it failed horribly. I was 2 hours from home, across the mountains, and had no way to get there. The service department arranged with the sales department to get me a brand new loaner for the ride home. On the 9th day, they called and said my bike was ready and I rode the loaner back to get it. They said they had no idea what the root cause of the problem was, so they replaced ALL of the parts and there would be no extra charge above the 6-hour repair and even that was reduced. They probably "ate" over $2000 in parts and labor and they never gave me any hassle or runaround. They treated my old 2005 Sportster as if it was the most expensive bike they ever sold -- and I didn't even buy it from them. I've never bought a new bike in over 55 years of riding! In this case, "knowing my limits" paid off in spades. I'm happy to report that not all dealerships are "stealerships".

I'm all about old bikes and trying to learn to wrench on them. I don't think I'm that mechanically inclined but I used work on my own cars all the time so I have the want to get my hands dirty again.

Changing Motorcycle tires is easy .. You just need a stand to balance them on or have them balanced after you have changed them. I bought a Yamaha FZ-07 .. I mounted side Cases, a Top Case.. I cigarette lighter USB Jack and a GPS unit.. and a tank bag that clamps on to a bolted ring.. I had to adjust the chain a few times when it was new.. Being a Yamaha I did not think there would need to be any maintained until I hit 7,500 miles.. Then I hit a Deer.. Now I have to replace the Forks Radiator and a bunch of small part.. I don't miss Carbs at all , but still have not spent $450.00 on a fuel controller that I can adjust with a lap top ..

Your probably the third motovloger who has talked about people trying to be like them lately. Best thing you can tell them is what you said best person they can be is themselves. I've always done the same and fixed what I can and sometimes even fixed what I didnt know I could.

If I can do it myself and save a buck, I’ll be damned if I’m going to farm it out. I wrench on everything, not just bikes. Refrigerators, to box trucks and everything in between.

I ride and I wrench on my cycles it is a great feeling of satisfaction

You found yourself a new subscriber ! Bought my first harley 2 months ago, 01 wideglide absolutely love it, cheers from Canada !

Jesus taught us to watch what we say....you're in your right mind and you make great vids.

It's like this. You do all the small stuff. Belt replacement, swingarm bushings, get the wheels off and do the tires, breaks, oil, sheet metal work, paint, and I normally leave the internal engine stuff to the pros because. 1. I don't have all the specialty tools and 2. I don't have the time. If I was retired I would probably do more but it's like an algebra equation. I only have so much time on one side and only so much money on the other side of the equation and I do what I gotta do to make it all ballance out.

1st time viewer. Totally enjoyed it. You seem to be about just like a majority of folks out there who ain’t impressed with a bunch of bells and whistles. Ride safe ride free!

Just changed my tires on the 2007. Brakes on the back, new stator and regulator. I dig turning the wrenches as much as I like riding. Some of my best riding buddy’s don’t turn wrenches. They’re still full bikers.

Back in the day I did all my own service work and was blessed to never have to get inside the motor. I did have some work done to my first "cruiser" that I needed special tools for so I just hired the job out. My current ride is a 2019 FLHR which was brand new and I'm good to let the HD shop take care of it. I got a great service package with it so the only thing I pay is the upgrade for synthetic oil that I use.

You're always making great videos man, I truly appreciate it. My biggest limitation I've encountered so far is the carburetor... I just can't figure it out. Estou ansioso pra conhecer vc, será um grande prazer! Ainda estou esperando a confirmação das férias...

Amen! My 96" is largely over my head! But exhaust, tuners, plugs, air filter systems... even now some stuff is common sense!

Your channel came up as a suggested video. So my first view was your "straight swap". I usually scroll through a few videos to get a feel for what people are saying. I consider myself a motorcyclist not a biker. I have been riding for 8 years now. I'm not a HD guy. Although I do appreciate the natural sound and looks of a well tuned and cared for HD. Well any motorcycle for that matter. I ride a 2000 Honda ACE and I try to do most of my general maintenance myself. Unfortunately I will never be that guy who takes my heads off and adjusts my lifters. Maybe someday I'll have to attack my stator. As I've logged 135k on my wheels since purchasing her. Anyways. I've liked the feel of what I've seen so far...no "brand arrogance". You just like what you like. So I have now subscribed. I'm not a motovloger myself. I'm not that interesting of a character for that. My few videos are just a way to show I'm not a troll. #RideOn

Scooters is C-O-O-L. We have a great local shop like that here in Jamaica Plain MA called Milwaukee Iron. You put some nice touches on that Nostalgia Tramp, esp the blackwall tires...you saved that bike man, she was goin down the road of degradation....but she looks and sounds happy snappy now

I bought my last bike brand new, the first set of tires I put on it I just took it to the shop and had them do everything, after seeing how much they charged me for labor I decided never again. When it came time for tires again, I borrowed a bike jack from a buddy and pulled the wheels and just had the shop mount and balance the tires for me. It was a lot cheaper and I got the satisfaction of doing it myself, plus I took the time to clean everything up check the brakes etc. it actually ended up being almost a partial rebuild. And after it was all done it was like I was riding a new bike!

One thing you might want to check on the EVO is the inner cam bearing. If the cam has been changed they should have changed the cam brg, also. But, you never know. They came out with a caged roller which some came apart and when they do you know where all the pieces go. Good for a complete engine rebuild. Anyway, I changed out my 99 at 23.000 miles just for piece of mind. I used Harley adjustable push rods and replaced the bearing with a Torrington full roller bearing which is what the early ones had like the Shovel had. Took me about a day but I am slow. I now have 57,000 without a problem. I remember as a 15 year old kid, the throw out bearing went out on my 42. I spaced it with washers behind the mouse trap. If you never owned an old Harley with a foot clutch, you do not know what that is. Washers to space it with a little oil, and the clutch worked fine.

I changed my own tires , mainly because they were the wrong rating for the weight of the bike . The stickler was getting the balance beads in the tire stems .

Awesome video. I am the same way my brother. I own a 1985 FXRS restored it myself except for tires and engine assembly. I didn’t have the confidence to do the engine then but do now. I put a kick start kit in it and it’s my favorite bike I’ve ever had. S&S carbureted with high four ignition and WOW I love this bike!

great video ! I really respect your honesty on your limitations and comfort zone on what you can and can not do when it comes to working on your bikes ! I am heavy truck mechanic and Wrench for a living . I don't know what you do for a living but from what I can see in your videos , you know your way around a bike . Keep up the good work !!!!

Always appreciate your video content and words of wisdom. Your a solid down to earth guy who most of us viewers can relate to.

I just got done doing a complete service on my 02 FLSTC who was the smart guy who thought putting the fuel filter in the gas tank was a good idea

Thanks for sharing your day and knowledge with me. Be safe

Old. Olde school. Air cooled. Carbureted. No computers, no silly 'power modes', no onboard music, no ECM, no FI, no liquid cooling. Just me, some rubber, and an engine that I'm not afraid of. Mine has a stock Mikuni and learning how to use it is definitely in my future. Plus all the other little ins and outs. My favourite line, and I think it was yours, "If I'm broke down in the middle of the desert, I know that I can fix it." And that's just the way I want to be as well. Leave the shop only the sophisticated or milling type work, and leave everything else to me. Might have them change and balance those tires too. So much easier on a machine.

Grew up learning how to work on my own stuff with my dad, I can now afford to have work done but what fun is that.

I learned to wrench I can't afford the Harley Shop.

For me I grew up doing my own services with everything I've driven though what is intimidating for me is carburetors... I picked up my bike brand new so that I wouldnt have to wrench on it all the time and I wanted something fuel injected so I could diagnose with a tuner or computer. Great video man, I agree, wrenching doesnt making you a "real" biker... everyone has different skill levels and limitations. We all cant have a decked out shop in our garage and even then sometimes its better to just have the professionals take over.

Watching the work & changes you've made on that evo almost makes me want to swap my 2013-103 street glide for the same setup you now have, that evo sounds incredible ")

I cringed when he laid that rear wheel pulley side down.

awesome shop, we have a great local old school shop here in Arkansas called Howlin Cycles, good times!

My father and four of his brothers owned an automotive repair shop,my brothers and I started wrenching in our early ages . I joined the military and wrenched on numerous aircraft Kc-135A,B52G,C141A/B C5A,B & M,retired and kept wrenching on my passion,VWs...Dont know man,you think i could wrench on a Harley.

In 1969 I bought a 650 BSA and couldn't wait to lay a wrench on it to see how it works. Been wrenchin ever since. Doing repairs on my 2003 Road King, so far 89,600 miles. I hope it'll keep running until I can't, but if I was younger I'd be considering a magneto and carb conversion. But hey I aint. RIDE ON

I have been around bike since I was about 10. At that time I had a dirt bike and always worked on it and keeping up the maintenance on it. I love working on my two Harleys that I got now. I need to start learning about how to work on the engine more now. I love to ride and I love to wrench it.

After you put the wheels on and put it outside to warm up I had to laugh. My friend has a 2001 HD like yours and anytime we did a trip she had to warm it up for a while before she could go.

I started riding bikes in 1972. My first bike was a Honda CB450. I had it for two years and then I got of riding for about eight years. I have a friend and back in the day he owned a body shop. He also rode a HD. He had a 1974 engine and tranny on a painted frame covered with a sheet. I came by his shop at least once a month just to mess around and that frame was always covered with the sheet. He already had a bad ass bike. After a year or so I ask him what was he going to do with the bike under the sheet. He said to me, go get $3500 and we can build that bike for you. Took me about two weeks and I had the money. So we started putting the bike together. He had all the parts to get the job done. I was there ever Friday and Saturday to work on the bike. What parts I did not know how to do, he did them. After a month and a half, we fired up the bike. I was so excited I was like a kid a Christmas. It was a plane Jane Shovelhead but ran like brand new. I rode that bike for several years and later traded up to a 1980 Police Shovelhead all stock. I have owned bike ever since and up until a could of years ago, I stopped turning my own wrenches. If you can't make minor repairs to your bike, you need to stay in the car. Safer that way. Plus the enjoyment of doing your own work. JS By the way, I was poor as hell. That bike was the only transportation I had for at least two years rain shine shit or snow.

Hi, I just started subscribing to your channel. I have a '96 Heritage Softail too, and I'd like to ask if you could do a quick video on attaching and raising your bike on your lift. I have a drive on lift, but no room for it in the place I'll be working on it this winter. So I'll be using the same type of chassis lift in your videos. All the best, Art....

you prob already figured this out. My '91 evo softail with a dyna ignition and hi flow mufflers gets 175mi on a tank before reserve. It has run 20w50 for 70,000 mi .I have used my trip odometer for a gas gauge for years. This works so well that I use it on my '05 Heritage even though it has a gas gauge (worthless), by the way my Heritage with a CV carb HD hi flo mufflers gets 200 miles before reserve (??)Another thing I found I had a lot of noise on the evo that I couldn't find that ended up being my tank mounts were tired. When I went looking for the buzzing sound I pulled the tanks (5 gal) and my throttle cable had the plastic worn off 1 Cable with a shiney place on the tank. Replacing the rubber mounts solved the problem.

I came across your channel today and I’m really digging it. Keep up the good work!

I know I do my own stuff; Never had extra $ to pay someone and never had a pleasant service experience. “If I have to pay someone and stand in line and wait ; I’d just go ahead and do it myself “. 🤠❤️👍🏻🤠👌👋🏻 Besides it’s better knowing your scoot anyways on the road . I was up at sturgis in a cabin; the guy in the cabin next door had an easy up over his bike with a cover on bike. I told him I changed my own oil before coming . He said; “ you changed your own oil !!!” I said ; yeah; and I changed my back tire too . He said : “you changed your own tire !!!” Meanwhile he polishing his bike with cover and easy up over it . Hmmm- Well ; there’s all kinds out there-

I do what I can, wish I knew more.......But..... I can build my own home from footings to placing the lazy boy recliner. Concrete, block, brick,framing,structure design,,shingle,siding, elec, plumb, You name it in residential building, I have the know how. So I lack in my mechanical skills but have the ability thru You Tube to take on those tasks if I choose too. Carry on.

Great video and so true, I actually started with learning to fix my own bikes with the tires and bearings haha but with books and youtube I can't remember the last time I had to leave my bike in to shop.

Cool videos . Just subscribed and can’t wait to see more. I like the live to die die to live patch! God bless

Bring a biker doesn't hang on whether you're a mechanic or not. To me being a Biker is about the feeling you get being on the road. The feel of the bike throttling through the gears, the wind in your face, the smell in the air as you ride. The feeling of independence as you ride. I'm able to change my oil, coolant, brakes and plugs along with the final drive gear lube. Other than that I'm limited in skills and time. Don't think that makes me less of a Biker... Ride On Saddle Tramp...💯

I’m not mechanically inclined at all but my neighbours both rode motorcycles and I learned to do some basic maintenance on their motorcycles, like oil changes, installing new windshield. The neighbour two houses away his Harley fell over in the shed he puts it in. He came asked for help, getting it upright. The windshield was caught under a shelf and it snapped, after I got the bike on it’s wheels. He started bitching about the windshield which was a accident. He was being a prick about it, I told him I can put it back on it’s side. He stopped bitching immediately.

Love the video, Saddle Tramp. Like you I prefer older bikes. Looking forward to seeing the video from the meet up. Safe travels, y'all.

I appreciate the vids. I'm looking to get a cruiser. I commute on a 2009 Tiger 1050. I dig it. I have worked on my own dirt bikes/ dual sports for the last 30 or so years. The tiger was my first real street bike (had it for over a year now) and I'm looking for a Cruiser. I've been drawn to the road King. But new or old? Or an 06 Yamaha Roadliner.....not sure. But id like to wrench on a Harley. I was impressed by your decision to trade the 12' to an EVO. After all I've read and watched on Utube I think that is where I am going. And I think you are right on the "disposable" twin cams. Great stuff and insight on digging motorcycles. Keep up the good work

A friend of mine gave me a '77 XLCR. Needed a few things, but I'm collecting parts to get it going again. Still need a carburetor, and a new caliper seals. Biggest gripe is the Harley manual is severely lacking on detail. I'll get it sorted eventually.

I admit that I can't tear down and rebuild my engine but I just assumed (dangerous word) that Harley owners were all DIY people to some degree. I figured it's just normal that if you like to ride a somewhat primitive bike that you want to do all of the basic maintenance yourself, like tune-ups, wheel changes (even if you don't change the tires), adjust carbs, and even do small mods to improve performance and reliability. Well, I was wrong. This may have been the case at one time but when I hang out at the service department of the local Harley dealer, I am amazed at how many people bring their bikes in for the most basic jobs that I knew how to do in high school and that was over 50 years ago. Wrenching on your bike is just part of the ritual or in my case, "man therapy" in the "man cave". I enjoy it! The times, they are a changin'.....

Hey guy I've seen a few of your videos as I'm into the older bikes myself. And if your limitations are tires and wheels bearings then your pretty much set. Let me tell you though Tires and bearings couldn't be easier to replace I the garage . I do all of my own repairs and have never had any outside help on any bike I've owned unless it's machine work. I didn't ride for about ten years then out one day I seen a FLH at a yard sale. Very clean machine and loved the color of it. Wasn't what I really wanted but the price was right and I wanted to ride again. I've had three back surgeries among others and have arthritis pretty bad but I can still ride in comfort . Doesn't affect me thank God and I couldn't be more happy in my element in the wind... Anyway bike was an 01 FLH TC88 twin cam. Fuel injected, computer, sensors, belt drive, newer machine. It ran great, smooth ass ride but it just wasn't me or what I wanted. Went through three sets of tires, TPS, air intake temp sensor, head temp sensor, crank sensor, intake seals, rocker lockers for noisy ass valve train, fuel tuner, etc.. I did a lot of work to that ride and it was a nice cruiser but I don't like modern bikes with newer technology!! Can't stand it!! Again yard sale, clean, price was right... Anyway I looked the entire time I rode it for an older machine and after three years finally I found what I was Looking for. Now I own a 73 FLH Shovelhead and absolutely love this machine!! This bike is all me. Its an older ride, much lighter, easier to maneuver and handles much better than the 01 which surprised me. And the sound of a Shovel is it. The bike was rebuilt seven years ago and the cat I got it from only put 400 miles on it. Well after owning it a few months it needed a lot of fine tuning not to mention freshening up with new seals and gaskets which I'm doing in the spring. The man that built it passed away and it went to auction and was sold along with seven other older bikes. I believe it was assembled and then he died as EVERYTHING was out of adjustment!! I literally had to adjust everything that has an adjustment but now it's like an entirely different ride. It's far from stock but I like how it's been done. Suites me well. Can't wait till it warms up so I can enjoy being out in the wind. Nobody around here rides old bikes they are all newer rides. These days are different from my days of growing up. I drove 67, 68 Camaros, Chevelle's, GTOs as daily drivers to work with big block four speed trannies pulling the front end off the ground and raced them on the weekends. These days are so different. I'm old school all the way myself. Anyway the old Shovelhead is a great motor it's got soul. I can fully understand the trade you did getting the older bike as i did the same. I also rebuild and run vintage chainsaws from the fifties to cut firewood. I just enjoy fixing things. I was an auto mechanic as a profession until I messed up my back so I been 🔧 my entire life. I still have all of my tools I bought off the tool trucks back in the early eighties I use on a regular basis. Three older brothers growing up in the sixties as a kid with muscle cars in the driveway everywhere turned me into a gearhead at an early age. Doing ones own work is pure satisfaction and gratifying. It's feeling good about rebuilding your own things and using them. If I couldn't work on my bike I wouldn't even own it. I don't want some other cats hands in my machine. Old Harleys are like a work of art to me. Anyway I can relate to you and how you think and doing your own thing, fixing your ride, digging the older bikes... I'll check out some more vids soon....✌🏻

Maybe next year if you ride up to Illinois you can plan a trip down the road to The Chief Black hawk meet in Davenport Iowa.August 29, 30,31. One of the best vintage motorcycle swap meets in the country. They also have vintage flat track racing, old bikes for sale, many old Harley and a Indian parts plus on site camping, food and many specialty part venders and leather crafters... on and on!

Indiana love and blessings to ya bro!!!! Love ur channel and what u do!!!!

Don't sweat it, just keep making repair's, riding and upgrade videos.

The 1998 Wide Glide I just bought is cold blooded as all get out too! I’m ok with it though, because that Evo runs like it’s brand new once it’s warm.

Loved your video/ Mississippi trip and few other videos just came across your channel the day you traded your 103 for a 88 ci. Just subscribed today and clicked the bell. You remind me of my dad he has the same hair style as you and same beard style. It’s pretty cool lol

I can relate. You just described why my Harley is an 03 and my van is even older.

To me, I want to work on my own stuff and no computer stuff. The new computerised machines may have their place but not under me. I can hear a bike and diagnose most issues. Give me a carb, kicker to back up the starter and give me a magneto over electronic ignition. All things break but I can fix the older stuff. God bless you bro.

I could say the same about homeowners. I build, remodel houses. I ride bikes. I don't put down those who cant build thier own homes or home Improvement projects ! It's best to know your limitations and let the pros take care of the things you are not proficient with.

every bike and car Ive owned I have learned to troubleshoot and repair most if not all issues that have come up since 1982,,,many bikes and many cars,,did I mention I dropped outta high school and never went to college??I did learn alot from Chiltons, Motor, Clymer and of course KZfaq! When other kids got their merit badge in cub scouts and boy scouts and played basketball and baseball, I was tearing apart motors and engines to see how they worked! I could read schematics when I was 9 and learned a ton about electronics from radio shack project kits 150 in one too!

Enjoyed another ride (video) wit-cha brother. I’m old school myself, but I had to have myself a newer scooter, so I bought me a 13model Road Glide, Sharp as a tack, I’ve done some upgrades and such, she’s even rigid,, yep struts on a RG! My ole 77 fl custom is my favorite, she’s rigid too, I enjoy maintainin it and the whole time Thankin the good Lord for her!! Yep, God willed her to me! Gods will!! Can’t wait to meet ya brother, I’ve been to scooters buyin parts myself. God Bless you and keep letting him use you in the way that he is.

I try to do all the basic maintenance, but take my bike to a pro for all the serious stuff. Nice bike I'd love to get one like it

Yeah man another great vid bro, I’m there with you on the REAL, how does a person learn to wrench or become self sustaining but by experience and some people THINK real BIKERS have to work on their bikes and I would say MOST Bikers do, but I’ll be the first to say I DONT KNOW EVERYTHING ABOUT EVERYTHING, but I like to turn wrenches and learn more about my vehicles, truck, bike, car ect. I will NEVER put someone else down for not knowing how to do something or categorize them because they don’t know! Keep them vids coming brother!!G.O.E.🙏🏻💯

Just like you, I do what i can... but I try to be honest about what I can't do and not get in over my head.

Man I'm with ya in being self sufficient. I've been thinking about getting rid of my 07 Streetglide and getting me a Evo myself. I'm on my second Twin Cam and I can't seem to get used to the sound and like you say these newer bikes are computerized and other things to the point most of us are almost completely dependent on the dealer or at least a well equipped shop with a whole bunch of technical experience to go along with all of that shop equipment.

i bought a 97 cust xl for that exact reason,, simplicity,, carb solid mount motor, turned it into sixties style bobber wouldnt trade it for anything love riding it and love working on it,, the new harleys are too tame! too computerized no soul lol im with ya on the old skool mentality just wish i still had an old carburated pickup truck GB