We ditched our turf tires about 10 years ago because we were getting stuck and tearing the yard to pieces. These tires work so much better and actually do a lot less damage.

WOW thanks for posting, been thinking how these tires would do in regular cutting....looks like it did just fine....

Good video. I have a simular yard and I think im going to give these a try. It's not too often, but I do sink in the wet season, in spots. Thanks for making this video. 👍

you just sold me on getting these. i slide way to much and was told those tires would tare up my grass and you just gave me what i needed to see

Exactly what I was looking for as to a comparison. Thank you!

That is awesome! I ordered a similar set yesterday. I am looking forward to receiving them.

Hell yeah! Thanks, just what I'm looking for! Thanks for sharing

Great video. You are correct. Ag tires don’t ruin grass. Thank you

Im so happy to find this video i have a bad boy to same problem let see how them chevrons grip !!!!!!!!!!!

Good video I have the same issues and back yard like yours. Going to buy those tires. Thanks

LOL that was awesome !! just making it up that muddy hill !! KICK ASS !! I need me some tires like that !

A really good zero turn tire for hills and steep ditches are knobby tires like the old 3 wheelers had.. Ag tires are ok but still have some side sliding.

Those are awesome looking! I have some sinister plans for these tires ;-D Thanks for the video!

Thanks for the video. Big help to me deciding on aggressive tires or not. I don't plan on mowing the small lake on my property,, so don't think I need "mud tires".

Awesome video, this is exactly what I needed to see. Never had an issue with the turf tires when i lived in Florida, but now that I’m working in the carolinas I’m tearing up everyones lawn from sliding down the hills. I’ve been on the fence about whether these would cause more or less damage

I have been running lugs on my SCAG for ten years! Love them! If you know how to drive your mower you will not tear up your yard. Just like you said! With them tires I've pulled cars and a 20Ft by 8Ft chicken tractor! Have a good week aXe!

Nice video, I just ordered a set of mud tires for my zero turn. I tried adding fluid to the turf tires and that was a slight improvement. I'm sure the new tires will be what I am looking for.

I drove my first Dixie Chopper for 20 years with the tractor-tread tires. Went through 2 sets. They are the only way to go in my opinion. You just have to take some time to learn how to use them, and just don't try the fancy, fast 180 degree blinding speed spinning turns like the sales ads show. I cut some serious hills and one wrong move and I am in the South Anna River. My new Dixie Chopper has the turf tires. They are horrible for traction unless you are cutting a football or soccer pitch. At the end of this season I will be getting rid of them and getting a set of the tire-treads. Great video. Thanks

I changed my 0-turn tires also. I went a little taller then aired way, way down to 4-6 psi. I'm at the same height and get a nicer ride and the balloon affect gives better traction than fully inflated. No 'hills' here but do cut a drainage ditch and also get a bit swampy around the barn. I went with a MaxAuto 22x11.00-10 Lawn Mower Tires, 22x11x10 Golf Cart Tires. Not your paddle tires... more AT design. Mine are 6 ply but now only list 4 ply. Stock were 20" tall. but they make a 23... I may go with them. I'm a bit hard on tires. I use mine like you use yours. ;) Don't forget to re-adjust your deck.

I got similar land as yours. No experience with ag tires, but plenty with turfs and r4's (industrial). Between the two, for me r4 tires all the way...for exactly the reasons you listed.

5:45 Love it I don't know why, but I am going to do it.

I have a Snapper Zero turn 42 inch and not safe of a hill with regular tires. I purchased a pair of Sunf ATV 20X10-8 tires. from Walmart. I have not yet got them on my mower but looks like you answered a lot of my questions. I do not want to end up in my creek, so if it was to hurt the lawn I could care less. Thanks for the view. I want to be able to turn and stop and get up and down the hill.

Yeah I’m going this route I had my mower slide on wet grass and I rolled the zero turn down a cliff to the pond luckily I was ok and the mower rolled off me the blades were running the whole time!

I like it… You’re nuts like I am! I have some pretty steep slopes that are unforgiving with the ZTR mower. My compact tractor has the AG Lug tires with a finish mower that is rock solid on them but the turf tires will ultimately lead to my demise if I keep it up. So great video, think this will fix my issues also thx.

I gotta change the tires on my zero. Not regular lawn type mowing on our farm and I like to mow the hill next to our pond. I was hoping you were going to show how to change those tires! Great video!

Great video. Mudding in a zero turn

Turf tires shred lawns. Love my Carlisle super lug tires. New tires provide the traction I need and don't pull the grass out spinning wheels.

I run bear claws on my z560x husky and it is an absolute monster. Hills, side hills, down hills, ditches, anything

Well, I'm convinced. Going to buy 'em. Tired of getting stuck in ridiculous areas of my yard that I shouldn't be.

Nice demo

no doubt, I already tried this with same type of tread on zero turn, I had to take a grinder and take the tread down to 1/4 inch

You sold me I will be ordering soon

I said hell with it, and got the sharp shouldered Carlisle tru power for the rear and super lugs for the front ( in my particular size the only option for the front was turf tire or super lug...) I despise turf tires with the passion of 1000 burning suns so I went with the latter. I will say though the tires were squashed in shipping so they deformed to the point I couldn't get all of them to seat so I soaked them in ether and exploded the bead on for a nice toasty seal... (note, I had to put them out because they were still burning for about 10 seconds or so lol) But hey, its always a fun project when shits exploding and on fire. Can't wait to go drag shit for no particular reason and drive up mountains.

I want to thank you sir

hahahaha shes not a swamp buggy brother hahaha cool vid !

Good video man. Can you measure the tires for their true height and width? Thanks

You were stuck but the mower was still moving I like those tires

"How to dig a trench with a zero turn." 😆

May have to give them a try. Like you said, if the turf tires are losing traction, you're already tearing up the yard.

I have ran them all on my superz. The AT101s are great going forward but worthless for backing up. So when your turning and push forward on 1 stick and backwards on the other (slightly) the tire running backwards will tend to slip. I still run them, but they are not perfect

Hey Axe, these types of tires are not made by the same standards as car tires. If you put 12psi in each tire, the diameter of the tires may be different. To property inflate these tires, you need a dress makers tape and a thumbtack. Anchor the end of the tape with the thumbtack as close to the center of the tire on one of the lugs. Wrap the tape around the center of the tire and bring the tape together and note the measurement. DO this for the other tire and adjust the air pressure until both tires are the same diameter. You will probably find the difference in air pressure is 5-10psi. The reason for this is if you have two tires with different diameters, it will pull to the side with the smaller diameter. I put more aggressive tires on my Bad Boy for the same reason you put those tires on yours.

I have that "paddle" tires on my mower. It helps with the bank, but.... still eats up the hillside.

Once yore in you are in. The lug will stop you from getting in. There's the next step up of the tru lug tire. The ones you bought are engineered to be on a zero or tight radiused mower.

Wonder if ya can put atv vampire grip tires on it ....serious cleats on those tires..like 3 inches tall

Been running these for 8 years on my Scag. Best improvement to any ztm. They should come from the factory with them.

Last weekend I switched to a brand new set of turf tires. I have far less traction on hills.

Awesome video. Lol

I’m going to try my old SXS rims and tires

I gonna get a zero turn- good call, I’m gonna have them put AT1’s on it

What size tire did you use?

They’ll put big places in your yard when it’s wet. I have a set and they rip yards up. Switched back to a regular turf tire and added 4 gallons of washer fluid in each one and It pulls just as good as the rough tread.

I remember when I looked at a grasshopper mower they had similar tires and when I questioned them they said they don’t slip as much and don’t tear up the grass. Are you still satisfied with them

Looks nice on a light duty, homeowners model zt. Curious how well those tires would work on a Gravely 260 zt. Much heavier, commercial duty machine.

If I can't get the same size tyre, can I use slightly smaller or larger and just relevel the deck? Any other issues?

Do you notice a difference in the ride? I've been considering going to ATV tires for the sole purpose of getting a smoother ride. Most of my lawns are pretty rough, beat the crap out of you rough. I recently rode in my neighbor's side by side. He drove the thing into my shop of which there is a good four to five inch rise from the gravel to the concrete. I expected a real serious bump, I have a bad back and these things affect me a lot more. Much to my surprise there was no bump. I felt absolutely nothing when the machine transitioned from gravel onto the concrete inside the shop. This is got me thinking that maybe I could go to a tire similar to that to get a smoother ride.

Link to product?

hey buddy did you have to take them to a shop to put the tires on they arre pretty stiff ??

I just put these on 4 of my mowers

AGs are nice but there is a getter tires I am going to get them and try them out

If your deck is acting like a plow, depress the big orange pedal to raise it up.

Good video but maybe bad advice for normal lawns, that one is fairly rough and seems well suited

Why did you go with a 21x11x10 I stead of a 22x11x10 like the factory tire?

How did you mount the tire?

Thumbs up on the tire tip bud, but go ahead and order yourself some new Spindles right about NOW! BB Mower spindles don't hold up and now that you have added a little mud and water those things just lost their life.

Glad you satisfied the SAFETY NASI'S😂😂😂😂

Fluid fill them for more traction

I have them and yes they can rip up a lawn 🤣

Buy an Altoz Tracked Zero Turn mower

I like the full send.... right into the thick of the mud.

We’re do u get those tires?!

I have the AT101’s on mine and would never go back.

How do they side hill?

I have a blade for my ZTR XMARK will these work for SNOW!

Won't keep rùñìmg par m in brake down

Why did you buy a 21" tire to replace a 22" tire I know it's semantics but you're going to screw up the height of your deck Did your mailing height change by an inch also

the only reason you tore up some grass is cause you were riding like a cowboy a bit lol

NASCAR changes tires with just a jack

Looks like the cheapest way to get more performance out of a zero turn. Good to know.

Is it a K or a Y turn 😂

Ok, I understand where you are coming from BUT, you wouldn't cut MY yard with those. HOWEVER, more times than not, it's the operator.

Uh, I think that's cookie dough, not mud. Have you tasted it??

Yes, they tear up your yard. They work great on pasture. I dont like to Y turn.

I have a Bad Boy Maverick. I bought these tires believing the hype. My 8 acres have never been more tore up. I am sorry I put my money in someone else's pocket for this.

Respectfully I think he is an amateur no lawn scape pro is going to use lugs for obvious reasons

Bad Boy mowers - awful beyond awful. Also you that puts more strain on your hydro servos...so something with a bit of lug, but not quite that aggressive is best. But in any case, lose the crappy Bad Boy.

Just shut up and take my money................... Please....