Doing a tune-up on our Honda 6.5 GX 200 pressure washer by changing the oil in the water pump & engine. Also, changing the spark plugs and cleaning the air box. Castro 10W-30 oil, throttle body cleaner, plug NGK B6ES 7432, SAE 30 non-detergent agent is what we'll be doing the tune-up with. Want to make sure it's a non-foaming/ non-detergent agent. The chemicals cause the oil to clean itself and water and foam cause problems when mixed improperly. We have the Karcher 2500 series pressure washer. Using an 18 mm wrench to loosen bolt in order to drain the oil. The sight glass helps you to see when it's all out. You can turn it on its side to drain more out and take the vent off the top. Remember to put the cap back on. The key is to fill it up level on the sight glass. Start up the engine to circulate it through and have to trigger pulled on the wand. Make sure it's still at level when it's operating. Fill to the dot on the sight glass. If it's too low it'll shut down. Cycle engine, prime the pump by pulling the string with no compression. Maintain it about every 3 months for the best performance. You get about 400 hrs on a pump. This one has 1200 hrs. It costs $600 to rebuild; so it's a good idea to maintain it. You can see the difference in the color of oil between the old and new.
Please Rate, Comment, and last but not least, Subscribe!!! :)
SCOTTYS @ INSTAGRAM
/ scottys_fabrication
SCOTTY'S DETAILING KZfaq CHANNEL
/ scottysde. .
SCOTTY'S 2ND KZfaq CHANNEL
THE SMD STUDIOS
/ thesmdstudio
SCOTTYS @ LINKEDIN
www.linkedin.com/
SCOTTYS @ FACEBOOK
/ scott.pymm
SCOTTYS @ TWITTER

ERIC THE CAR GUY
/ ericthecarguy
SCANNER DANNER
/ scannerdanner
MIGHY CAR MODS
www.youtube.com...