Screw chuck from faceplate.

Рет қаралды 7,183

Tomislav Tomasic Woodturning (Dodir Drva)

11 ай бұрын

As promised , here is how I go about making homemade screw chuck from faceplate that came with the lathe....
Excellent way to hold bowl blanks and other cross grain stuff....
Enjoy
Dust collector AW153E
www.axminstertools.com/eu/axm...
Cartridge filter
www.axminstertools.com/eu/awe...
_______________________________________________
AFFILIATE LINKS
KS SCHULTE
MIDI 2 PLUS LATHE
ksdrechselbedarf.idevaffiliat...
KS BOWL GOUGE
ksdrechselbedarf.idevaffiliat...
CROWN BOWL GOUGE
ksdrechselbedarf.idevaffiliat...
KS SPINDLE GOUGE
ksdrechselbedarf.idevaffiliat...
______________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz/gurtool-pm-dut...
Spindle gouge -www.gurtool.cz/vretenovy-stru...
Calipers - www.gurtool.cz/hmatadlo/
Sanding pads - www.gurtool.cz/unasec/
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr/CBN-brusna-plo...
BENCH GRINDER
www.tobi.si/hr/Stolna-dvostru...
DIAMOND FILE
www.tobi.si/hr/Arbortech-diam...
CORONET REGENT LATHE
www.tobi.si/Coronet-Regent&tr...
SC4 CHUCK
www.tobi.si/glava-celjusti-SC...
______________________________________________
TELACK
www.telack.hr/shop/index.php?...
SANDING DISCS 75mm INDASA
www.telack.hr/shop/index.php?...
SANDING ROLLS INDASA
www.telack.hr/shop/index.php?...
Thank you very much for watching 🤗

Пікірлер: 52

@rogertulk8607 16 күн бұрын

You are always worth watching! Nice to see you using Square Drive screws, they're a Canadian invention you know.

@joepapalia-xs1ds 4 ай бұрын

What a great idea!. You are outstanding, my friend. I learn something new from every one of your videos. Thank you so much.

@tomislavtomasicwoodturning 4 ай бұрын

Honored to help out buddy, thank you for watching

@ShevillMathers 11 ай бұрын

I can see more wood turners using this sort of screw chuck, maybe three different sizes depending on the size of projects. Between you and Richard, and the ‘Fab 4, fills up my wood turning video requirements, knowing I am getting the correct information from professional turners. I watched a video by a self proclaimed ‘expert’ turner on turning a small bowl. It was hard end grain, badly struggled by using the wrong gouges and it was really a video on how not to turn a bowl. A beginner watching said video would be endangering himself by what was not explained, and likely put off wood turning. So pleased we have you fellows. Greetings from Tasmania Australia.👍😁🇦🇺🦘

@tomislavtomasicwoodturning 11 ай бұрын

Thank you Sir very much for kind words and support 🤗.

@claudettewoolley 11 ай бұрын

Great to see another Taswegian on here😊

@ShevillMathers 11 ай бұрын

@@tomislavtomasicwoodturning -The wood backing plate adds a great deal of support and gripping force for the work piece.

@ShevillMathers 11 ай бұрын

@@claudettewoolley I am a keen follower of Richard Raffan & Tomasic, also the other two of the Fab 4. I am in Cambridge-also known in astronomy circles world wide as the Southern Cross Observatory-Tasmania 42 South. Been a media source the past 45 years, newspapers, Film, TV, Radio, Public talks, Displays etc. Woodturning I have recently added the past two years-to my already crowded list of hobbies.

@claudettewoolley 11 ай бұрын

@@ShevillMathers Hi, I am down the Huon Valley, and only had a lathe for about 3 months, but loving it. So good to have quality video to watch and learn from.

@jameswhattam3945 11 ай бұрын

Great video. And I'm impressed that you know the word "smidge."😂

@tomislavtomasicwoodturning 11 ай бұрын

😂😂 I guess all those american movies without subtitles when growning up are paying off😉

@jameswhattam3945 11 ай бұрын

Next time you want to describe something that is off a little bit, use the word "skosh" (long "o" sound - also spelled as "scosche") and you will really blow them away with your knowledge of American slang.😂😂

@tomislavtomasicwoodturning 11 ай бұрын

@@jameswhattam3945 😂😂😂

@25is27 11 ай бұрын

Thanks Tomislav. I have just bought a new Charnwood midi lathe and will now use the supplied Face-plate to make a Screw-chuck just as you showed. Like you, I have no use for it that the Screw-chuck couldn't achieve. Excellent video

@tomislavtomasicwoodturning 11 ай бұрын

Thank you, glad to be of help

@MarklTucson 11 ай бұрын

Thanks for posting this. That makes total sense the way you put this together and made a quick project of it.

@tomislavtomasicwoodturning 11 ай бұрын

No problem, glad to help out ☺️

@9thousandfeet 11 ай бұрын

I made up a couple of quite small screw chucks for initially holding small offcut blanks to make little salt bowls and small boxes and the like. One is made from a small piece of stable hardwood turned so it fits precisely in a set of dovetail jaws and the other from a similar piece which I threaded to fit directly onto the spindle with a 11/4 x 8 tap. For small work they both work great for the initial hold without having to procure a faceplate. The climate here in the high desert USA doesn't have wild swings in relative humidity, so there's almost zero movement in wood once it's thoroughly dry, so both have remained running true for years now.

@tomislavtomasicwoodturning 11 ай бұрын

Many uses for homemade screw chucks and they can last a long time.... Thank you for your input😀

@Amybaumgart 10 ай бұрын

Thanks! Great video, great explanation!

@tomislavtomasicwoodturning 10 ай бұрын

Glad you find it helpfull 😉

@johnnyb95678 11 ай бұрын

Excellent details on creating your own screw chuck. Thank you!

@tomislavtomasicwoodturning 11 ай бұрын

Glad to be of service 🤗

@jackthompson5092 11 ай бұрын

Great idea for a simple wood screw for mounting blanks Tomislav.

@tomislavtomasicwoodturning 11 ай бұрын

My favorite way🤗

@oleksiypokotylo7323 4 ай бұрын

Thanks a lot Tomislav! My screw which has come with the chuck has been broken (Chinese quality) So this information is very helpful for me.

@tomislavtomasicwoodturning 4 ай бұрын

Glad to hear that sir

@richardwhisler5593 11 ай бұрын

Thanks again for your information! Thanks to you and Richard R. I'm using more screw chucks than faceplates now.

@tomislavtomasicwoodturning 11 ай бұрын

Awsome, thank you for supporting our work😀

@alainnoel2198 11 ай бұрын

thank you : always ready to learn.

@tomislavtomasicwoodturning 11 ай бұрын

Thank you Alain 🤗

@jayscott306 11 ай бұрын

I just picked up a few face plates for screw chuck and a sanding disk. Worth the few dollars to save a lot of time.

@tomislavtomasicwoodturning 11 ай бұрын

That is great, indeed they are great in that way☺️

@josephpotterf9459 11 ай бұрын

Thanks great ideas there.

@tomislavtomasicwoodturning 11 ай бұрын

Thanks 🤗

@KoHcTaHTuHAkuMoB 11 ай бұрын

👍👍👍

@tomislavtomasicwoodturning 11 ай бұрын

👍

@0BAMiiN 11 ай бұрын

Hi Tomislav, thanks for the video 🤗 We're doing it the same way, but my screw is running worse than yours, it's more out of whack 😅 Seems like you have a better hand to screw it in in 90 degrees 😅 Good thing it doesn't matter that much. Greetings 🤗

@tomislavtomasicwoodturning 11 ай бұрын

Important is that it works....😉 Thanks for watching

@richardmccann4815 11 ай бұрын

I have a welder, and my lathe has a 1"-13 spindle. I can buy hex nuts for cheap, and weld bars on three faces to make star-chucks ( my new word!) I will let you know if it works!

@tomislavtomasicwoodturning 11 ай бұрын

In the old days they would make lathe accesories like that as a thread size was common like bolts .... If you have the time and acces to those bolts that fit your lathe size thread go for it 😀

@timofeyzhukov-khovanskiy9173 11 ай бұрын

I totally should do this, I never use faceplate, even on largest bowls a midi lathe can handle

@tomislavtomasicwoodturning 11 ай бұрын

Its a great way to hold a cross grain work

@randycosgrove3608 11 ай бұрын

I've been using a wormwood screw with my chuck but it looks like a screw chuck is coming soon. Thanks for all your great videos. Between you and Richard I've gotten more good information in the last year than in the previous 10. On a side note I've been using a 1" round nose scraper as a shear scraper when needed. I saw your build video when you made the one you faced this blank with. What is the functional difference between using the shear scraper that you use and the round nose scraper that I've been using as a shear scraper? Thanks for any info you can provide.

@tomislavtomasicwoodturning 11 ай бұрын

Thank you Randy for kind words 🤗 I'll do a video soon on how I go about shaping and profile scrapers and why, but round nose is usually beacuse of the shape best for endgrain hollowing or bottom of small bowls.... Shear scraper has a right corner which you can use for scraping corners and the round over edges allow for easirs slide , and the profile of it allowes for easier shear scraping..... Hope that helpes, but I'll try to explain more in the video 😉

@pjseiber2774 11 ай бұрын

Was that a lag screw that you used? If so what diameter?

@tomislavtomasicwoodturning 11 ай бұрын

It was, It was 6mm by 50mm long

@stefkospancic4342 7 ай бұрын

what screws do you use to fasten the wood I mean thickness and length.

@tomislavtomasicwoodturning 7 ай бұрын

I go for lenght for screw to be 5mm below face , and thickness 4-5mm is more then enough

@Pabloos8634 3 ай бұрын

Bonsoir Tomy, j’ai exécuté le même support Avis que vous Mais j’ai le boulon central qui se devisse toujours auriez vous une astuce pour bloquer ce boulon ? Merci 🙌

@tomislavtomasicwoodturning 3 ай бұрын

Try using epoxy or you can cut a slot on head of the screw and bend a nail fromone side to other.

@Pabloos8634 3 ай бұрын

@@tomislavtomasicwoodturning merci beaucoup fallait y penser 👍👍