It's 4 colors, cyan, yellow, magenta, and black, all "process" inks specially made for the 4C printing technique.

A good brand is Union Inks Process inks

hi Marius. The Video is for demo purposes only we are not allowed to sell. Thanks for liking! =)

I see, thank you for your response, Great video by the way!

From other videos i seen 305 mesh and cmyk inks

@@scomo9255 anu brand ng ink na gamit nio??

its magenta and cyan, but it looks like red and blue because the density.

Yes

Krizalyn Oligario workhorse

I don't know what he personally used but I would use 230's on the Cyan, Yellow, and Black. For the Magenta either 230 or 305. Magenta tends to build a lot as you print so flesh tones start to look like sunburnt or like a "cooked lobster" so a 305 can help that.

jdadams77 is it okay if I use 4 , 305 mesh screens?

jdadams77 thank you for responding btw!

@@rodrigoramos3013 you technically can use 4-305 screens but I wouldn't recommend it especially if you are using a manual press. It is very difficult to apply enough consistent pressure to push the ink threw a 305 on a manual press. Using the 305 on the Magenta is only if you have to if you are trying to avoid the flesh or other sensitive pieces of the art from turning too red. Another thing you could do is increase the lpi for the Magenta from 45 to 55 however using smaller dots depends on if the type of emulsion you are using and if it can hold the dots. I personally use Ulano QX-1. It's fast-burning and very forgiving.

jdadams77 thank you for your help, do you have any thoughts on Green Galaxy Cryocoat emulsion? that is the one I currently have

you may send us email info@tshirtprinting.com.ph

yes