Sequencing Eurorack with the OP-Z TUTORIAL - Including Step Components!

Рет қаралды 7,074

Күн бұрын

It's no secret that the Oplab for OP-Z was kind of underwhelming, especially for Eurorack users. One of my pain points was the lack of step component support out of the box. In this video, I go through the basics of installing and using the Oplab module with a modular system, as well as how to configure the OP-Z to allow for step component support! It's my first time recording and editing a video like this (I promise I'll get better), so do leave a like if you enjoyed it, and leave a comment to say hello :)
Check out my links at: linktr.ee/moist_fantastic

Пікірлер: 43

@teenageengineering 3 жыл бұрын

lovely. thank you for sharing! 💛

@moistfantastic3772 3 жыл бұрын

Thank you for making such an amazing instrument :)

@mandodesmadre3109 3 жыл бұрын

this was the best demo ever for op-z + modular

@aaronweits 3 жыл бұрын

awesome vid! you can also link tracks without a computer -- say for example, the chord and module tracks together to utilize the step components (holding the track button + any track + the module track)

@ZakNicola 3 жыл бұрын

Could you explain this further or link to a source, I don't fully understand

@wurlinnawurl 3 жыл бұрын

@@ZakNicola how can he make it more clear? Do what he said. It links them

@MrNamaikisaru 3 жыл бұрын

I can’t believe I’ve just subscribed to a channel called moist fantastic but I’ve just bought an OP-Z with an OPlab and an O-coast. This is exactly the video I have been looking for. Thank you! Also, repeating what has just been shown for key presses is great. It saves me scrolls by back 15 seconds to watch again. Maybe everyone doesn’t need what you showed here but it has helped me out no end. Thanks again.

@moistfantastic3772 3 жыл бұрын

Hey glad it helped you out! Thanks for watching and subscribing 😊

@xlfph 2 жыл бұрын

this was soooo helpful. I've been looking for a way to use step components w/ the oplab output for so long. thank you so much!!

@sophiew.1499 2 жыл бұрын

Genius vid. I was wondering why I couldn’t use the step components on the module track but you solved my issue. Thanks! 💜

@PinkBoardProducts 3 жыл бұрын

This was absolutely killer material dude thank you so so much!!!

@christopher_ecclestone 3 жыл бұрын

Exactly what I've been looking for. Thank you

@moistfantastic3772 3 жыл бұрын

Glad it helped! Thanks for watching 😁

@bwest6275 2 жыл бұрын

Fantastic! Thank you for sharing 👍

@anaxagoras83 3 жыл бұрын

Thank you for that. I learned a lot. You rock!

@moistfantastic3772 3 жыл бұрын

No problem man! Glad it helped you out 😊

@zobbo123 3 жыл бұрын

Great video and VERY well presented from what I've seen so far. Many thanks for this. Going to be watching the whole thing and studying it in more detail when I am not at work! On an unrelated note, what's the speaker you are using connected to the 0-Coast ?

@moistfantastic3772 3 жыл бұрын

Thanks so much! I'm glad it was helpful 😁 the speaker that I'm using is the Xiaomi Mi Bluetooth speaker. Pretty cheap with good sound (gets all those bass notes and ambient rumbles 😉), and the battery life is quite decent 👍

@B0bZ0mbie 2 жыл бұрын

Thanks for sharing that info! So, could you please specify, what do I need to buy, for splitting stereo cable into gate + specific CV?

@GARBANZOTIME 3 жыл бұрын

Very helpful, thank you

@moistfantastic3772 3 жыл бұрын

Very glad you found it useful 😊

@nocallnoshow6878 3 жыл бұрын

Nice!

@marzbitenhaussen 3 жыл бұрын

great tutorial, thx

@moistfantastic3772 3 жыл бұрын

No problem! Glad it helped 😌

@mairinger80 3 жыл бұрын

Very smart!

@moistfantastic3772 3 жыл бұрын

Thanks! Glad it helped 😊

@misanonymous 3 жыл бұрын

Thank you!

@moistfantastic3772 3 жыл бұрын

Glad it helped 🙂

@jaguarvssnake 2 жыл бұрын

Thanks so very for much for this video. Following along with you - my midi port lights up if I choose midi on the output but I can’t get the gate/cv lights to show like you have at the beginning after installation. I know that’s not the focus of this video but do you have any idea why that would. E?

@MrNamaikisaru 2 жыл бұрын

Is the Oplab module switch still set to midi instead of Trig？

@chap2065 Ай бұрын

What about the OP-Z punch in effects through midi to the euro rack? Does that work?

@LateNightBeatsOfficial 3 жыл бұрын

That was hands down one of the best youtube tutorials I've ever seen. I'm wondering if the midi hacking trick can work to have step components on the video machine... 🤔🤔🤔

@LateNightBeatsOfficial 3 жыл бұрын

it does!

@moistfantastic3772 3 жыл бұрын

Nice one! Thanks for testing it hahahaha

@LateNightBeatsOfficial 3 жыл бұрын

@@moistfantastic3772 I'll be honest: this is a complete creative gamechanger for me when it come to the Z. Once again, huge thanks for the video!

@moistfantastic3772 3 жыл бұрын

No problem at all! Really glad it helped you, and thanks for checking it out 😁

@LateNightBeatsOfficial 3 жыл бұрын

@@moistfantastic3772 So, here's the twist (sorry for spamming): you can actually assign those channels inside the iOS app in the MIDI section. No need to go all the way into the json file... 🤯🤯🤯

@distorson 8 ай бұрын

How did you figure this out? cool :)

@casinomann 2 жыл бұрын

So what do you use the CV out for?

@EdoardoMarcora 2 жыл бұрын

I am thinking of buying an OP-Z to pair with my modular system. Has any of the updates to the firmware of the OP-Z made using step components in the modular track, without a need for the workaround you showed in the video? Thanks a lot for your help!

@moistfantastic3772 2 жыл бұрын

Hmm not that I know of, sorry! Though if plugging into a computer and changing the file is not convenient, turns out you can use a shorthand to link the tracks as described in another comment on this video: Hold track + one of the tracks you want to link to the module + the module track. Though I've never tried this method myself yet ☺️

@EdoardoMarcora 2 жыл бұрын

@@moistfantastic3772 thanks 🙏