Enjoy the journey! :) did this on my channel, glad someone is going to do a proper in depth series on this 👌 you will make more than 220kw easy 😎 I made 243kw same actuator, ebay 3582 though,14.1 1 /4 mile on a 40 degree day... you will go 13s easy. The power down low compared to a normal xr6 turbo is 👌
@BrowneysGarage2 жыл бұрын
Hey Ross! Have seen most of your videos on RIPIN, you've done a killer job and got some awesome results out of it mate. Certainly wouldn't say yours wasn't a proper series that's for sure, enjoyed it very much and was in no way saying I think I'll cover it better than anyone else, just differently I hope - we all have slightly different methods here and there. The more good Aussie content the better! If we can get close to or similar results as yourself as you say then I'd be pretty happy with it. Good luck with the future upgrades on RIPIN and the track Pulsar build mate 👍
@RossHollandAU2 жыл бұрын
@@BrowneysGarage thanks mate! Its been fun! 🤘 definately keen to see your build too! To be fair my videos are low tech compared to yours 🤣 that's why I'm happy your covering this.. I missed to much technical stuff.. anyways. Goodluck Browney! How it all goes smoothly :)
@dolts12342 жыл бұрын
@@BrowneysGarage Hey fellas, I'm going down this rabbit hole ATM, have just purchased everything needed after watching both of your conversions, what injectors do suggest as that's the last part I need cheers.
@dopo6662 жыл бұрын
"All the $1,234 dollar cars that are actually 20 grand" Boy that one hit close to home 🤣
@BrowneysGarage2 жыл бұрын
Scrolling and day dreaming on marketplace used to be so much easier, it kills me! 🤷♂️
@anikelly2642 жыл бұрын
Yesss!!! Hes back, thanks for more streams!! Ive been waiting for this moment 😍😍
@dan_demon832 жыл бұрын
Welcome back mate like all your videos
@GelusE052 жыл бұрын
LOL the 'Peter Garrett' got me hahaha
@BrowneysGarage2 жыл бұрын
I'm kind of pleased with myself on that one too haha. Thanks mate 👍
@JacobC-nx6ld2 жыл бұрын
I just got an na xt and this video make me happy
@beatrute26772 жыл бұрын
fukin awesome, brownie is BACK
@anikelly2642 жыл бұрын
Just what i was waiting for!!! Thanks Browney Garage!!
@stephen41852 жыл бұрын
Great to see you back
@BrowneysGarage2 жыл бұрын
Thanks mate, good to have something to share again 👍
@SS-rd6re2 жыл бұрын
Sweet
@douglaslee89902 жыл бұрын
Glad to see ya back
@BrowneysGarage2 жыл бұрын
Good to be back 👍. Thanks mate
@rubberbandman25402 жыл бұрын
looking forward to your video series mate
@BrowneysGarage2 жыл бұрын
Thanks mate!
@jakobrah41332 жыл бұрын
i genuinley appreciate your channel so much mate, keep it up
@BrowneysGarage2 жыл бұрын
And I genuinely appreciate people like yourself that help motivate me to keep working on these videos - thanks and hope you enjoy what we have coming mate 👍
@canerdogan34942 жыл бұрын
Keen for this series
@BrowneysGarage2 жыл бұрын
Thanks mate 👍
@mickholgate33472 жыл бұрын
Welcome back mate!
@BrowneysGarage2 жыл бұрын
Thanks mate, feels good to have another video to share. Hope you enjoy mate
@thicc12 жыл бұрын
Yessssss, I really wanna do this my self
@BrowneysGarage2 жыл бұрын
Should be fun, hope you enjoy what we have coming 👍
@ljaxxonmudgee2 жыл бұрын
yes, please keep this series coming. Besides, where's the fun in buying it already done and complete? Built not bought!
@BrowneysGarage2 жыл бұрын
Will do mate! And yep, I enjoy working away in the garage so happy to do it this way. Not always the best financial decision but at least I'm learning along the way 🤣
@KillaKook2 жыл бұрын
LWTS FUCKING GOOO!!!!!
@Bilal_El-Hassan2 жыл бұрын
Your a legend browney. Keep up the good work. Hope it all goes to plan and better
@BrowneysGarage2 жыл бұрын
Thanks very much mate that's very kind, and cheers for watching. Fingers crossed!
@Bilal_El-Hassan2 жыл бұрын
@@BrowneysGarage and get some sleep will ya 🤣 having owned a ba and now a bf, I do feel your pain. However I'm hurting too sold my turbo ute years back for 3k 😪
@brendonthompson45712 жыл бұрын
May not be a qualified mechanic. But it’s the backyard ones who are the best!
@BrowneysGarage2 жыл бұрын
Thanks mate, hopefully makes it more relatable at least for the average bloke like me - and it means there's plenty of mistakes to learn from too!
@brendanmatthys37882 жыл бұрын
Glad to have you back Browney! I've been keen as for this series :D
@BrowneysGarage2 жыл бұрын
Thanks mate, definitely still a work in progress but expect more coming over the next few weeks 👍
@MegaDrewz222 жыл бұрын
The map sensor has a different plug from n/a to turbo. If you grab a second hand vz four wire o2 sensor it has the correct plug for the turbo map sensor. With a re-pin it's cheaper than using an adapter loom kit.
@BrowneysGarage2 жыл бұрын
Handy, didn't know about being able to pinch that plug from an o2 sensor so thanks very much mate, sure that will help someone out. Have already picked up an FG Turbo MAP sensor which is meant to be a direct plug in to BA/BF NA plug, fingers crossed.
@dylandesmond2 жыл бұрын
Nice info, I decided to go with the centrifugal supercharger instead though.... And dual electric front drive
@cplbruiser82672 жыл бұрын
Most second hand ford turbos have been thrashed. That`s why people buy them to do just that. I have done what you have done so far to my BA Ute. But i will stay with the NA Barra and install a couple of slightly modified cams. Very happy so far.
@BrowneysGarage2 жыл бұрын
Yep, and if they haven't been thrashed then the price will be even higher than the already over inflated prices now. Nice, hope you enjoy the NA setup and pushing it further with the cams. I definitely understand anyone who takes this path, I've had plenty of fun with it.
@KaidenOZ2 жыл бұрын
sweet dude, might consider doing this to my 2004 BA, she only has 120k on the clock and your past vids have been helpful in maintenance ect. i am an old school backyard mechanic, but lost my license for over a decade, went from an 79 XD as my first car too the BA when i got driving again last year. when the local mechanic quoted me over 1200 for the rear bushes...decided it wa time to get working on cars again and the BA is a bit of a change from the old 302 clevo
@BrowneysGarage2 жыл бұрын
Yep, those quotes or figures that get thrown around normally motivate me to keep doing it myself too. Buys a lot of food or drink to go with any misery in the garage while you work at least! Enjoy the BA mate, not sure it will be quite as easy/enjoyable to work on as the old XD but they have their pros for sure.
@RyanMiller-ly4li2 жыл бұрын
Following along as i plan on barra swapping my patrol with an fg na motor and box then turbo it. Only aiming for about 300hp at a minimum anyway.
@BrowneysGarage2 жыл бұрын
Sounds plenty do-able with an FG motor and should be a pretty good thing once done - good luck with it all mate 👍
@craiggardiner29382 жыл бұрын
Good on ya mate screw the haters
@BrowneysGarage2 жыл бұрын
Thanks mate 👍
@brockmacckie99052 жыл бұрын
Awsome video bro very pump to see whats to come
@BrowneysGarage2 жыл бұрын
Thanks for the support Brock 👍
@brockmacckie99052 жыл бұрын
@@BrowneysGarage thx for great videos great see someone giving it a go at home like i trying to do even though i don't have any plans on Boost looking forward to seeing what u got planned 😉🤟
@jungofett2 жыл бұрын
Good to see you back. I have the same ebay intercooler as you. I upgraded from factory BA Turbo cooler and im happy with it. its no plazmaman but for the price I do think it adds value stock cooler liked to heat soak after a few runs.
@BrowneysGarage2 жыл бұрын
Glad to hear, comments I’ve seen elsewhere were a bit mixed but the few here have all been positive. I’m hoping it can be the same or just very slightly better, not hoping for too much but they’re readily available and we’ll priced so worth a go. So you think it helped with the heat soak a little?
@jungofett2 жыл бұрын
@@BrowneysGarage i don't have any evidence other than my right foot. But I had my BA Turbo for over 10 years before I upgraded the stock cooler. I'm running about 300kw wheels no issues with that eBay cooler. By the time I need a bigger intercooler I'm going to need a stronger bottom ect. I asked my tuner not to push my engine to much I wanted reliable street car with a good powerband. My 4sp auto has decided she did not like the abuse. So I'm going to rebuild it but I knew it was a weak point even had a transmission cooler on it but shes had enough. 200k plus km and a heavy right foot I think she did well. I did end up getting the shift kit that you did in your video but I was far to lazy put the button where you did but I really liked how you showed that it could be cleaned up.
@cameronwaltets41222 жыл бұрын
Good too see you back looking forward too see the mods always inspiring browney. I have an Au3 Fairmont Ghia but I can use the basics from you to upgrade my car
@BrowneysGarage2 жыл бұрын
Definitely some overlaps there with the AU, and they’re all just nuts and bolts in the end! Thanks very much mate.
@tubes-lut2 жыл бұрын
AWESOME! Hope this series takes off.
@BrowneysGarage2 жыл бұрын
Thanks mate, you and me both! 👍
@olly.f79832 жыл бұрын
Helping me and sooo many other people by documenting this! Thanks man!!
@BrowneysGarage2 жыл бұрын
Helping, or being a bad influence?
@shadquirk6072 жыл бұрын
Loving it mate, keen on the build.
@Gus_Davidson2 жыл бұрын
Are you now going to call it project ‘Midnight Oil’… yes I saw it😉👍🏻
@BrowneysGarage2 жыл бұрын
Legend, not sure if it'll get the name but just like the oils I hope to have plenty of the right noise from Peter out front soon... mind you not sure Mr Garrett would approve of much we do on the channel!
@MrKrueger882 жыл бұрын
Really looking forward to this project , and thanks for all the great videos SSI far 👍👍👍 . Best of luck , and may the horsepower be on tap and plenty 👍👍👍😁😊
@BrowneysGarage2 жыл бұрын
😂 Legend, thank you very much for watching mate.
@vlockley2 жыл бұрын
Can't wait to see how it turns out. Good to have you back
@BrowneysGarage2 жыл бұрын
Thanks very much mate, you and me both! Hope you enjoy 👍
@maxarndt80872 жыл бұрын
I’m doing the same thing on my territory at the moment aha
@BrowneysGarage2 жыл бұрын
Turbo Territory's are awesome mate, I'd take one any day! Good combination of comfort, extra room, bit more ground clearance and the turbo power to boot. Good luck with it 👍
@SHOCKcustoms2 жыл бұрын
Love this
@Sam-xl2tc2 жыл бұрын
Looking forward to seeing this build. Good to see you back.
@BrowneysGarage2 жыл бұрын
Thanks very much mate 👍
@Deano0842 жыл бұрын
Good to see! Looking forward to this project! Good luck!
@BrowneysGarage2 жыл бұрын
You and me both! Thanks mate.
@Martintheblackcar2 жыл бұрын
Looking forward to this. Thinking of doing my car too. Your videos are very comprehensive, so I’m sure it will help a lot of people thinking of doing the same. Thank you for your time and effort.
@BrowneysGarage2 жыл бұрын
That’s very kind mate, thank you. I try to balance detail with not being too dry and bogged down - results in the videos taking AGES to put together. Hopefully the results are worth the wait to people. Appreciate your comment and time watching mate 👍
@timjamieson41562 жыл бұрын
Looking forward to this series,I've got a n/a turbo set up in my xf Falcon pushing 270kw. The smile it puts on my face in great, you'll enjoy it mate it's very rewarding.
@BrowneysGarage2 жыл бұрын
Damn, would make for a very quick XF! Thanks mate, here's hoping.
@hcfcustoms2 жыл бұрын
On ya Browney!,am considering doing this myself as I have most of the parts needed. Will be watching keenly.
@BrowneysGarage2 жыл бұрын
Nice! Here's hoping there's plenty of parts floating around for some time yet for others too, they used to be everywhere I looked but seem to have slowed a little. Good luck with it if you do mate.
@DWSF9892 жыл бұрын
been waiting on this for awhile now 😍👍
@peterspozetta94452 жыл бұрын
Glad to see you back, looking forward to seeing how this goes. Love your videos keep being you it is great.
@BrowneysGarage2 жыл бұрын
Me too mate. Thanks very much, glad you enjoy/can tolerate the bad humour along the way!
@samadams94012 жыл бұрын
Looking forward to the next video!!! Love your work Browney.
@BrowneysGarage2 жыл бұрын
It won't be too far off at all mate, thanks for watching 👍
@glensgraphix2 жыл бұрын
Looking forward to this. Great you have merch too.
@BrowneysGarage2 жыл бұрын
Thanks Glen, glad you're here. Merch has been a whole minefield of it's own, but I've done what I can to screen the company we're working with and I've been very pleased so far. See how it goes before committing further - fingers crossed!
@matthewkeim68402 жыл бұрын
Mate everything you said is exactly right. I have been buying parts for my ba xr6 for the last 12 months. I have been very lucky, I ended up buying a Spartan gt3584r turbo which just happened to be on special for 1040 dollars, compared to 1600 dollars normally. I researched my turbo for a long time and it is a good snail. I bought plazmaman cold and hot side 3 inch piping and a intercooler that wasn't too expensive. I also got 650cc injectors and I bought a turbo ecu on line. The seller ended up being a mechanic with his own shop. He also tuned the ecu, and I asked him what sort of power I would be getting. He said that it would be putting out 550hp. I almost pissed myself. But my car is not a skid car or a drag car. I would be a bit careful with the dyno machines. They rev the poor old car 2 , 7k. Pcm flash tuned ecu is just about as good as any dyno. As long as the tuner knows a lot about the car. He has a 1200kw ba xr6 himself. Anyway mate I'm getting the shits with all the haters 2
@BrowneysGarage2 жыл бұрын
Sounds like a good thing mate. And i agree with you on the tuning side to a certain extent. Let's be honest, the OEM isn't tuning each individual car! But once more variables/non stock parts start creeping in and the age of these things are getting up there I start to be a little more on the cautious side. Especially with good tuning shops becoming much more available and prices not completely unreasonable, I'd rather have it ticked off and reduce the chance of a new engine having to be thrown in! Certainly not saying you've done the wrong thing, sounds like you're all over it and hope you enjoy it 👍. Oh and don't worry about the haters, there's not that many they just like to be the loudest sometimes haha
@matthewkeim68402 жыл бұрын
@@BrowneysGarage yeah I was thinking about doing the bottom end. But it is a really good motor and I haven't had any problems with it, and there isn't 1 leak on the entire car. It was basically a barn find. Once I cleaned the entire car it came up really good. I was looking for a long time but. I told the tuner mate exactly what I am doing with the barra. He talked me into it. He warned me about doing skids in it. That's the main reason they fail. How could you do that 2 a beautiful old girl
@jungofett2 жыл бұрын
Mate sounds like a good build but you will not get 375kw/500hp out of 650cc injectors going to need 1000cc unless you want to max out your 650 duty cycle. you will also need a fuel regulator and a pump if you are going springs for that power you also risk bending the rods or lifting the head. NA have weaker rods than turbo but Green top gas engine have better rods for LPG. also not recommended to run that kind of power through a stock transmission. anybody can push an engine but if you want something reliable its going to cost you a bit more. don't listen to me or the guy who is selling it call up some shops and ask. Not hating just would not like to see your hard work go to waste.
@Blakenelso2 жыл бұрын
Just found your channel recently, and absolutely loving the content! Keep it coming!!!
@BrowneysGarage2 жыл бұрын
Welcome, hope you enjoy what we have coming and thanks very much for watching mate 👍
@dazzamac702 жыл бұрын
Welcome back mate, really looking forward to this series!!!👌
@BrowneysGarage2 жыл бұрын
Looking forward to it as well... maybe not the work left to do but the results at least! Thanks very much mate 👍
@alijahkania2 жыл бұрын
Bout time your back! I’m keen for this series as I am following along with a bf green top that Im converting and will be doing most of the mods your doing
@BrowneysGarage2 жыл бұрын
Sounds great! Good luck with yours mate 👍
@paulmcgaw69762 жыл бұрын
Really looking forward to this build!! Go get em' Tiger!!
@BrowneysGarage2 жыл бұрын
You and me both! Thanks mate 👍
@driftorcircuit2 жыл бұрын
Welcome back mate. Keen to see your progression and improvements.
@BrowneysGarage2 жыл бұрын
Thanks very much mate, excited to see how this all turns out now.
@gazwaldofetonsville1152 жыл бұрын
Looking forward to this series. Wish I could give more thumbs up.
@BrowneysGarage2 жыл бұрын
Legend, thanks very much mate!
@Caleb__main2 жыл бұрын
Such great videos
@BrowneysGarage2 жыл бұрын
Thank you very much mate, glad you enjoy.
@samthestoryman37572 жыл бұрын
Yay! So excited for you to do this, I’ve got the same turbo and I nearly have all the bits to do this to my fg. Everything thing you said at the end was hilariously spot on 😁😁😁.
@BrowneysGarage2 жыл бұрын
I wish it wasn't so true! Awesome, good luck with it mate. Great to see so many others doing NA+T stuff now 👍
@KiwiPokerPlayer2 жыл бұрын
I've been looking forward to this series Brownie. I'm considering it for my BA XR6 so I'll be watching with great interest.
@BrowneysGarage2 жыл бұрын
Thanks mate, excited to see what she can do 👍
@johnconroy95552 жыл бұрын
Way to go Browney cant wait for this should be a hoot...john..Willaura..😎
@BrowneysGarage2 жыл бұрын
Thanks John, fingers crossed!
@TheEndfieldgaming2 жыл бұрын
heck yeah man so excited
@BrowneysGarage2 жыл бұрын
Thanks man.
@187maker2 жыл бұрын
Excited for this build. Please do valve springs and head studs for when you eventually turn up the boost.could be with doing oil pump gear as well.
@BrowneysGarage2 жыл бұрын
No promises on any of these, probably doesn't NEED any of them, but you never know👍
@rain11732 жыл бұрын
no point with an n/a barra you’ll be maxing out your rods before even pushing the standard headstuds i’ve been told by many tuners
@187maker2 жыл бұрын
@@rain1173 thanks for the info had no idea about BA N/A rods
@patrickblizzard92582 жыл бұрын
So glad to see you back Browney! I've been waiting to watch this for months. Gunna be following this build with keen interest Mate, and I'll be taking mental notes. My NA BA may just be getting an upgrade too. Crack On Big Fella!
@BrowneysGarage2 жыл бұрын
Thanks for waiting, these things take bloody ages to get out and life gets in the way! Plenty to come though, hope you enjoy mate, glad I could be a bad influence 👍
@Doc_in_the_carpet_truck2 жыл бұрын
Great to see you back Browney!!!! Keeping lockdown bearable since early 2020 👍🍻🤣
@BrowneysGarage2 жыл бұрын
If only I could knock out as many videos as there are lockdowns! Next couple will be out very soon though. Thanks mate, and hope you're getting through alright 👍
@imGlobL2 жыл бұрын
Onya browney!! Looking forward to the turbo conversion series you got coming mate
@BrowneysGarage2 жыл бұрын
Thanks mate, hopefully it's a good one... it better be at least, a lot of work has gone into it already! Haha
@myxrutefalcon2692 жыл бұрын
Cheers 🍻 browny I've done all of what your planning to achieve with this current series of videos your about to do I have done all of what yourgunna do.with great success. 👍 I'm sure you discussed your plans with Zane at Max performance. So screw the keyboard warriors &good luck with the project. Any advice if needed please reach out .
@BrowneysGarage2 жыл бұрын
Awesome to hear others who’ve done it and been happy with the results, I’m sure I will be too. Thanks very much mate 👍
@matthewoutram12282 жыл бұрын
Very excited to see this series Im considering turbocharging my FG Falcon great first video
@BrowneysGarage2 жыл бұрын
Nice, good luck with it mate. Sounds like the FG is slightly more of a headache/harder to get parts for at the moment but results should be awesome 👍
@familyaccount89272 жыл бұрын
Nice car mate and a great build series!👍
@BrowneysGarage2 жыл бұрын
Thank you mate! 👍
@leontk102 жыл бұрын
hey mate, would you ever considering maybe doing a gearbox change? even to the later used ZF
@BrowneysGarage2 жыл бұрын
Not in the plans but I'd consider a 6 speed manual or some upgrades for the BTR (stall or toughened up). ZF isn't really on the table and not something I think is worth it at the moment, it's been done I'm sure but there's a lot to it with changing all the looms, computers etc as well I believe.
@mickfares2 жыл бұрын
I watched the na series way back when and been waiting for the turbo conversion. I recently picked up a mk2 xr6 turbo for 4k at auction and she’s been going strong for a month or so at the moment! Super keen to watch the build play out 👌🏼
@BrowneysGarage2 жыл бұрын
Wow that's an amazing pick up mate, well done! Thanks for watching along, hope you enjoy what we have coming and your new toy 👍
@drummondhill32302 жыл бұрын
The same day I started doing up my NA Ba xr6, and you started this series. I am so excited to see where this goes
@BrowneysGarage2 жыл бұрын
Nice timing mate, hope you enjoy what we have coming.
@Lumberjackedmilzy2 жыл бұрын
Glad you’re back mate been waiting for this
@BrowneysGarage2 жыл бұрын
Hope you enjoyed it! Plenty to come 👍
@lordoftheburgerrings68182 жыл бұрын
Im rapped to see this happen
@BrowneysGarage2 жыл бұрын
Thanks mate, me too!
@MeatballGarage2 жыл бұрын
Browney is BACK! Mate great explanation of the project and your goals too! You have put a lot of thought into the parts and process - can't wait to see it all come together! Reckon your green car will defo be faster than my green car once its all done! I think people who say its better to buy an already fast car miss the point of it being a project, there is a lot of enjoyment and knowledge to be gained by going through the process - and its also fun for us to watch too!!
@BrowneysGarage2 жыл бұрын
Thanks very much mate, been a long time in the works... and still going! May be faster soon but I know you still wouldn't swap haha. Couldn't agree more, and to boot I think there's something wrong with me cause I often enjoy the work before the drive more - at least once it's done and I can look back anyway! Plus I think this is more relatable, it's what I'd prefer to watch anyway. Congrats and good luck to you and Kinal with bub on the way too mate.
@MeatballGarage2 жыл бұрын
Browney's Garage Browney's Garage hehe yeah spot on - my Fairmont aint going no where! You are not alone in that camp - plenty of people prefer to tinker than drive their pride and joy. Its all about the journey! Cheers mate - Kinals doing a great job so far and D day will be very soon (prob this week) so its all happening here!! Very excited to have a little person in the house that can one day hand me tools whilst I’m under a car 😀
@s4ss.m82 жыл бұрын
"Cheapest base XT" My XT: -cries in spooly boi noises-
@BrowneysGarage2 жыл бұрын
Haha nothing wrong with XT's mate.
@s4ss.m82 жыл бұрын
@@BrowneysGarageyou wouldn't be able to tell mine was 🤣
@TerritoryOffroad2 жыл бұрын
I can't wait to see how this turns out. I've done everything you have apart from the tune to my NA offroad territory. I find I need more torque with the bigger wheels and was thinking about the 6 speed conversion or turbo. I really look forward to the detailed videos you do. Thanks.
@BrowneysGarage2 жыл бұрын
You and me both! Turbo Territory would be a damn good thing. Much easier than the 6 speed swap too, assuming you mean the ZF auto? Sounds like a headache unfortunately. Thanks for watching along mate, hope you enjoy what's coming.
@change_your_oil_regularly42872 жыл бұрын
I've got a late 07 bf mk2 Fairmont Ghia with the std 190 barra and the zf 6 speed. Best auto I've ever driven. On the street at least it makes all the 4 speeds I've driven feel like clunky slow dim witted dinosaurs, including the extensively modified autos I've driven. Light years difference. Went the t56 in my xr8 though Just my opinion 🤷
@vegeta-ssjgod2 жыл бұрын
Legend keep it up
@BrowneysGarage2 жыл бұрын
Will do my best! Hope you enjoy what we have coming 👍
@user-of9px7gg9e2 жыл бұрын
Welcome back! :)
@BrowneysGarage2 жыл бұрын
Thank you mate, good to have something done that I can share with everyone again!
@IDGAF568522 жыл бұрын
Im sure you are well aware of this but you must replace your valve springs with heavy duty turbo springs browney,plus the oil pump gears wont last long if you are going to be doing track work with it. Ive considered turbocharging my 2010 FG XR6 and it was running into nearly 5 grand for everything, not including a tune. Then theres the braking upgrades and a turbo tailshaft,and a haltec ecu pro. Reliability and power comes at a cost.
@BrowneysGarage2 жыл бұрын
Depends on your goals and how it's treated, plenty of cars getting about without what you've listed, including factory turbo cars - braking upgrades and Haltech ECU are far from must haves. Thanks for watching mate.
@IDGAF568522 жыл бұрын
@@BrowneysGarage factory turbo barras have bigger valve springs in them,and LPG conrods. Seriously if your going to be doing track time i would be replacing the factory oil pump gears with billet gears and put turbo valve springs in it at least,otherwise you could easily destroy your N/A barra,they are not designed for boost. Thats up to you,but if your going to boost it your better off doing it properly and you wont have to worry about reliability and blowing your engine up.
@hoonzy13922 жыл бұрын
Also I’ll grab a shirt ASAP any chance on a banner of the falcon doin a burnout
@BrowneysGarage2 жыл бұрын
Legend! No plans as yet sorry, we're a little limited with the range of products we can offer for now but if things go well who knows in the future.
@conservativesniperhunter74392 жыл бұрын
This is going to be a great series 😀👍 .
@BrowneysGarage2 жыл бұрын
Hope so! Thanks for being here mate 👍
@conservativesniperhunter74392 жыл бұрын
@@BrowneysGarage No worries Browney , keep up the great content mate .
@kwridgway2 жыл бұрын
Hey mate, looking forward to the series ! No firey crashes before you finish the conversion !
@BrowneysGarage2 жыл бұрын
Will do my best! Thanks mate 👍
@rossmarzano2 жыл бұрын
Looking forward to subsequent episodes. I am currently working on a reasonably priced brake upgrade, 8pot front calipers and 4 pot rear.
@BrowneysGarage2 жыл бұрын
Interesting, would love to see what you come up with if you get a chance to share once it's done. I don't think I really have a need for them at the moment but I've always had a weird attraction to any good looking, big set of brakes - always something that stands out to me even just as an aesthetic thing as odd as that may be. Thanks for watching mate 👍
@rossmarzano2 жыл бұрын
@@BrowneysGarage it's for looks for me too, but anything is better than the tiny brakes I currently have. I will try and share when done, just getting started now. I want to convert my BF ute to turbo, so I am keen to see your future vids. 👍👍 Good work on your past vids also, been watching for a while
@samfromnonofyourbusiness2 жыл бұрын
Yer you said it. Ive been looking forward to that. And to all the people who has been saying "just buy a turbo car", this series isnt for you. This series is specifically for the passionate and enthutiast not for lazy bones. Driving a car which you have turboed yourself is something totally different and satisfying.
@BrowneysGarage2 жыл бұрын
I’m with you, but there’s a place for both sides. The ‘just buy a turbo car’ argument doesn’t give me any satisfaction really, or of course learn anything. The argument did also make a lot more sense back when the price gap wasn’t what it is today, but I’m sure most who said it weren’t really giving it much consideration anyway.
@rileyharrison13812 жыл бұрын
Morning Browni n the boys, FG's toungin for a t-bo but so the starlet... farkk
@peabow10312 жыл бұрын
Ya back mate sweet let's make a rocket👍
@BrowneysGarage2 жыл бұрын
Or hopefully not a grenade instead at least!
@marcftp2 жыл бұрын
I reckon my $400 ba Ute needs a turbo now. Thanks browney
@BrowneysGarage2 жыл бұрын
To be fair I never said I recommend doing it 😂. Good score getting a ute that cheap mate, well done.
@got2bjokin12 жыл бұрын
Glad to see you survived Covid lockdown, again and again and again... Looking forward to seeing this series and how it all turns out.
@BrowneysGarage2 жыл бұрын
Survived and been busier than ever, has part of the hold up on these videos. Thanks mate, hope you're making it through lockdowns ok yourself and hope you enjoy 👍
@robertarchbold86582 жыл бұрын
Sure that's a 3576? Looks like a 82 front housing
@BrowneysGarage2 жыл бұрын
I believe so but to be honest it’s been so long since I looked into how I tell the difference physically I could be wrong, happens more than I like! 🤣 Will have to confirm at some point but their pretty close to each other anyway, I’ll take either.
@hairykarrot80922 жыл бұрын
Hey Brownie, could you make a list of all the parts you have bought on a google doc or something for us to look at? :)
@BrowneysGarage2 жыл бұрын
Hey mate, will put a list and probably an ep on all the parts used once I know everything works and I'm happy with the parts 👍
@hairykarrot80922 жыл бұрын
@@BrowneysGarage we love you
@barra245t22 жыл бұрын
I shouldn't be ripping bongs this early,fuk it its lockdown
@KalebLudlow2 жыл бұрын
bong on legend
@hoonzy13922 жыл бұрын
Awsome I have the exact same and spec falcon as yours and I’ve loved the series it’s been great I’m on the goal to get my car legal again and turbocharged on the asap
@BrowneysGarage2 жыл бұрын
Sweet, good luck with it mate 👍
@hoonzy13922 жыл бұрын
Thanks man keep up the good content
@CAIDMASTEROFPYRO2 жыл бұрын
I sold my BA NA XL ute and bought an fg g6e turbo. sold the ute for $3500 more than I paid and the g6e is currently worth about $7000 more than I paid, Not a bad idea tbh though I bought the g6e at the right time because it shot up in value straight away with covid prices
@xd-74772 жыл бұрын
Did you consider the T.I performance kit?
@BrowneysGarage2 жыл бұрын
Seems a decent option and would consider it but I like the idea of picking up second hand factory parts cheap when I have been able to, and it’s hard to beat the bolt on fit of factory parts when they’re suitable.
@MrCharliethegorilla2 жыл бұрын
Great to see you back mate! If you do decide to get rid of your current exhaust, feel free to post it to me in NZ :)
@BrowneysGarage2 жыл бұрын
😂 No worries mate, I'll strap it to a few magpies and send it over.
@MrCharliethegorilla2 жыл бұрын
@@BrowneysGarage Might need more than a few... seems hard to get a decent exhaust over here for a reasonable price
@TacoBurrit02 жыл бұрын
@@MrCharliethegorilla or when you find it they're always sold out of the cat
@MrCharliethegorilla2 жыл бұрын
@@TacoBurrit0 Yeah - XForce I presume? I've been seeing that lately
@TacoBurrit02 жыл бұрын
@@MrCharliethegorilla yeah. they were in stock for like 3 months last year, i regret not buying it when i had the chance
@peabow10312 жыл бұрын
I've got a 04 fairmont ghia I'm thinking of a turbo or supercharger nothing crazy but the 230000 k's on the clock worries me a bit.
@BrowneysGarage2 жыл бұрын
Guess it depends how it's treated once it was done. Even stock cars can blow with enough abuse 🤷
@jaytonkin2 жыл бұрын
Not so long between vids this time!
@BrowneysGarage2 жыл бұрын
It'll happen again but I'm working on it, next 2 videos will be following closely behind this. But if you guys stick with me we've got some awesome videos coming 👍
@ZOOOTV722 жыл бұрын
what about brakes . good luck wit the conversion
@BrowneysGarage2 жыл бұрын
Oh yeah don’t worry, it’s got those too! As much as I’d love some upgraded Brembos or similar they would be mostly for show. I’ve found the stock ones to be ok at the moment, I know they’re not unreal but OK, but I also haven’t driven it nearly enough recently and a lot of that is just cruising.
@ZOOOTV722 жыл бұрын
OR ba- fg turbo up graded there a bit bigger anyway good luck with the build
@BrowneysGarage2 жыл бұрын
@@ZOOOTV72 It's on the cards at some point for sure. Thanks mate
@adarshsimmy77032 жыл бұрын
Happy to see this new series mate. Was waiting for this after your NA dyno.
@BrowneysGarage2 жыл бұрын
Thanks mate 👍
@dazzamac702 жыл бұрын
Have to considered upgrading the breaks? Can't remember if you've already done it in your NA series...
@BrowneysGarage2 жыл бұрын
Oh it's ok, the car came with brakes 😂. As much as I love big brakes, I just don't have a need for now or with more power unless I'm doing track days or decent hill runs and the car has mostly seen cruising lately. If you’re interested this sort of reflects my points on big brakes - only he is kind of a jerk about it! kzfaq.info/get/bejne/nrpgZph1sJ7amY0.html
@dazzamac702 жыл бұрын
@@BrowneysGarage both you and that video has a very good point!!!👍
@justkyddingracing92682 жыл бұрын
I have been waiting patiently for this to come out. I have a factory turbo car and are looking at doing a turbo wagon to go with it. Although I am confident i can do this i will watch you make mistakes and learn from them. oh and i fitted that same cooler and was pleased with the results. thinking you should be able to get 250rwkw on low boost due to higher compression. my turbo car with just upgraded fuel pump 1000cc injectors and that cheap cooler is 300.07 RWKW on 12psi to get that you will need valve springs which i have done for insurance purposes only.
@BrowneysGarage2 жыл бұрын
Hey Geoff! Yep sorry, these videos take me bloody ages to put together and it’s been hard to find the time. We’re working on it though! Sure you’d be be capable of it, I like people learning from my mistakes though - helps us all! Damn good power and glad to hear your thoughts on that cooler. The few reviews I’ve seen seemed to have been a bit mixed, was you tuber happy with it/do you notice much power lose with heat soak compared to stock?
@arigoro71172 жыл бұрын
Hey Browney in your previous episodes I saw that you drove through lower plenty and I’m not far from there. I have a BA of my own and because of my car and your videos my mates want them too it’d be sick to if you did a meet up or something once covid settles
@BrowneysGarage2 жыл бұрын
Wow that's awesome mate! If I was heading through that way I'm guessing it was the tune video, it's a bit of a hike from us and not normally out there much. To be honest I'm a super quiet guy off camera and would probably be terribly awkward and disappointing 😂. But wouldn't rule out some sort of meet in the future, always great to check out some cars and share stories. Take care during lockdown mate 👍