INTERCOOLER Install & FIRST DRIVE! | TURBO Your NA Barra Pt 6
Рет қаралды 43,231
Күн бұрынIn this ep we’re mechanically finishing the NA + Turbo Barra Conversion for BA/BF Falcons by fitting an intercooler, first stock and then an eBay larger intercooler, before taking it for it’s first drive with BOOST!
Along the way we enjoy plenty of turbo noises including our first little dose and flutter! We recap some mistakes from last episode including the oil drain, make some potential new ones relocating the power steering and trans cooler and show the complete turbo intake piping needed for a stock turbo conversion in your BA/BF Falcon.
Hope you enjoy, if you did and would like to support our little battler channel grow please consider liking, sharing with a mate and subscribe to keep up to date as videos come out!
| MERCH |
Check out our merch store for well priced, quality gear - browneysgarage.deco-threads.co...
| PARTS | As an eBay Partner, I may be compensated if you make a purchase using an eBay link.
(Used this episode, for more conversion parts see previous video)
- Turbo Oil Drain Kit: ebay.us/Y4zYxs
- eBay Intercooler (NOTE: Original purchase price WAS $218 from the seller in the link, don’t pay much more than that and beware of even CHEAPER and POORER copies being made. This is a copy of Autotecnica who may have a reasonable priced unit also, otherwise price may be close enough to go to another upgraded option): ebay.us/qep4nC
- Original Trans cooler used (with mounting brackets): ebay.us/GAQT61
- Mounting kit used for Trans Cooler: ebay.us/AEgoR0
- Hose cutting/flaring tool kit: ebay.us/kHeyve
- Hose used for Power Steering joins: ebay.us/9m2NOu
- Spring Hose Clamps (6mm, for turbo wastegate lines): ebay.us/8Nur6f
| ART DESIGN |
MUNROE - / munroes_workshop
| CONTACTS |
FACEBOOK - / browneysgarage
INSTAGRAM - / browneysgarage
EMAIL - BrowneysGarage@gmail.com
NOTE: As always be careful when completing any work on your car, and if you have any doubts refer to a workshop manual or experts - we are not experts!
00:00 - Intro
01:38 - Mistakes and Fixes from Last Episode!
05:03 - Modifying the Power Steering Cooler
08:36 - Fitting Factory Intercooler
11:02 - Fitting Intake/Charge Piping
12:38 - Fitting Larger eBay Intercooler & Bending AC Line
15:17 - Moving Trans Cooler
17:01 - Remounting Horns and Extend Wiring
17:50 - Final Assembly and Boost Leak Test Coming
19:01 - First Drive and Boost Testing!
23:36 - Drive By and Outro
@brandonoakley5249 2 жыл бұрын
You've almost single handedly convinced me to to buy an na xr6 and turbo it
@BrowneysGarage 2 жыл бұрын
Start scooping up those turbo conversion parts before everyone else hoards them! Thanks mate
@Elguapo93 2 жыл бұрын
Just go buy a turbo already
@AJ-oj5eu Жыл бұрын
You've single handedly convinced me not to bother. Well done on your efforts though, 'i did a thing' is a very gratifying process. Wish I had the patience and skill to match the desire to do this!
@anthonybuttel7910 Жыл бұрын
he already convinced me. just bought an XR6 with a turbo conversion with it
@borismcfinnigan3430 2 жыл бұрын
Thanks so much to fellas like you for doing these videos. Not only entertaining but educational as well
@chilligoz 2 жыл бұрын
You’ve come a long way since you first started this build… Awesome work Browny🍺
@BrowneysGarage 2 жыл бұрын
Thanks mate, slowly but surely getting there 👍
@brockmacckie9905 2 жыл бұрын
@@BrowneysGarage best way to go
@Aiden-nl5ti 8 ай бұрын
I must say the quality of your videos is top notch
@Greenfrong12312w 2 жыл бұрын
Fark, me and my mate Bayley used to watch u in class during high school. This things come a long way!
@BrowneysGarage 2 жыл бұрын
Damn now I feel old 🤣. Thanks very much for watching legend, hope you enjoy what's coming up 👍
@wizardofoz497 Жыл бұрын
Hey Browney, Im a motor mechanic in sydney and i love your vids.especially how your attitude shows non-mech savy people the pains and woes that us mechanics go through daily to mod or repair there beloved rides.If only they new!!!!
@johnrickard4326 6 ай бұрын
well done Mate. Exceptional videos. You are very clear and concise. Love your work.
@user-of9px7gg9e 2 жыл бұрын
Thanks Brownie, love watching the videos, keep up the good work!
@BrowneysGarage 2 жыл бұрын
Thanks for the support mate, will do!
@CraigWedd Жыл бұрын
i dont even know much about cars, but have been watchig your vids for the past 3 hours cause i have the same car
@BrowneysGarage Жыл бұрын
Ouch, that’s far too much of my voice for one day! 🤣 That’s awesome, thanks mate.
@jtsn667 Жыл бұрын
Solid work, I'm on the verge of turboing my sy territory or a stage 2 cam and nitrous and these videos help with deciding Keen to see it back on the dyno 😎
@brockmacckie9905 2 жыл бұрын
Awsome job mate looking and sounding awsome can see how happy you are to drive ur n/a plus turbo made it look easy makeing me half tempted to do the same depending on what hp and times u get with ur set up looking forward to next video keep up awsome work
@BrowneysGarage 2 жыл бұрын
I'm a child, I was just happy it was working and I could make turbo noises haha. Thanks mate, fingers crossed we have some decent numbers and times to come.
@brockmacckie9905 2 жыл бұрын
@@BrowneysGarage dw i walk around making turbo sounds too lol
@wayneparkinson366 2 жыл бұрын
N/A turbo for your commodore falcon xr10
@mg74xbgt 2 жыл бұрын
Have a similar setup in a 2005 BA Turbo and even with rubbish 60 footer of 2.2 it managed to run a 12.9@111 with 10psi tune. You're going to be smiling from ear to ear !!!
@BrowneysGarage 2 жыл бұрын
Must be going pretty hard once it passes the 60 for what it is! I’m sure I will be mate.
@nicklicul8159 2 жыл бұрын
I really enjoy your channel mate. Keep up the good work 👍🏼
@BrowneysGarage 2 жыл бұрын
Will try, thanks very much mate.
@Lizards_Lounge 2 жыл бұрын
Sweet, glad it all went well. Getting tighter in there that's for sure.
@BrowneysGarage 2 жыл бұрын
They crammed a lot into these engine bays, much harder to work on now! Thanks mate.
@tomchalker8966 2 жыл бұрын
Can’t believe I’m 5 days late, let’s go browny!!!!!❤️
@samthestoryman3757 2 жыл бұрын
Good job mate! Great video again, Sounds and looks good!!!
@BrowneysGarage 2 жыл бұрын
Cheers mate, thanks for watching 👍
@Tamajyn69 Жыл бұрын
After watching this series we finally decided to pick up a BF XR6 yesterday as our first project car!
@BrowneysGarage Жыл бұрын
Damn, that's awesome. Good luck and hope it treats you well!
@Tamajyn69 Жыл бұрын
@@BrowneysGarage cheers! We drove her home 100kms and realised there's two holes on the head where the camshaft sensors should be 😅 after chucking those in and a new 02 sensor she's running great
@micka4697 2 жыл бұрын
Great video Browney 🖒 Looking forward to the next one👍
@BrowneysGarage 2 жыл бұрын
Thanks mate, just under 2 weeks for the next one 👍
@jessedee5696 6 ай бұрын
Myself being a vl turbo owner, am amazed by how meticulous you are with everything. Not one “she ‘lol be right “ haha
@joevd9949 2 жыл бұрын
This is awesome!!! Great work mate!!
@BrowneysGarage 2 жыл бұрын
Thanks a lot, cheers for watching mate!
@jdbourke75 2 жыл бұрын
G'day Browney great Vid again mate love the content keep it coming! We are working on my sons first car which is a 05 Ba NA so have loved the mods on the NA episodes and helps him learn about his car, also gives him a reason too look after it so when he comes off his Ps he can convert to a NA/T
@BrowneysGarage 2 жыл бұрын
That's awesome mate, amazing to hear. My dads a good man but doesn't share my interest in cars, can imagine how great that experience would be though... that is if we didn't kill each other! 🤣 Good luck to you both mate 👍
@change_your_oil_regularly4287 2 жыл бұрын
Well done 👍
@VT97Calais 2 жыл бұрын
Turbo noises around the house 😂 love it ! I do the same ...cos I have an ECOLPI xr6 👍 your vids are awesome by the way mate💯
@BrowneysGarage 2 жыл бұрын
Glad I’m not the only child! Cheers mate
@spiritlevelstudios 2 жыл бұрын
Nice work mate. I've gone down the diff, brakes, suspension and manual conversion path. I'll run out of funds by the time the manual is in it, but have a good platform for future mods. And no pesky trans cooler to contend with. The more I deal with workshops, the more I am convinced of the value of DIY. Always some weird new problem when it comes back if / when I decide to outsource work. I got my diff builder to install 3.9s in with a torque lock LSD using an M80 (BF III) housing. Still bedding in the new gears, but it's woken up a bit despite the auto, the speedo is still accurate (ish), the intermittent ABS light has stayed off, the factory diff whine is gone and the dreaded single spinner is thankfully long gone. Today I'm making some more progress on fixing up the melted rear bumper onto exhaust tip situation. Keep up the good work Browney : )
@BrowneysGarage 2 жыл бұрын
Manual or good gearing would have woken this up a lot when it was NA, both should be even betterer! I feel much the same about DIY, that or the random damage that unfortunately can happen sometimes - things happen I just wish their were more honest people with some pride in their work but get that that costs proper money too. Good luck fixing the melty bumper, I hate messing with exhaust hangers! And thanks for your ongoing support mate.
@spiritlevelstudios 2 жыл бұрын
@@BrowneysGarage yeh true. The exhaust hanger gods have been kind to me for a change so it all went smooth today.
@peabow1031 2 жыл бұрын
Floor it Browney 👍💥 great episode mate!
@BrowneysGarage 2 жыл бұрын
Can’t wait for a proper test drive! Thanks mate.
@bearcatracing007 2 жыл бұрын
Hey man straight up its the beard that makes things spurt......... Great job man looks good, sounds good, goes good! Bloody love it. Also how comfortable are the shirts hey!
@BrowneysGarage 2 жыл бұрын
The wrong things apparently though! 🤣 Bloody hope the thing goes good this time, but at least for now it's sounding and looking good again. Pretty good right, hope yours are holding up well - mine even hide transmission oil stains well!
@Doc_in_the_carpet_truck 2 жыл бұрын
Great Video Browney well worth the wait with a few zingers in there as well!!!!👍🍻
@BrowneysGarage 2 жыл бұрын
Thanks mate 👍
@bpr154 2 жыл бұрын
Nice job Brownie. I have a factory turbo and used the same pwr Trans cooler mounted to the radiator. Wish I knew that I could have moved the bottom rad mounts back as I ended up cutting and shutting the factory intercooler brackets. Worked but was a pain in the arse and added a fair bit more time to the job. Got there in the end though. Keep up the good work
@BrowneysGarage 2 жыл бұрын
Don’t stress too much, it really didn’t buy much space. Sounds like much more work you way but would be the way to go for sure 👍
@conservativesniperhunter7439 2 жыл бұрын
Another great job Browney . Well done mate 👍.
@BrowneysGarage 2 жыл бұрын
Thanks legend, very fortunate to see so many guys this yourself still here from early on in the channel - even after a bit of a wait on this one 👍
@conservativesniperhunter7439 2 жыл бұрын
@@BrowneysGarage We’re still Subscribed because you create good content for our Australian made cars on how we can fix problems that occur over time or improve their performance Browney . Our Aussie made fords and Holden’s may not be made any longer so we want to keep them well maintained in good mechanical condition for as many years into the future as possible . We can do that with the help of people like you who show us how to . Cheers 🍻 🍻
@benjaminmason8458 2 жыл бұрын
Doin the same with a terrortory motor into a factory turbo BA sedan I bought minus driveline ..with T50 conversion .. just gona run all factory turbo gear and run factory boost .. they a fast car in that form I’ve Also another BA turbo also
@MrFordpower 2 жыл бұрын
Nice work Brownie tututututu
@P2DAPIPE 2 жыл бұрын
😄love your boostguage idea. Cool vid ✌🏼
@BrowneysGarage 2 жыл бұрын
Not stupid if it works… sort of anyway! Cheers mate 👍
@cartycarnage2108 2 жыл бұрын
Hell yeah good work man love yours vids
@BrowneysGarage 2 жыл бұрын
Thanks very much mate 👍
@mainiesexpress6670 2 жыл бұрын
love your videos bro
@ebv8 2 жыл бұрын
Thanks for all the intercooling pipe routing info, hard to find that info on google. My confidence is growing to start ripping into my SY NA+T.
@BrowneysGarage 2 жыл бұрын
All good mate. I spent far too long looking for it originally, then spent even more time checking and double checking I had it all! Plenty of these NA+T Falcons going now but we could use more of the same in the Territory’s - good luck 👍
@glensgraphix 2 жыл бұрын
Well done!
@BrowneysGarage 2 жыл бұрын
Thanks Glen, cheers for watching along still and hope your well now we're free again 👍
@MrBiteus 2 жыл бұрын
Always like your vids mate. Job well done. I'm a little annoyed I had to wait until I'd finished work to watch.
@BrowneysGarage 2 жыл бұрын
Couldn’t sneak an extended toilet break? 🤣 Thanks very much mate.
@stevehesketh747 2 жыл бұрын
Sweet video mate 🤙
@BrowneysGarage 2 жыл бұрын
Thanks for being here mate 👍
@HappyYodeler4 2 жыл бұрын
Hey Brownie, great vid! If you’re still running the stock radiator, I’d highly suggest getting a 52mm all alloy radiator Picked up one for $200~ on eBay because my n/a one wasn’t cooling enough and ended up breaking at the top rad hose
@brendanjameswilliams 2 жыл бұрын
Awesome job mate 👏
@BrowneysGarage 2 жыл бұрын
Thanks for watching mate 👍
@brendanjameswilliams 2 жыл бұрын
@@BrowneysGarage Thank you mate
@fenzoner6549 2 жыл бұрын
Keep up the good work mate!!, she sounds sweet!!
@BrowneysGarage 2 жыл бұрын
Thanks, will do my best! Cheers for the support 👍
@lachlantummon7160 2 жыл бұрын
Good to see browny i have been waiting so patiently for this video good to see cant wait for the dyno when is it coming out i am planning on turboing my N/A ba
@BrowneysGarage 2 жыл бұрын
Can't wait to get there either, no date set just yet and a few good (hopefully) videos to come yet though 👍
@smithy2 2 жыл бұрын
Good stuff Browney, Love the stuff ups 👍🏼, i just did a head gasket replacement, I put the whole motor back together and noticed i'd forgotten to put the cam oil seal in 🤦♂️
@BrowneysGarage 2 жыл бұрын
Ouch! Glad it's not just me, and thankful it's in the top end at least and not a rear main or something similar.
@smithy2 2 жыл бұрын
@@BrowneysGarage haha na mate your definetly not alone there 😁 Oh yeh that would have sucked being a main
@goattttmaxx Жыл бұрын
Awesome content! I really enjoy watching it. :) Am I correct in saying that this process would also be carried out the exact same way in every Barra 190 model?
@jasonmacklin8264 2 жыл бұрын
Good luck sounds awesome Good video.
@BrowneysGarage 2 жыл бұрын
Thanks for the support mate 👍
@Kitcat8357 2 жыл бұрын
Awesome work mate 👌👌hope one day we see you somewhere in car meet around Glen Waverley or Port Melbourne.
@BrowneysGarage 2 жыл бұрын
Cheers mate, you never know 👍. Poor things starting to look a little beat up here and there though, had a tough life before me!
@justkyddingracing9268 2 жыл бұрын
another good one Brownie. if you want to build boost on the line you need to pull the handbrake/ e brake on hard. my turbo BA will spin the wheels with just the footbrake and build almost zero boost. with handbrake on I can easily build 5psi then simply drop the brake and floor it. my car with pretty much identical mods best so far 12.6 @ 115mph so something for you to aim for.
@BrowneysGarage 2 жыл бұрын
Could be a problem - hand brake is stretched to buggery and hanging on by a thread on one side I believe. Hmm we’ll see whether I can get in to address that soon or not. Thanks for the heads up Geoff, killer times there 👍
@akaitv6606 2 жыл бұрын
Those flares will eventually cut into the hydraulic hose mate , 2 options just go down to a hydraulic hose place and get them to make you the steel one properly, another trick is to remote mount an electric power steer motor from a Volvo or astra , it needs 40 amp power and ground and a switch wire to ignition . Allows you to completely remove the old power steering pump and fit an idle pulley in the old position. More space A lot of drifters do this mod keeps the power steering system cooler .
@tonywilkey4369 2 жыл бұрын
Good video Browney you show how it is with your un edited vids, it not all beer and skittles when working on cars you know the saying if it's got t.ts and wheels it will give you trouble. Tony
@BrowneysGarage 2 жыл бұрын
Nothing ever goes 100% to plan on cars, think people would enjoy working on them more if they realised it was that way for others too 🤷♂️
@Fuaarrkk 2 жыл бұрын
Didn't stay stock for long haha! Awesome vid mate. First mod I did to mine was an intercooler too
@BrowneysGarage 2 жыл бұрын
Can never just leave these things alone can we! 🤣 Thanks mate
@Fuaarrkk 2 жыл бұрын
@@BrowneysGarage cars, theyre the best and the worst hahaha. Plenty fun to own and have, not so much when it comes the money spent on them 😅
@BrowneysGarage 2 жыл бұрын
@@Fuaarrkk Too right - who needs all that extra money, time and sanity anyway though!
@MonsOlympus 2 жыл бұрын
Wasnt sure if rodney paid you a visit, good to see its all working 😀
@BrowneysGarage 2 жыл бұрын
Not yet! Thanks mate 👍
@neilbeni7744 2 жыл бұрын
Much more betterer 👊🤣
@diggerau698 2 жыл бұрын
Great vid mate been looking forward to this one. Did you go back to the stock exhaust manifold?
@BrowneysGarage 2 жыл бұрын
Yep, factory turbo BA manifold. Thanks mate.
@shaungronk4972 2 жыл бұрын
38 secconds got u a sub
@TheEndfieldgaming 2 жыл бұрын
great good morning present mate lets gooo
@BrowneysGarage 2 жыл бұрын
Hope you enjoy this one mate, I sure as hell did!
@TheEndfieldgaming 2 жыл бұрын
@@BrowneysGarage i defiantly did mate
@plumbs7199 2 жыл бұрын
Mate , get your tuner to to adjust the s5 global temp to negative 200 at least via pcm tec . To have the box shift quicker and harder and hopefully give your btr a chance to live !
@BrowneysGarage 2 жыл бұрын
Tuner will have a play with the trans tune while he's in there, but it will have FULL pressure when going hard/at the strip already - kzfaq.info/get/bejne/nuCRmcp-x7-opHk.html . Hope that BTR lives, think it'll be ok though.
@seanedwards1838 2 жыл бұрын
Awesome, hope to see another video a but quicker
@iansdetailing7236 2 жыл бұрын
How do go on insurance with turbo on it now
@nsjumper 2 жыл бұрын
Hey mate where did you attach the T piece for the boost guage line? Is it ok to attach it on the vacuum line attached to the blow off valve?
@BrowneysGarage 2 жыл бұрын
Yep, that's it mate. Just tee'd into the blow off valve vac line, nice and easy to get to. Will cover it a little more in the gauge install vid I'm working on 👍
@nsjumper 2 жыл бұрын
@@BrowneysGarage thanks a lot mate! With the help of a few mates I managed to get my whole turbo setup installed on Saturday. I'm just waiting on the ECU to come back but it went together really well thanks to your videos! When I pulled the ECU out I noticed the 3rd port that isn't generally used on non turbos actually had a plug in it. On closer inspection i found the plugs on the loom for the factory boost controller and pressure sensor on the alloy intercooler charge pipe so I believe I can run factory boost control! I'm not sure why some have the loom and some don't but mine is a manual XR6 ute
@jacksonroper7438 2 жыл бұрын
Hey mate, great video, just curious if you have the specs of the bolts you used for the turbo heat shields? Haven’t been able to find them anywhere
@BrowneysGarage 2 жыл бұрын
Sorry, link was in last videos description when I discussed these quickly. They're just a Mamba Exhaust Stud Kit, not needed and factory bolts would work fine but have a tendency to back themselves out and the studs should help with this - link is here ebay.us/xdUNzs
@jacksonroper7438 2 жыл бұрын
@@BrowneysGarage Not the stud kit, you're running the factory turbo heat shields that attach to the turbo manifold and the factory dump iirc, I have a set of those what wasn't given any bolts for them, so I was just wondering if you knew what size/thread they were
@BluesShed 2 жыл бұрын
Just a question mate have you installed a one way valve to to PCV valve to prevent positive manifold pressure entering the crankcase when the turbo is producing boost
@BrowneysGarage 2 жыл бұрын
Fair question, I believe they normally already have a ball valve and function this way factory. But also it feeds back into the intake before the turbo so doesn't see any positive pressure other than from the crankcase.
@BluesShed 2 жыл бұрын
@@BrowneysGarage I recently did a full rebuild of my wife's territory turbo and noticed the check valve in the line to the pvc valve Additionally the reason I had to rebuild the engine was because the boost control soleniod was blocked with stale oil being fed from the forward crankcase vent which caused an overboost and massive backfire I now run a catch can from the forward crankcase vent to the catch can and back to the inlet tube prior the turbo intake which clearly has reduced oil feed back into the inlet tube The point here is that the check valve from the manifold caused all the crankcase vent to escape from the forward line when the engine is on boost hence excess oil feeds into the inlet tube to the turbo Be wary of this because a rebuild of a barra is really expensive
@NIZMOTU 2 жыл бұрын
more Barra please
@adelaideinvigilation5230 2 жыл бұрын
I usually do that with sauce bottles and pies
@BrowneysGarage 2 жыл бұрын
Oh yeah, or the squeezey sauce packets that get that first snap straight on your shirt 🤣
@akaitv6606 2 жыл бұрын
Should make about 225kw at the treads with 7lbs
@minusyt5659 2 жыл бұрын
when are you gonna do work on the e series falcons
@BrowneysGarage 2 жыл бұрын
When this series is finished. It's coming, nearly done... for now!
@Getsum-ii 2 жыл бұрын
Okay now you have a xr6t you have to drive it like one aye 😜 1st to 2nd power skids from every business you leave 🤣every industrial cul-de-sac/swing it at every big set of lights 🤣🤣 👀 Hahaha nah be safe man nice buid💪
@BrowneysGarage 2 жыл бұрын
Don't think it'll probably feel turbo until I have a crack at some of these! 🤣 Nah to be fair I mostly drive like an old man on the road now, should be fun though 👍
@flre_rgue3916 2 жыл бұрын
What paint was used to paint the power steering cooler lines?
@BrowneysGarage 2 жыл бұрын
Whatever somewhat high temp black I had left around mate, was a pretty rushed job. Sorry not much help but shouldn’t need to be anything too special I hope.
@JETBYE 2 жыл бұрын
use 18 cm of copper straight pipe on the turbo for a dose pipe
@Flying_GC 2 жыл бұрын
Mate that oil return line isn't going to work for long. Trust me I've been through all of this saga. The rubber will just split and you'll be leaking again in no time. The only proper long term solution is an AN setup with steel braided hose. I highly suggest sorting this soon because once you get some heat through the rubber hose it will be done again.
@robertdoolan1361 2 жыл бұрын
Browny, you got a link for that front mount please 👌👌
@BrowneysGarage 2 жыл бұрын
In the description mate, but the seller I got it from now has it for over $1k when I picked it up for just over $200 originally! Hopefully only a temp thing, there’s others on eBay as well but just be careful because there looks to be some even cheaper and REALLY poor looking copies (think that’s about 3 tiers of copies away from the originals now!) popping up too.
@robertdoolan1361 2 жыл бұрын
@@BrowneysGarage maybe there out of stock so they’ve thrown it up for heaps! I will keep an eye out
@RicksWorld91 2 жыл бұрын
@@BrowneysGarage thats what sellers do, it costs them to take down and put up new ads, so they just increase the price to unrealistic amounts when out of stock. Once they have stock down, price will be normal.
@BUZDRIFT 2 жыл бұрын
lol that fmic has pretty much zero flow going to it! There's a reason peeps run tall stubby fmic on a friggin falcon!
@Kyle-dx8cb 2 жыл бұрын
I'm trying to get my na-t turned atm and the tuner told me that they can't tune it without that boost pressure sensor is there like a certain threshold of boost before you actually need it or what?
@BrowneysGarage 2 жыл бұрын
Are they referring to the one in the metal under battery tray intercooler pipe, or the one in the intake manifold? Intake manifold one will need to be upgraded to read anything above 1-2psi I believe, the one in the intercooler piping should be fine left not wired.
@Kyle-dx8cb 2 жыл бұрын
@@BrowneysGarage they were referring to the one on the metal underbattery intercooler pipe which is why I was confused I might just have to go to a different tuner.
@BrowneysGarage 2 жыл бұрын
@@Kyle-dx8cb Yep, might be best to avoid them then.
@badjuju6563 2 жыл бұрын
I spat my coffee with oil fill explosion. suu suu suu suu
@BrowneysGarage 2 жыл бұрын
Not my finest moment that one, at least I can laugh at it now! Thanks for watching mate 👍
@juststuffwithwolfe4482 2 жыл бұрын
This question is totally off topic but is your paint job a custom job or factory?
@BrowneysGarage 2 жыл бұрын
Factory Envy green but shows up quite different sometimes in different lights and cameras… oh and probably some slightly dodgy not factory repairs before I got but nothing special 👍
@juststuffwithwolfe4482 2 жыл бұрын
@@BrowneysGarage ohh ok it just looks really good I always wanted to paint a car a different cool colour
@BrowneysGarage 2 жыл бұрын
Me too mate, being able to paint parts or a car here is on the goals list - might be one I hate after one job but would be great to say I did it. Thanks mate
@rossbritton4008 4 ай бұрын
What about the DIFF..? They are NOT the same..XR6T has the XR8 Diff..
@steben01 2 жыл бұрын
Hey Browney, interested in selling the extractors? Loving your videos, keep up the good work.
@BrowneysGarage 2 жыл бұрын
Prefer sell it as the full NA exhaust, some time soon when I have time to list and sell it. Thanks for watching mate 👍
@steben01 2 жыл бұрын
@@BrowneysGarage Shoot me a message when you want to sell and I will see if it fits my budget.
@jasonpaper9992 2 жыл бұрын
Browneworks//
@vincestook104 2 жыл бұрын
Good work bro…
@survivorofnarcissist 2 жыл бұрын
LOL
@doylemcguire3807 2 жыл бұрын
💯 𝖕𝖗𝖔𝖒𝖔𝖘𝖒
@Jsrscrap09 2 жыл бұрын
Love the video but u need to shave that bloody beard
@BrowneysGarage 2 жыл бұрын
Not a chance, you’ll have to fight me AND Missus Browney before that happens! 🤣
@blakecrocker9174 2 жыл бұрын
Not hating man but would be heaps more enjoyable to watch if you lost the whole ‘advertisement’ voice. Good videos though
@jesstill7833 Жыл бұрын
Good on man you are having a go nothing like learning by your mistakes it looks good if you are happy that’s all that matters cheers 👍👍👍👍👍💪💪💪❤️❤️🦘🦘🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺
Browney's Garage
Рет қаралды 27 М.
ОВР Шоу
Рет қаралды 7 МЛН
Browney's Garage
Рет қаралды 11 М.
Browney's Garage
Рет қаралды 20 М.
Browney's Garage
Рет қаралды 16 М.
Browney's Garage
Рет қаралды 149 М.
Autograf
Рет қаралды 4,5 МЛН
МАРТИН БОГАТЫРЕВИЧ garage
Рет қаралды 1 МЛН