Glad to hear it! I hope all my videos help you in some way!

Ross Babcock thank you! Hope you like the other vids.

Thank you!

Next multi targeting and aft torpedos

William Walsh thank you!

James Lanz I appreciate the information. Thank you for letting me know.

Have you switched to SH-5 with the WOS mod yet?

James Lanz I never played SH5 vanilla! It sounded terrible. I went straight to TWoS, and never looked back!

@@SH3Bstanko6 What's TWos?

Squirrel Attackspidy the Wolves of Steel mod found at subsim.com its for SH5.

Subsim.com

Alex Velasco I am using MAGUI F.

Karel Wok you just go into options to adjust your game and how you want it.

SH3 Bstanko6 o I am sorry. I am so stupid. I thought you had to do something in game or something like that. Thank you so much for responding so quick. Haha

David Thomas the dial is in meters. The numbers on the dial are x 100. So 10 on the dial x 100 = 1000 meters. Hope that helps.

@@SH3Bstanko6 I thought that may have been the case, I couldn't see a x100 indicator near the dial. Thanks for taking the time to reply and make these videos, they've really helped.

Hi... the mega mod is NYGM. This GUI is MAGUI F. Hope this helps.

you must have an issue with a mod. Green means your TDC is locked to the scope.

SH3 Bstanko6 I don’t have any mods

Wheelie Bin are you using the same GUI as in my video? If so that is a mod and may require a secondary mod for your resolution. It’s been a long time I’ve used MAGUI F.

SH3 Bstanko6 nah I’m using the default UI so I have to switch between the attack scope and my TDC, everything is default

You have to download a GUI to get that. Vanilla SH3 does not have the dials in view! The one I use is MAGUI F.

Rücklicht I’m not adding or subtracting anything. So order of operations is maintained. You divide, then multiply.

@@SH3Bstanko6 Okay, talking about the Magui mod, do you know any way to combine the magui mod with a 1080p resolution? Possibly with GWX 3.0?

Rücklicht I don’t use GWX. Always thought it was garbage. I use NYGM and Ahnanerbe mods. Much better.

In SH3 I use NYGM for megamod and MAGUI F for GUI

@@SH3Bstanko6 thanks! And one stupid question, but when i fire the torpedo, does it go on that direction, where i head on my periscope?

@@jobu175 if you are using auto targeting then yes. If manual, no. You have to input target speed, AOB, and range into the TDC. I have videos for all of that. Good luck!

emir atis that range dial is the RAOBF wheel. I have a video on it.

SH3 Bstanko6 Ok one more thing what is the unit for the range dial and why there is two numbers?

emir atis range is in meters and each number represents something different depending on what you are trying to find. Again explained in video. It would take a while for me to explain here.

you use the lock when you have all information, hopefully accurate. Then when you press the lock you actually "mate" the TDC with your periscope, so when you move the scope, the TDC updates with it.

@@SH3Bstanko6 holy shit. No wonder the shots are off

So I enter my data. It's all good. Then I lock the scope and fire when the gyro lines up.

Will Lauzon you don't have to, but if the gyro is off, it causes the torpedo to turn, which causes more inaccurate shots. You want to shoot straight and let the target collide with the torpedo.

Samuel Taylor I’ll start with you last comment. You are right... it’s sines. Range, speed, and angle on the bow (AOB). That is manual targeting. I have many videos that teaches how to find range, speed, and AOB separately. My intention with my videos is to make this process easy for visual learners who may have difficulty processing numbers like me. I merely teach how to use the equipment that gets the numbers you need. Now the only green button in this video are the torpedo tubes. The red button is the lock button. I don’t know how your options are set up. That is unusual. If you do not unlock the periscope from the TDC, and play with the numbers, it will snap back, that is the only thing I can think of. Hope I answered you.

Unfortunately I despise GWX. I never got it to work years ago. I restarted, reinstalled, and fiddled with that mod more times than play it. I use NYGM. Sorry. Literally no other mod gives me more headaches than GWX.

@@SH3Bstanko6 No problem. Someone from the Subsim Discord channel helped me. Btw thanks for your videos I still learned many things since I am only new to this game and wanted to play manually.

@@RamentooSpicy glad they help you

@@RamentooSpicy Hi,can u share me the info what u get from Subsim about z00m x 10,and where is the green red button in GW?

@@Ratintheflat I got the formula but skeptical about it cuz the formulas answer is different from the actual range when i tried it in the naval academy

Duntrew of course 90 deg is awesome but only in a perfect world as the target keeps moving. Range takes experience. The way I teach outside of the RAOBF wheel is my way after experimenting with the math. You will find your own method the longer you play.

Thanks, what about the torpedo speed. i see 30 ,.., 44 knots. Do your calculation automatically swap over? cause obviously your torpedo goes faster or slower. and thus arriving on different times at target position.

Duntrew the TDC adjusts the “shoot” bearing. That is the bearing you would launch so that the torp hits at 0 degrees of your boat.

Rücklicht I’m sorry to hear this. I will be honest, you are the first person to ever comment on the resolution!

Are you sure about that? I think that if your aob is not 90 then the ship appears shorter but also part of its movement is in the third dimension so it appears slower

lol

Multiplication and division is advanced math? You were taught that in elementary school.

Дмитрий Шабан I have heard this error before. But I really do not understand where 1.946 comes in. I have even tried using that number and get errors. 1.852 is accurate for me. Could you provide resources?

Look en.wikipedia.org/wiki/Knot_(unit) Table "Conversions between common units of speed" After measurements you have distance in meters and time in seconds. Then speed is in m/s.Your task is convert speed from m/s to knot. At table "Conversions between common units of speed" cross of row "1 m/s =" and column "knot" give you factor 1.943844. (1.852 is factor for km/h).

Дмитрий Шабан the difference is that 1.94 is the international "knot" introduced after 1954. The 1.852 I use is the metric measured knot. I have used 1.94 and I never quite get the accuracy needed. But if it works for you... by all means I hope you rack up many tons.

I may be wrong on the year

@@SH3Bstanko6 1 knot equals 1 nautical mile, which is in fact 1852 meters and it is not a speed measure, it is a longitude measure... Therefore it is already in meters. Knots it is a composite measure that could be detailed as knots/hour (or in fact nautical miles / hour) but in fact 1852 meters / hour it is also correctcorrect to use it as longitude measurement Therefore: 1 knot = 1852 meters or 1.852 kilometers over 1 hour or 60 minutes or 3600 seconds 1 knot / hour = 1852 meters/hour, or 1.852 km/h if you are calculating a distance on a ship (meters) over a given time lapse (seconds) you can divide meter over 1852 to extract a correct knot (nautical mile distance) equivalence... so an example for a ship moving at 6knot/h would be: 6kn/h = (that means 1852m * 6) 11112 m/h = ( 185.2 m/m)... so a 90-meter length ship will do his own length in something around 30 secs in fact another way to measure speed for TDC is to take 30sec sample starting by the ship's bow... even if the ship ain't finished passing or if it has passed completely, you can estimate pretty close the actual speed (that comes in handy when u-boot has still to be positioned correctly) by multiplying by 2 the distance traveled (that way you can quickly check with the auxiliary chart that contains meter/minute for 1 up to 30knots in the navmap on GWX3)

Explain?

@@SH3Bstanko6 the thing is I didint confirm it and just blew it up by torpedo so I got nothing btw how much 88 shells does it take to sink a supply ship I shot alot by the 88 but still it doesn't sink

@@potato23116 hey there, so ships have zones, where damage can be greater or less depending where you hit. It can take a few shots, say if you strike the fuel storage, or it can take every round! I advise striking below the water line. Aim so the shot just hits the water and then the ship. It will take on damage, and eventually sink. But again, if you hit the wrong spots, it can take forever!

@@SH3Bstanko6 thanks. And 1 more thing how can I fix my u boat after I get back to my port in career campaign

@@potato23116 its fixed automatically. The worse the damage the longer you remain in port.

Yeah, I’ve had this convo in the past. You are right, but I don’t think the developers set it that way. If you experiment… you will hit more accurately at 1.85. I’ve must have shot at the academy more times than I can count… 1.85 is deadly accurate.

@@SH3Bstanko6 thanx for the tip. I will use 1.85