NEW Aqara Motion & Light Sensor (with Matter & Thread)!

Рет қаралды 26,611

Күн бұрын

The all new Aqara P2 Motion & Light Sensor supports Matter & Thread! We discuss everything you need to know in this video, plus we'll compare it to the P1 motion sensor.
Sponsored by Aqara
Purchase the P2 Motion & Light Sensor:
US - www.amazon.com/dp/B0CT8W9NRB?...
UK - www.amazon.co.uk/dp/B0CT8W9NR...
Get 15% OFF from April 9 - April 13
US Code - USMSP2SH
UK Code- MLSP2SHW
NOTE: This description contains affiliate links that allow you to find the items mentioned in this video at no cost to you. As an Amazon Associate I earn from qualifying purchases.
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::
SUPPORT THE CHANNEL
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::
🔔 Subscribe for New HomeKit videos EVERY Sunday:
kzfaq.info?...
❤️ Join! Become a channel member. Get perks!
geni.us/shanemember
👕 Merch!
geni.us/ShaneCreatesShop
::::::::::::::::::::::::::::::::::::::::::::
SOCIAL
::::::::::::::::::::::::::::::::::::::::::::
► Instagram - / shanecreates
► Twitter - / shanecreates
► TikTok - / shanecreates
► Website: shanewhatley.com
::::::::::::::::::::::::::::::::::::::::::::::::
🎥 RECOMMENDED
::::::::::::::::::::::::::::::::::::::::::::::::
▶ HomeKit 101 Playlist: Getting Started
geni.us/GettingStarted
▶ NEW Aqara Smart Ceiling Light
• NEW Aqara Smart Ceilin...
▶ MATTER in Action: Future-Proof your Smart Home!
• MATTER in Action: Futu...
▶ Starting a NEW Smart Home (for my parents) - All Aqara!
• I Setup a Smart Home f...
::::::::::::::::::::::::::::::::::::::::::::::::
CHAPTERS
::::::::::::::::::::::::::::::::::::::::::::::::
0:00 Chapters
1:19 Matter over Thread
1:52 What You'll Need
2:37 Unbox
3:15 Connecting to your Smart Home
4:37 Connecting Other Ecosystems
6:07 Specs & Comparisons
8:02 Battery Life
8:53 Smart Home Automations
9:48 Final Thoughts
::::::::::::::::::::::::::::::::::::::
#HomeKit #SmartHome #Aqara

Пікірлер: 103

@ShaneCreates 2 ай бұрын

Get 15% OFF the Aqara P2 Motion & Light Sensor (April 9 - April 13) US Code - USMSP2SH UK Code- MLSP2SHW US - www.amazon.com/dp/B0CT8W9NRB?maas=maas_adg_744E09CD6AF86324BF207836D6A1021C_afap_abs&ref_=aa_maas&tag=maas UK - www.amazon.co.uk/dp/B0CT8W9NRB?maas=maas_adg_518396D623A2E232B700696438491094_afap_abs&ref_=aa_maas&tag=maas

@timothymason5545 2 ай бұрын

Any code for Canada?😢

@pedropaulo7922 2 ай бұрын

Any code for Spain?

@jamieshutter6616 20 күн бұрын

the links just show an error and I cannot find any place to buy this item?

@RaudiRaul 2 ай бұрын

Were all drooling over that M3 hub review 🤤

@pedropaulo7922 2 ай бұрын

Great well structured video. Will get this for sure for my light nursery automation. Should be handy for the night period.

@jhardy0786 2 ай бұрын

Shane thank you you always do videos that are very helpful and congratulations on the new back deck it looks great

@ShaneCreates 2 ай бұрын

Thank you!

@nickpanzeca7640 2 ай бұрын

So exciting to see. Thanks Shane

@sugarchef738 2 ай бұрын

Thanks for the video review! Was wondering why this would be a big deal. I think I actually will get one now.

@GoFastGator 2 ай бұрын

Great sensor, could be my first Aqara purchase!

@EdgarsHomeTech 2 ай бұрын

Great review, Shane. I'm getting it today to test it out. 😎

@ShaneCreates 2 ай бұрын

Thanks for watching Edgar!

@Sah-dd1zh 2 ай бұрын

Eh…I’ll just stick with the Zigbee version.

@jaredmorse9957 2 ай бұрын

Thanks for the review Shane. I really love the Aqara ecosystem and products. I personally use them with Home Assistant and they work great. I wonder if the sensitivity and time-out configurations will be exposed in HA..?

@johncooney1942 2 ай бұрын

Yes for sure we want a M3 review as soon as it drops

@Vegan-notVegan 2 ай бұрын

Is the M3 out yet. I feel like I check every other day to try and order it

@johncooney1942 2 ай бұрын

@@Vegan-notVegan not yet I hope he gets an early release

@JoshFisher567 2 ай бұрын

@@Vegan-notVeganNo, it's still just "this spring" which means sometimes this summer if they can't give a release date. I could be wrong. Just speculation but it's April, so..... I'm not buying any matter/thread devices until they fix the mesh network issues. Right now, every new border router (ecosystem) creates a new different network. They said they are going to fix it but no info on how they will handle existing devices or when it will be fixed. If you join a device to every ecosystem you end up with 4 thread networks which explains the battery life. That would be like running 4 Zigbee controllers.

@yungcrowley1366 2 ай бұрын

man i just want them to release that lever action door lock, my most hyped item for them to release

@nicolascardillo7615 2 ай бұрын

I still have the old Zigbee sensor, but we are planning n using only full Matter n Threads compatible accessories. (I still installing Hoobs new box with zigbee receiver)

@technovangelist 2 ай бұрын

I heard you say a few times that the p1 required an aqara hub. i have about 15 of the first motion sensors and 10 door sensors and have no aqara hubs.

@jonajay 2 ай бұрын

Can you give an update on that Homey Pro Hub?

@marcoarsilvaa 2 ай бұрын

Onvis has one for 30USD. Cheaper with temperature and Humidity sensors. A better choice right now

@apb0703 2 ай бұрын

What is the device on the right in the video, under the tv, that is glowing like flames?

@timothymason5545 2 ай бұрын

I want to see the new m3 really bd and see what can be used with it for other brands

@johnhubbard3879 2 ай бұрын

Thanks for the Review, excellent as usual! I have never used the Illuminance/light sensor in an automation before. What is a typical automation using that feature, or better yet have you made a video on that subject? Thanks again Shane.

@ToniHinton Ай бұрын

Since no one else replied, I can give you a simple idea. I have the P1 sensor in my kitchen and have it turn on a light automatically on motion if the room is dark enough. Before I had the illumination sensor option, I had it time-based but that isn't useful on cloudy days. Note that the P1 only reports illumination data on motion, so it can't be used to just switch on a light when a a room gets dark enough. That was fine for my particular use case but YMMV.

@johnhubbard3879 22 күн бұрын

@@ToniHinton Hey Toni, thanks for the input! I like the use case. I will keep that in mind as I create more automations.

@joseraul96 2 ай бұрын

Great video! Do you have a tutorial on how to setup the custom voice announcement automation in Google Home?

@ShaneCreates 2 ай бұрын

I don’t, sorry. Just HomeKit tutorials for the most part here. But it’s pretty simple. Just create a new household automation and choose a trigger. Then choose “communicate and announce” as your action and create your custom announcement.

@ChrisWilliams-vm1do 2 ай бұрын

I have the P1 over my front entrance. Activates the lights when someone approaches the door and the circle view doorbell is able to record a well lit video of the visitor. The P1 is very affordable. Seems they’re using the new protocol as an excuse to bump up the prices.

@kerrywilliams8100 2 ай бұрын

Does this sensor have ‘Zones’ or is it exactly the same as the p1?

@Hugo-tb4wq 24 күн бұрын

I have a Philips Hue bridge, Philips hue bulbs and 1 philips hue motion sensor (wich works perfect). As the aqara P2 is now supporting matter i bought one to test to add it directly to homekit The reason why I bought it is how you can attach it to almost any surface. But I think I will get back to philips hue sensor. There are more settings I can adjust in the philips hue app and it always works. The Aqara switches off too early or switches on without movement for me.

@jayabbondanza2042 2 ай бұрын

I've been wanting a good light sensor for apple home. I planned on getting the Eve but it is just so expensive! Aqara is one of my favorites - i love having a hub and the automations you can set in their app. Once the M3 drops, I will definitely be adding it to my set up and getting this sensor.

@DirtyDutch079 2 ай бұрын

I got Eve and Aqara… Aqara for the win.

@ganny61 2 ай бұрын

@@DirtyDutch079 why exactly. I think I'm leaning towards Eve b/c of the AAA batteries

@DirtyDutch079 2 ай бұрын

@@ganny61 Eve consumes batteries almost the way I like to drink. Eve without matter: batteries die within a week and a half, with matter it’s a bit better give it a month. And it’s not like I put it somewhere with much ‘’poeple’’ passing by to trigger it. It’s in my garage where it will have 2 triggers a day because my daughter will get her bike.

@ganny61 2 ай бұрын

@@DirtyDutch079 Thanks. If they are both on Thread/Matter technology, safe to assume the Aqara won't last 2 years either?

@DirtyDutch079 2 ай бұрын

@@ganny61 don’t think so 2 years will be the max. With the p1 in my bathroom I’m getting 2 years. Even so the matter one will drain less battery then eve.

@aidanbazan7769 2 ай бұрын

Idk how long you had it, but the truly only thing I care about is reliability. My Aqara P2 door sensor would go unavailable constantly for quite a while and just refuse to work. (In Home Assistant)

@martinskumat 2 ай бұрын

Hi Shane, Which MATTER smart bulb (?Matter Nanoleaf E27 Smart Bulb?) is compatible with the Aqara Motion and Light Sensor P2 (or Eve Motion Wireless Motion Sensor) to turn on the light when it detects motion at a certain time of day( especially at night )? Since I'm an Android user planning a Matter-based smart home, which currently available Matter Border Router (Hub) would work with these devices? Regards, Martin from Slovakia.

@jayabbondanza2042 2 ай бұрын

I'm waiting for the new smart outlet!

@ShaneCreates 2 ай бұрын

Oh yea! I almost forgot about that one!

@maximeboissonneault6203 2 ай бұрын

Is it reporting lighting only when it detects motion ? The P1 did that, which is useless for light based automation…

@hatoraidcowboy 2 ай бұрын

Thread!

@jaroslawrybinski5373 Ай бұрын

With P1 light senson update/read the level of light on movement only! Do you know how does it work with P2?

@martyparshall4368 Ай бұрын

Shane can you explain as I have several devices that have the light sensors when to use that in an automation vs Motion or open close type event? My Switchbot door sensors, now matter compatible with hub 2 I just can’t really figure out what kind of automations to build w these. Thx great video as always.

@ShaneCreates Ай бұрын

Thanks for watching! You can use the light sensor for any automations based on the light. So it's just up to you and your setup. Maybe you want to trigger an automation when motion is detected, but only if the light level is below a certain point (dark in the room). Or maybe an automation that triggers when the light level gets over a certain point (close shades, adjust thermostat, etc.).

@jen-jac Ай бұрын

Is there a sensor for temperature and human presence? I need a sensor to connect to Ecobee thermostat about a hot spot in the house and also to Kasa light switch in case nobody has been in the room for more than 5 minutes.

@youseestefan 2 ай бұрын

But in Homey Pro you can change it

@myHomeKithome 2 ай бұрын

So glad they didn't follow the design aesthetic of the P2 door and window sensor. It is weird that you can't adjust its sensitivity or timeout without the hub M3.

@KeepUpWithKinnon 2 ай бұрын

Shane….shortcut automations can trigger Siri “Intercom” custom messages . I have a few set that run at specific times to intercom to my kids to do certain things like brush their teeth.

@ShaneCreates 2 ай бұрын

Yes! I love that. But unfortunately you cannot trigger those personal shortcuts through HomeKit accessories or automations.

@MG_HK_Matter 2 ай бұрын

Hi Shane.Can’t connect to HK. Using a HomePod mini.Always error code 2009. Any idea ?

@cosmincaliin 2 ай бұрын

Uh i want to buy it but it’s marked as currently unavailable 😭😭

@jefverb 2 ай бұрын

Got a raspberry pi running a homebridge with a conbee zigbee dongle and can’t wait for everything to use thread over matter. Now let’s all cross our fingers that those Siri AI rumors for iOS 18 are true. That would make our HomeKit based smart home a LOT smarter!

@penningtonsm 14 күн бұрын

Hey Shane what’s the best way to have the Aqara motion sensor turn lights on when motion then turn them off when no motion? I don’t like the 1 minute wait time to turn lights off all the time.

@ShaneCreates 14 күн бұрын

That's a tricky automation to get just right. For "light off" automations, I like to convert the automation to a shortcut (when no motion detected as the trigger). Something like this: - When No Motion is detected (convert to shortcut) - Repeat 5 times - Wait 10 seconds - If motion is detected - Stop Shortcut - End Repeat - Turn Off Light Of course you can just do a simple automation to turn off the light when no motion is detected, but that might leave you flailing your arms around in the dark to trigger the lights again. By doing the shortcut method, you are checking a few times to make sure there is still no motion before turning off the lights.

@penningtonsm 14 күн бұрын

@@ShaneCreates Thank you very much. Just starting this HomeKit journey and your channel has been my go to! Appreciate you. I’ll work on that shortcut, after I rewatch your concert to shortcut video one more time. 😉

@pghatak 2 ай бұрын

I would always opt for Thread. Additionally, I'm curious why someone would choose a PIR motion sensor when Mwave presence sensors are available. Wouldn't that be a regression?

@ShaneCreates 2 ай бұрын

Price, form-factor (battery vs wired), and application are a few reasons why one may choose a motion sensor over a presence sensor. Mmwave is great for rooms where you may be idle (desk, couch, bed, etc) but PIR is just fine for things like hallways, closets, and things like that.

@compudude 2 ай бұрын

Quite interesting, but honestly I still prefer the original motion sensors for now, over even the P1 (let alone the P2). The light sensor isn't super useful to me (nice to have, but not why I buy a motion sensor). The originals are noticeably smaller, they're cheaper and still have great battery life using only ONE battery instead of two. I have an Aqara M2 hub so they connect just fine... the Aqara passes through to Apple Home flawlessly. The internet is full of complaints about the performance of the P1 motion sensors, so I really don't feel the need to spend more on an upgrade that may well turn out to be a downgrade.

@dcooke1974 2 ай бұрын

M3 hub...So does that mean the M2 hub won't support the new Matter devices?

@ShaneCreates 2 ай бұрын

You'll still be able to pair zigbee devices to all of the Aqara hubs, like the M2, but they do not have a thread radio built in. Therefore you cannot connect thread accessories, such as this P2 Motion Sensor, to those Aqara hubs.

@cascallana2626 2 ай бұрын

When Matter over Zigbee?

@ShaneCreates 2 ай бұрын

That’s not a thing. Zigbee is not a matter supported protocol. But matter does support bridges, including zigbee bridges. So the Aqara zigbee hubs do support matter and can expose the zigbee sensors to matter through their hub. “Matter over bridge” technically in this case.

@will300c 2 ай бұрын

so sensor is not ready for prime time.

@andersripa 2 ай бұрын

FYI: The P1 version exposes the light level when used with Home Assistant and ZHA.

@pragyandeb6064 2 ай бұрын

It does, but also drains the battery in 2 months (vs 5 years when paired with Aqara hub).

@randygreen007 2 ай бұрын

❤️💪😎👍❤️

@Jaeboy Ай бұрын

Is this better than the FP2?

@ShaneCreates Ай бұрын

Not better…different. This is a PIR sensor, the FP2 uses mmWave. PIR is better for faster, passing movements while mmWave is better at detecting micro movements like sitting at a desk or sofa.

@Jaeboy Ай бұрын

@@ShaneCreates thanks for that clarification and sample use case!

@dreddr6244 13 күн бұрын

How did you set the motion sensor with shortcuts so that is doesn’t turn off the light while the wife is still doing something. I’m using below but sometimes it still shuts off when someone is in the room. Wife’s getting a bit annoyed. 😒 thanks If motion is detected Set light on Otherwise If motion is not detected #8 Wait Set light off

@91326 2 ай бұрын

I’m not clear on why you would get the P2 over P1 if you’re using Aqara hub. The P2 would need to connect to in my case AppleTV over Thread. I’m wondering what the range is since appletv is next to TV which is far from most of my Aqara products. My hub sits right in the middle at close proximity to end points and battery life is excellent. If P2 is on the other side of the house from AppleTV, I imagine the batteries in the P2 will last a few weeks max.

@arapatsakos 2 ай бұрын

the main benefit would be the light sensor that is exposed for the first time in homekit

@GoFastGator 2 ай бұрын

Is the Apple TV the only Thread device in your home or just the closest? It would only take one Thread router (not a border router, just a plain ol' router) like a smartbulb, smartplug, etc to shrink the communication range. Any Thread device that is not battery powered usually functions as a router in the mesh network.

@91326 2 ай бұрын

@@arapatsakos light sensor would be nice except for part that it’s not zigbee.

@91326 2 ай бұрын

@@GoFastGator what is range with thread. WiFi, zigbee, LoRA, etc? I’m not clear on Thread benefits as there isn’t one in this case. Unless Aqara is ditching zigbee and moving to thread. Or is it thread over zigbee? I’m confused.

@GoFastGator 2 ай бұрын

@@91326 Thread is a different network protocol than ZigBee. I'm not so sure Aqara is ditching ZigBee, just offering devices on both protocols. With Thread, it's very common to have multiple hubs or "routers" that form one mesh network instead of a hub and spoke type network. A Thread "border router" then ties the Thread mesh to another network, like you main home WiFi. Without visuals, it's kind of difficult to explain well, but range with Thread is technically infinite. If you were to place the Thread motion sensor out of range with your AppleTV (which is a Thread border router), then you could simply put a Thread smartbulb or smart plug, or a HomePod etc. (anything that is a Thread Router, which is pretty much any non-battery powered device) in between the AppleTV and the motion sensor and it would extend the Thread network range while routing communications. The effective range between a Thread router device and any endpoint device (like the motion sensor) is similar to other wireless devices using the ZigBee protocol.

@bobbratt3576 2 ай бұрын

I am here for HomeKit. And HomeKit alone. I’m not a big fan of Matter. It just seems like a marketing ploy. As far as this product, it sounds nice for some. I like the thread idea but all of my Aqara’s work just fine with Zigbee. I learned a long time ago if it isn’t broke, don’t try fixing it.

@razor-4eg 2 ай бұрын

"They manage to fit thread and matter support into old design" - its not hard when thread and matter protocols using exatctly the same zigbee hardware)) They probably could just update firmware on old motion sensor and add thread to it)

@JoshFisher567 2 ай бұрын

Yup, and it probably costs 10.to 15 dollars more also just because it has matter on the label. I guess it's actually using thread, a lot of devices have just used IPv6, which apparently is perfectly fine after someone mentioned it in some forum and I did some research.

@jasong3193 2 ай бұрын

Amazon Echo Lady A? huh? Cant find anything on this...

@jasong3193 2 ай бұрын

Wait.. nevermind.. i get it now lol

@ByrdNick Ай бұрын

It’d be great if you opened product videos by saying whether the product requires a non-Apple hub at the top of the video. (Even better if it’s in the title, but I get that that the algorithm may not like that.)

@penningtonsm 28 күн бұрын

Can anyone help a Brutha out? I paper these multiple times in HomeKit but as soon as I lake them and check status I get device not responding..deleted and tried a bunch of times. Does it need to be on 2.4 or 5 or does it not matter?

@ShaneCreates 27 күн бұрын

These sensors connect via thread, not wifi. So your network being 2.4 or 5 shouldn't matter in this case. That said, Matter and Thread does require iPv6. So if that is disabled on your network, it could potentially be the issue. Make sure iPv6 is enabled.

@penningtonsm 18 күн бұрын

As it turns out my Apple TV is only 1st gen. 🤦🏽‍♂️ Thanks for responding. Now to decide if i should upgrade my Apple TV or get a m3 hub.

@marios.discus 2 ай бұрын

Still don’t see a valid reason to switch to thread while using apple home 🤔

@bigdeal87 2 ай бұрын

Stay with Zigbee much better

@JoshFisher567 2 ай бұрын

^^^ this. Thread is essentially Zigbee anyways with some minor tweaks and matter devices are more expensive than their Zigbee equivalents. This is 40 US while the P1is 25. PIR sensors were pretty much perfected years ago. A lot of matter devices also work over ipv6 anyway, not thread like this one does. Matter doesn't have to use thread. They also have said they are looking into making matter work o er Ethernet and WiFi and I have no idea why. Until they resolve the multiple thread network issue I won't be buying any matter devices. This was supposed to be working at launch and it still doesn't. Every ecosystem you join a device to creates a new thread network and causes issues and drains the battery quicker. The promise was one network and if one thread border router went down, a second one would take its place if you owned or more border routers. Those border routers would also extend the mesh network range but they currently don't because of this. It would be like having 4 Zigbee controllers.

@vinnie4v277 2 ай бұрын

Oooohhhh the zigbeeee... Is gone.

@GG-vv7nc 2 ай бұрын

Eh…. I’ll stick with Eve Motion.

@syluxdev 2 ай бұрын

Why do you say lady A?

@ShaneCreates 2 ай бұрын

So I don’t set off everyone’s Alexa speakers while watching the video.

@trentburns1753 2 ай бұрын

Advanced Usage; 1) Women are afraid of the dark under a bed 🤷🏻‍♂️. So light strip around bed frame and this motion sensor. 2) Guys need light to pee accurately at night. Light strip around base board or under a cabinet. Bonus points if you can add cross hairs projected inside toilet bowl with overhead garage IR light. This prevents needing lights that wake you up. 3) Light sensors for any stairs. Light strip on stairs.

@ppi57 2 ай бұрын

Be a Man, and sit down when you go ;)