No video
4th Axis Turning on a ShopSabre PRO408
Рет қаралды 34,665
Күн бұрынCheck out the PRO Series utilizing the 4th Axis Indexing System for Producing Furniture Legs.
RouterBob goes through control, setup, software, and demonstrates the quality of a ShopSabre PRO Series for Furniture Turning needs.
For more information please visit www.shopsabre.com
#cnc #woodworking #cncmachine
@joeycast Жыл бұрын
I have been wondering, which version of the RhinoCam plugin are you using, or would suggest? Great video!
@shopsabre Жыл бұрын
We would recommend speaking with Visual Mill to discuss what CAM program will be necessary for your level of need.
@storytellerHD Жыл бұрын
Nice job. I know that this video was posted awhile back but can you tell us how long the machine took to complete the leg that Router Bob is holding?
@shopsabre Жыл бұрын
Thank you for reaching out, you are correct it has been awhile since we did this project, the timing varies on the level of finish you want from the machine vs after the fact, this was nearly completed 100% on the machine so we used a very small step over which increased the time. If memory is correct it was 3 hours of machine time.
@jamjamma 4 ай бұрын
I'm trying to get a the rotary system mounted to the machine. How should I accomplish this while keeping it square to the machine? The aluminum plates don't line up with any of the tracks.
@shopsabre 4 ай бұрын
Please reach out to our tech support team and they will be happy to assist you. 952-461-4570 and ask to speak with a tech
@jamjamma 4 ай бұрын
@@shopsabre I did and was told "however you want to" wasn't the most helpful answer.
@shopsabre 4 ай бұрын
That is quiet surprising to hear and unusual, give our tech support manager a call and they will investigate this situation and help
ShopSabre CNC
Рет қаралды 13 М.
Legacy CNC
Рет қаралды 11 М.