I think a better way to start this video is by explaining that this part is geared towards a more advanced set of users who aim to improve the performance of their weapon, whether in a self-defense situation or competition. My guess is that 99% of the people complaining about the price are either brand new to the hobby or just plain cheap. I'm not trying to insult anyone, but they are probably not aware that there are plenty of firearms in the $4k range and up. I very much welcome that there are companies out there that bring this type of products to the market. If you think $200 dollars is too expensive, stick to the original $70 striker assembly.

Great video! The $184 price tag is worth the "quality" and "piece of mind" to know that the pistol won't fail from cleaning it.

I own all up the P365 upgrades. 100% satisfaction. The install instructions are very well done. The upgrades were all top notch quality and design. Fantastic products, superior customer service, and veteran owned. I'm very happy to be able to give you my money. Thanks for all you do and your service. You guys rock!

I just installed the Mcarbo titanium striker assembly along with the Mcarbo trigger and spring kit into my P365 XMacro. The difference in the trigger feel and pull is amazing. It feels like a 1911 trigger pull. Well worth every penny, thank you.

that trigger is AMAZING. My striker assembly arrives today. Keep up the great work

Bought a new TacOps, wasn’t even looking for this… but after watching this video I’m sold

I just ordered my 2nd titanium firing pin assembly. MCarbo just brought the P365 pistol family up a few notches. Thank you for a great upgrade!

Just ordered one. Please make a slide cap with fine horizontal serrations similar to what you see on some rear sights. I personally believe it would look better than the current golf ball look while providing traction for disassembly and have anti-glare qualities.

Fantastic ....just ordered the striker assembly upgrade ! I already have the Mcarbo trigger installed an ...WOW ...total game changer !

Watching the assembly and disassembly makes think glocks are very well put together

Great video - excellent pace and verbal instruction! Thank you!

Just installed on one of my 365XL’s. Night and day difference over the plastic sleeve. Now with the sleeve I have a complete MCARBO Striker assembly, paired with your flat trigger this setup is 🔥🔥🔥🔥. I’ve had no issues, functions flawlessly.

I'll add these to all of my 365 but I would like to see you offer the option for a more OEM looking slide cap

Man I wish that rear cover was serrated or knurled, not the golf ball look….killer upgrade anyhow!

I purchased this for my p365xl and was a little worried going to a lighter striker and striker spring may cause problems. I put a pencil down my barrel eraser down and tested the factory striker and the titanium striker assembly. Both shot the pencil out of the barrel, which was a good sign. I took it to the range with the titanium assembly installed and had the stock with me just in case I needed to try the oem spring. Using the assembly as sent with the 3lb spring, I had no issues. It fired everything I put into it. I showed a little striker drag on some of the rounds with softer primers, but everything functioned perfectly. I fired Remington training 115 grain fmj, Sellier and Bellot 115 grain fmj, federal hst 124 grain jhp, ammo inc 124 grain sierra jhp, and hornady custom 124 grain xtp. The sellier and bellot and hornady seem to have harder primers, but everything worked flawlessly. For my firearm, this titanium striker assembly worked perfectly.

Just bought my SS replacement part. Had the Titanium striker and love it.

The plastic deformaton is the #1 reasonbi havent cleaned my stirker channel more than once. Thank you mcarbo, ill be getting one of these soon. Ordered. Thanks for helping my edc be that much (exponentially) better.

AWESOME! I need one for my P320 now too!

Nice, I'll be purchasing one of these soon.

The spokesman in this video deserves a raise.

The Myth, The Man, The Legend!!!! ❤🇺🇲

I Like His NEW Look And The New TATS!!!!

great video

Have two of these one for my macro and one for my custom Fdez slide. Macro fits awesome, but with the Fdez unfortunately the metal sleeve with the pin to retain the rear slide plate doesn't work with the Fdez since they don't design the little hole in the slide like Sig does. I still am rocking the new striker and spring though which are top notch designing 🤙

Very nice.

Excelent product

AWESOME PART: I have installed the short-stroke flat trigger, trigger spring kit, extended magazine release, titanium striker assembly/striker housing with slide cap, and extra power recoil spring assembly - stainless steel guide rod.... love the way it looks and feels. Tested trigger pull which was 3.4-3.6 lbs. PROBLEM: This has been my EDC and I have never ever had a misfeed, stove pipe, light strike, etc of any sort until these replacements went into the gun. Took it to the range, put one in the chamber draw, pull the trigger... Click! Again.. Click! Changed ammo and Click! Some light strikes on the primers and some with no strikes on the primer. Put more $$$ into these gun parts than I paid for the gun. Thank GOD it was at the range and not a REAL situation with my EDC. Sending it to MCarbo to see what's going on. A shame love the concepts, looks, and feel. EDC? Will have to see once I get it back and put 500-1000 rounds through it. May have to go back to original SIG setup. I'll keep yah posted.

Dammit! I just ordered a trigger yesterday and didn’t even know this was an option, I def would’ve added it to my order

Well done video, very high quality product. 👍🏻🇺🇸

The main Concern with the 365 sig is exactly what you mentioned and that is Firing Pin Drag. Every Spent Casings that is fired through the 365 has a Drag Mark on the Casings. It hasn’t been a Factor with the Firing Pin.

When the striker return spring is left out it causes a CHANGE in the operation of the manual safety lever, which allows the manual safety lever to be engaged in an UNINTENDED condition, also depending upon whether the muzzle is pointed upward or downward. WITH the striker return spring INSTALLED you can only engage the manual safety lever when the striker is COCKED and ready to fire. If the striker is NOT cocked it will NOT allow you to engage the manual safety lever. When the striker return spring is NOT installed, if the striker is NOT cocked, AND you have the muzzle pointed DOWNWARD, it will ALLOW the manual safety lever to be ENGAGED in an unintended condition and lock the slide in position. If the striker is NOT cocked and you instead point the muzzle UPWARD it will NOT allow you to engage the manual safety lever. The lack of the striker return spring also causes other annoyances. Whenever I have the slide removed I always press the striker safety block inward to make sure that it is moving freely. Without the striker return spring installed the striker safety block gets held in place by the striker and I have to physically push the striker rearward. Whereas, with the striker return spring installed IT moves the striker rearward automatically releasing the striker safety block. I purchased a P365XL in December of 2022. As soon as I discovered the issues that the lack of a striker return spring was causing I stole a striker return spring from a spare striker assembly and installed it into my P365XL and eliminated the problem. I have not had any malfunctions, or light primer strikes, or noticed any problem that the striker return spring causes. Regardless of how you are supposed to operate a firearm, having a pistol operating in odd non-uniform ways that it shouldn't is eventually going to causes someone a serious problem that wouldn't be possible if the striker return spring is installed. Not having the striker return spring installed is like a having a gear shift lever that changes it's shift pattern depending upon whether you are going uphill or downhill. What possible problem would having the striker return spring installed cause??? Why would you NOT want the striker return spring installed???

A beautiful system and it's an MCARBO product so you know it's going to be better than stock and probably the best availble product regardless of price. Anyone having trouble with a dead trigger with their stock P365? It just started with mine after over 500 rounds.

I purchased this striker for my edc. The gun had never misfired until I installs this striker. It would misfire about two rounds per magazine. I decided to leave the titanium striker but reinstalled with my original springs. It working flawless again.

Can the MCARBO stainless steel striker housing replacement be used with a normal OEM Sig striker? I speak for myself, and likely for some others, that I feel uneasy replacing the striker on my CCW pistol with a something that has not had any evidence or extensive testing published. Titanium being lighter and softer than steel seems like a choice that could sacrifice reliability with various ammo types. I could be totally wrong, but I think it would behoove MCARBO to publish some kind of long term testing especially considering most people buy a SIG P365 as an EDC CCW, rather than to use as a race gun. Chris Bartocci of Small Arms Solutions posited in a video awhile back that the broken striker issues of 2019 were due to SIG releasing a bad batch of heat treatment for the strikers; it was NOT due to striker drag, which still occurs with most pistols this size that use a Browning-style tilting breech action. The steel striker housing replacement seems like a worthwhile upgrade as I wasn't even aware of the revisions or SIG's design flaw inherent in their expedient remedy. However, MCARBO needs to put out some more convincing data to convince those of us that intend to carry for protection why their titanium striker is such a no-brainer, just as if not more reliable, as well as more durable long term than the OEM striker, especially considering the striker alone is over $100. Nevermind how much "better trigger pull" might be or some such. I haven't seen anybody conduct any independent reviews to my knowledge either.

I was literally about to throw my sig away when i found out the plasic liner was going to be chewed up just by taking it apart AND THEN come to find out they only sell the WHOLE striker assembly? Thank you for literally saving my sig

I don't believe that I could ever put a titanium striker in a pistol again. Titanium is much lighter and is just a strong, but it is nowhere near as tough. I put a titanium striker in my (you're not going to believe this) open-class Glock 23 that I built back in the early '90's. Granted, I'm on the second barrel/comp combo and that pistol has at least 50K rounds through it, but the tip of the striker that contacts the primer wore down and finally would no longer fire the rounds. I switched to a skeletonized steel striker, which gave me a good bit of the reduced lock time, but is indestructible. Good luck, hopefully today's titanium alloys are tougher than the were 30-years ago. Add: I literally just read that there are titanium allows now with both great strength AND toughness! Hopefully, you're using one of them. I did love the reduced lock time. Like a single action trigger, it would fire before my poor trigger control could pull the pistol off target! Might have to try one of these in my P320 X5 Max...except it doesn't look like you have one. Oh well...

you should release a custom sear, to match this striker for perfect engagement of the surfaces

Great video and info. I will end up buying this but are many of you really removing your striker assembly after every shooting? I clean the Sig after every shooting but not the striker assembly

Of course this gets released within 2 weeks of my buying the titanium performance striker, Short Stroke Flat trigger, and Spring kit 😑But at least my X Macro Comp runs great with the upgrades 🙂

I bought two

Any way to get the slide cap in a raw finish?

Excellent video. I’m going to have to order one. Side note, I have noticed that with my Macro Tac ops that without the striker return spring, the striker will rattle back and forth in the slide. If you hold the trigger to the rear, the striker will actually play peek a boo when you move the gun back and forth.

But what if we have one with a striker return spring in it. I have your striker and just got the cup and backplate in. Should I keep that small striker return spring inside the cup and transfer it over?

Wish they were available got my short stroke trigger and springs.

You guys did it! I cant find those striker sleeves by themselves... Big issue. I'll have Danno at BILL JACKSONS pick this entire kit up for me. Rocking upgrade! Makes takedown and re-assembly similar to the rear plate on a glock, with the extractor plunger locking the rear plate on. Nice thinking.

Will the titanium mixed with the steel parts cause galling? Im curious if this will cause undo wear/safety issues. I bought one and you can hear/feel the grinding of metal when you approach the wall. The break is crisp but that grinding/grittiness brings concern. I was told by mcarbo this was always occurring, however since there is a lighter in the mcarbo i now noticed it. I told him i had the OEM spring paired with the mcarbo striker. He then recommended i polish and or oil the locking lug, check the chrome housing and check the striker slide. I am personally not comfortable polishing these item myself. Maybe i will use there polishing services. Right now i am unsure what to do because i haven’t experienced this issue with the stock parts. Maybe i will go back to OEM. Their customer service was great as he was trying to help me figure out the issue. We were talking for sometime as he walked me through tryin to figure out the issues.

Thought uncle rico started a gun channel to go along with his football videos

Would this go in a M17? This is a core piece and I’m interested in enhancing the reliability. Great video glad you’re back!!!’

Great video, but this drop in kit does not work with ALL P365 pistols. The complete drop in kit only works with slides that have the channel hole by the striker otherwise the cap lock and spring cannot be installed. I found this out the hard way and am stuck with using the plastic sleeve and OEM cap. Will Mcarbo come up with a new sleeve design for the slides without a channel? Time will tell.

When will these be back in stock????

That bent punch is driving me nuts...

Yep, my P365 drags primers. You can see a weird mark on the primer where the striker is still in contact while the case is moving to eject. I'm getting this. Correction: i just bought this.

I just ordered one I’m extremely excited I tried to clean my old one because my performance was poor and the plastic got ripped up when I was cleaning it .

Wow this guy could sell ketchup popsicles to Eskimos 😂 Lol! I'd go ahead and stick with the engineering over @ Sig any day.. Sig oem parts all the way baby!😮👍 Thanks sig you guys rock! 🔫

Effing awesome!

you said that the housing and cap are sold separately for those of us that bought the striker in the past but i dont see it on your website was hoping to pick it up during your black friday sale

Will the SS stiker housing work with the stock striker and striker spring?

Anyone know if this makes the trigger feel any better? I hate the mush and heavy trigger

Are upgrade slides typically having the notch where the spring sets. even though not necessary for current factory set up? Think of upgrading slide as next investment and would like to keep using this assembly upgrade too.

Still having trouble with the physics here. A lighter striker and lighter spring has less potential and kinetic energy to deliver to the primer. Whereas the factory unit being heaver may or may not have a longer travel time after sear release, but it delivers more energy to the primer for assured detonation. I did buy your striker, found it not reliable and sold it off for $50.

I wish that back cover for the striker was just smooth like the stock one. Don't care for all those little dimples.

no we care about the haircut. rocks dude! fits you well. ok. now to watch the rest of the video.......

Does this assembly go for the .380 as well of the P365?

I’m getting 5 of these that way I have multiple replacements because after 500 rds of ammo I’m just replacing parts at that point. What good is a credit card if I can’t use the damn thing? I pay my bill every month in full means good credit.

Hello my slide is a sharps bros and it does not have the channel for the your pin, can i still use this and is there a kit that doesn’t have the sleeve and the pin??

I shoot the xl in matches plus shoot everyday I have somewhere in the neighborhood of 2500 rds through the most recent xl. Cleaning every 300 rds +/- never had the striker apart until this weekend. I’ve had some light strikes increasing to now every other shot, not good for match shoots. Seems to be a carbon trap inside of it lol.

Will this fix the light strikes that I am seeing after isntalling MCARBO flat trigger and spring kit? Love the products, but hate the click and no bang!

Looks like a drill bit!😮

Why a stainless steel housing and slide plate instead of aluminum?

I installed it and it's great... is it safe. Idk? Would love to see it tortured and proven that its as safe or safer than the OEM since the shape is slightly different. 😅

Weight comparison?

Fit P365 Axg Legion ?

Business in the front, party in the rear

I'd like to replace my P365 Striker Safety, Take Down Safety, and Trigger Bar with precision stainless steel over unfinished MIM.

I’ve owned a pps and never in my life taken the firing pin out to clean…20 years and shoots fine. Is this really that big of a deal?

Will this work with the new P365 AXG Legion?

bro's got the jimmy neutron head

so how much lighter is it?

Taurus is making SS retaining cups for some of their striker fired firearms. I would love to see someone solve the plastic retaining cup issue. If weight is the issue with SS cups for Sig , maybe titanium cups?

Love the sub2000 from you guys. It was cheaper than buying the parts and doing the work myself. Will this fit my P366X

Dumb question, but is itvthe same for the xl version?

Love your products. Dude, you need some lotion on your hands!🤣

So to anybody that has installed their trigger, what was your solution for the safety lever that doesn't sit flush anymore? Alter the trigger bar? File the slide cap? Even though this is a well-known and widespread issue, macarbo hasn't cared enough to attempt to fix it, nor do they care enough to reply to people when you try to get a hold of them.

The women at the end did not add to the presentation. LOL

Have there been any light strikes??

How much is the reduction in trigger weight, if any?

😂, need to open up my bottom draw and dig out some loot.

Plastic. Sheeze. Currently back ordered...

My slide doesn't have the pocket for the slide cap pin 😢

Been waiting on mine for two months and just got an email it's going to be another month...🤔

$200??? Oh hell no

Why would I lighter p365 the gun us already snappy as is.

Then, why make a Titanium Striker and put it in a Steel Channel in the first place? The channel is steel. The striker spring and striker housing is steel. All of it is wrapped around a Titanium Striker. So, the cups being Titanium also would not make a difference as far as galvanic corrosion. Titanium and Steel have been used together in many applications for a very long time. Galvanic corrosion would be caused by a softer metal with metallurgical properties farther away from each other, such as copper and certain high carbon steels.

I care about that hair! Brother, do we need an intervention?

Someone smoking some good stuff because it’s selling for $200 now it supposedly sold out.

199.99 now. There is no way.

Why can Glock and others get it right and Sig is sleeping ?

From my understanding not ALL P365s

I've over paid for some parts like $60 for HK & Sig mags and felt violated but $200 for this product feels like getting rapped by Diddy. I'll buy one when you guys come to your senses and over price it at $100 like any normal company would. 200 bucks....Jesus

For $200 I can buy like 3 factory units just replace when that crappy tab breaks 🤷‍♂️😂