How To: Scythe-Ti

Рет қаралды 12,085

10 ай бұрын

Don't wait until your new Scythe-Ti suppressor is in hand! Start prepping now while you wait on your Form 4 to be approved. Check out our how-to video to find out everything you need to know about the all-new Scythe-Ti.

Пікірлер: 50

@just.some.dud3 8 ай бұрын

So, how do you recommend cleaning it? I've always just used an ultrasonic cleaner with a mild solution. Thanks.

@bluewind808 9 ай бұрын

Having last half of shooting on different hosts. gives me an honest shot report. Loving my omega 9k, and look forward to getting more form silencerCo . (keep on doing the vids with the shots with the suppressor's)

@kaptainkoolz6359 10 ай бұрын

Is it possible to get custom thread pitch direct thread mount? Looking for 1/2x20

@Moetown1986 7 ай бұрын

When can we get the standalone single port bravo end cap??

@cornbreadbrown4961 9 ай бұрын

can i put it on a 5.5" 7.62x39 Maxim PDX?

@Truckboy383 10 ай бұрын

Can't wait to see it and test it in Waxahachie this weekend!

@SilencerCo 10 ай бұрын

Be prepared for greatness.

@JPEBeard 9 ай бұрын

@@SilencerCo Is it low back pressure? High flow can? Is this full auto rated? Min 5.56 barrel length?

@Fisherdave10 9 күн бұрын

@@JPEBeard No to all of your questions.

@ricardosalazar4718 8 ай бұрын

Why does it not come with an ASR mount?

@darkangelgaming1117 9 ай бұрын

Second one was in .308 and 4th one was .30-30? Just double checking, I wasn't sure it would accommodate those rounds or not since it just says its for .30 cal, which could end at .300 BLK for all I know.

@LazarusMMA 6 ай бұрын

I love silencerco but asr mount sucks. Keymo mounted my omega 36 never been more satisfied.

@ke9938 Ай бұрын

This or the Velos 762?

@BloodEagle. 10 ай бұрын

What does this suppressor do that my Omega 300 does not? I'm always in the market for more suppressors, but of everything on the market, what sets this apart?

@SilencerCo 10 ай бұрын

The weight and length reduction. The Scythe Ti is half the weight of the Omega 300 and nearly an inch shorter all while maintaining the same great sound performance.

@brandondane4777 10 ай бұрын

@@SilencerCo how much is it. ?

@salpanahi 10 ай бұрын

Whats the difference between this and the Omega 300? The titanium body?

@Neur0bit 6 ай бұрын

Yep, about half the weight. But unlike the Omega, it is not full-auto rated. So, choose wisely…

@genocidelves 10 ай бұрын

How does it compare (DB) and sound to the SAker and Omega300?

@YZFoFittie 10 ай бұрын

THIS

@SilencerCo 10 ай бұрын

Produces near identical numbers as the Omega 300 and is quieter than the Saker 7.62 on all calibers.

@YZFoFittie 10 ай бұрын

@SilencerCo so the benefit for us Omega 300 guys is just weight right?

@SilencerCo 10 ай бұрын

@@YZFoFittie The Scythe Ti weighs 8.3oz and the Omega 300 weighs 14.8oz.

@1olddirtroad 9 ай бұрын

Just saw one today at my local sporting goods store. Scary Light! I am putting this on my GPR

@chuckbersamin1482 10 ай бұрын

can you use this on a 7mm prc?

@SilencerCo 10 ай бұрын

Absolutely.

@scottshreve3298 6 ай бұрын

when are these going to be back in stock?

@SilencerCo 5 ай бұрын

Capitol Armory has them in stock right now! www.capitolarmory.com/catalogsearch/result/?q=Scythe+ti

@YZFoFittie 10 ай бұрын

What's the signature under NOD's?

@BetweentheCheeks00 10 ай бұрын

Considering this can has a muzzle brake end cap and is not meant to be used for tactical hard use purposes, I would probably say that maintaining a small signature under nods was low on their priority list of features for this can.

@YZFoFittie 10 ай бұрын

@austinfloeter565 my Omega 300 has a much more substantial brake, and due to it NOT having titanium baffling, doesn't emitt white sparks. What makes you think this can, "is not meant for tactical use"?

@BetweentheCheeks00 10 ай бұрын

@@YZFoFittie Because it says specifically on their website who they intended the suppressor for. This can could not withstand a sustained firing schedule needed for tactical/gunfighter use. The titanium would be well over 800 degrees after two magazines which is the failure point for a Titanium suppressor. A can more suited to hard use/tactical purposes is their Velos LBP which is made out of Stainless and Inconel. Which they also state that on their website.

@YZFoFittie 10 ай бұрын

@austinfloeter565 I'd love to see you get the can that hot on a bolt action or a 300 Blackout on subs...

@BetweentheCheeks00 10 ай бұрын

@@YZFoFittieYou must be a navy seal because I don't know of anyone else running around at night with a bolt action and nods worried about their IR signature lol use the can how you want dude, no one is stopping you

@OGGENEISS 4 ай бұрын

What is the first gun in the vid ?

@SilencerCo 4 ай бұрын

Q-Fix chambered in 300blk.

@MG_Sid 10 ай бұрын

I want to know more about the firearm platforms used. 😅

@sick7six1 3 ай бұрын

GF Bolt Action Carbine; probably in 8.6 blackout.

@msquared9605 2 ай бұрын

@@sick7six1definitely not 8.6, this is a 30 cal can

@juandelacruzalvarez8961 10 ай бұрын

Does it come with the piston and mount?

@jonquirk9582 4 ай бұрын

None of sicos suppressors come with the nealson piston

@bennettgeilmann820 10 ай бұрын

Why didn't you shoot the pond??

@jonquirk9582 4 ай бұрын

Because shooting water is not a smart idea. Bullets can ricochet off water

@bennettgeilmann820 4 ай бұрын

@@jonquirk9582 and there isn’t a mountain behind the pond to stop it even if it did??

@rtardbox 10 ай бұрын

it's a bullshit raffle...

@brandondane4777 10 ай бұрын

Will this match up with my hybrid 46 attachments? Work with a 7.62x39 Gail ace ?

@SilencerCo 10 ай бұрын

Yes, on both accounts.

@brandondane4777 10 ай бұрын

@@SilencerCo awesome. I’m looking for something shorter that will work on 7.62x39 and my 556. I have the hybrid and a keymo adapter for it. And the asr adapter. Cause my 13.7 pined and welded uses the Knox flashhider from solgw and I want something that will fit both. With out having to buy more adapters