Custom Rustic 3d Eagle American Flag made on CNC Machine

No video

Custom Rustic 3d Eagle American Flag made on CNC Machine

Рет қаралды 12,607

4 жыл бұрын

Custom 3-D rustic American eagle flag made on a CNC router using Vcarve desktop to design it and Shapeoko 3 XXL to cut it.

Пікірлер: 43

@southernmanC 2 жыл бұрын

you should have done some NODE EDITING around the eagle head

@brentncindy9023 5 ай бұрын

Looks great! Are you using a router or a VFD spindle? Trying to decide if I need to spend the extra $$ on the VFD.

@gthmcty111 4 жыл бұрын

Been bit since I been on youtube but I see you are still banging out some AWESOME videos Sizzle!!! Keep it up, now I need to go back and check out your other vids I missed lol!!!

@bobbyjordan2882 4 жыл бұрын

Gorgeous. Absolutely stunning.

@kyleh5221 4 жыл бұрын

awesome job sizzle it looks awesome

@Charlie-qd3qs 4 жыл бұрын

Dude your awesome. I'm trying to do more with my CNC but need some guidance!

@Sizzle99 4 жыл бұрын

Charlie M ask away!

@Charlie-qd3qs 4 жыл бұрын

@@Sizzle99 how do you do extended flags on your shapeoko? And what router are you using?

@davidjennings2733 3 жыл бұрын

@@Charlie-qd3qs Hey Charlie, it depends on the software you are using to create the flag or design. If your software allows you to do tiling you can create tiles within your project and move the work piece accordingly. Best is to search youtube for tiling cnc... Hope this helps, btw I just started doing tiling myself with VCarve Pro... a little pricey but worth it.

@benjaminl3084 2 жыл бұрын

Thanks for sharing and including your error. It's nice to see that we all have the unexpected happen and you made a very nice recovery! Just wondering did you face glue two pieces of select pine together for this flag? Do you still have this file available because the link says its not. Just wondering! Thanks again!

@Sizzle99 2 жыл бұрын

This is my design and yes I still have it. Send me you email and I can send it over

@benjaminl3084 2 жыл бұрын

@@Sizzle99 did you face glue two pieces together do get the depth for the eagle?

@jeffverdin6105 3 жыл бұрын

We have all been there before on the Z axis stuff 😂 I cringed and felt your pain on that one.

@patriotwoodworker6092 2 жыл бұрын

Did you glue a square piece for the eagle onto the flag body?

@andreww6738 3 жыл бұрын

Not much more I can say apart from what the others have already said, but I'll say it anyways...Awesome! Question and comment, Was that acrylic paint you used and then burnt it or something else? Love it!

@Sizzle99 3 жыл бұрын

Water based stain first then burn

@lifetofeel 3 жыл бұрын

Amazing! Do you know if a shopbot desktop can do this with vcarve?

@pwrstroked 3 жыл бұрын

Awesome carving! How did you get vcarve to face the top of your bottom board?

@desiraewoodside8620 2 жыл бұрын

This is beautiful! Is the file available? Great work!!!!!

@Speido307 3 жыл бұрын

What kind of wood did you use for this project?

@Sizzle99 3 жыл бұрын

Premium pine

@SYKOK1LLER 3 жыл бұрын

I assume you used a 60 degree V-bit on the stars? Also how deep are the stripes? Feed and speed somewhere in the middle?

@Sizzle99 3 жыл бұрын

.075 for stripes 19,500rpm 90 ipm feed rate and 40 ipm plunge

@mattleone5831 4 жыл бұрын

So great

@russellcorcoran2231 2 жыл бұрын

Are you selling any of the flags with the Eagles ?

@russellcorcoran2231 2 жыл бұрын

If you are selling how much?

@Sizzle99 4 жыл бұрын

If you’d like to buy this click on the link etsy.me/2LdQBXl or if you want to buy the design send me and email.

@scotthamel7928 4 жыл бұрын

I need this file. How can I buy it!

@Sizzle99 4 жыл бұрын

Scott Hamel do you have Vcarve or aspire

@jamessitton8292 3 жыл бұрын

Sizzle CNC I’d like to purchase this file also, I use Vcarve Pro

@Sizzle99 3 жыл бұрын

James Sitton etsy.me/3mBgAWy

@jamessitton8292 3 жыл бұрын

Sizzle CNC Ty ever so much. You have definitely been a great to my progress on my xl. Your videos are Greatly appreciated, I have learned so much from all your videos. Please continue doing what you do. Your fan in Virginia