Sliding Bypass Doors Part 5

Рет қаралды 3,952

7 жыл бұрын

Sliding bypass doors are a great choice for places where a swinging, hinged door might take up too much space. In this video series learn how to design sliding bypass doors, choose and use the hardware, and build strong doors with haunched tenon construction that will be beautiful, last for years, match your decor, and slide easily.
Part 5 concludes this series with the insertion of the door panels, glue-up, finishing, and installation of the rolling door hardware. The finish is shop-mixed shellac and General Finishes Arm-R-Seal.
While building these doors, Steve developed a spreadsheet that will help with the calculation of door height, door width, and rail length. The spreadsheet also includes supplementary instructions for the rolling door hardware. It can be downloaded for FREE by clicking on this link:
www.downtoearthwoodworking.com...
To see Part 1, click here:
• Sliding Bypass Doors P...
To see Part 2, click here:
• Sliding Bypass Doors P...
To see Part 3, click here:
• Sliding Bypass Doors P...
To see Part 4, click here:
• Sliding Bypass Doors P...
Music...
"Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons.org/licenses/b...

Пікірлер: 17

@cuban9splat 7 жыл бұрын

I love how you take your time to do the job right. Getting in a hurry almost always lets a little mistake into the project. Very nice work Steven. Thank you for sharing it with us.

@lewisprentice243 7 жыл бұрын

Nice work Steve. Always a pleasure to watch your videos. Can't wait for whats next!

@lakebum6211 7 жыл бұрын

Beautiful work Steven. I'm always impressed with your work. I love your shop too.

@BryanCollette 6 жыл бұрын

This is my first series of your's I have watched and I just watched all 5 videos. Loved the series and will definitely watch more - thanks!

@downtoearthwoodworks 6 жыл бұрын

Thank you so much!

@Bill.L.Carroll 7 жыл бұрын

Looks fantastic mate, love your work. Thanks for sharing.

@AlWheelin 7 жыл бұрын

Always like the details.

@markpalmer3071 7 жыл бұрын

Great video, very helpful as always.

@leviathanx0815 6 жыл бұрын

The outcome looks really nice... :) Though, the interesting part is that you put the hardware in top AND bottom. Never saw this variant before here (Germany); usually it's installed in bottom only... As for the "missing instructions" for the hardware: I am pretty sure I saw some once.. Might come back to you if I can remember where...

@FountainCityVol 7 жыл бұрын

Loved the sliding door series. Just a heads up, ArmRSeal is a wiping varnish, no an oil/varnish blend. My favorite finish also.

@TheGeekPub 7 жыл бұрын

ArmrSeal is an oil and urethane blend. I have a can not 3 feet away and it says it right on the front in huge bold letters. ;-)

@FountainCityVol 7 жыл бұрын

Arm R Seal is a film forming finish...its a diluted varnish. Don't believe everything you read on a can of finish.

@TheGeekPub 7 жыл бұрын

If we can't believe what the manufacturer says, we're all in trouble.

@FountainCityVol 7 жыл бұрын

TheGeekPub 🙂

@derKarl_stp 6 жыл бұрын

to insert those wheels into the holes... try pressing it in with a clamp and counter the force needed with your workbench top or a board on the other side... you can get a lot of pressure with those things by hand and it might be safer for your fingers as well ;-)

@downtoearthwoodworks 6 жыл бұрын

I tried a regular bar clamp and it kept slipping off because the wheels are slightly rounded. But now that you raise the question, I am betting a wood screw clamp would do the trick. Thanks!

@derKarl_stp 6 жыл бұрын

I for normal use a one hand quick clamp (ratcheting type) or a regular F-clamp with a piece of thin plywood for such work and for normal this works pretty good on me... I don't have wood screw clamps but they indeed might help you as well