Snap On Tools That Are JUNK: Stay Away From These Tools. DO NOT BUY THESE SNAP ON TOOLS

Рет қаралды 158,670

Күн бұрын

Here is a list of Snap On Tools that I think SUCK really bad. I am a fan of Snap On but I think they truly missed the mark on these!
Thanks for watching ! I truly appreciate each view that I get on each and every video.
If you are interested in Koon Trucking or Diesel Medic shirts are stickers there should be a link to the teespring store where you can purchase these items.
If you aren’t subscribed to my channel, please subscribe, it doesn’t cost you a single dime ! If you like my content be sure to hit that “Bell” and it will notify you when I have a new video come out.
Here are some of my favorite links to get some super cool items off Amazon.
Be sure to check them out (just clicking my link and getting to Amazon helps to support the channel. Even if you don’t buy the item listed, just using my link and then choosing another item will help)
Irwin 34 pcs Bit Set (same as Matco MQC34C) for $47.99 vs $153.85
www.amazon.com/gp/product/B00...
Milwaukee 3/8” adapter to convert your impact into a 1/4” bit driver:
www.amazon.com/gp/product/B00...
Vampire Tools Kevlar Shears (these bad boys will cut, designed to cut Kevlar so you know they are tough, I love these things!) : www.amazon.com/gp/product/B00...
Vampire Tools 8” Extraction Pliers (these things are amazing):
www.amazon.com/gp/product/B00...
Vampire Tools Super Combo Scissors (these things will cut anything! I’ve cut a bunch of pennys in half with them and they stay sharp):
www.amazon.com/gp/product/B00...
Lang Tools Master Feeler Gauge Set (the most complete and best feeler Gauge Set I have found):
www.amazon.com/gp/product/B00...
Power Probe Master Combo Kit (this thing makes finding broken wires a breeze):
www.amazon.com/gp/product/B00...
OEM Tools Magnetic Rechargeable Light (the battery life is amazing on this light and it is very bright):
www.amazon.com/gp/product/B01...
Knipex Cobra Pliers (some of my go to Pliers):
www.amazon.com/gp/product/B00...
Streamlight Stylus Pro Rechargeable Flashlight (I carry this in my pocket daily):
www.amazon.com/gp/product/B00...
Coast A9R Rechargeable Penlight (this is an amazing light, wear it in my shirt pocket, the circular beam is awesome!):
www.amazon.com/gp/product/B00...
I use Tub O Towels to keep all my tools looking nice and clean. Here is the link to them:
www.amazon.com/gp/product/B00...
If your tools are stained or really dirty then Citrol is your friend ! This stuff works magic on rubber grips, impact guns, plastic etc. :
www.amazon.com/gp/product/B00...
Email: koontrucking101@gmail.com
Koon Trucking
200 Davidson Dr.
Booneville MS 38829
Follow me on Instagram: KoonTrucking
Check out www.vampiretools.com and use the Coupon Code: KOON15 for a 15% discount off your entire order plus get free shipping to anywhere in the Continental U.S.
Be watching for upcoming videos as we put these Vampire Tools to the test !

Пікірлер: 534

@KoonTrucking 4 жыл бұрын

For everyone that thinks I am just bashing on Snap On that is not the case here. Just a few tools that I think are not any good. They have a bunch of excellent tools here’s my top 10 list kzfaq.info/get/bejne/hN2Uaphe39OqhJs.html

@tssmallenginerepair6900 4 жыл бұрын

I agree on the 18 volt 1/2 drive I have two of them and they don't have but 200ftlbs of take off power

@doctordiesel5467 4 жыл бұрын

Hey have to agree with your list I use the slim vise grips for away bar end links when you need to get behind the pinch part of the joint I get I end links done before teeth are non existent anymore I can't believe no one else makes a slim pair for this application I have 3 pairs of the Slim's to do endlinks when they have no hex or flats to hold I'm up in ny rust belt rusted seized fasteners are a given

@doctordiesel5467 4 жыл бұрын

Thunder bits more like butter bits

@patrioticimmigrant8817 4 жыл бұрын

I thi k snapon could do a few inexpensive things to improve thier products to make them over the top. Like adding the quick release nut on the cordless grinder geeez or a better aH battery or making thier batters water resistant.

@fw1421 4 жыл бұрын

Koon Trucking Most Snap On tools are hugely over priced and their tool boxes are absurdly expensive!

@CS_Concepts. Жыл бұрын

Couldn’t be happier with my Milwaukee 1/2 impacts. Especially for the price difference. I’m always taking off semi lugs with it at work. Just can’t buy into snap on power tools, And I have quite a bit of their hand tools 🤣

@roscobear6143 4 жыл бұрын

But if you buy $1k worth of tools you get a free hat

@danohstoolbox 3 жыл бұрын

A friend of mine bought 30.000 worth to get the big snap on sticker LoL

@Elpiojo96 3 жыл бұрын

No $900 dollar backpack and a free 1/2 gun

@ItsKing32 3 жыл бұрын

So u buy 2 things u get a hat basically

@adrianramirez1245 2 жыл бұрын

Lmfaooooooo I’m dead 💀💀💀

@roberthemsath6602 2 жыл бұрын

Wtf we just dropped 1,100 and didn't get a damn hat lmfao

@coreysuttles1362 4 жыл бұрын

Great video, I really appreciate that you are always honest!!! I would love and really appreciate if you would do some more how to videos on big rigs. Your videos have helped me make some money and I always enjoy learning new ways to do stuff!!

@tobbytownsend9968 4 жыл бұрын

They all have some bad apples, we just have to find the goods. Without honest reviews like yours a lot of these Wrenchers would be lost. Thanks for another great video. I Appreciate all the hard work you put into bringing us such great content, Thank You Mr. Clay.

@fedorapiper2841 4 жыл бұрын

Hey Clay, you are right about the locking pliers. They suck! Can always count on you for an honest review. Great job!

@scotthabkirk6434 4 жыл бұрын

I bought that exact 1/2" drive coardless impact about 5 or 6 years ago and it worked great for what I was doing (changing tires) but when I needed to take off an axle nut on my personal car at home it wouldent wvwn budge it. And as far as the 1,000 cycles for warranty its 1,000 charges on the batteries. If you hold down on the button to indicate the charge it will start flashing at the different bars to tell you how many times that battery has been charged. I forget what each bar references for charge amounts tho. But I recently bought the Milwaukee M18 Fuel 1/2" friction ring, high torque one key and it's a beast. It weighs a little bit more but it has the power to back it up 100%

@bobbygarrett9588 4 жыл бұрын

One of your best videos, Thanks again Clay. I owned 3 through 5 on your list, and thanks to the Snap On Gods, Ross stopped showing up. And Eddie my Matco Rep did. Thanks for another great video!

@dj85rocco 3 жыл бұрын

The new brushless pre polish tool is amazing. I've been using it since it came out with 0 issues with it. I use it daily for small scratch removal and headlights

@WBOS72 4 жыл бұрын

Love the honesty Clay! Keep up with these vids.

@thebruteforce1 4 жыл бұрын

I love my Milwaukee vice grips! They have a tab with a hole in it on the end so once you have them attached, you can stick a screwdriver thru it and tighten it up even more

@fartnocker86 4 жыл бұрын

For sure agree with all those . Only thing that surprises me is the 1/2 impact because their drill in that platform will about twist your hand off your wrist if you arent careful. Keep up the awsome videos.

@felixf5211 4 жыл бұрын

Good video. Surprised to hear about the drill bits. That kind of scratch buys some excellent twist drills.

@brianwalls6295 4 жыл бұрын

Thanks for the heads up. I couldn't part with the money for the impact and bought a milwaukee... pretty impressed with it.

@hollerbredkennels3579 3 жыл бұрын

U hit the nail right on the head brother! I have used each and everyone of em and I totally agree!!!!

@nevillepretorius8948 4 жыл бұрын

Great video Clay, agree with your list dude 👍 I love Snap On, but they do have hits and misses, cant be good at everything. I took your advice on the Irwin locking pliers, they are awesome 👍

@dyer2cycle 2 жыл бұрын

...try Snap-On's new USA made locking pliers made by Malco in DeWitt, Nebraska..old Vise-Grip factory...they are typically Snap-On pricey, but are top notch...and they blow the Chinese-made Irwin's out of the water..you can also buy them from Malco, branded Malco Eagle-Grip, but they are not much cheaper than the Snap-On versions...

@drwisdom1 3 жыл бұрын

Another good video by Mr. Koon. I almost always buy Snap-On tools because I am risk averse and haven't had negative experiences beyond cost. Luckily I use hand tools instead of power tools so I didn't make the mistake of buying items #4 through #2. I don't buy expensive disposable items like Snap-On drill bits so have never considered buying item #5. I have had two sizes of vise grips, the tool of last resort, for at least 30 years so I never bought item #1.

@aaronforward1004 4 жыл бұрын

I agree the 1/2 inch impact feels much heavier than in needs to be. I have bad shoulders and i only use it when absolutely needed (like in the junkyard where i dont have pneumatic)

@dirtfireservices 4 жыл бұрын

Milwaukee battery tools work best for me. Ive bought 2 different snap on battery powered tools both didn't last or work very well. Thanks for your reviews.

@juno4494 4 жыл бұрын

Yes, Milwaukee power tools are the bomb--all I use, anymore.

@tssmallenginerepair6900 4 жыл бұрын

I agree almost all my battery impacts are snappy and I won't replace them with snap on again

@doctordiesel5467 4 жыл бұрын

@@tssmallenginerepair6900 Milwaukee is better and cheaper

@staalcyclesecurities1423 2 жыл бұрын

For snap on power tools i buy hilti

@j.santiago7022 4 жыл бұрын

You need to know: I’m not a mechanic or tech I don’t buy or own tool truck tool. I’m a subscriber and regular viewer since finding your channel. I enjoy watching because... I do. Thanks for taking the time to make and share these videos.

@KoonTrucking 4 жыл бұрын

Well thanks for watching. I appreciate it.

@jamescaron6465 2 жыл бұрын

I have sets of Snap-on wrenches, ratchets, sockets and screwdrivers I have had for over 30 years, but in these cases, you are not wrong. I haven't tried their locking pliers but in everything else you are spot on. Their cordless tools leave plenty to be desired and now I stick to Makita and Dewalt.

@gophersanders6542 3 жыл бұрын

I’m a heavy equipment mechanic and I’ve had really good luck with the Ryobi cordless impacts. I get about a year out of it, for $100 you can’t beat it

@hollerbredkennels3579 3 жыл бұрын

Agree 💯

@DolphinsEatFish 3 жыл бұрын

you can get a makita for $60 brand new and the XDT11 has lasted me about 7 years of daily use

@gophersanders6542 3 жыл бұрын

@@gl9500 I tried a Milwaukee and wiped it out in under 6 months

@gophersanders6542 3 жыл бұрын

@@gl9500 it was the 1/2” impact. I use it for belly pans. I was not aware of the ownership details.

@gophersanders6542 3 жыл бұрын

@@gl9500 no I haven’t

@rlwillett 4 жыл бұрын

Glad i watched this ive been out of work for a broken wrist and was planning on buying the polisher when i got back

@KoonTrucking 4 жыл бұрын

Save your money and buy a pneumatic adapter or Milwaukee. If you watch the video (I put a card at the top when the polisher first comes on, then when you click the video it’s around 4:20 mark on it, there’s a comment pinned with the time stamp and you can see the polisher in use and hear where that was #3 I burnt up and also see the footage. I was shooting a video when it happened)

@josephpuchel6497 4 жыл бұрын

Hey Clay. I agree with you on this video. We pay good money for Snapon but if it’s not living up to expectations it should be called out. The 14 volt tools are nice and handy but if they keep breaking down then Snapon should look into it and make adjustments or credits. I purchased the 1/2” impact and not too impressed with it. Excellent video.

@KoonTrucking 4 жыл бұрын

You are exactly right. They should fix known issues. Car companies have and we use these tools to fix cars so Snap On should have to fix these issues also. We depend on tools to put food on our tables and a roof over our heads.

@georgef1176 2 жыл бұрын

I just got Lang snap ring plier set, it’s sweet, set of 3 sizes with removable tips. I’m gonna try some more of Langs pliers.

@TONYSTARK-jh2wu 3 жыл бұрын

Thanks for this video because 3 of these where on my shopping list

@samuellacosta4025 3 жыл бұрын

Man those locking pliers broke my heart when i tried using them to pull a broken stud out. The vise grips pulled it out no problem.

@ClientGraphics 4 жыл бұрын

Snap On has some good stuff but totally agree with you Clay those products need to go and are not worth purchasing. As always you are 💯% right on the money!

@travisgustin4677 4 жыл бұрын

I’m a flat rate tech at a Honda dealership. A real busy one at that. I started recommending headlight polishes for a half hour when the guy on my team next to me bought a snap on polisher. It used to get hot as hades in my hand. Was always scared it would burn up when I was holding it so I bought the Milwaukee kit with two batts and a charger for 170 shipped. Has adapters for polishing and a 2” adapter for rol loc cookie wheels and such. Things a monster. And it has a handle that’s removeable and can go on the right or left and a button for a tool-less change between the two apadters. I would highly recommend it to y’all!

@kenthelawnguy 4 жыл бұрын

LOL, great list brother.. 300 bucks for drill bits, WOW!!!

@dchqrestorations379 3 жыл бұрын

Especially since Mac drill bits will run you a little less for the set, and they are lifetime warranty when you do break one.

@abutcher2074 3 жыл бұрын

I’m very happy with my Norseman drill bit set. I use them almost every day and they perform excellent. Low drill speed and cutting oil helps too

@thomasphillips4485 3 жыл бұрын

I can second those drill bits suck I bought them when I first came in the shop from the fuel island had them for a month before they started breaking on me

@mattberg6816 3 жыл бұрын

I buy the champion cutting tools mechanic length cobalt

@toddtech10962 3 жыл бұрын

Interesting, bought these off the truck and I did break a smaller bit but was user error I was being to aggressive. These bits are good and cut like butter if you actually lubricate them and stay straight so I disagree but I didn’t like the 300 price tag lol. I’ve used the for a lot of extraction and thread repair no issues. I got my snap on brushless drill behind them and they work great together the gun will back off before it will break a bit.

@MrCole344 3 жыл бұрын

Almost screamed out YEEESSS when you set the locking pliers at number 1

@vxscenario1359 3 жыл бұрын

I personally use and love my 14.4 volt prep and polish tool. Got it as a gift from my father. Had it for a few years and it has given me 0 trouble except for after using it hard for a while. It does get pretty warm and will safety shutoff before it burns up. But other than that I love mine

@jefffoushee2816 4 жыл бұрын

I have the polisher and havent had any problem with it, however, ive used it maybe twice, and it has gotten hot on me several time. So we will see, its awesome that your snap on guy did that. Love you videos thanks a bunch

@KoonTrucking 4 жыл бұрын

I have got the best Snap On man on earth. He will stand behind his stuff every time. Hamilton is a great guy on and off the truck. He’s hard to beat. I’ve said it before if he started next week running a harbor freight or a sunnex truck that’s what I would be buying. It all boils down to the dealer and fortunately we have a great one.

@ryankyer3443 4 жыл бұрын

I’ve had the prep polish tool for 3 years no issues! and the 1/2in drive Impact for 3 year and agree that you can buy a stronger for cheaper but it still zips off lug nuts and hasn’t needed repair, and yes the snap on vide grips suck. They were good for about 2 weeks then the teeth wore off them and the release mechanism bent to shit

@joemagarelli1356 4 жыл бұрын

Clay I’m a Kool-aid drinking Snap-On believer myself. It pains me to watch this video but your 1000% percent right. It just shows if you keep your head in the sand you’re not buying the best tools for the job. As always another great job and thanks for your hard work.

@KoonTrucking 4 жыл бұрын

There’s no doubt that I love Snap On tools, it’s obvious but they have some bad ones like everyone else.

@doctordiesel5467 4 жыл бұрын

@@KoonTrucking agreed

@brandonsizemore3619 4 жыл бұрын

honesty and fairness is why I like your channel so much. keep up the good work. appreciate it! they definitely have some great tools, tho overpriced, and of course they will have some turds.

@johngalvan723 4 жыл бұрын

Good review Thank you for your Honesty

@mattbrennan8088 4 жыл бұрын

totally agree with the locking pliers- I have a few- and never had any luck with them. Turned them in for new ones, same thing, they suck. Now they just sit in my tool box

@dyer2cycle 2 жыл бұрын

Get the new USA Malco-made ones Snap-On offers..they don't suck..far from it....

@DR440 4 жыл бұрын

I have a starter button from Snap On but it's from the early '80's and still works fine. $300 for drill bits is insane. I bought some Milwaukee split point bits from Home Depot on sale for $20. I'm very impressed with them!

@mikewarpula911 Жыл бұрын

The old starter switch in the black rubber boot was indestructible, they put a pretty dress on it and it was at least 2 times the money and no good.also there Cummins and Detoit injector puller was worse than there vise grips,every thing about it was wrong.

@mikeashford9240 4 жыл бұрын

Wow thank you I will be staying away from the Snap-On battery operated tools if they are that bad and I will head your work at that price as I only spent a little over $ 200 dollars today on the Snap-On truck ya I was updating some of the extra parts on the Universal Joint Ball Press Press my Father purchased back in the 1950's and yes it still works fine and I have no intention of buying new Snap-On tools and being like my Father paying a bill more then a decade after forced retirement ...... Great Video and thank you .....

@georgeolinger198 4 жыл бұрын

Good review i have old Milwaukee cordless impacts and my starter button from 1982 still works using cheaper internals i bet ?

@donkim3493 4 жыл бұрын

I bought the Matco 1/2 impact and love it.

@OUSWKR 4 жыл бұрын

I bought my 18 volt snap on impact a few years ago and was $200 cheaper than what you show the kit being on line. I use it Day in and day out and is a great impact for automotive use. I do feel the replacement batteries are over priced but there’s less than $5 difference between the snap on 18 volt battery and the Milwaukee 18 volt battery so I can’t knock snap on too bad for that since the tool it is competing with is in the same price range.

@davidkanengieter 4 жыл бұрын

Very spot on video. A co worker has the 18v 1/2" mpact and it is a gutless wonder. It's no better than my 1st gen DeWalt.

@KoonTrucking 4 жыл бұрын

Gutless wonder hahaha man that’s funny. I will have to use that one ! Thanks for watching and taking time to leave a comment.

@cassteffy5509 4 жыл бұрын

I've got to agree with the battery impact. I've got one and in the past 3yrs I have sent it back 3 times for the no power. I'll just stick with air

@blazebox71 4 жыл бұрын

I definitely agree with all of these for me personally I won't buy any of the snap on cordless stuff I think its way to overpriced and much lower quality than most if not all of the cheaper competitors out there, if your looking for another solid starter button I would reccomend the OTC one the last one I had lasted forever and I just now bought a new one, also on tool truck drill bits mac will warranty theirs if they are broken so that's basically an endless supply of cobalt drill bits if you buy their set which I think is like 300 to 450 bucks a set depending on which one you get

@8ighty0netv5 4 жыл бұрын

You're right about 1/2 inch impact I wish I would have known about the Ingersoll Rand impact before I bought this one I am disappointed because it won't even take off the infamous Honda Bolt even with the special socket it still takes about 10 minutes to break it loose

@rahrah8076 4 жыл бұрын

Milwaukee tools are awesome and the prices are just right

@desarioe 4 жыл бұрын

TOTALLY agree on the 18v 1/2...bought that POS. thought no bolt nut stood a chance, So wrong. Thank you Milwaukee. Disagree with the prep tool, love mine.

@8dilly 4 жыл бұрын

I bought my kit used.I hated it as soon as i used it..Overpriced junk..My Milwaukee is my go to gun for anything....

@gregcothrum4045 4 жыл бұрын

Good video y'all have a good one and stay safe 👍

@2muscleman2 4 жыл бұрын

Thanks for the laugh. Tape .25¢ to the locking pliers so they're worth something. Pure genius.

@jackdauphin7741 4 жыл бұрын

Thought that it was ironic that the polished(TURD) was #2. Made me laugh 😂 Clay.

@diyweekendwarrior 2 жыл бұрын

I was wondering why a friend/fellow mechanic left me his Snap on locking pliers in my box!🤔🤣

@redwarrior320 4 жыл бұрын

I agree with you on the CT 8850 I am on my third, one blew trying to get a lug off of a small car!, and the 14.4 polisher! Those are absolute GARBAGE! $300 for drill bits is ridiculous! I am about to get a Milwaukee gun.

@eternalmaddness 4 жыл бұрын

I got my CT8850 for a steal so I’m not too down on it. Takes off everything i need it to but i also work on cars so I’m not really challenging it.

@josephriddle2772 3 жыл бұрын

Yep Clay i no all about the snap-on locking vice grips, "junk!!!" And i have problems with my blue point ones also, my old snap-on dealer wold not warrant them., well he no longer sell snap-on tools, he quit.

@georgef1176 2 жыл бұрын

Clay one of good tools I have I didn’t think I’d use much, the drill doctor, but you gotta get the best version it does the different points. It’s way better then just using a grinder too sharpen or buying new bits. I tend to use Tap Co. And Milwaukee bits.

@martinschaffmeir7729 4 жыл бұрын

I do and my son, we both use the CT8850 for automotive lug nuts. Its pretty good for that. I don't think i paid 850. For it i bought it with the 3/8 gun and 3/8 ratchet combo.

@Matteo-lr6ke 4 жыл бұрын

The 1000 cycles warranty refers to total charge cycles. There is a way ur 18v batt can read how many times its been charged and display it. I think if you hold the batt level indicator button down the lights flash each figure its been charged.

@marcoflores737 4 жыл бұрын

I have a snap on box and a lot of snap on tools but I have put the m18 high torque head to head with the snap on m18 was lighter and stronger for the snap on price I bought 2 m18 guns and still had about 200 bucks left over

@peterbreslin1349 4 жыл бұрын

I agree with your list but man there’s something about a snap on wrench motivating you to work! I don’t know what it is but dang I get so happy working with a snap on wrench I don’t know why!

@KoonTrucking 4 жыл бұрын

I know the feeling. Haha 🤣 those that don’t have one can’t understand that.

@dyer2cycle 2 жыл бұрын

..because you are relieving some of the guilt you felt paying so much for it..you are making money with it when you are using it, thus helping justify the purchase.. :)

@michaeledwards6335 3 жыл бұрын

I agree with all these. Thank you for sharing the truth. Good and bad with Snap On. Just because it says Snap On does not mean its always the best. I always enjoy your videos.

@mho6129 4 жыл бұрын

8850 early version come with a different motor and often it run low on power. The later version is not too far off the Milwaukee one. Luck my one was replaced under warranty or it will cost me another $3xx to replace the motor. but the weight still makes me want to swap camp to M

@rolandgutierrez813 3 жыл бұрын

I Love Snap On , but , its good to know what sucks ! Lol , Thanks for the heads up ! the big gun you have may have been their early model piece of crap , i have the newer 1/2 18vHO CT 4850HO and i have given it hell and it works great ! i also have the newer version than the piece of crap you have , 3/8 18 v CT8810 AC and that works great as well , no problem with them , i give them a hard time and they keep going ! Lol

@raymondwoodhull1949 3 жыл бұрын

I have 2 pairs of your #1 junk tool, the lp7slim. I use them to hold and move camshafts on 5.4l 3v engines. They are great for that purpose.

@danleemann 4 жыл бұрын

Drilling holes through steel is an art

@johnmaxx4818 2 жыл бұрын

I agree with you on the drill bits been they're done that what should make your list is the cordless reciprocating saw, the dewalt smokes , it's garbage

@JustinDowDIYcentralhighway 4 жыл бұрын

Nice List Brotherman!!

@larryborkstrom3580 4 жыл бұрын

I have to agree with you on the locking pliers drill bits I never use those so I can't really say when it comes to impact wrenches I prefer the air powered ones

@dyer2cycle 2 жыл бұрын

...Get their(Snap-On's) new locking pliers made by Malco in USA, you will be impressed...those in the video are the ones made in Spain by Grip-On...forget their drill bits....

@larryborkstrom3580 2 жыл бұрын

@@dyer2cycle already did love them

@darwindropmazda 4 жыл бұрын

100% agree with you brother!

@heavydsunlimitedservice5741 4 жыл бұрын

My S-O dealer wont sell you the grip--ons. He keeps irwin on the truck... pretty sad... I just bought knipex locking version and they are definitely worth $50 a pair

@anthonyesposito2576 4 жыл бұрын

Just bought my first set of Knipex pliers and I find they have an amazing feel and amazing performance. Not the easiest on the wallet, but worth ever penny imo. Only regret is not needing them as much as I would like lmao

@brandonsizemore3619 4 жыл бұрын

snatched a pair of Knipex for $10 at a pawn shop! awesome! Also got most of the USA Irwins, never fail

@6548ww 3 жыл бұрын

I’m a big fan of Snap On Tools as well but after having owned many of their tools have found they really don’t hold up any better than some of their lesser expensive competitors say like GearWrench tools in my opinion is the Best Bang for your Buck and they offer a pretty good tool selection too. With that being said I’m not going to get rid of any of my Snap On Tools keeping what I have but I doubt I will ever spend several thousand Dollars again to buy them like I did the first time. I guess the prestige of owning Snap On Tools make a good conversation with the guys at work.

@orng1 4 жыл бұрын

It surprised me you hate the 1/2" impact , all my coworkers seemed to love it. I went with the dewalt to make it easy for myself in batteries.

@KoonTrucking 4 жыл бұрын

Shoot that Milwaukee 2767 will twist the anvil smooth out of that 18 volt Snap On. Plus it’s way cheaper

@leetgif 3 жыл бұрын

Thumbs up for being straight up honest.

@emiliog.4432 3 жыл бұрын

Replace those 5 tools with Chicago Latrobe drills, Milwaukee cordless, Knipex, etc...,Lots of better choices for those 5 tools.

@jddenson435 4 жыл бұрын

Starter switch, I got the heavy duty one, works better. The one u show is for cars. I love my cordless impact

@iCutWaffles 4 жыл бұрын

Cordless 3/8 14.4V impact is amazing.

@whatfreedom7 2 жыл бұрын

The cob penlight sucks too. I had a couple co workers who had issues out of them.

@donaldhollums3278 4 жыл бұрын

Good film and advice, Mr. Clay. If you need disposable tools go to Harbor Freight, especially for their hand tools. You can walk in there with your head held high knowing the locking pliers have a lifetime warranty with no questions asked when they break and you need another pair. Same for the drill bits, I’m not sure about the lifetime warranty on those. I bought the Actron remote starter switch from NAPA, $17.00. Yeah, it’s made in China. I reckon Snap-on’s is too, I don’t know. I looked at the Pittsburgh Automotive remote starter switch at HF and thought, “Naw”. I know Actron makes decent stuff.

@KoonTrucking 4 жыл бұрын

Shoot Snap On Locking Pliers have a lifetime warranty they just don’t hold anything and suck really bad ! Haha they are COMPLETE garbage that’s why they made it to #1 !

@donaldhollums3278 4 жыл бұрын

Koon Trucking It just goes to show anything Man-made can be garbage.

@nordicpride9708 Жыл бұрын

@@donaldhollums3278 Yeah and just because it’s made in the USA doesn’t make it high quality or useful

@megadethguym7977 3 жыл бұрын

Some really good drill bits I use are milwuakee drill bits went the 2 inch steel like butter I'm a steel worker they last a week with very heavy use worth the price

@John-yf4ie Жыл бұрын

The problem I'm having is just about all my tools and master Tool Boxes are Snap on. when they get older Snap on no longer has parts or the repair center states they no longer repair those tools. In 2009 I purchased a XT1700 Air impact wrench. Just 2 weeks ago I went to use this and no air pressure. I've always oil my air tools. I also have a 25 year old IR that needed repairs and I had it repaired in 1 week. Tried the same with my Snap on and was told it was discontinued by Snap on. I kept my receipt and faxed it with all the information and Snap on text me back and said they no longer repair this model. I found a local Snap on truck and he said he could give me a $100 off a new Gun. HE also said he traded in 20 to 30 of my type because no parts are available. He agreed and said a lot of snap on electrical and air tools when the get old no parts are available. That same day I order a Astro THOR. At least I can get this repaired!! LOL

@cableguy1924 4 жыл бұрын

I have the CT8850 I bought from a coworker for $100. He told me it was junk when I bought it from him. I bought it anyway...I know! Well, turns out, it’s junk!! I’ve used it 2 or 3 times and it wouldn’t even break the lug nuts on my motorcycle trailer! I’ve always had to go back to my IR air impact until here recently when I got on the wagon and pulled the trigger for the Milwaukee 2767-20 1/2” high torque bad boy! Great video once again!

@ben3462 4 жыл бұрын

Let me take it off your hands then

@Incountry 4 жыл бұрын

Damn, now you tell me..! Already have the Impact and the prep tool.!!!!

@davidwalle5025 4 жыл бұрын

Great video very honest. Most would agree with you

@gingerli5820 4 жыл бұрын

Very helpful, KT. Given what's available from the competition, Snap-On is simply no longer cost effective. From your demonstrations, I would suspect Chinese manufacturing. Many companies are living on their reputations earned in the past that are no longer deserved. Door to door hustling made Snap-On a name in the past. Given efficient delivery, people don't need to shop like that any more. Professional evaluations like this are very valuable for consumers to avoid making selections they might have based on name alone. In addition, I learned of the Irwin wrench here. Thanks.

@piercehawke8021 5 ай бұрын

I believe Irwin is the original Vice Grips brand

@MegaMino92 4 жыл бұрын

Other than Mac having their cordless tools made by Dewalt, I fee like the the Big 3(Snap-On, Matco, and MAC) have really fell behind on their cordless stuff. None of the techs I know have Matco cordless stuff. The price of what they’re asking is ridiculous considering how bad their reliability is.

@BADD400 4 жыл бұрын

Good video Clay.

@larogersii1 4 жыл бұрын

Good information from real case uses

@karlgregory8190 4 жыл бұрын

i agree the drill bits are over priced and they dont warranty them do they? as far as the 1/2" cordless i borrowed a friend of mine and that thing is heavy and really wasnt that strong. i am looking at the IR cordless and or the milwaukee. i also seen that milwaukee also has a the prep cordless tool that you can changed the RPMs on also. i would go with them over the snap on prep tool and 1/2 cordless.. i ever make it back to my home state i will stop by.

@KoonTrucking 4 жыл бұрын

Come on by ! We are there most of the time !

@andrewduff4719 4 жыл бұрын

I agree with #4 so much I bought one thought it would be amazing, Bought one and it sucked and had a hard time reselling it because it was such a turd!

@bullitautorepairsmobile4989 3 жыл бұрын

Same here got the 1/2 impact tried taking out a crank bolt all it did was vibrate ended up borrowing my mates makita ,No problem.Can’t sell it because it sucks .Stuck with it.Stop being cheap snap on .make a decent impact or lose customers, next thing you know they’ll be buying millwaukee spanner’s ,GET A GRIP QUICKLY

@chrismcgovern9454 Жыл бұрын

I bought item number one and let me tell you I've already warranted them out and they are still junk, so now they are lost in a tool box drawer somewhere lol

@jamesstreeter2565 Жыл бұрын

Appreciate the honesty, do you have alternatives to these.

@KoonTrucking Жыл бұрын

Just take a look at my channel and you will see. Just like the Mac RBRT bits I showed the Oem maker Grip Edge.

@vegaboy76 4 жыл бұрын

Agreed except for the buffer. Had mine for a while and she's still ticking

@phillipdewitt4454 Жыл бұрын

Only had one SnapOn purchase i regretted. A green racheting screwdriver with bit holder in handle. The bit holder top constantly fell off and the bits were lost. The screwdriver functioned properly but it didn't feel right in hand or pocket. Collecting dust somewhere in tool box.

@KoonTrucking Жыл бұрын

Yeah I had the same one and the top would come off when you used it. I actually forgot about it until you mentioned it or it would have been on this list also

@KM-bs1gf 4 жыл бұрын

You get 5 agreed fro me. Drill bit is drill bit, not worth 300. The battery power tools are overpriced than other brands in the store, and vise grip just be the Irwin Original.

@joshuabaker1604 4 жыл бұрын

My dealer even said them Vise grip suck and he won't sell them to me lol I have a pair of the grip on 1s that I paid 10 bucks off Amazon and not the best but dont use them much

@dickskinnersshopandsnapont6718 4 жыл бұрын

That starter switch does make a good toilet handle though

@p71nero 4 жыл бұрын

Surprised to hear that about the starter switch. We use them at my community college and they seem to do fine. That said, why bother paying so much for a snapon branded one when others work just as fine?

@cassiuspuckett8789 4 жыл бұрын

Why did Snapon get away from the Vise Grip locking pliers and go to this brand? Shoot, I have 3 pair of the Vise Grip pliers that I got from a Snapon tool truck and I thought for a long time that they were a Snapon item. But then I started finding them in parts houses and hardware stores. Just looking at the picture of the locking pliers you are showing look to be be of a very cheap quality. Thank for the video and thanks for sharing your thoughts on these (Junk) tools.....

@dyer2cycle 2 жыл бұрын

..I think they got away from the Vise-Grip made locking pliers when Irwin bought Vise-Grip and moved production to China..the new China-Made Irwins are absolute crap, IMHO..soft jaws, sloppy tolerances, not at all like the old USA made Petersen ones..but the good news is: Snap-On is NOW sourcing their locking pliers from Malco, Made in USA in the old Vise-Grip factory in Dewitt, Nebraska..they are awesome, check them out!...the locking pliers in this review are made in Spain by Grip-On for Snap-On..not sure if Snap-On is discontinuing those, or offering them alongside the new Malco USA versions...

@johnnydel6050 4 жыл бұрын

I liked the old m18 from snap on .l ended up letting go after 2 years and if u ask me that new 1/2 inch. Was way over priced so i never got one but when i looked at the spec s and saw it had 100 lbs less torque than the old one I was like no way I'm purchasing that and I was right cuz a few years after I seen all the reviews and how bad they were. I went with Harbour Freight 3/4 gun for a fraction of the price and I got to tell you not bad at all could have better battery but the gun is worth the money

@mathieubeauchamp7784 3 жыл бұрын

I bought The 1/2 " impact and saying it sucks is un understatement the motor last max a year so does the battery i had to open it trying to clean it up and regreese it, from the inside tou can see made in tawain i havent bougt a tool from the truck since

@KoonTrucking 3 жыл бұрын

That 1/2” was a total pile of trash. It was really bad. The newer brushless version seems ok