Snow Blower Carburetor Removal Fast and Easy! Under 10 mins! 👍 ❄️

Рет қаралды 37,198

Күн бұрын

Watch how to remove carburetor for the Troy-Bilt 2410 Storm Snow Blower in less than 10 minutes! The video is broken into 17 Step-by-Step instructions so it's easier to follow!
🚩 Help us grow this year and support this channel. Please subscribe and like and also visit www.ThatGuyReviews.com for more content!
🎬 Other Snow Blower Related Videos:
❄️How to Start a Gas Snow Blower: • Starting a Gas Snow Bl...
❄️Troy Bilt 2410 Snow Blower Carburetor Removal Fast and Easy! Under 10 mins! - • Snow Blower Carburetor...
❄️ How to Clean Carburetor Troy Bilt 2410 Snow Blower - • How to Clean Snow Blow...
TO SUBSCRIBE: / @thatguyreviews
📅 Video Release Schedule: Weekly
------------------------------
ℹ️ PRODUCTS REFERENCED IN VIDEO
Note: These links may be affiliate links and any purchases through these links will earn me a small commission at no additional cost to you. I appreciate your support and it's greatly appreciated. This will allow me to release more videos!
🟡Troy Bilt 2410 Snow Blower - amzn.to/3pMe4hn
🟡Gumout 800002230 Carb and Choke Cleaner- amzn.to/3rfzNyz
🟡Gunk CC3K Carburetor & Parts Cleaner w Drip Basket -amzn.to/3axdkX2
🟡10 MM Rachet Wrench - amzn.to/36FsM1Z
🟡Vice Grips/Pliers - amzn.to/3tqGMXp
🟡Steel Wire (28 gauge) - amzn.to/3aEl8Gp (Master Wire 100 ft)
🟡Steel Wire (28 gauge) - amzn.to/3txQHKH (The Hillman Group 100 ft)
------------------------------
🕑 Time Marker
0:00 - Introduction
0:28 - What You'll Need
0:52 - Focus Area
0:55 - Getting Started
0:59 - Step 1: Remove the four 10mm Bolts from the cover
2:27 - Step 2: Center the Throttle so it aligns with the gap
2:34 - Step 3: Remove the key
2:38 - Step 4: Pop Off the Choke knob
2:47 - Step 5: Remove the case
3:28 - Step 6: Disconnect the Primer tube
4:07 - Step 7: Remove the two screws from the internal case
4:33 - Step 8: Remove another case
4:52 - Step 9: Apply the Vice Grips to the Gas line to prevent leakage
5:39 - Step 10: Loosen the clamp to be able to dis-engage the gas line
6:05 - Step 11: Push the gas line out with a Flat head screwdriver
6:35 - Step 12: Remove the two bolts (10 mm) from the case
7:14 - Step 13: Gently pull off the case
7:59 - Step 14: Carefully remove the gasket
8:31 - Step 15: Carefully disconnect the thin wire
8:52 - Step 16: Carefully disconnect the thin metal bar
9:07 - Step 17: Slide out the Carburetor
For the more interesting content visit: www.thatguyreviews.com/
OTHER RELATED VIDEOS/PLAYLIST:
🎬 Home Outdoor Product Reviews and DIY Videos👍🏠
• Kill Wasps Easy and Ch...
#troybilt #snowblower #carburetor #diy

Пікірлер: 47

@ThatGuyReviews 3 жыл бұрын

Help us grow and support this channel! PLEASE DON'T FORGET TO SUBSCRIBE AND LIKE! and also visit www.ThatGuyReviews.com for more content! Much appreciated it & thank you! TO SUBSCRIBE: kzfaq.info

@ddmadcity 2 жыл бұрын

I followed your awesome videos for removing my Troy Bilt snowblower carb and the accompanying video for cleaning the carb and it worked PERFECTLY!!!! Super comprehensive and saved me a sh!t ton of money having to have someone come pick up and overcharge me for what was a very easy fix! Thank you so much for the great tutorial videos- YOU ARE THE BEST!!!!

@ThatGuyReviews 2 жыл бұрын

Appreciate the comment David! I was actually cleaning up my Troy Bilt machine this weekend and broke the darn handle bar. Discovered a bunch of gunk inside the fuel tank, but getting ready for the winter! Anyways, please like and subscribe if you haven't already. I'm trying to hit that 1k mark by the end of the year! Thanks again!

@luzinspired8721 2 жыл бұрын

I have to say, my snow blower had not been turned on in over 2yrs. Of course when I was trying it would not go on. I went on you tube to see how to clean up carburetor, sure enough. Did everything as you did and put it all back together and started right up like a charm. And we are expecting 2 feet of snow this weekend so I had to get it started. Thank you for your channel.

@ThatGuyReviews 2 жыл бұрын

Anytime Luz! I’ll be releasing more videos please like and subscribe to help my channel out! Thank you!!!

@robertleonardi953 2 жыл бұрын

As someone who isn't mechanically inclined, this video was easy to follow and I was successful in removing the carburetor. I highly recommend it!

@ThatGuyReviews 2 жыл бұрын

Thanks for the comment Robert! Much appreciate it, please dont forget to like and subscribe!

@herbertmiranda3973 Жыл бұрын

This video saved me MONEY!!!!! Not all about the money, but????? When in doubt search it on KZfaq. Your step by step was immense! All last winter couldn’t get it started for the first fall! I was pissed!!!!! Decided on this fall to do it myself with some guidance , and i would say thank you!!! After watching both video’s, Started RIGHT UP!!! Keep it going!!!! For the noobs like myself.

@ThatGuyReviews Жыл бұрын

Wow very kind words Herbert! Appreciate your comments and thanks for watching!!!

@fredgarvinsmagicalworldofs1931 2 жыл бұрын

I watched a few videos for this repair before coming across this one and this one is the best! Easy to follow steps that made me feel comfortable in attempting this job myself. I watched this video and the follow up on how to clean the carburetor. 45 minutes later my snowblower started right up! Can't thank you enough!!!

@ThatGuyReviews 2 жыл бұрын

Appreciate the comment Fred! Please if not already like and subscribe!

@ralphierodriguez9073 2 жыл бұрын

Wow amazing thanks I couldn't do it without your help I couldn't even sleep knowing there is a snow storm coming and my troy down you saved me follow his videos he goes step by step 😀👍👊

@ThatGuyReviews 2 жыл бұрын

Appreciate the comment Ralphie! Glad it was helpful! Please like & subscribe to help support my channel. Thanks!

@anthonybozzanca3776 Жыл бұрын

This was a very helpful video! The only suggestion I'd give is to loosen that bottom nut on the carburetor before taking it off. Mine was on so tight that I had to slide it back on the screws to hold it in place to get that nut to turn (which was no big deal). Great guide!

@melissasteffen1162 2 жыл бұрын

Thank you for this wonderful tutorial! It was so easy for my husband and I to fix our snowblower using this!

@ThatGuyReviews 2 жыл бұрын

I'm happy it helped! Please don't forget to like and subscribe so I can reach my 1k goal! Much appreciate it!

@dennisrphymurphy7929 Жыл бұрын

So cool. It's so nice that the 2 of you guys work on stuff together. My wife and I used to do it for years, until she got this toxic reaction from certain chemical smells. ....or maybe she was just saying that, lol.

@stevenroyer4271 Жыл бұрын

This is a very well filmed video. Great job. Thank you.

@ThatGuyReviews Жыл бұрын

appreciate the comment! thanks for watching

@dennisrphymurphy7929 Жыл бұрын

Hi... I liked and subscribed. ADDITIONAL INFO: .. I have a 420cc/30" cut. Things are a bit different than your snowblower and hundreds of other vids that I have seen, due to the size of motor on a 420cc. Just listen, ... you need to remove the drift cutters......stand it on it's face, ...take off both wheels.... remove the 4 screws that attach the handlebars, slide the handlebars aside... (pay attention to cables and such), and the carb will easily slide off the pins that they are on. There are 2 different screens on that particular carb ...190W, that may or may not be on your carb. I was made aware by looking on a site DonyBoy, I can't remember the other one, but there was a screw over top of a slotted piece of plastic on the side of the carb. I cleaned those 2 extra places, and my machine (2017) works better than new. I hope this helps somebody.

@Jeff-vj3jp 6 ай бұрын

I have the same snow blower. Followed your instructions to remove carburetor, clean, and reinstall which was easy. Added fresh oil and gas. Plugged in to start and it took a couple cranks and started right up. I let it run for two minutes and stopped it. I tried to start again, but no go. Just cranking. You think it could be the spark plug?

@davidleahy9637 Жыл бұрын

Very good video.

@ThatGuyReviews Жыл бұрын

thank you!

@brennonplayz8521 3 жыл бұрын

Wow cool

@ThatGuyReviews 3 жыл бұрын

Thanks buddy!

@gaellajeunesse2235 11 ай бұрын

Hey, my carburetor is like stock and don’t want to move what should I do??? I put some WD40 and it’s still don’t want to move.

@AROC1988AI Жыл бұрын

how do you remove the choke control lever? The plastic that attached to the knob broke and now I need to replace the whole rod. How do I do that without replacing the entire carb?

@dennisrphymurphy7929 Жыл бұрын

Hi... I saw those choke things on Amazon. There is a small screw on the righthand side if the carb for removal... good luck

@dennisrphymurphy7929 Жыл бұрын

What exactly does that real thin wire do?

@dennisrphymurphy7929 Жыл бұрын

HA... I got it figured out... it doesn't do much but it still needs to be hooked up.

@tommyleonardo2692 Жыл бұрын

So I clean it out and it starred, but now leaking gas so I changed the rubber o ring that is supposed to seal the bowl. It still leaks, can a bad gasket cause that or is the carburetor junk?

@ThatGuyReviews Жыл бұрын

sounds like it, i would replace the rubber o ring which you already did. how old is the gasket and carb?

@tommyleonardo2692 Жыл бұрын

@That Guy Reviews sorry, I'm unsure cause it belonged to girlfriends dad who passed away almost 4 yrs ago and it has sat this whole time. I'm just trying to help her mother out and get it running. The gasket actually ripped around where the washers are the come out. So it doesn't sit properly. I ordered a new carburetor cause I didn't see where you could order just the gasket. It doesn't come with that long rod that I believe the choke connects to. Does that rod come off so I can use the old one? It's the same snowblower you had in this video so it helped tremendously. Thank you for that.

@ThatGuyReviews Жыл бұрын

the rod is a separate part unfortunately. Sounds like you made the right move, over time rust can form and deterioration can set in if it’s not properly maintained. Keep us posted and good luck!

@dennisrphymurphy7929 Жыл бұрын

On my carb, there is no o-ring. I thought that was pretty funny, but there is not supposed to be one... if you put one in, it will leak. Good luck.

@debalenalang09 2 жыл бұрын

Mine starts but when remove from choke the engine dies. is this still carburetor issue? I tried to clean with seafoam but no go.

@ThatGuyReviews 2 жыл бұрын

Did you try to leave it on full choke for a few mins and then slowly dial it down?

@dennisrphymurphy7929 Жыл бұрын

NOPE... Seafoam works well on engines but not carbs. Find a tutorial on carb cleaning.... not the 3 minure cleaning, but a thourough cleaning... good luck.

@debalenalang09 Жыл бұрын

@@dennisrphymurphy7929 thanks for the reply. this was a year ago and I simply replaced the carb. works after that

@jiminchoi2343 2 жыл бұрын

When I tried to pop off the choke knob, the whole thing (the knob is still attached) popped off. Did I possibly break anything...? it does not go back in anymore.. I have to open everything tomorrow to see

@ThatGuyReviews 2 жыл бұрын

Offff you might need to open it. It should be snugged

@gmarie701 2 жыл бұрын

not to worry, the same thing happened to me. one of the two locking tabs at the end of that coke control shaft broke off but that just makes your job in the future easier when you need to remove the choke control knob. when reassembling, just make sure the choke butterfly valve is closed on your carburetor and then reassemble everything else per normal. then when you put the choke control lever shaft back in, just line up the pointed part of the knob to the closed choke position and push down to seat the control. mine works fine that way.

@ThatGuyReviews 2 жыл бұрын

@@gmarie701 your awesome

@jiminchoi2343 2 жыл бұрын

@@gmarie701 Thank you! It went back in nicely. :))