It was a fun little project to get ready for this coming weekend for Mud Jam 8. Hopefully have some good video and get into a few mud holes with it. Well see how well I did for it sitting for 6 years.
Пікірлер: 115
@chrisgarcia58552 жыл бұрын
That thing is badass!! I’m definitely doin that to mine!!
@MegaMIIKKEE7 жыл бұрын
That's dope bro I use the same exact quad that's motivation to make mine like this 🔥
@Richard-gy1fo4 жыл бұрын
Nice clean work area.
@SwampAss7 жыл бұрын
Looking good! Maybe I'll see you out there at Mud Jam. I'll be heading out there tomorrow after work.
@irishginger68876 жыл бұрын
Swamp Ass what time of year and where abouts is mud jam
@bryanbearsley84562 жыл бұрын
wow your 4 wheeler looks nice. my uncle has the same 4 wheeler you got, his is a honda too. i like the electric shift 4 wheeler's. honda's are awesome. i like your 4 wheeler so much. very nice
@tonyhall987 жыл бұрын
damn that thing is sharp , can't beat Honda
@jeffreymoran62344 жыл бұрын
I have one with 786 miles on it, I have 2 inch lift, outlaw tires,I keep up with the big boi's on that 4x4 ES 350
@joshuabeanblossom83713 жыл бұрын
@@jeffreymoran6234 do you have a gear reduction?
@FarmallFanatic4 жыл бұрын
Love my 350!
@loganbeddard79695 жыл бұрын
Looks great brother I prolly woulda added axle paddles
@singlepistonproductions32325 жыл бұрын
Picking up mine that looks exactly like this but it’s been sitting for 8 years
@fivehigh47186 жыл бұрын
how'd that front end hold up with those big tires? looks good, my bike, wore the bering seat out with big tires, Bering slipped in the race wore it so it didn't press in tight. mine is a 350 also. Heavy mud runs kill them poor fronts with big tires.
@obspowerstroke18644 жыл бұрын
I’m wanting to do a fo-4 or fo-14 exhaust on my 02 rancher 350 what do I need to carb for it to run good ? Jet sizes and it has a 2” snorkel on it already . Or can I just run exhaust and leave carb alone
@dantaylor5134 жыл бұрын
What did you do about the water in the motor when you got it? I just got one for 100 bucks has water in the motor told me smoked when they pulled the front plastics and seat off. I like your bike that's the look I'm going for
@davedaniecki41895 жыл бұрын
Does that exhaust long pipe do anything to your power? Is that strictly for water riding so it's not submerged? Thanks
@geemtz80257 жыл бұрын
Do u need to re jet the carb if I do exhaust and uni filter?
@johnny3eyes9007 жыл бұрын
👍🏻
@thomasfritts57246 жыл бұрын
Did you have to jet the carb with the tractor exhaust ?
@obspowerstroke18644 жыл бұрын
If I put a f0-4 or fo-14 on my Honda rancher 350 do I have to jet the carb or can I leave it alone ???
@drummer4hire4 жыл бұрын
I love old hondas ,but am a fan of the stock look not the crazy snorkle and exhaust. Looks good though minus that.
@davisprice82726 жыл бұрын
What brand are the disk breaks I have some of SuperATVs on my 300 and they do not have good pressure at the lever How are the ones on the rancher and do you know of any tricks to make mine better iv bled them several times and it doesn’t get better
@Sh3wuz5 жыл бұрын
Did u do a gear reduction?
@hardr71946 жыл бұрын
How did that fo4 without the exhaust snorkel I want something for my Suzuki that dosent sound like it's farting 😂😂 but it already has a muffled sound but
@christianhall92283 жыл бұрын
Yea I’m wanting one I think I’m getting one that is yellow
@michaelgorniak42577 жыл бұрын
What is the PVC you need for the snorkel
@brettknowles74473 жыл бұрын
I'm curious what size lift you got on there
@XxNANOSHIFTxX4 жыл бұрын
pulls good in mud with 28’s and no GR?
@preyforapophis3 жыл бұрын
What is the offset of those wheels? 2+5? Standard SRA rear wheels all around?
@bradyriggs5287 жыл бұрын
How did you seal gas cap?
@fred28456 жыл бұрын
Them Hondas are the best ATVs you could buy I had one a couple years back I beat the ever loving dog shit out of it I replaced every plastic an on it I can’t complain about Honda From the radiator being jammed with mud to being rolled over to being almost ran out of oil it took a liking and I finally just got rid with a rod knock probably had 12,000 miles on it
@Solitude3136 жыл бұрын
Yea this Rancher has done some things that surprised me completely. I love Honda's and just bought one this weekend.
@tyeneedham57522 жыл бұрын
I have that and mine was sitting at my cousins for a long time and the carborator and brake lines weren’t working and it has a lot of stains on then motor part by the foot breaks how can I get them off
@shevonnel98065 жыл бұрын
just wondering did you have to rejet the new carb and if so what did you use ? Doing the same build on my 2000 Honda rancher
@Solitude3135 жыл бұрын
I did tweak it a little bit. Mainly with the Needle and A/F Screw.
@bradleywalls29924 жыл бұрын
So did you not re jet the main or pilot jet?
@davidb52602 жыл бұрын
What website besides eBay do you use for tuneup parts?
@daviddavis23216 жыл бұрын
What is your secret on bringing back the life on the plastics. I think you did a real nice job on the bike.
@Solitude3136 жыл бұрын
Pretty much just a good wash and Cover All is all I use.
@MrGunner9456 жыл бұрын
SC1 High Gloss coating also works great for plastics, especially for bringing back faded plastics. It also helps with cleanup, due to the dirt and mud not sticking to the SC1.
@FoxRacing2387 жыл бұрын
Can u make a video of how you seal up your air box ?
@CalebWaddleMedia7 жыл бұрын
FoxRacing238 there are 3 main places where you need to all the seals as in where your snorkel come in around the carburetor seal and the hose on the left side as well as the screw on the outside and then the lip of your lid put silicone on that then just stick it on lock it up.
@crafty9276 жыл бұрын
if my bike dies underwater do I need a exhaust snorkel or idle up carb?
@dannyreid18455 жыл бұрын
FTW_Shadowz I have the same problem
@mitchelmathews70255 жыл бұрын
How did you go through mud with the electric shift solenoid because I heard if you get mud in it it will stop working
@laynewilliams23535 жыл бұрын
Thats true but if you seal it is fine
@jonathandaniels52307 жыл бұрын
Do you have to snorkel your exhaust? I had my Honda exhaust deep and it wanted to cut off. Any solutions??
@trevorcisco92204 жыл бұрын
You don’t have to snorkel it , but it is sometimes good to depending on the riding you do. With an exhaust snorkel it ensures you won’t get a drop of water in the engine
@gunnarwallace14277 жыл бұрын
Why the baffled fo-4 over the fo-14? Sweet bike
@Solitude3137 жыл бұрын
Just trying to be a little quite. Getting old I guess haha
@kaneblakeney56754 жыл бұрын
Do you think I could run 29.5 tires on a 350 2wd? With no gear reduction
@srvdean30243 жыл бұрын
hell no
@davidp734 жыл бұрын
What do you use to clean the engine? That brown baked on mud is hard to clean off
@Solitude3134 жыл бұрын
Eagle One Etching Mag and Wheel cleaner
@davidp734 жыл бұрын
SolitudeCustoms thanks I’ll give it try...nice videos
@darreon1k764 жыл бұрын
What’s the exact wheel set up here 28x9.5x12 all the way around?
@Solitude3134 жыл бұрын
Yes, thats it, on SRA Wheels
@calebsnell46006 жыл бұрын
Never really known but what’s the point for the exhaust snorkel
@Solitude3136 жыл бұрын
Just a little piece on mind, keep mud from packing up the exhuast.
@joeythompson94046 жыл бұрын
Do u ever sell any of your projects
@Hunter-cs1jg7 жыл бұрын
What did you use to get the mud stain off?
@Solitude3137 жыл бұрын
Eagle One Etching Mag Wheel Cleaner
@dylanprice64983 жыл бұрын
Im watching this after 4 years
@CalebWaddleMedia7 жыл бұрын
Where did you get your exauhst snorke or did you bend it yourseld
@Solitude3137 жыл бұрын
Caleb Waddle I just went to the local Muffler Shop and had them bend it up for me. 1.5" I'D with a 45* Bend then a 45* Flush Cut
@CalebWaddleMedia7 жыл бұрын
Ok thank you I have been looking into a better sounding exauhst and I like your ideal a lot. Not wanting to spend 300$ on a an exauhst
@ryanursery39157 жыл бұрын
what size lift kit on front and rear?
@Solitude3137 жыл бұрын
Just a 2" Highlifter
@jessejspivey16 жыл бұрын
Do you sell stickers online anywhere?
@brettknowles74473 жыл бұрын
Oh sorry I didn't realize it said it in the video
@Solitude3133 жыл бұрын
No worries, Just a 2"
@brettknowles74473 жыл бұрын
@@Solitude313 ok thank you
@dabonit9446 жыл бұрын
could u fix mine like this one
@bradyriggs5287 жыл бұрын
How do you snorkel the electric shift????
@Solitude3137 жыл бұрын
Whats there to snorkel?
@rzr8hunnid5177 жыл бұрын
SolitudeCustoms is there a gear reduction
@bradyriggs5287 жыл бұрын
SolitudeCustoms the angle sensor!
@hondaforlife12367 жыл бұрын
Where did u get the exhaust extension at would love to no. Thanks
@Solitude3137 жыл бұрын
Any muffler shop can bend you one. 90* to a 45* and cut flush.
@hondaforlife12367 жыл бұрын
Ok thanks
@hondaforlife12367 жыл бұрын
How much did they charge u?
@Solitude3137 жыл бұрын
$20
@hondaforlife12367 жыл бұрын
Did u get it at a shop somewhere around longview tx
@dwilson83705 жыл бұрын
Whats the offset on the rims you used on this setup?
@Solitude3135 жыл бұрын
They only offer 2, IRS and SRA. These are SRA all the way around to avoid wheel spacers on the front.
@dwilson83705 жыл бұрын
@@Solitude313 thanks for the response! I figured that's what ya did but wanted to make sure. I got the same rig in orange and like your setup. Thanks again!
@durtysouthkustomz88625 жыл бұрын
@@Solitude313 what tires are you running on there like name and size and is that a tractor muffler that you used to do the exhaust
@mcdangles12323 жыл бұрын
0:30 sounds like a crowd cheering
@kyleprichard98724 жыл бұрын
Where are you located I need someone to snorkel my bike
@Solitude3134 жыл бұрын
Im in East Texas by Longview
@lefloreoutdoorsman89534 жыл бұрын
Where did u get ur muffler and how much did u pay for it
@Solitude3134 жыл бұрын
Tractor Supply Company, only about $30.
@obspowerstroke18643 жыл бұрын
How is it not ticking my rancher 350 ticks bad on top end
@Solitude3133 жыл бұрын
It was a relatively new Rancher and the motor was never gone into. Also I just adjusted the Valves and tuned the Carb just right.
@buckdaddy75827 жыл бұрын
+SolitubeCustoms Ok Cool Thx for responding to me
@austinnewman76427 жыл бұрын
Does it have a gear reduction
@Solitude3137 жыл бұрын
Nom and it actually did pretty dang well this weekend, even in the thick stuff
@abbymorales63646 жыл бұрын
Do you sell Solitude Customs decals?
@Solitude3136 жыл бұрын
I need to find a good supplier and I will, I want to.
@yudasifuentes20686 жыл бұрын
Does it have a gear reduction in it?
@Solitude3136 жыл бұрын
Yuda Sifuentes No, not yet.
@yudasifuentes20686 жыл бұрын
SolitudeCustoms i was looking one for my rancher 350 es
@daryncochran61945 жыл бұрын
Does the owner of this Rancher have a channel?
@jacobhumphrey50487 жыл бұрын
How much was the exhaust?
@Solitude3137 жыл бұрын
Jacob Humphrey like $35 for the Muffler and $20 for the Snorkel
@johndutton71917 жыл бұрын
SolitudeCustoms hey man lookin at this 300 it's smoking he said that he just got new jug and piston put in but not rings or valve sell and it's still smoking would that be true or could it be anything worse? Thanks
@Solitude3137 жыл бұрын
Got to have the head reworked with at least new valves seals usually.
@johndutton71917 жыл бұрын
SolitudeCustoms what would you all do to make sure it it would work
@buckdaddy75827 жыл бұрын
First to comment
@Brandn432 жыл бұрын
Poor thing!
@davidbryant55694 жыл бұрын
$700
@buckdaddy75827 жыл бұрын
+SolitubeCustoms I have a 01 Honda 350 rancher the same color .
@Solitude3137 жыл бұрын
I had one set up this exact same way but I had a Gear Reduction.. It was a fun little wheeler.. I just dont care for the motors