thank you as well for this....I never seen a set up like this and when I took the plug wire of a predator power head that spring came flying out with it....had no idea how it worked....Thanks again.

Thank you so much for this! Just saved me buying a whole new assembly for my Ryobi power head. I thought I broke the wire changing the plug this weekend. EASY fix!

Watched several other videos! if I hadn't found you, never would've figured how to fix my spark plug! Close-ups Brilliant!!!

Thanks! You kept my mexican employed

I had difficulty pushing the spring by hand so i used a shard nail to start hole. Awesome vid saved $

Chris, Thanks for the video. I spent three minutes watching and five minutes on the repair and now the GF is out weed eating. Life if good! THANKS AGAIN!

Precise, straight forward, and to the point explanation. Great help

Thanks for the update, Chris. Much better all around!

thank you so much! I really appreciate the time you took to help others, very nice of you! this is just what we needed help on, for our 15 hp 1976 Evinrude. ( Now If I can just figure out how to put in the pinion spring...)

Way better video than the first!! Really appreciate you doing this!!

This was very informative .Excellent shots of steps and great suggestions . Perhaps the coil of my saw isn't shot but bad contact due to my plug changes !!

thank you ☺ this will help very well to fix my Problem. In germany spark plug boots are built complete in an other way. good work.

Simple when you know how, thanks for posting.

Thank you for the close-up photos at the end. That made it very easy to follow.

After watching video, I followed instructions and it went together like a charm. Thanks for your video!

Thank you! Plain and simple instructions.

You're a hero. I hate myself right now for how difficult I've made this.

just what I was looking for. Perfect!

Nice video. Quick and to-the-point👍

Thanks bud this is exactly what I was looking for.

Brilliant, now I understand how this is supposed to go together I've got half a chance of getting it fixed up on my strimmer! Thanks!

Fixed my mower after watching your video, Thank you!

Dude this is GREAT! Thank you!

Great video. Thanks for the help!

Great video thanks for the info. quick and simple easy to understand thanks keep up the good work.

chris thank you so much your video help me a lot now i can install one of these on my trimmer :)

This helped me out thank you Chris

Yep thanks,i didnt know how this went together!

Outstanding! Thank you so very much.

excellent video, very descriptive......thanks alot

thank you . helped me massively

Thanks for this video, saved me a lot of work!

Hi Christopher , thanks for this upload i have a old weedeater GTI 17xp i thought of trying to get it running again i have recently become keen in fixing old unuseable lawn tools i have i noticed the rubber booot of the spark plug is missing it has just a curled wire wraped around the tip of spark plug, would a new boot be needed to make it run ? thanks for your replies

Tnx for showing how to mount the spring you, sir are awesome. 👍

thank you sir. It helped alot. 💪

Chris Boyce, I have a situation I need advice withI have a Stihl Weed eatter FS 56 RC.I broke the connect end to spark plug from coil.Coil is fine, it's the other end that goes into boot looks like silver coil spring.Goes over plug.It snapped off right at end of black wire.Was not thrilled to buy a new coil, so holding off till see what options are.First, I need to splice and extend wire.Factory long is a joke.Thinking cut solder another wire to extend, heat shrink splice? Next my issue is where can I buy a crimper end so it'll go over plug and what are they called?

Nice , live and learn !!

Great Video - thanks

The coiled wire that crimps into the plug wire, is what makes the connection. As long as it's crimped into the plug wire (through the rubber coating, your good.

My Ryboli spark plug cover was hard rubber. Went to Auto parts store and ordered old school 45 degree cover made of soft rubber. Cost me $3.90

Thank you.

Liked and subbed thankyou I thought I was screwed

Spot on now i don't have to pay anyone to fix it

Thank you

Thank you!

Bloody legendary

Awesome 👌

Brilliant video thank you

If I order a replacement boot, is the spring wire typically included?

I couldn't get the coil into my Stihl 450c blower boot after using oil and tried it 15 times, so I had to solder the wire to the coil and leave the boot off. If corrosion isn't an issue with it being left outside, than I can live with my fix if it holds up.

Tried this just going to get one of those msd ones now , it was obviously put together bad it ripped off leaving the spring on the spark plug

Thanks! My Stihl was slightly different, but the basic technique really helped

The spring is part of the spark plugs wire kit from Sierra.

thank you

I was told that the old outboards needed to use copper core ignition wires to work properly. Are you aware of this requirement? Your replacement wires appear to be steel?

Do you know if I can swap the rubber boot on the end of the wire from a hedge trimmer (jonsered ht21) onto a small chainsaw (sthil ms180) or do I need to buy a new one?

How you install I need to replace my thank you

problem is my boot isn't a right angle so I can't feed the whole wire through it first. It's a harder angle

I didn't know it was that easy

How you install

I use dielectric silicone grease.

Please respond back w/ the spring coil size and where it can be purchased...thaniks

DON'T STRIP YOUR CHAINSAW PLUG WIRE

What kind of fuckery is this spring contraption? Bring back the crimp style and they won't keep falling off. Ridiculous design.