I love seeing this. I learned to paint exactly the way you do. Time is money. The "professional" divas will say that's not how it's done. But they're painters. And I work each panel myself, so I know where they've been. Experience is an amazing teachers, and you do great work, even when constrained on time or cost.

Color goes well with the rsx, I always thought acura should have used midori green as a factory color. The light greens look great on this chassis.

Been majorly stressing out about painting my car, all the steps needed to take, 100 different products etc. Amazed at what ive just watched and the results, fantastic job. Sub'd

Nice learning from your years of experience! More knowledgable with when to paint, how to lay down and the material of the clear coat. Awesome job for a budget Acura/Honda paint job.

Let's goooooooo. Good start to the long weekend 👏🏽👏🏽💪🏽

That penny trick really helps! I’m shaving and engine bay and building a bead to fill the holes can be difficult without burning through the sheet metal. Also, beautiful job bringing that RSX body back to life.

time and patience in prep work yields an amazing base canvas for the paint. i think this price point is great for track cars and seeing the clear not drip once is so impressive. when I laid down clear years ago I had a few run spots. wish I had the space to do it but one day again maybe! love the content.

It looks really good for 400$. Thank you for going in-depth with your explanations!

Mr Marco you have the natural ability to make things beautiful!! Sheet metal artist for sure!!

Going to be painting my Project Accord Wagon and this is helping me out as there is so many variables to car painting!

Love your videos very helpful your so real good or bad helps me because just paint my car and had run city on my clear so sanding down whole car and try again but because of you didn't get mad just a learning experience thanks for being real !!!!

Great jobs man . Color on that car look hella hot. After seeing this remind my old 1992 acura integra gsr , I had her for a long time unfortunately I have sell her due of pandemic and needed money. Nowadays it’s getting rarer and people selling like crazy I get it becoming collectible now. Keep up the good work and keep uploading more videos

glad i stumbled onto your video. it was nice to watch you do a realistic paint job. My car is not a show car. if I ever DIY a respray, this is probably exactly what im going for. it looks great, its not perfect, and it doesnt break the bank or take 100 hours.

Very first video I've watched of you, good vid and an awesome looking paint job.

I did the top of my "95 Ram 1500 in the stock grey w/champagne tint in the clear, but used Toyota/Lexus 6V4 "Spruce Mica" below the belt line. Left the front bumper chrome but painted the plastic 'chin strap' with the green as well as the back bumper . Wheels? They were factory steelies with the chrome center caps & stainless trim rings, so the steel was painted green, too. Any of the black trim, ie the bumper step pad, bumper lower air dam, mirrors, cowl vent, wipe arms...either replaced or "Trim black" sprayed. I sold it over 18 months ago, the buyer told me people still comment on how great it looks. It was solid, standard cab, shorty 4WD. Even the dash was in 1 piece, lol😅- I did get a premium for it, but it needed nothing

Would love to see a follow up video showing you fixing the hood halos. Is the owner going to have you cut in the rest of the car? Great color choice btw 👍

Thanks for showing us the products you use. Great content

Telling you. Ive been doing this for longer than you. And you are 100% correct. You can get a great paint job outside. Period. Only suggestion is try to get under anything. At least a pop up canopy. Leaves love to fall into wet clear. The sides. Not so much. But we all know. Clear can repaired easily. Soooo do it!!

Nice job might be painting my 93 mustang a very similar color, I used the smr42 on my 81 mustang about a year and a half ago its a decent product way better than the shopline equivalent price wise and looks wise and easy to use, only thing i can fault is for is it had a fair amount of shrinkage in filler spots but i wetsanded with 2500 and then buffed it since i did three coats and they came right out. Really easy to polish unlike others ive worked with.

great video! soon as i get my garage im going to try your products. once i get good enough i plan to redo the black paint on my 2000 suburban. im thinking the single stage with clear on the top like your other video

I wish I could have you paint my rsx I’ve been wanting to change the color but I have allot of work to prepare the car for paint (dents and a few rust spots not big though) but I’m a man who owns a few tools and no garage but I’ll figure something out but tbh you did an amazing job dude it really looks like a 2K job you gained a subscriber today keep up the amazing content 🙏🏽

Sheeeesh! That ending was sick! Love that color

Rainy day I love great job as always bro I love the products ive been using the clear for a few years very satisfying with it

Marco that car looks great! You are a magician my brother

🔥🔥🔥🔥🔥 nice job!!! Love the color 😉

Good job that thing came out well ,i need to try that speedkote paint for my next project

Cool color and definitely looks better. 👍🏽🏁🏁🏁

this is the best work and the best comment, a wonderful person and does not cost much, subscribe.🎉

That is a really nice color for that car great work 😁

your diligence is very inspirational!

I did the quick scuff and shoot. Love them. Idk maybe gonna try to experiment on fades. That’s what I’d like to try. Did 2 tone. That’s fun too prov is hard to find right body lines to cut it. Nice color love it man. How do you match the jams?

Looks great 👍 nice job

😂😂 he had me rolling in laughter when he said "you need a raining day dork" 😂😂

I may do this color on my 92 integra!! Thanks for making the vid!

Green with Envy...came out nice! 🍻

Omg 😲 that's sick awesome

You did an amazing job.!!! 👏

Can you do a comparison to the Euroclear vs SMR 42 one day? I shot the SMR42 (slow activator , 5% reduced) and was impressed (no more orange peel or loss of gloss the day after!!!). I'm going to try the euroclear on an overall to see which has the best gloss and DOI. Awesome products.

Great video, thanks for enabling guys who are trying to get things done on a dime! I've got an Integra for sale that needs the Honda/Acura silver, does Speedokote carry something like this?

Hey great job brother 👏, just brush others negative comments under the table, I been top coating, color coating u name it for the last 30 years plus, I done affordable jobs for customers, trailer, stock cars, drift cars, industrial loaders trucks 🚚 u name it, vehicles like these get well used and knocked around anyway... My customers mouths drop when they pick it up,that's how I know my customers happy and with the price... Keep it up brother it's a lot fun also...❤from New Zealand supporters

I love this. Its exactly what I'm looking for. I dont want to pay thousands of dollars or pay Maaco and have the job come out like something I could have did myself. I'm also not comfortable taking the car apart. I just want something presentable. I just wished you would have explained what you were using and the settings on the paint gun, size of the compressor. But thats because I'm a super newbee. I love the tape off job you did. I want to use the same products.

That looks fucking NICE. Good work!

I gave it a like as soon as it hit 25 seconds 😂😂😂 “you don’t need a paint booth nerd it was the perfect day”

Looks great!

I need to head your way boss love your work

Man I just started following and already learned the penny truck I been there and sure wish I would have known that before

I like all the new charger colors thinking of doing my ls swap s10 In one of them

It came out really nice bro...

u did that my brother great job love it

Beautiful colour 👌👌👌

I bought it the jet black single stage . My question is do I need more than a red scotch bright on the panels that don’t need any body work . 05 Yukon super nice body panels and doors just needs some black

First RSX I've seen on KZfaq with a Wings West or partial Wings West kit, I have a full kit but I rarely see anyone with them

Great job, beast green I've ever seen

Great job! If I’m going to do my own car but I want reasonable to best products what would u use?

Very nice

Hands down favorite color so far

A serious banger bro! Thanks for the penny trick. I dig the color on this teggy 😎

I'm doing Mazda soul red on my 98 grand prix soon. Just ordered a gallon of the base yesterday

People commenting on how you’re doing everything wrong don’t realize every paint job doesn’t need to be car show quality. Some paint jobs are just cheap to make a car look better. There’s room for both, and the car looks great afterwards. Great job

For the money hands down a great color and clear came out nice, completely agree a cool rainy day was the best advice given to me when I painted my car in the garage.

Super nice!!!! I have a Civic EK I am trying to "restore". The closer I get to the paint process I purposely find another "issue" to fix, before I paint it! It's a daunting process! lol But, I decided on speedokote clear! Now I have to figure what brand paint and primer! lol What do you recommend using as paint and primer to have speedokote go over? Thanks! Charlie-

Man that’s a cool color!

Had a Harbor Freight cordless drill do the same thin as your sander. I think dust in the motor was the cause of the smoldering smoke.

looks great

Would I need to use a flex additive on the plastic bumpers at all? I am using single stage black paint and 2k primer and sealer

What do you think on a bayside blue 2 phase, on a Audi S4 B6? Thank you and very nice work

There will always be people flapping their gums about how things should or shouldn't be done. Paint looks great and that color is sick with the black wheels. Nice job

This video makes painting a car a real learning experience. Not a lot talking or BS just Do . 😊

. My dad was a body man and only used DuPont or Sherwin Williams for customers. Fantastic product but way too expensive now days. My question to you, what line do you recommend for a paint job on a resto mod? I’m doing a 2001 Lexus Is300. Planning on keeping the same color but most of your videos are about cheap cut and spray? I want something that’s gonna last for a while.

how did you get away with doing an overall without it drying too fast on the second go round? When I used this clear doing a jeep i had crazy gloss retention issues. I was using medium on a hot day. I assume you sprayed under 80-85F? The clear is awesome on spot jobs (good enough for luxury car repairs). I assume i didn't move fast enough around the jeep. That's why I'll use the regular Euro clear (slow) on my next overall.

Nice work , just wondering if the door jams were painted also

This video is so satisfying🙏🏾

Turned out good

Teach my the way sensei!

That’s a dope ass color man if you don’t mind letting me know the color code on the both paint color and base coat 😬 I tried looking for it on the description of video thanks man 🙏

How long did you wait from the intro coat to the main color base coat?

Love the work And the color Let them hate

Went on website to look for my paint code and order. Never used before but was going to try it. Only seen qt kits and couldn't find color codes.

Is there a general rule when it comes to dealing with the sanding of clear coat that has failed? Is there any cause for concern about the surrounding clear that hasn't quite failed yet failing soon after underneath the new paint or is that not a thing? I picked up the car with some trouble spots and looking at the clear it seems extremely thin. Someone went through a lot of effort for a full color change but just washing the car. The water gets under the clear and then all kind of gets wavy and would come off in pretty sizable sheets. Thanks!

I would of really liked to see a 3rd coat of clear on the car. But 2 heavy coats = 3 thin coats in my book. It just needs enough to cut and buff if needed and to nib out the trash. 😊.

Damn nice job 👍

I put a Kia soul color on my g37 coupe because I like the copper pearl

Not a fan of the color, but it looks great. Should have done the 05+ VBP

I put a Ford mustang colour on my Holden commodore vz ute, it was the best grey that I found, was a toss up between the mustang j7 and the new 300series toyota landcruiser

looks good I wanna do my f150 in oc2 aka world rally blue

Ferrari red is a color that looks good on other brands of car Now, about painting outside ... This is more for quality control and compliance with air pollution laws. For DIYers, it can be done, but bear in mind, it may require additional work in polishing and color sanding. Even in a paint booth, you still get nibs in paint that need attention. IMHO, primer is best sprayed outside, where over spray won't be too much of a factor (gets it out of the shop). Ditto for sanding - best done outside. Just my 2¢

damn that's a gorgeous green

that colour is 🔥🔥🔥🔥

Ok…new subbie here. Appreciate you...Now I just gotta find a car find a car to bring to you for $400+ 👍

Color reminds me of green goblin. Looks good!

Marco ....did you know...on the factory robot painted cars....the " spray head " spins ( thousands of RPM ) and paint comes out in a cone !!!......brutal ! ...no way to do that in the after market...not even Earl Shibe got that secret ! ...hahahahh

Hello friend, congratulations on your work, where do you have your workshop?

WHAT GRIT DID YOU USE TO SAND THE BODY?

I really like the job. But why didn't you spray it the same as the original paint colour? When you open the door or bonnet wouldn't you see different colour?

First thing you did was sand it down, when do you know when your done sanding down the car? Before applying base coat

Looks like a nice color

Hey bro, I really like to know where is your shop. I know you are in central Philly, but where in C Philly.

Does anyone with experience have a recommendation on what brand or type of sealer,primer,paint, reducer,hardener etc? I've heard many times some brands aren't compatible with other brands but I don't know which ones those are

Nice Work Man! What equipment did you use?

Did the paint cost 400$ or the whole job cost 400$.. assuming the paint, how much did that job cost the customer? Came out wicked nice!! Jon. Also wundering where your located? Lmk thnkz