Speedy's Garage Hellcat Pulley Upgrade on GoManGo For More Boost!
Рет қаралды 52,573
5 жыл бұрынJoin the Channel! / @speedysgarage
Stuff I use:
Race Ramps: amzn.to/2Sicrdt
Race Ramp Low Profile Extension: amzn.to/2MhlDLa
Tire Rack: amzn.to/38X0foa
Cordless Ratchet: amzn.to/2tIMKIK
Cordless 1/2" Impact: amzn.to/2MlxMyL
Cordless 3/8" Impact: amzn.to/2sPLm6K
Ratchet Set: amzn.to/2QbKsJK
Wrench Set: amzn.to/374jt9R
Hellraiser Pulley: shop.ostdyno.com/shop/shop/he...
Tuning: shop.ostdyno.com/shop/shop/he...
Impact Gun: amzn.to/2XyeeL8
Dewalt Impact Driver: amzn.to/31jKyn9
Dewalt 3/8 Low Power Impact: amzn.to/31e2JL2
Magnetic Nut Driver Set: amzn.to/2MyJmZM
Torx Socket Set: amzn.to/2KEWYAp
Inch Pound Torque Wrench: amzn.to/2WmUQPN
Panel Removal Tools: amzn.to/2WUbLxq
Today at Speedy's Garage we're adding a bit of power to our Dodge Challenger Hellcat GoManGo with a Hellraiser pulley upgrade for the supercharger. I went with the 2.72 version for max performance and the decoupler tech built in that keeps the stress off the blower snout. This pulley is made by Litens who manufacturer the stock supercharger pulleys for the Hellcat, Demon, and Redeye.
Don't forget to checkout my website
www.speedysgarage.net
Like us on FaceBook if you do that kinda thing / speedysgarage
Follow on Instagram
/ speedys_garage
Music By:
Joakim Karud / joakimkarud
Dyalla Swain / dyallas
@ruthepooh65 5 жыл бұрын
Man, There’s a lot of Great info on this step. 2 Belt Patterns Clips,Bolt Pattern on the Supercharger, Them little O Rings. This is a Must Video for Us Hellcat Owners! Once again I Appreciate this Extremely valuable content!!💪🏼👍😎
@cfm17hellcat11 5 жыл бұрын
Your thoroughness is amazing. From starting with a tool list and insuring the viewer uses visual inspection skills are part of what sets you apart from some of the other how to videos. Thanks for sharing and I’ll patiently wait for Part II.
@HvyMetal4Ever 3 жыл бұрын
Love that fusebox cover. The same people made me some products almost 9 years ago, and it still looks just as nice. Hoping to be in a Hellcat soon. This video will help tremendously.
@Happydaz1933 3 жыл бұрын
I really appreciate the time you take to explain even the most minute details....great video bro. You save us mistakes.
@dwtrksvc 5 жыл бұрын
Love how much more informative you are with your videos.
@jblaze1299 4 жыл бұрын
Fantastic video! I dig the way you present the information, which is interesting, factual and non biased. Thank you!
@kirikos65 5 жыл бұрын
Great video ! I will use the same pulley. Have s great weekend !
@curly239 5 жыл бұрын
I'm loving your channel! I always wondered what was making that sweet whine when you get her upwards of 4 grand! Now I know!
@greganderson1989 5 жыл бұрын
Another great video. I recently did the 2.85 with Demon injectors. Man it’s a whole new car.
@ADR-X-HPINDY 5 жыл бұрын
Fantastic info . I use Mike at OST dyno also . I'm waiting to see your final results.
@weekendclimber 5 жыл бұрын
You're getting better at the cliffhangers!!
@redghostsrt 5 жыл бұрын
Thank you I have been looking for someone to make a video about this pulley please give an update.
@MegaNightmen 5 жыл бұрын
As always a top video. Very informative. Thanks for that. Greetings from Germany
@SpeedysGarage 5 жыл бұрын
Danke!
@hellcatredeye-g6582 4 жыл бұрын
I’ve got a 2016 scat pack 2018 shaker and I just bought a 2019 hellcat redeye what a difference with the red eye 😏💯👍
@officialshaunn3254 4 жыл бұрын
If u want a redeye an u have a hellcat.. -Get a 2.72 Pulley -Redeye Dash & Gauges -Unlocked PCM -Badge Swap 😂
@EastCoastJeepSRT 5 жыл бұрын
Great channel. Your explanation is EXACTLY why I’m going with a Littens 2.85 clutched pulley over a Metco for my Trackhawk.
@trimecm1611 4 жыл бұрын
Seeing that the aftermarket is smarter then the manufacturer, It’ll be a good idea to keep a shoe box, broom, and dust pan in the trunk
@willieshoemaker8680 5 жыл бұрын
Great video speedy cant wait until next week...!!
@leonardrice2830 5 жыл бұрын
That pulley is a winner! Perfect! Takes unnecessary inertial moments of strain out of system.🤔
@pyrocrew13 Жыл бұрын
Where did you get the “got boost” throttle body cover
@nhra7110 5 жыл бұрын
Thanks for sharing!!
@chadfeyerabend3588 5 жыл бұрын
Great video Speedy!
@posner2 5 жыл бұрын
Are you/or did you upgrade your fuel injectors?
@jackstandmafia8611 5 жыл бұрын
Good stuff Speedy!
@rielfast4844 Жыл бұрын
Good catch on that O ring
@DriveBreakFixRepeat70 5 жыл бұрын
Injector change? This is great stuff, Im following right behind you with my 19 Kitty. Doing mine in piecemeal instead of buying the kit to save some $$$ over time.
@SpeedysGarage 5 жыл бұрын
Stay tuned :)
@aaronferguson47 4 жыл бұрын
Also whats the part number for the power steering pump
@oscar.d1476 4 жыл бұрын
Will it fit on a hellcat redeye
@RS3_WAY 3 жыл бұрын
What’s that got boost thing
@waltercox2207 4 жыл бұрын
Clean and neat uninstall! Thumbs up!
@Saiyan4658 5 жыл бұрын
My tuner (Jay Greene) has already seen 9.90s on a 2.85 pulley in good DA (~ -100 to -400) and super safe tune. Thats my goal is to run a 2.85 on pump gas to the 9s. With race fuel it will be easy. Great video Speedy!
@robertdeida9834 3 жыл бұрын
Man this car is killing me, I asked so many questions and never get a str8 answer I believe the cat I bought has a metco pulley on it, after removing the cap there is an “8” on the front side of it, but it’s running a stock belt which I just don’t understand. Why doesn’t metco mark their pulleys with size ? The belt is a 68207171AD. What does the 8 mean on the pulley? And can you run a stock belt with a 2.85 I’m lost right now
@adolfogonzalez1305 5 жыл бұрын
awesome video. which oil breather did you buy?
@SpeedysGarage 5 жыл бұрын
It's the Metco one.
@edfernan5815 3 жыл бұрын
Do you keep the "got boost " billet cover on, love it and went online and looked fr it but they recommended not to leave it on. I would like your honest opinion. Thanks Sr.
@SpeedysGarage 3 жыл бұрын
I've never taken it off, but I did use a little double sided tape.
@mattholmberg6191 5 жыл бұрын
What would happen if you put the supercharger from Go-Man-Go on the 4Runner?
@SpeedysGarage 5 жыл бұрын
It wouldn't fit as the 4Runner is a V6 and GoManGo is a V8, but if you could somehow get it on there the 4Runner would probably make less power as it takes about 100 hp to turn the Hellcat blower.
@TheBigghost260 5 жыл бұрын
Good Video Sir!
@jameslawhorn146 4 жыл бұрын
Have you considered doing a supercharger spacer?? Was thinking about doing it on my 15
@SpeedysGarage 4 жыл бұрын
Mine is running pretty good as is, no plans for a spacer for now.
@jameslawhorn146 4 жыл бұрын
O I believe ya lol..just Figured replacing the stock potentially problematic gaskets while lowering supercharger temp and making more power for minimal money is just a no brainer especially with a pulley change.
@jamesseaman6919 2 жыл бұрын
I think you should go ahead and spend the money for the gasket set! Any time you go into a roots blower , you need to replace the gaskets!
@SpeedysGarage 2 жыл бұрын
You can't (or couldn't) get individual gaskets when I did mine and the whole kit was $$$. Was better for me to re-use them and I've not had any issues in several years now. Have to be careful during removal/install though.
@tylerfowler539 3 жыл бұрын
do i use the stock belt i ordered mine and they didn’t send me the belt
@SpeedysGarage 3 жыл бұрын
Mine had a shorter belt with the 2.72 pulley.
@paulczartorski909 4 жыл бұрын
How much more power can you get with a pulley upgrade?
@SpeedysGarage 4 жыл бұрын
As much as you'd want I reckon. Figure about 20HP per pound of boost added.
@a.a7648 5 жыл бұрын
People where is the 2nd part? can not find it
@SpeedysGarage 5 жыл бұрын
Stay tuned, it goes live next week.
@jasonschmidt9569 5 жыл бұрын
When will you dyno this car again?
@SpeedysGarage 5 жыл бұрын
Stay tuned.
@paulhyde4899 3 ай бұрын
Do you absolutely need a tune when installing this pulley
@SpeedysGarage 3 ай бұрын
yes
@paulhyde4899 3 ай бұрын
Do I have to use HP or can I use my Diablo
@_hashtag 5 жыл бұрын
How much would you charge to do my TrackHawk? 😀
@muscleonly1 5 жыл бұрын
How can I get one of those Mrs Speedy calanders
@SpeedysGarage 5 жыл бұрын
LOL - those are for me only 😍
@keithsmigielnpdc6547 Жыл бұрын
Where is part 2 of this series
@SpeedysGarage Жыл бұрын
Most of the "how to" stuff is in the Members section.
@nandiito Жыл бұрын
Where is the 2nd part to this video?
@SpeedysGarage Жыл бұрын
It's in the Members section. There's a link at the end of the video.
@nandiito Жыл бұрын
@@SpeedysGarage I already got it done, but thank you anyway. Your videos are great help! Detailed, loud and clear 👍🏼
@ddredeye8287 Жыл бұрын
@@SpeedysGarage i am looking to change lower pulley on my Red Eye. You know if there is a video on that? Thanks James from Little Rock. We met at MoParty last year.
@jesselent7894 3 жыл бұрын
How long did the labor take?
@SpeedysGarage 3 жыл бұрын
Couple hours if I remember correctly. Pretty easy.
@jesselent7894 3 жыл бұрын
@@SpeedysGarage thanks man
@4k_custom 2 жыл бұрын
What belt do you use ?
@SpeedysGarage 2 жыл бұрын
The one that ships with the Hellraiser pulley.
@4k_custom 2 жыл бұрын
@@SpeedysGarage The reason I ask is because I’m rebuilding a hellcat engine and it came with a 2.65 pulley and the green belt is very lose. I looked online for the diagram to make sure I have the belts connected properly and I do . So my only thought is maybe the belt is too big
@4k_custom 2 жыл бұрын
@@SpeedysGarage I am assuming that it might have a part number. Because I’m pretty sure the belt is going to wear out eventually
@SpeedysGarage 2 жыл бұрын
Take a look at this one amzn.to/2W97vvj
@aaronferguson47 4 жыл бұрын
What size pulley come on thellcat redeye
@DanielLopez-og7xz 3 жыл бұрын
Which one adds more horsepower 2.85 or 2.72
@SpeedysGarage 3 жыл бұрын
2.72 if you're running the right fuel. On pump gas they'll be about the same.
@donaldlovins6568 3 жыл бұрын
Probably a stupid question, but why does the SC "hat" have to be removed? Can't you just remove the SC as a whole?
@SpeedysGarage 3 жыл бұрын
You have to remove the bolts that go through the hat to get the SC off.
@donaldlovins6568 3 жыл бұрын
@@SpeedysGarage Thanks. Good to know as I will be doing this to my 18 Trackhawk next month.
@zacnorris6354 5 ай бұрын
You never installed the pulley and I'm searching around trying to find the video. No links to the next video. I feel cheated.
@Cjpc61 Жыл бұрын
We’re the 2nd video??
@SpeedysGarage Жыл бұрын
A lot of the "how to" content is now under the channel members section.
@Cjpc61 Жыл бұрын
@@SpeedysGarage thank you!!
@brandon8819 3 жыл бұрын
All that for a pulley change? Daggum.
@kylebrundage6691 5 ай бұрын
Bout a 100hp increase for little to no money
@ChristoherWGray 4 жыл бұрын
Standard exercise Just turn up the boost Without the other neccessry mods Knock knock Who's there? Its Rod - Let me out ! Could never understand why people cant be happy with the stock hellcat HP and jeopardize a very expensive drivetrain
@SpeedysGarage 4 жыл бұрын
LOL, that was funny. Folks like me don't leave anything stock for long. When things break I just upgrade them. That piston/rod should have never failed, but is what it is. Car's kicking butt now with a 9.83 at 141 MPH in the quarter and we're just getting started.
@jesselent7894 3 жыл бұрын
@@SpeedysGarage what’s your mod list now?
@cooterbaby3360 4 жыл бұрын
10.0 😂😂😂👎
@SpeedysGarage 4 жыл бұрын
Well, on demand at least LOL. That's the street car class limit I typically see to avoid a cage.
@cooterbaby3360 4 жыл бұрын
@@SpeedysGarage just giving you a hard time...im a die hard ford fan 😎
BalcevMMA_BOXING
Рет қаралды 4,5 МЛН
BalcevMMA_BOXING
Рет қаралды 9 МЛН
National Speed
Рет қаралды 16 М.
Precision Garage Customs
Рет қаралды 3,1 М.
David in HD
Рет қаралды 11 М.
David Van Voris (Coyote Direct)
Рет қаралды 103 М.
Мастерская Синдиката
Рет қаралды 4 МЛН
Авторазборка
Рет қаралды 1,2 МЛН